Search Documents

By Pablo Herrera

Para el cuidado de los equipos móviles, se requiere de un plan matriz de monitoreo de condiciones, donde se defina un estrategia que optimize el sistema en equipos móviles de gran equipaje. En este sentido, el presente texto señala cómo el mantenimiento predictivo se puede incorporar dentro del ciclo de mantenimiento general a través de resultados que afectan directamente el negocio como el aumento de la disponibilidad de activos físicos de la industria.

Jun 1, 2014

By David Sutherland

The treatment of a complex orebody requires a thorough understanding of its mineralogy. If there is a poor appreciation of the mineralogy involved, difficulties can emerge with the efficient exploitation of the resource. Recently, there has been a lot of interest in automated image analysis systems, which aim to improve the reliability and accuracy of the data, which can be gathered. In this sense, the paper point out the process mineraloggy for complex ores. Mineral modal analysis a description of texture and liberation studies are the basis of these measurements. They have been applied to a wide range of mineral systems including copper, lead, zinc, silver and gold.

Sep 13, 2001

By Egonk Arriagada, Brindel Barzola, Peter Leckie, Greg Zwolak, Gilmar Guzmán, Germán Chen

Newmont’s Yanacocha operation in Peru presented an especially challenging environment for reliable cyanide measurement and control, processing 3 semi-distinct complex ore types with feed Cu ranging from below 250ppm (as CuCN) to more than 5000ppm, and feed S ranging from low to 5%, resulting in cyanide consumption from as low as 1.5 kg/t to as high as 3.1 kg/t, and gold recovery ranging from approximately 57% to about 78 % (average plant performance based on the type of ore). A literature search by the authors to identify a method for accurate cyanide determination that was also suitable for automation settled on the work of Breuer et al (2011) as a basis. Early challenges in adapting the laboratory technique for the ‘real solutions’ and the range of variability experienced in the plant are discussed, as are other operational challenges due to the complex and changing solution chemistry.

Sep 30, 2022

By Mauricio Estrada, Luis Vilchez, Luis Valencia, Marco Vera, Italo Manzo

Flotation is the most used separation process worldwide. Flotation characterization is usually carried out in batch conditions at laboratory scale. A phenomenological description of the flotation process is challenging, however, the evaluation of flotation performance in a contextual manner by means of a pilot plant is beneficial to reduce uncertainty on metallurgical results. In addition, leveraging pilot plant results by digitalize them helps describe the process dynamically. Consequently, flotation pilot plant testing allows a Digital Twin (DT) to be generated by combining ore characteristics, process information and a digital architectural platform. Therefore, the generation of a Digital Twin of the flotation pilot plant provides a tool to explore and evaluate new operating scenarios. This allows an optimum scenario to be identified and scaled up (i.e., industrial operation).

Sep 30, 2022

By N. Mendoza, B. Nohtani

Kalegar Project is a copper porphyry system with gold-copper structures. The system is located in southeastern Iran, about 170Km NW of Zahedan city, capital of Sistan and Baluchistan Province. The Project is near the highly deformed and tectonized Lut Block and flysch zone. This type of mineralization is related to regional tensional structures and a pull apart basin. Hydrothermal alteration extends (4.5km x 1km), with an EW tendency. The alteration is predominantly moderate silica-clay with restricted silica pyrophyllite alteration and it is related to ‘B’ banded quartz veinlets. These alterations occur in a dacitic unit, heterolithic breccia sequences and early porphyritic andesite. It may be related to a postulated productive porphyry system at depth.

May 1, 2008

By Denys Parra, Ernesto Nájar, Javier Mendoza

La mayoría de unidades mineras o proyectos mineros en el Perú se localizan a lo largo de la cordillera de los Andes, donde las condiciones del relieve del terreno en algunos casos, hacen difícil la tarea de encontrar áreas con la suficiente capacidad para almacenar relaves convencionales (pulpa o espesados). En otros casos existe la necesidad de recuperar la mayor cantidad de agua, impactar la menor cantidad de área o la escasez de espacios para desarrollar proyectos de instalaciones de almacenamiento de relaves. Bajo estas condiciones la disposición del relave filtrado representa una buena alternativa para el almacenamiento de relaves en varios proyectos mineros.

Sep 1, 2017

By José Héctor Figueroa Paredes

La industria del procesamiento de minerales tiene problemas respecto a la disponibilidad de agua para sus operaciones -en tanto la escasez del recurso hídrico plantea incorporar en los procesos productivos alternativas de procesamiento orientados a optimizar el consumo de agua. En este sentido, Southern Copper Corporation, considera tecnologías de espesamiento de alta densidad a fin de maximizar la recuperación de agua de los relaves de Cuajone, para asegurar los requerimientos de agua para sus proyectos de expansión. Por ello, el presente trabajo señala la factibilidad de recuperar agua de los relaves Cuajone en la Southern Copper Corporation, a través del método de espesamiento de alta densidad que permita el manejo de pulpa densificada, sin la necesidad de formarse una pasta.

Sep 14, 2009

By I. Spaing

El presente texto señala los métodos adecuados que rompen las rocas por medio de herramientas accionadas como parte del avance de galerías subterráneas, donde anteriormente se desintegraba la roca a mano o empleando explosivos. Para ello, es necesario establecer una distinción entre los métodos diferentes, métodos de avance, con el objetivo de identificar las galerías en depósitos subterráneos utilizando medios mecánicos para cortar la roca. Asimismo, ee analizarán las experiencias acumuladas en la minería de Alemania Occidental.

Mar 1, 1981

By Marco Silva

Underground mines are complex environments that require continuous control and monitoring actions in order to have a safe and efficient operation. At Nexa, the goal of achieving "zero harm" promotes the constant search for in its operational processes. Currently, there are manual activities that reduce the agility and precision when working with information from inside the mine, using mostly radio communication and management by sight of badges as an operational standard. This project was born in the context of increasing the operational safety of underground mines, bringing gains to the entire process involving the underground.

Sep 29, 2023

By James R. Kunkel

Water management at a mine site is a critical component for the design of ponds for mine facility operation and mine facility closure. A comparison of pond sizes designed using both a probabilistic and deterministic dynamic water balance model is made. In this sense, the paper point out the probabilistic design of mine-site ponds using a dynamic water management model. The two models both have the capability of using actual operational data and climate inputs to give storage requirements of the ponds Both short-term (60 days) and longterm (many years) designs incorporating a user-selected storm event and a probabilistic or deterministic analysis may be utilized for calculating storage volumes for various mine facilities. Based on these, operational decisions based on actual values or probabilities over time can be made.

Sep 14, 2009

By Floriza Flores

En el presente trabajo exponemos es factible el envío de gases no nocivos para el medio ambiente a partir de la colocación en la chimenea de un reactor de hecho enfocado con el catalizador idóneo, este contribuiría en macro a reducir la huella de carbono en las operaciones en mina subterránea, lo que conllevaría a ser considerados como minería peruana que trabaja amigablemente con el medio ambiente.

Sep 1, 2017

By Alexander Seyfarth

X-ray systems for elemental and phase determination have become more expensive and easier to use. In this sense, although the new systems offer more functions in the software for matrix correction, preconfigured optimized measurement parameters as well as wizards for method development, they will not perform for the applications if not used with the right sample preparation technique. Experience in this sector is not widely shared since it is a more empirical trial and error approach unique to the sample preparation equipment used. This paper outlined 3 case studies, where the sample preparation was crucial in the adaptation of the X-ray technique and it also illustrated that an analytical solution is not complete without the sample preparation, which ultimately governs the accuracy of reference materials and unknowns used. Comparing the necessary sample for XRF with the one used for ICP analysis clearly shows the time and cost savings.

Jul 31, 2003

By Laurie McDonnell

As reserves of high-grade, easily accessible ores decline, it is becoming increasingly important to treat complex feeds and recover multiple target metals, and to identify approaches that will achieve this is a cost-effective manner. Hydrometallurgical treatment of sulphide based material allows for a balance between costs, recovery, and flexibility in final product selection. Glencore Technology’s hydrometallurgical solution to the treatment of sulphide ores is the Albion Process™, comprising two main steps. The first step involves ultra-fine grinding using the IsaMill™, which minimises the potential for passivation of the leaching sulphide and increases surface area for oxidation during the Albion Process™ leach. The second step is the oxidation of the finely ground sulphide concentrate utilising the HyperSparge™ for oxygen injection in Glencore Technology’s Oxidative Leach Reactors (OxiLeach™).

Sep 30, 2022

By Pabel Alvarado

Mineral deposits with large data uses different block dimensions in Long term planning (LTP), short term planning (STP), and ore control (OC). Using applications can Re-block, Krige, Compute variable, Compute Route, etc. necessary block models with multiple dimensions can be created. For instance, disseminated deposits require granular ore control block model because mineralization can be unpredictable. Then different block size must be created for the ore control activity and different block size must be shaped individually in LTP, STP, and OC.

Sep 1, 2017

By Scott Elfen

The degree of saturation in leach facilities and waste dumps can be determined by means of this simple test equipment. A design flow rate is applied to the sample, which is equivalent to irrigation and/or the design storm event. In this sense, the paper point out that the tests were carried out on two different ore sizes from the Pierina Gold mine in Peru. The samples were remolded by using three different densities, simulating different depths within the heap. The ore was subjected to a predefined flow rate, which was equivalent to the design irrigation rate. The flow rate was increased to consider the additional effect of the design storm event during irrigation. In the future, further tests will be performed using different ores samples from operating mines and varying different parameters to help built a database and develop other useful applications from this test, such as general guidelines for maximum irrigation rates for leach facilities.

Jul 31, 2003

By Andreas Dietrich

The development of new techniques in mineral exploration seems to reduce the need of geological field work and mapping: Data collection can now be done remotely by satellites, drones, and tablet-equipped field assistants, while the geologist assembles data sets with 3D software. The interpretation of complex data sets can be assisted by machine learning and artificial intelligence (ML, AI). Instead of loosing relevance, geological mapping and logging are now even more essential to provide the interpretive framework essential for the correlation, validation, and integration of huge amounts of data, but will not be replaced by new technologies. Geological truthing lies in the field, with experienced geologists conducting this work while training and mentoring young professionals.

May 10, 2023

By Eric Nelson

The paper point out the structural openings and the localization of ore bodies. Structural openings in rocks constitute the primary permeability network for the formation of most hydrothermal ore deposits. The distribution, geometry, density, and orientation of ore bodies in structural openings are controlled by two primary factors: the far and near field stresses and the mechanical properties of rock. When stress controls the orientation and kinematics of faults and fractures in the absence of pre-existing weaknesses, ore shoot orientation is perpendicular to the fault slip vector and can be predicted by kinematic analysis. However, when structural openings form along pre-existing weaknesses, ore shoot orientation cannot always be predicted by kinematic analysis. Because we can classify ore bodies based on the types of geological structures discussed above and the variations that naturally occur from material property heterogeneity, exploration for hydrothermal ore deposits should include analysis of geologic structure and evolution, rheological variations, pre-existing weakness, and fault kinematics to evaluate structuralcontrols on localization of ore bodies.

Apr 22, 2003

By Hugo Escóbar Alvarez

Con el objetivo de optimizar el desempeño del Sistema Experto Fuzzy en la operación de molienda de la Concentradora Cuajone ubicada en Moquegua, se ha desarrollado una investigación utilizando diseños experimentales operacionales. Esta técnica se basa en la aplicación inversa del diseño, es decir, a partir de los mejores resultados de tonelaje históricos hacia los rangos óptimos de las demás variables.

Sep 1, 2017

By Kevin B. Heather, Stewart D. Redwood

The AntaKori Project, located in the Hualgayoc mining district, has a NI 43-101 compliant inferred sulphide mineral resource of 295 Mt @ 0.36 g/t Au, 0.48 % Cu and 10 g/t Ag (Wilson, 2012) which is still open in all directions. It is a calcic copper-gold-silver skarn. Mineralization is principally hosted in prograde and retrograde exoskarn in the Cretaceous Chulec and Inca Formations, as well as in quartzites and arkosic sandstones/siltstones of the underlying Farrat Formation. Additional mineralization is hosted by early porphyry intrusions, which are weakly mineralized, as well as locally well-mineralized phases of breccia. The porphyry system responsible for skarn-style mineralization has not been discovered yet.

May 1, 2008

By Augusto Cabrera La Rosa

Jul 20, 1956