Search Documents

By Jorge Vargas Fernández

El presente texto describe los distintos tipos de yacimientos mineros en el Perú, los métodos de explotación, productividad y mecanización, las empresas mineras, su importancia económica, esquema de financiación y los proyectos mineros.

Jul 1, 1977

By Ingvar Bergqvist

El presente texto describe el uso de los explosivos desde el siglo XVII hasta la actualidad, así como los factores a considerar dentro de la minería. Entre estos tenemos la velocidad de detonación, potencia, seguridad en el manejo, estabilidad de detonación, calidades de manejo, densidad, resistencia al agua, congelación y los aspectos médicos. Asimismo, los tipos de explosivos se dividen en los basados en nitroglicerina y los libres de ello, ANFO y slurry.

Jul 1, 1977

By George Haag

El shotcrete tiene una función importante en el sostenimiento y protección de una excavación subterránea. En ese sentido, el presente texto señala los tipos de shotcrete (mezcla seca y mojada) ventajas, clases de equipo, provisión de aire, agua, mangueras, inyectores, la clase de aditivos, los tipos de segregados, los análisis de costos, seguridad, tiempo y otros factores.

Jul 1, 1977

By J. Ventura

El presente texto señala algunos aspectos en el diseño de proyectos de explotación de minas metálicas a cielo abierto respecto a los subterránes. Para ello, es necesario evaluar la importancia de la tasa de recuperación del metal, la cual es producto de las tasas elementales de recuperación en la explotación y la planta. Asimismo, los métodos de extracción selectiva tieneN mayor influencia sobre la tasa de recuperación global que los resultados de la planta de concentración por los cuales se suele tradicionalmente desarrollar esfuerzos considerables para lograr tan sólo como uno o dos puntos más de rendirniento. También la extracción selectiva tiene mayor influencia sobre los resultados financieros.

Jul 1, 1977

By Hugo Medina

El texto describe la importancia de la prospección, exploración y explotación de los minerales del manganeso en el norte del país. El manganeso se utiliza en la fabricación de acero por sus efectos desoxidantes de sulfurantes que impide la formación de sopladuras en la masa del acero y da el tenor necesario de manganeso forjándolo más duro, maleable y dúctil. Su utilización como ferromanganeso es porque así es más controlable la acción del manganeso en los procesos de fabricación del acero.

May 1, 1977

By Ingvar Bergqvist

Para activar la carga de explosivos de una manera controlada, se requiere una clase de dispositivos de detonación. En ese sentido, el texto señala la aplicación de estos dispositivos con las medidas de seguridad necesarias para ser aceptados dentro de la actividad minera. Los dispositivos se dividen: sistemas eléctricos y no eléctricos. Entre los criterios de seguridad tenemos: confiabilidad, menor riesgo de detonación prematura, conexión simple y racional, calidad pareja y la adaptación a explosivos disponibles, máquinas de voladura, como de los requisitos del mercado con referencia al tipo de trabajos, profundidades de taladro, etc.

May 1, 1977

By Renán Jauregui

El problema de separación de minerales de cobre con los de plomo ha generado particularidades debido especialmente a las diversas variedades de los minerales de cobre, cuya composición química, distribución especial de sus átomos, solubilidad, tipo de cristalización, diseminación, dureza, densidad, etc. varía de un mineral a otro. En ese sentido, el presente texto señala los métodos adecuados para los sulfuros de plomo y cobre tales como el de SO2 ácido sulfuroso y almidón hervido, método combinado del anhídrido sulfuruso, método del cianuro de zinc amoniacal y el método de cianuro de zinc.

Mar 1, 1977

By Russel Santillana

El presente texto revisa el proceso de concesión y el concepto de distrito minero como una zona geográfica que reúne las condiciones de formación tectónica para considerarse una zona metalogenética. En este sentido, el Estado es quien debe reformar el sistema de concesiones mineras para poder así conocer y disponer de sus recursos minerales en el menor tiempo posible. De otro lado, las concesiones de exploración son siempre mayores que las de explotación -en tanto se conocen los límites determinados por la Ley General de Minería. Asimismo, el nuevo sistema de concesiones deberá involucrar al desarrolllo de programas de exploraciones para que estos conduzcan a una explotación racional de las concesiones mineras del país.

Mar 1, 1977

By Eugene J. Schreiber, F. Newton Parks

Booz-Allen & Hamilton management consultants has recently completed a comprehensive study of Brazil's minerals and metals sectors for 40 leading international and Brazilian companies. The 220-page study describes the activities and Investments under way in 25 key commodities and assesses the current state of Brazil's economy, the impact on domestic minerals and metals industries, and government minerals policies.

Jan 12, 1977

By Robert C. Bates

Is the value of rock sealant on radon control destroyed by changes in barometric pressure? While an article by Dr. Gerald Schroeder in the June 1977 issue of MINING ENGINEERING suggests this, it should be noted this is not necessarily true as the ensuing discussion reveals. Before analyzing the data leading to Dr. Schroeder's conclusions, some comments on their source are needed. The figures were collected during a 1973 US Bureau of Mines test of radon barrier coatings in the Dakota uranium mine near Grants, N.M. Results of that test were reported by Franklin, et al 3,4 in 1975. The mine is essentially dry and ore occurrence is within a lightly cemented, porous medium-to coarse-grained sandstone of high permeability and radon emanation rate.

Jan 12, 1977

What has been billed as the underground drilling technology of the 1980's got a dramatic head start when Boliden engineers at Stekenjokk decided to go with all hydraulic drilling for primary ore production and mine development. This application represents a major first in meeting the needs of high productivity, better energy utilization, and an improved drilling environment. At Stekenjokk, engineers chose three Atlas Copco Boomer H132 two-boom electro-hydraulic drill rigs with the COP 1038 rock drills. An additional single-boom Boomer H131 was also selected with the COP 1038 HD for roof bolting functions.

Jan 12, 1977

By Milton E. Wadsworth

Hydrometallurgical processing of ore deposits by solution mining or in situ techniques requires the interfacing of technologies as diverse as hydrology, geology, chemistry, and rubblization. This synthesis represents one of the main challenges to in situ processing due to the inherent complexity and vocabulary of these well-developed technologies, and to the general lack of appreciation for the depth of knowledge and endeavor in each separate field. No better example of the need for such interfacing of technologies exists than that of solution mining. How well these technologies interface depends upon the size of the operation and its financial capability to use the information and technology available. It is inconceivable that any one individual can optimize each potential contribution alone; consequently, some areas are usually neglected or simply are not fully appreciated. When one examines what must be done at a future date to develop and exploit a remote solution mining system, it becomes obvious that each discipline must effectively communicate the needed background information to make the project a synthesized whole.

Jan 12, 1977

By Joan Melcher

The oil embargo and increasing disillusionment with nu- clear power have put this country's abundant coal reserves in growing demand. Both the government and industry are looking toward increased coal mining, and with this goes an increased interest in new and advanced methods of coal utilization. One advanced coal system stands out among the rest-magnetohydrodynamics (MHD). Its high efficiency, strong probability of sulfur dioxide control, and limited consumption of cooling water place MHD in a unique position to help the power generation industry. Another point in MHD's favor is the capital costs of operation, which are lower than those of other advanced technologies. However, initial costs are higher and realization of a commercial MHD plant in this country may be more than a decade away.

Jan 12, 1977

By Ta M. Li

How do you convert a copper-zinc resource into a viable economic mining operation? This problem, unlike most, was complicated by the additional presence of a sub-arctic climate, highest labor costs in the world, low-grade copper-zinc values, depressed market prices, and a complex mineralization.

Jan 12, 1977

The current status of the US lead and zinc industries was reviewed by J. G. McCullough, president of Amax Lead and Zinc Inc. He reported that in the US, lead and zinc are separate industries because of the nature of mineralization. The large Mississippi-type zinc deposits are practically lead-free, and while the new lead belt in Missouri has some zinc content, it does not have the same favorable economic impact as in the complex massive sulfide ore bodies being developed elsewhere.

Jan 11, 1977

Most lead-zinc mines worldwide have moved to further mechanized techniques to boost productivity, improve safety, and lower costs. The mining session, chaired by S. C. Fall, NL. Industries, and C. J. Beattie, Callahan Mining Co., reviewed mining methods at five operations in the US, Australia, Peru, and Japan. Where massive sulfide-type and irregular ore bodies are encountered, resourceful operators have modified and varied the mining method with the localized ore zones. In all cases, mechanization of operations has registered gains in productivity.

Jan 11, 1977

Constraints in the location, process selection, and operation of the modern zinc refinery brought about by the heightened environmental awareness of the public were explained by Sanjoy Shome, project engineer for Kaiser Engineers Inc.

Jan 11, 1977

Efficient energy utilization in the electrolytic zinc process, relative to other zinc processes, is one of the reasons for its wide adoption in recent years, says John D. Siddle, zinc plant superintendent at the Bunker Hill Co., Kellogg, Idaho. Designers and operators of electrolytic zinc plants have pioneered process improvements, new equipment, and operating techniques to conserve energy. As energy costs increase it the future and competitive pressure mounts against less-efficient producers, these energy-saving improvements will he regarded as necessary for economic survival. Plant designers and operators should not lose sight of the savings in operating costs possible through intelligent utilization of all available forms of energy.

Jan 11, 1977

By Jack G. Gill, Richard A. Dick

Blasting safety is a subject that cannot be overemphasized. Two years ago, a study was published describing g a series of fatal blasting accidents which took the lives of ten metal and nonmetal miners during the period of May 1973 to August 1974.1 Each accident was described, and the direct causes were delineated. In each instance, specific MESA safety regulations were violated. Four of the victims were killed by drilling into explosives; two were killed by lingering too long in the vicinity of fuse rounds; two fatalities resulted from improper guarding of shots; one blaster did not retreat far enough to avoid the blast concussion; and another used an improper tester for checking an electric blasting cap. All of these fatalities could have been avoided by adhering to the MESA blasting regulations contained in 30 CFR Part 55 (Health and Safety Standards-Metal and Nonmetallic Open-Pit Mines), Part 56 (Health and Safety Standards-Sand, Gravel and Crushed Stone Operations), and Part 57 (Health and Safety Standards-Metal and Nonmetallic Underground Mines).

Jan 11, 1977

The Lead-Line Update held in conjunction with the 1977 SME-AIME Fall Meeting in St. Louis provided sessions on mining, mineral processing, extractive metallurgy, and economies to brief the record on the industry's activities and developments since the 1970 World Symposium on Lead and Line convened, also in St. Louis. Changes in the industry since 1970 have not been profound, notes the program committee, consisting of D. O. Rausch, F. M. Stephens, and B.C. Mariacher, cochairmen; and H. L. Clifford, S. C. Fall), and M. Snedeker. However, various environmental and conservation factors have had a direct impact on process consideration and operating practice; the result has been new mines, improved technology, and changing market opportunities. The general consensus of the participants is that the future for the Lead-zinc industry looks promising as new applications are found and new products resulting from intensive research reach the marketplace. The highlights of the HS technical papers presented at the 1977 session follows.

Jan 11, 1977