Search Documents

By Valcana Stoyanova

Data and information for this study were collected in June-July 2009 onboard the RV Yuzhmorgeologiya in the area covers about 7000 km2 in the eastern part of the CCFZ between 10º05? - 10º55?N and 119º25? ? 121º08?W. In accordance with the IOM research program the cruise was intend to acquire both geological and environmental data and information necessary for delineation of nodule deposits and also data for identification of the baseline of benthic ecosystem. Having implementation of its 15-year plan of work for exploration under the contract with ISA, current activities of IOM were focused on nodule fields within prime areas that could be mined in the future. Bottom photographs obtained by towed deep-sea vehicle NEPTUN along 6 profiles with common length about 300 km (Fig. 1). In total, about 11,500 digital photographs (what cover approximately 40,000 m2 of the ocean floor) were analyzed for assessment of nodule coverage and investigation of megafauna (animals, visible in photographs, the dimension more than 2 cm). The giant single-cell organisms Xenophyophorida were the most multiple animals in seabed photographs. Their number on the site area averaged 1187 ind/ha. However, the vertical camera position does not allow counting all xenophyophorids, therefore their valid number is represented 10 times more. According to all available information these protozoans play the relevant role in assemblage of deep-water environment, giving for other animal groups an [ ] additional source of nutrition and a substratum for settlement and attachment. The ophiuroids are found in assemblage with xenophyophorids in many cases, standing on a sediment at their base.

Jan 1, 2010

By J. C. Wiltshire

Both ferromanganese crusts and nodules present potential processors with enormous volumes of tailings of dubious environmental character: most processing scenarios fail to utilize the uneconomic manganese itself, leaving a total waste volume on the order of 96% of the incoming ore. Each current disposal proposal seems flawed: (1) backhauling to the initial mine site is costly and might run afoul of EPA or UN marine dumping*regulations, (2) subsea disposal near a coastal processing site means almost inevitable community opposition, (3) agricultural soil amendment for improving barren lava or coral rubble appears to require prohibitive amounts of supplementary phosphate, and (4) the slag resulting from an energy intensive pyrometallurgical processing may have potential as road ballast, but few processors will opt for smelting in all but those locales where energy is very cheap. This unfortunately rules out a smelting operation in almost any Pacific Island environment. We envision at least one other scenario which could result in both the removal of tailings from a processing plant and an increase in the supply of useful building materials at little or no cost to either the processing or construction industries--transforming a tenacious waste into a novel resource. Ongoing experiments have demonstrated considerable potential for turning acid leach tailings into dark composite facing stone, fancy black tile, novelty ceramics or concrete aggregate. The tailings are commonly very fine grained and may also serve as an additive in drilling mud. Applications as an additive to asphalt also need to be explored. The metal scavenging nature of ferromanganese minerals should be considered as a radioactive waste disposal matrix. There is no doubt that the greatest challenge will be

Jan 1, 1991

By Bjørn Eske Sørensen, Kristian Drivenes, Przemyslaw Kowalczuk, Kurt Aasly, Gavyn Rollinson, Ben Snook

Efficient and successful mineral processing is dependent on detailed knowledge of the materials and minerals that are to be separated and concentrated. Common bulk methodologies such as XRD and XRF are fast and easy, and can provide an overview of the mineralogy and bulk chemistry of the material. However, they will not provide any textural information. Knowledge of the often intricate interaction between minerals in seafloor massive sulfide deposits is crucial in plant design for mineral processing. Samples from the Loki’s Castle hydrothermal vent have been characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), optical microscopy, Scanning Electron Microscopy (SEM), QEMSCAN, Electron probe microanalyzer (EPMA), and Electron Backscatter Diffraction (EBSD). Processing experiments used froth flotation and leaching techniques. The typical line of operation in ore characterization is shown in Figure 1. Mineral processing may be commenced after any stage of ore characterization. However, it is ideal to have completed as many steps in the ore characterization as possible in order to have the most information of the initial feed material. The main economic minerals in the samples are isocubanite (CuFe2S3), chalcopyrite (CuFeS2), and sphalerite (ZnS), with minor galena (PbS) and trace amounts of Au and Ag. The minerals show complex intergrowth textures down to the nanometer scale. These samples exemplify the need for advanced microtextural analyses to adequately characterize ore material prior to processing. The complex textures hamper the use of flotation as an efficient technique, due to the inability to sufficiently liberate the different minerals and problems with selectively floating isocubanite. Thus, leaching was the preferred method for extracting metals.

Jan 1, 2018

By Cheong-Kee Park

Paleomagnetic properties of sediment cores were examined to reconstruct paleodepositional conditions in the Korea Deep Ocean Study (KODOS) manganese nodule area, located in the northeastern equatorial Pacific. The KODOS sediments studied have a stable remanent magnetization with both normal and reversed polarities, which are well correlated with the geomagnetic polarity timescale for the late Pliocene and Pleistocene. Average sedimentation rates were 1.56 and 0.88 mm/kiloyear for the Pleistocene and late Pliocene, respectively. Clay mineralogy and scanning electron microscope analyses of the sediments indicate that terrestrial material was transported to the deep-sea floor during these times. The variations of sedimentation rates with age may be explained by the onset of the northern hemisphere glaciation and subsequent climatic deterioration during the Pliocene and Pleistocene. For the Pleistocene, an increasing sedimentation rate implies that input of terrestrial materials was high, and also a high input of biogenic materials was detected as a result of increased primary production in the surface water. The down-core variations in paleomagnetic and rock-magnetic properties of the KODOS sediments were affected by dissolution processes in an oxic depositional regime. As shown by magnetic intensity and hysteresis parameters, the high natural remanent magnetization (NRM) stability in the upper, yellowish brown layers indicates that the magnetic carrier was in pseudo-single domain states. In the lower, dark brown sediments, only coarse magnetic grains survived dissolution and the NRM was carried by more abundant, multi-domain grains of low magnetic stability. The down-core variation of magnetic properties suggests that the KODOS sediments were subjected to dissolution processes resulting in a loss of the more stable components of the magnetic fraction with increasing core depth.

Jan 1, 2004

By J. Robert Woolsey

A unique concept for a self-cleaning filter system has been designed and constructed which utilizes acoustic energy, coupled hydraulically with a subject liquid media, and a fine mesh screen to perform the following: 1. separation of solid suspended particles from a host liquid through the breakdown of surface tension; 2. enhanced filtration of liquid fraction from the solids fraction to specified limits, retaining a specified size range of solids, and; 3. continuous cleaning of screen, preventing screen blinding and promoting a continuous filtration process. The concept is the product of a cooperative program between the Marine Minerals Technology Center, Continental Shelf Division, and the Moscow State Mining University. The physical principals involved in the separation, filtration, and screen cleaning processes primarily relate to the characteristics and properties of the applied acoustic energy and the influence of this energy on the solids/liquid mixture. The acoustic energy introduced to, and acting on and throughout, the whole volume of the solids/liquid mixture, within the vessel body at any given time induces hydraulic pressure waves, which may be further described in simplest form as positive and negative semiperiods (which may or may not be equal in amplitude or period) of the basic wave forms. The processes involved may be considered in two phases. The first phase relates to the process of separation in which the acoustically induced force of acceleration manifests as vibro-agitation (thresh- old of cavitation) and possibly cavitation is the primary factor in the breakdown of surface tension between the solid particles and suspending liquid; i.e. water. In the case of compressible organic solids, the separation of liquid by squeezing may also be a factor.

Jan 1, 1994

By Mike Woodborne

The marine diamond industry off south-western Africa is maturing rapidly. Some of the larger explorers have reached an advanced stage in their resource development and new mining operations have been started in the last year. Most of the major exploration, mining and marine engineering companies have offices in Cape Town. As a result of the increased activity and experiences to date, new approaches to marine diamond exploration and mining are now evolving. Primary factors contributing the new approaches are namely 1) the concentration of expertise in a localised area 2) the significant increase in the base of available exploration and production results and 3) parallel advances in the marine engineering design and geophysical survey equipment. The sea floor geology and setting of the marine diamond exploration areas is now better understood. Consequently the strategy for exploration and the selection of appropriate survey equipment is improved. Due to new equipment developments, different exploration alternatives now exist, depending on the programme objectives. Significant advances have also been made in the data processing and modelling undertaken to assist in the identification and targeting of potentially diamondiferous prospecting features. Similarly, the design of appropriate prospecting tools and programmes has also been improved. Following exposure to the requirements of the marine diamond industry, the design engineering and operating companies have responded with innovative designs for new prospecting tools. In recent years the availability of relevant information on marine diamond prospecting and production has increased. As a result, there is now sufficient basis for the construction of meaningful financial valuation models that can be effectively used to control and guide the exploration projects, to the benefit of both the explorer and the investor.

Jan 1, 1998

By Tetsuo Yamazaki

Natural methane hydrate has been scientifically studied as a carbon reservoir globally. However, in Japan, the potential for energy resource has been industrially highlighted. There is less domestic oil and natural gas resources in Japan, but many potential deposition areas for methane hydrate in ocean around Japan are the reasons. Less CO2 discharge from methane compared with coal, oil and conventional natural gas when the same calorie value we get is considered as the advantage for energy resource. However, because methane hydrate distributes in shallower sediment layer in ocean floor, accidental leakage of methane may occur while we utilize methane hydrate. Methane itself has 21-times impact on the greenhouse effect, if it reaches the atmosphere. Therefore, it is necessary to estimate the behavior in the environment after the leakage, if we want to use methane hydrate as energy resource. The mass balance after leakage of methane on seafloor and in water column is numerically studied through the analyses of methane emissions from natural cold seepages and hydrothermal activities in this research. The outline structure of mass balance ecosystem model shown in Fig. 1 is introduced. A numerical early diagenetic model CANDI (Carbon And Nutrient Diagenesis) developed by Boudreau (1996) for simulating the biogeochemical processes such as organic matter, oxidant, nutrient, bi-product, and pH diagenesis in aquatic surface sediments and C. CANDI improved by Luff and Wallmann (2003) for describing the formation process of calcium carbonates in CANDI are used as bases of the ecosystem modeling in surface sediment layer around seafloor methane emission. Two functions such as methane bubble dissolution and bacterial methane oxidation in water column are added to an existing physical plume dispersion model by Doi et al. (1999).

Jan 1, 2005

By Robert M. Owen

The rare earth elements (REE1s; atomic number 57 -71) exhibit a coherent chemistry, are widespread in nature, and tend to occur in characteristic concentrations in different geochemical phases. Because of their predictable chemistry, the REE's-are highly useful as indicators or tracers of geochemical processes, and are often used as such in investigations of the genesis of terrestrial ore deposits. However, analogous applications of the REE's to the study of marine mineral deposits have been constrained by our limited understanding of the marine geochemical cycle of these elements. For example, a continuing area of uncertainty in this regard involves the so-called "REE Mass Balance Problem." This problem refers to the fact that detailed geochemical mass balance calculations typically predict a significant imbalance for the REE's; i.e., the calculations predict that REE removal rates from seawater are 11-18 times greater than their input rates. Yet all other chemical considerations indicate that the REE budget should be roughly in balance. Recent studies at The University of Michigan suggest the solution to this problem lies in understanding the the role of seafloor hydrothermal activity in the marine budget of the REE's. Geochemical analyses of hydrothermal sediments from two Pacific sites (East pacific Rise at 19°s and the Southern Juan de Fuca Ridge at 45°N) clearly show that the REE component of hydrothermal sediments is primarily acquired via scavenging from seawater. Iron oxyhydroxides, which form as precipitates when hydrothermal solutions are debouched onto the seafloor, are the active scavenging agent. Although the REE content of hydrothermal sediments generally increases with increasing distance from the rise crest, this increase is especially pronounced for sediments deposited below the lysocline,

Jan 1, 1989

By Harold Gibson, Ulrich Schwarz-Schampera, Ralf Freitag, Hendrik Mueller

INTRODUCTION Germany has a long history in marine research in the Indian Ocean. The first German scientific cruise started in 1964, followed by a series of state-sponsored research cruises between 1983 and 1995 leading to the first finding of polymetallic sulfides in the Indian Ocean. The research included regional bathymetric, geological, structural, volcanological, petrological and hydrothermal investigations along the Carlsberg Ridge and the Central Indian Ridge (CIR). Early environmental base line studies covered oceanographic and sedimentology aspects. In 2010, BGR took the initiative for the preparation of a license application for the exploration of polymetallic sulfides with the International Seabed Authority (ISA), and prospecting started in 2011 along the southern Central (CIR) and the northern Southeast Indian Ridge (SEIR) in the southwestern Indian Ocean (cruises INDEX 2011 on board R/V Sonne), INDEX 2012 (R/V Fugro Gauss), INDEX 2013/1-2 (R/V Sonne) and INDEX 2014 (R/V Pelagia). After three years of resource-oriented and environmental base line studies, BGR, in order for the Federal Ministry for Economic Affairs and Energy (BMWi), applied for an exploration license which was approved by and subsequently signed with the ISA in 2015. The license gave permission to start a detailed exclusive resource-oriented exploration program in the license area. The program includes the outline of potential ore deposits and a resource assessment but also extensive and detailed base line studies for the sustainable protection of the marine environment in the license area. The license contract has a fifteen years lifetime and may allow the application for a subsequent mining license. The exploration aims at the identification of inactive polymetallic sulfide deposits, formed below former discharge zones of hot hydrothermal fluids on the ocean floor (“black smoker” systems), by advanced and modern exploration techniques.

Jan 1, 2018

By Akira Usui

Platinum is one of the most rare elements in the earth?s crust, but it is significantly enriched in some hydrogenetic ferromanganese crusts in the ocean. The element is essential to the electric industry and is believed to be of importance as a raw material a future fuel-cell industry. The earlier reliable chemical analysis of platinum-group elements (PGE) of ferromanganese crusts have indicated a variety of concentrations of Pt in the range of 100 ppb to a maximum of about 1 ppm, but little is known about the elemental abundance in ferromanganese crusts on fine-scale, or the geochemical behavior and form of the element. The chemical and mineralogical forms of platinum and its group are important in planning the methods of mineral exploration and extraction of the elements from of ferromanganese crusts. We attempted to characterize the distribution pattern within a cobalt-rich crust on the fine to microscopic scales by using reflecting microscope, scanning electron microscope/energy-dispersive spectroscopy, electron microprobe X-ray analysis (EPMA), ICP-mass spectroscopy, X-ray absorption near edge structure (XANES), small-focus XRF, and X-ray diffraction (XRD). These data indicated a wide range of Pt concentration from 150 to 700 ppb within a crust, though we found no distinct inter-element correlation or mineralogical control. Under the reflecting and electron microscope, no distinct Pt-bearing minerals or particles were identified. Small-focus XRF indicated no uneven distribution in any particulate matter, but all areas are less in abundance than the detection limit of about 10 ppm. Our tentative conclusion is that zero valence Pt0 (as suggested by XANES) is dispersed in the form of submicroscopic material most probably within ferromanganese minerals, and therefore, Pt-rich mineral particles may not be a major carrying phase.

Jan 1, 2005

Ancient volcanogenic Cu-Zn-Pb-Ag-Au massive sulfide ores commonly have associated with them along strike and in the immediate hanging wall a distinctive sediment that is thin, usually cherty and metal enriched, and generally referred to as an "exhalite horizon" or "tuffaceous exhalite". Typical examplks include the 13 Ma tetsusekiei of the Kuroko deposits of Japan (Kalogeropoulos and Scott, 1983, Econ. Geol.) and the 2700 Ma contact tuffs of Noranda, Canada (Kalogeropoulos and Scott, 1989, Can. J. Earth Sci.) and Key Tuffite of Mattagami, Canada (Liaghat and McLean, 1992, Explor. Min. Geol.). Attempts to use trace element distributions as lithogeochemical guides to ore have been largely unsuccessful. Exhalites have been considered to be the products of seafloor hydrothermal activity that is peripheral to the main ore-producing vents. However, large actively-forming polyrnetallic sulfide deposits at the Explorer mid-ocean basalt spreading ridge (1 850 m depth) in the NE Pacific and the eastern Manus back-arc dacitic spreading center (1650 m depth) in the western Pacific have demonstrated that the exhalite horizons are more likely produced by fallout of particulates from the main hydrothermal plume. In a typical hydrothermal plume, grains of >27 µm represent up to 97% of the mass (although only 2% of the population) of the particulates and are calculated by Stokes equations to fall from the plume to the seafloor within a few krn of their source. The particles are primarily composed of anhydrite, barite, amorphous silica, iron oxyhydroxides and metal sulfides and oxides. Plumes are subject to bottom currents which push them in preferred directions, just like smoke plumes in the atmosphere are subject to the vagaries of wind direction. Bottom currents in the deep ocean can be 50 m/min or

Jan 1, 1993

By Lu Jun

Up to now, much data on marine minerals, as well as on marine geochemistry, have been accumulated. Modem computer databases provide optimum flexibility and power for manipulating these data. The best worldwide marine mineral database is currently the Marine Minerals Bibliography and Geochemical Data Base created by Carla Moore et al. at the National Geophysical Data Center in the United States. In fact, in the course of studying marine minerals and geochemistry we may collect not only digital-character type data but also graph and image (black-white, grey and color image) data types. For instance, correlation diagram between chemical compositions of minerals, spectroscopic graphs, (e.g. infrared spectra, Mossbauer spectra, etc.), grey or color images from both optical and electron micro- scopes (scanning or transmission electron microscopes) as well as seabed photographs. Charles L. Morgan et al. (1993) reported that 10,000 photographs and some video images of the seabed in the Clarion-Clipperton region of the northeastern tropical Pacific have been collected by the Ocean Minerals Company. If both graphic and analytical information were stored in a database, it would be very useful and convenient to marine geologists. This system would not only be able to search for all the data based on one parameter, but also for both size and composition distributions. If possible, geostatistical methods could be combined with fractal dimensional methods. Of course, this would require enormous efforts. Before multimedia technology emerged, it was very difficult to create image databases. The emergence of large-capacity compact discs, high-speed central processing units, and high-speed digital signal processing techniques makes it possible to establish multimedia database management systems (DBMS), image-text DBMS, that involves graphs, text, images, and sound. In order to store image fields in a DBMS, we have to take into account two problems: (1) image access format and (2) image compression code standard.

Jan 1, 1994

By Kira Mizell, James R. Hein

Ferromanganese (FeMn) crusts form by precipitation of iron and manganese oxides from seawater onto a rock substrate and are therefore considered hydrogenetic in origin. Diagenesis does occur however, through the process of phosphatization. During phosphatization, abundant dissolved phosphate in seawater replaces carbonate in the detrital fraction as well as directly precipitates within the FeMn matrix as carbonate fluorapatite (CFA). This process is likely accompanied by the partial dissolution or replacement of the oxide phases [1]. As a result of these diagenetic processes, trace elements adsorbed on the oxides are released and can either be depleted or enriched in the phosphatized FeMn crust layers. Pb, for example, has been shown in sequential leaching experiments to associate with the iron oxyhydroxide (FeOOH) phase in purely hydrogenetic layers, while >95% of Pb in phosphatized crust layers is found in the CFA fraction [2, 3]. However, previous sequential leaching studies analyzed bulk layers of phosphatized crusts and only a few crusts, from the Pacific Ocean. Here we present concentration data for Pb and other trace elements in the CFA fraction leached from thin stratigraphic intervals of the phosphatized portion of FeMn crusts from the Pacific and Atlantic oceans to confirm consistency of trace metal association with CFA both throughout the phosphatized section and in two ocean basins. The Pb and trace element concentration data from this study will also be compared with data from non-phosphatized crusts from the global ocean. We can then determine the effect of phosphatization on the concentration of Pb and other elements of greater economic interest in FeMn crusts, specifically whether there is overall enrichment, depletion, or possibly even phase transfer of each metal in the phosphatized layers.

Jan 1, 2018

By Akira Usui

Occurrence of hydrogenetic ferromanganese crusts has been well documented over inactive seamounts in the central and southern Pacific Ocean. It has been thus believed that the hydrogenetic crusts develop preferentially at water depths between about 800 to 2500 meters. In fact, according to the Manganese Crust Database (F. Manheim, 1988), only two occurrences are known at water depths below 5000 m out of 819 occurrences cited in the database. Unexpectedly, we found typical hydrogenetic ferromanganese crusts from deep-sea floors; 1) outcropping old volcanic basement over the Philippine Sea Plate (abandoned spreading centers and subducting old oceanic crusts) and 2) one from the slope of an abyssal hill in the Central Pacific Basin (Cretaceous deep-sea basin) at water depths ranging between 5200 to 6100 meters. We report their occurrences with submersible observations from Shinkai 6K, physical parameters (such as thickness of crusts about 2-4 cm in maximum), chemical composition, petrology of substrate, and results of Be-10 dating for some samples in comparison with typical Co-rich manganese crusts from the Central Pacific seamounts. The preliminary chemical and mineralogical analyses reveal that they are of typical hydrogenetic origin, and typical of iron-manganese oxide mineral, vernadite, slow and probably continuous growth, and lower content of Co than the Central Pacific seamount crusts. The occurrences and nature of the crusts indicate that deep-sea floors are also optimal for the growth of hydrogenetic crust even at 5000 m water depth or deeper, only if oxygenated deep waters are supplied and the sea-floor morphology keeps stable enough for significant geological time period. Additional details of chemical analyses will be prepared by November and to be shown in the conference.

Jan 1, 2001

By Gerald R. Dickens

Massive sulfide ores and Fe-Mn oxyhydroxide precipitates represent two extremes of a spatial continuum of hydrothermal deposition along oceanic ridges. Elemental variations across this continuum are of interest to economic geologists as a prospective geochemical exploration tool. Theoretical considerations suggest that certain physical and chemical parameters can be used to model compositional variations within the far-field (i.e., Fe-Mn oxyhydroxide) component as a function of distance from ridge axis; however, testing and verification of such models generally has been precluded because the few available distal hydrothermal sediment sequences have been sampled at low resolution and/or are highly diluted with biogenic components (e.g., siliceous and calcareous tests). Recent ocean drilling (ODP Leg 145; Sites 885/886) in the North Pacific successfully recovered an extensive record of "biogenic-free" distal hydrothermal precipitates from an area approximately 60 km south of the Chinook Trough at longitude 168.1 °W. Geophysical and geomorphological evidence suggests the Chinook Trough is the southern lithospheric scar marking initiation of late Cretaceous north-south rifting, implying that recovered hydrothermal materials record distal hydrothermal precipitation from the now-subducted Kula-Pacific spreading ridge. The Chinook Trough hydrothermal sequence is a continuous 15 my record of "biogenic-free" hydrothermal Fe-Mn oxyhydroxide precipitation mixed with eolian clays. It was deposited during the late Cretaceous, early Paleocene (80-65 Ma) as the perpendicular distance from ridge axis increased from 75 to 600 km. A high-resolution geochemical analysis of this hydrothermal sequence reveals distinct trends for the up-core (equivalent to increasing distance from ridge) distribution patterns of Fe, Sc, As, and rare earth elements (REE). Iron concentrations exhibit an S-shape distribution pattern with respect to increasing

Jan 1, 1994

Although Mn, Fe, Cu, Ni, and Co have been the main interests since the ferromanganese nodules had been found, the other major components such as Si and Ca might be very important controlling factors in the processing due to the locally variable content. It is because of the fact that SiO2 and CaO are added to decrease the smelting temperature in the reduction-smelting method for manganese nodule processing. We have compiled the 707 chemical data for KODOS (Korea Deep Ocean Survey) ferromanganese nodules, which have been acquired from 1994 to 2001 and have been also standardized from 2001 to 2003 to avoid the discrepancy between the data sets. All 707 chemical data were used for the hierarchical cluster analysis to get the elemental correlations and also classified by the morphological types. The averages from each station were classified by the facies groups (Fig. 1) and the localities. Then all data are plotted on the SiO2-CaO-MnO phase diagram at 1773°K to compare with the best compositional area in the nodule smelting. Variations and distributions of SiO2 and CaO as well as those of Mn, Fe, Cu, Ni and Co in KODOS ferromanganese nodules were also reviewed. The mineral phases assigned by the cluster analysis are CFA (Carbonate Fluorapatite), Fe-oxide, Al-silicate, and Mn-oxide. MnO contents are generally higher than SiO2 contents in most of the morphological types except for the Is- and It-type. The Dt- and Tt-type show wider range and the E-types show high anomaly in their CaO contents. The stations which belong to facies group A and B show generally higher MnO contents than SiO2 contents, however, the stations of facies group C and D show wide range in their MnO and SiO2 contents.

Jan 1, 2004

By Mikhail P. Torokhov

Typical coastal placers leave no doubt that placer accumulation can result in significant concentration of heavy minerals in marine shallow water environment. However, the same situation is quite predictable for guyot?s slopes at stages of submarine volcano formation and later submersion of guyots to a depth of up to 3-4 km. Where these placers could be found is also clear ? in coastal facies (as typical coastal placers), and in morphological traps down guyot slopes in zones of active submarine currents. The latter could be cracks in rocks, shallow depressions, spurs, and structures, such as coral reefs, stromatholiths, and even ferromanganese crusts. The last of these have been studied carefully by the author in the Magellan Seamounts and on the Mid-Pacific Rise: tens of minerals, including mineral forms of PGE, REE, Mo, W, Te, Cr, Co, Ni, Cu, &Zn were identified as a xenogenic (trash) minerals. The detailed study of polished epoxydized sections, showed that interstitial spaces of Fe-Mn botryoids are enriched in heavy minerals (predominantly titanomagnetite). Taking into account the irregular character of crust surfaces and their position in active water environment, we can definitely state that they are the ideal traps for placer minerals. Study of guyot basaltic matter showed the presence of similar REE, PGE minerals that are in the crusts, and the same (mostly) micron sizes of minerals. High content of PGE in some basaltic varieties (up to 1 ppm) suggests that this is a reasonable source of these elements in the crusts, rather than the water column (which is normally considered to be the case by most marine scientists). Predominance of Pt in hydrogenous (?) crusts is interpreted as due to the better stability of Pt mineral forms during weathering and transportation (these are isoferroplatinum, and silicides). Comparison of 143Nd/144Nd values in bulk crusts, heavy fraction of crusts, basalts, and water column supports the author?s idea, that a significant part of REE also comes from basaltic matter (in form of monazite, CeO2 etc.).

Jan 1, 2004

By D. S. Limpenny

Marine benthic habitats are vulnerable to the influence of a wide range of anthropogenic activities (e.g. sand and gravel extraction, dredged material disposal and trawling). Traditionally, benthic ecologists have relied on point sampling techniques such as grabs, corers and dredges to provide information on the physical nature of the substrates and their associated benthic fauna. However, information of this nature only relates to the specific point on the seabed from which the sample was collected and the interpolation of such data to predict the wider distribution of substrata and associated fauna may be unreliable. Our approach uses a range of acoustic, photographic and physical sampling methodologies to produce continuous acoustic coverage maps which can be used to assist with the interpretation of faunal distributions. This approach has been used to assess the impacts of marine sand and gravel extraction at the seabed at two sites off the east coast of England in the southern North Sea. The first study site (designated ?Area 222?) is located 20km off the southeast coast of England and was surveyed in 2001 using sidescan sonar, single beam bathymetry, seabed photography and also a 0.1m2 Hamon grab for the collection of benthos and sediment samples. The main objectives of this investigation were to provide an indication of the spatial distribution of the sediments and macrofauna in the wider area encompassing the dredged site, to evaluate the scope for the effects of marine sand and gravel extraction to extend beyond the boundaries of the site and to provide a wider geographical context for time series investigations. At this site, an acoustic basemap was utilised in conjunction with faunal sampling and photographic groundtruthing, to determine the nature and distribution of the seabed sediments and their associated features. Disturbances at the seabed arising from historic sand and gravel extraction activities were mapped, and this information was helpful in establishing biological cause and effect relationships. The acoustic basemap was also used to target biological reference sites against which the effects of adjacent man-made disturbances could be evaluated.

Jan 1, 2004

By Alexander Malahoff

Field observations and sampling of land-based and submarine hydrothermal and geothermal sites show a definite link between the geological setting, fluid geochemistry and specialized assemblages of microorganisms found at these settings. Three initial sites have been chosen as a basis for these studies. The first site is located on hydrothermal vents in pit craters on the submarine volcano Lo?ihi (Hawai?i) at a water depth of 1,300 meters. The second site is within the geothermally active vents, ponds and lakes of the Taupo Volcanic Zone of New Zealand. The third site extends along the chain of volcanically and hydrothermally active volcanoes of the Kermadec-Tonga arc and back-arc system. To focus our work in New Zealand, a geomicrobiology field and experimental center has been established in Wairakei, New Zealand, with the relevant genomics, proteomic and bioinformatics work being conducted at the University of Hawaii. As part of a partnership between the University of Hawai?i, the Institute of Geological & Nuclear Sciences (GNS) and Victoria University of Wellington, a new interdisciplinary graduate course in geomicrobiology will be taught at Victoria University beginning next year. Since mineral-microbial interactions have been occurring for the past few billion years and these interactions have led to where one generates the other, a metal-bacteria research program has been initiated at GNS using arsenic-gold and other metal-bacterial interaction processes as a research objective. In this research program, we have completed the full genome of a new species of marine bacterium Idiomarina loihiensis from the Lo?ihi hydrothermal vents and identified specialized microorganisms living in pH 0.3 geothermal vent waters of White Island, New Zealand. The multidisciplinary approach to study the process of accumulation of metals in the hydrothermal systems clearly shows the path of how bacterial-mineral interaction can precipitate metal deposits. These studies will lead to new avenues for biomining, bioremediation and the understanding of the origins of life.

Jan 1, 2004

By Dennis Sánchez Mora, John Jamieson

INTRODUCTION Work by Humphris et al., (2002); Ondréas et al., (2009); Barreyre et al., (2012); and Escartín et al., (2015) has identified active and inactive hydrothermal sites along the Lucky Strike segment. The sites that contain the largest accumulation of known sulfides are located between the north and the southern zones (Figure 1), a vent site area that is referred to as the Main Lucky Strike hydrothermal field (Escartín et al., 2015). Hydrothermal fluid outflow has been linked to a shallow fault network (Barreyre et al., 2012). However, specific constraints on fault geometries have not been determined. Other off-axis sites at Lucky Strike, such as Capelinhos (high temperature vent), and Grunnus (inactive?), as well as a low temperature vent field (on-axis), Ewan, have been described by (Escartín et al., 2015). Given the spatial relationship between the Main Lucky Strike hydrothermal field (MLSHF), and the intersection of northern rift faults with the southern rift faults, a structural analysis of this area can provide insight into the fault controls on fluid flow that leads to hydrothermal venting and sulfide precipitation. METHODOLOGY Structural data (dip direction and dip) was determined using Leapfrog Geo 4.0 software. Bathymetric data was obtained from Escartín et al., (2015) and references therein. The bathymetry was imported into Leapfrog Geo (in UTM format) and, using the structural modelling tool, individual measurements with dip direction and dip data were collected with a focus on the northern volcanic rift and the southern central volcano (Figure 2a). All measurements were taken from what the authors consider as normal faults, and to aid the determination of individual measurements a “face dip” map was constructed, where the bathymetry is colored by slope angle (Figure 2b). All measurements are simultaneously plotted on a stereonet generated by the Leapfrog Geo Software. Data were divided into northern and southern, and western and eastern zones to determine the relationship between hydrothermal venting and the structural geometries at Lucky Strike (Figure 2c). Slip measurements for individual faults were determined along the dip of the fault with a measuring tool. Net slip, heave (horizontal displacement), and throw (vertical displacement) was calculated for each of the zones.

Jan 1, 2018