Search Documents

By Patrick J. C. Ryall

Remotely control led drills capable of being lowered to the sea-floor from ordinary research vessels have been developed over the past two decades. These drills are currently being used in geological survey programmes on the continental shelves (Canada, Japan, Norway, United Kingdom) and for studies of mid-ocean ridges. Generally the drills fall into two categories: 1) those which are powered from the surface and controlled by an operator, and 2) those which are battery powered and follow an automatic programme. Some drills have a television camera mounted on them sending a picture to the surface as an aid to site selection and geological interpretation. Typically the drills are capable of drilling a core 2.5 - 5 cm diameter up to 10 m long. While most of these drills are designed for <1000 m depth, some can drill in water depths of as much as 3500 m.

Jan 1, 1985

By S. Rajendran

The western continental margin comprises of the southwest coast (Cape Comorin-Mangalore), centralwest coast or Konkan coast (Mangalore-Bombay), northwest coast (Bombay-Gulf of Kutch) and the Laccadives area. Placer deposits of heavy minerals occur in discontinuous patches on the beaches along many parts of the west coast. The richest offshore placer deposits occur along the 25 km stretch of the southwest coast from Neendakara to Kayamkulam. The National Institute of Oceanography (NIO) surveys show that the sediments off the Konkan coast consist largely of silty sand, sandy silt and clay and the concentration of ilmenite is higher than the onshore. The heavy mineral concentration ranges up to 90% and has mainly ilmenite and magnetite with minor quantities of apatite, rutile, zircon, kyanite etc. The heavy mineral sands extend below the clays to water depth down to 20 m. The heavy minerals sands vary in thickness from 2-10 m. Offshore placers can be mined by using wire-line, bucket ladder and hydraulic dredges. Wire-line, bucket ladder and hydraulic dredges. Wire-line dredges may employ drag buckets or clamshell and hydraulic dredges suction or airlift principles. The dredges can be located on flat bottom or catamaran barges. Dredging of very near shore placers may be achieved by operating from land. The bucket ladder type of dredger has greater digging ability and hence can be deployed for mining placers which are partly consolidated or cemented or where the most valuable part of the deposit lies at the contact between the alluvium and the bedrock. This type operates very economically up to 45 m depth and needs minimum power requirement per unit dredged. Suction type hydraulic dredges can be operated very effectively up to 60 m water depths. This system is quite ideal for the inner shelf. The maximum practical economic working water depths for wire-line dredges are about 150 m. With the drag bucket modified into large net buckets, the method can be utilized to greater depths. They can be used in areas of high water currents and swells. The type of bucket can be changed readily with change in the nature of alluvium or substratum. The hydraulic suction dredge is the most suitable system for mining unconsolidated sediments. When the sediments are semi-unconsolidated, a cutter head can be mounted on the lower end of the suction pipe to agitate the seabed.

Jan 1, 1996

By C. R. Pearce, B. Murton, S. Howarth, P. Lusty

"With the expansion of “green” energy technologies, the demand for the critical raw materials required to sustain this growth is increasing. Many E-tech elements, including tellurium (Te) and rare earth elements (REEs), suffer from high supply shortage risk and the need for more diversified metal supply routes is driving research into alternative resources. Hydrogenetic ferromanganese crusts, seafloor deposits of Fe- and Mnoxyhydroxides that form from the direct precipitation from seawater, present a potentially important future source of E-tech elements. With growing interest in the potential wealth of these deposits and the issuing of permits for deep-sea mining and exploration, more work is underway to understand the nature of ferromanganese crust deposits, their elemental concentrations and distributions, and the potential impacts of mining activities.This research focusses on the formation of ferromanganese crust deposits and processes that control the extreme enrichment of elements such as Te, Co and REEs. The crusts were systematically sampled and mapped between ~ 1000 – 4000 m depths using ROV ISIS, from a range of environments, substrates and morphologies from Tropic Seamount (NE Atlantic) in order to determine the seamount-scale factors that control major and trace elemental concentration variations. These factors include depth, surface roughness and micro-bathymetry, location relative to long-term mean current direction and energy, influence of tidal energy dispersion across the seamount, sediment supply, substrate lithology, biological productivity and phosphatisation. The study analyses trace-element characteristics of 100 ferromanganese crust samples alongside standard reference materials NOD-A-1 and NOD-P-1 (US Geological Survey manganese nodules). At this initial stage, we report results from whole rock acid digestion and ICP-MS analyses."

Jan 1, 2017

By J. C. Wiltshire

Both ferromanganese crusts and nodules present potential processors with enormous volumes of tailings of dubious environmental character: most processing scenarios fail to utilize the uneconomic manganese itself, leaving a total waste volume on the order of 96% of the incoming ore. Each current disposal proposal seems flawed: (1) backhauling to the initial mine site is costly and might run afoul of EPA or UN marine dumping*regulations, (2) subsea disposal near a coastal processing site means almost inevitable community opposition, (3) agricultural soil amendment for improving barren lava or coral rubble appears to require prohibitive amounts of supplementary phosphate, and (4) the slag resulting from an energy intensive pyrometallurgical processing may have potential as road ballast, but few processors will opt for smelting in all but those locales where energy is very cheap. This unfortunately rules out a smelting operation in almost any Pacific Island environment. We envision at least one other scenario which could result in both the removal of tailings from a processing plant and an increase in the supply of useful building materials at little or no cost to either the processing or construction industries--transforming a tenacious waste into a novel resource. Ongoing experiments have demonstrated considerable potential for turning acid leach tailings into dark composite facing stone, fancy black tile, novelty ceramics or concrete aggregate. The tailings are commonly very fine grained and may also serve as an additive in drilling mud. Applications as an additive to asphalt also need to be explored. The metal scavenging nature of ferromanganese minerals should be considered as a radioactive waste disposal matrix. There is no doubt that the greatest challenge will be

Jan 1, 1991

By Cheong-Kee Park

Paleomagnetic properties of sediment cores were examined to reconstruct paleodepositional conditions in the Korea Deep Ocean Study (KODOS) manganese nodule area, located in the northeastern equatorial Pacific. The KODOS sediments studied have a stable remanent magnetization with both normal and reversed polarities, which are well correlated with the geomagnetic polarity timescale for the late Pliocene and Pleistocene. Average sedimentation rates were 1.56 and 0.88 mm/kiloyear for the Pleistocene and late Pliocene, respectively. Clay mineralogy and scanning electron microscope analyses of the sediments indicate that terrestrial material was transported to the deep-sea floor during these times. The variations of sedimentation rates with age may be explained by the onset of the northern hemisphere glaciation and subsequent climatic deterioration during the Pliocene and Pleistocene. For the Pleistocene, an increasing sedimentation rate implies that input of terrestrial materials was high, and also a high input of biogenic materials was detected as a result of increased primary production in the surface water. The down-core variations in paleomagnetic and rock-magnetic properties of the KODOS sediments were affected by dissolution processes in an oxic depositional regime. As shown by magnetic intensity and hysteresis parameters, the high natural remanent magnetization (NRM) stability in the upper, yellowish brown layers indicates that the magnetic carrier was in pseudo-single domain states. In the lower, dark brown sediments, only coarse magnetic grains survived dissolution and the NRM was carried by more abundant, multi-domain grains of low magnetic stability. The down-core variation of magnetic properties suggests that the KODOS sediments were subjected to dissolution processes resulting in a loss of the more stable components of the magnetic fraction with increasing core depth.

Jan 1, 2004

By W. H. Pelton

Polymetallic sulphide (PMS) deposits have recently been discovered associated with hydrothermal vents on the sea floor off Vancouver Island, B.C. Visual estimates indicate reserves in excess of 1 million tons. Reliable reserve estimates have not yet been made, however, due to the extreme difficulty of drilling cores in 2 km of water. Few geophysical techniques can aid in the exploration of these deposits. There is little or no difference in radioactivity, magnetic susceptibility or electrical resistivity between the deposits and the surrounding sea floor sediments. This precludes radiometric, magnetic, electromagnetic and resistivity methods. There is a density contrast, but the logistics of gravity surveys at such depths are formidable. The physical property which shows the most contrast with the sea floor sediments, and which is perhaps one of the easiest to measure (with modern equipment) is polarizability. The induced polarization (IP) method is one of the major electrical geophysical techniques for exploring for PMS deposits on land.

Jan 1, 1985

By Nobuyuki Okamoto, Bhaskar Rao

For a period of twenty years - from 1985 to 2005 - the Japan Oil, Gas and Metals National Corporation (JOGMEC) and Pacific Islands Applied Geoscience Commission (SOPAC) have jointly conducted surveys of deep-sea mineral resources in the EEZs of SOPAC’s twelve member countries. The overall Programme has obtained excellent results and has identified numerous sites with potential marine mineral resources of manganese nodules, cobalt-rich manganese crusts, and polymetalic massive sulphides. The survey cruises have identified numerous sites with potential marine mineral resources such as: manganese nodules in the Cook Islands; cobaltrich manganese crusts in the Marshall Islands, FSM, and Kiribati; and polymetalic massive sulphides in Fiji. Based on collected samples and acoustic data, inferred resources for manganese nodule, cobalt-rich manganese crusts, and polymetalic massive sulphides, have all been estimated to be about- 200 million tons in the central Cook waters- 200 million tons in the three seamount selected Marshall waters- and 500 thousands tons around the triple junction of the North Fiji Basin.

Oct 15, 2007

By Andrew E. Grosz

The United States is dependent on foreign imports for about 80 percent of its ilmenite, about 60 percent of its rutile, and virtually all of its monazite. Nearshore marine sand deposits and beach-complex sediments in the southeastern United States are important domestic sources of ilmenite, leucoxene, rutile, zircon, monazite, and a number of other less well known economic heavy-mineral (HM) species. Because global onshore reserves of placer titanium minerals may fall short of demand in as few as 20 years, offshore research in HM placers will become more important. The Atlantic Continental Shelf (ACS) defined by the shoreline and the 200-m isobath varies in width for the modern U.S. coastline from a fraction of a kilometer to about 150 km offshore of Cape Cod, Mass., and includes an area of about 3.91 x 105 km2. It probably contains 3-7 x 1011 m3 of sand and gravel which may locally contain commercially exploitable placer HM deposits.

Jan 1, 1986

By Akuila K. Tawake

The occurrences of polymetallic minerals within the Exclusive Economic Zones (EEZs) of many Pacific Island Countries (PICs) have been confirmed through marine scientific researches and seabed minerals exploration in the last forty years, and are increasingly being recognized by nations as a future potential source of revenue and economic development. For many of the smaller PICs, this may represent the only exploitable natural resource sector apart from fish. SOPAC (then under the CCOP/SOPAC) was actively involved with deep sea mineral exploration in many countries in the South Pacific between the 1970s and early 1980s that led to the discovery of a number of seabed mineral occurrences within the EEZs of these countries. In collaboration with SOPAC, a number of multinational consortia and national agencies were involved in this early stage of seabed mineral prospecting in the region. This was followed by a twenty-year (1985-2005) marine mineral prospecting in the Pacific through the collaborative effort of the Government of Japan and SOPAC as well as the Ridge 2000 program. Other mineral prospecting and marine scientific research initiatives have been conducted in recent years and the most notable one is the Nautilus Minerals advanced exploration in the Manus Basin in PNG. Based on the results of previous exploration, a number of countries in the region with moderate to high deep sea mineral resources potential are identified. Seafloor Massive Sulphide deposits have been confirmed in PNG, Tonga and Fiji while the Cook Islands and Kiribati have high manganese nodule resources potential in addition to significant occurrences of Cobalt-rich Crust within the EEZs of the Marshall Islands and the Federated States of Micronesia. Despite the recent surge in deep sea minerals interest and activity around the Pacific, specific policy, legislation and regulations necessary for the governance of deep sea mineral resources are lacking. Also lacking is the specific technical and human resources capacity essential to ensure that PICs are able to effectively manage these seabed resources. Consequently, SOPAC under the EU funded Deep-Sea Minerals (DSM) Project will work with Pacific ACP States to develop a regional regulatory framework from which they can develop their national frameworks for the sustainable management of their marine mineral resources. The work is of critical importance if PICs are to have effective environmental, fiscal and social management instruments in place for the exploration and exploitation of deep sea minerals that could support economic growth within the region as a whole.

Jan 1, 2010

By S. Rajendran

Much advance has been made in offshore hydrocarbon exploration and exploitation in India. But the same amount of success could not be achieved in the case of other offshore minerals which are amenable for mining. However, employing present technology, there should not be any difficulty in successful exploitation with minimum environmental hazards. A demonstration is provided by considering the conditions prevailing in the Kerala offshore (southwest coast of India) scenario of monazite, ilmenite, phosphatic mud and calcareous deposits. Mud banks are unique phenomenon of the Kerala coast during monsoon season. Acting as barriers to waves, mud banks protect portions of the beaches from being eroded and trap sediments from either side facilitating growth of adjacent beach. The easy minable possibilities of the phosphatic mud during non-monsoon season with less pollution hazards and dumping back the waste material after processing for phosphate at the breaker zones to reduce the erosional effects on the coast make the exploitation economic and ecofriendly unlike the benefication of the lowgrade phosphate ores on land on a comparatively larger area and subsequent crushing, transport and resulting pollution.

Jan 1, 1993

By Yannick C. Beaudoin

Southern Explorer Ridge (SER) is an anomalously shallow, intermediate-rate spreading ridge located 200 kilometers off the west coast of Vancouver Island, Canada. It ranges in depth between 2600 m (deepest basins) and 1760 m (bathymetric minimum). At least 60 sulfide deposits are known to be associated with hydrothermal vent fields along the ridge. For the first time geological data, including deposit locations, collected from 15 marine expeditions to SER since 1983 have been assembled in a GIS format. GIS processing techniques were employed to plot the distribution of base metal concentrations for recovered sulfide samples. The highest base metal concentrations are found in the vicinity of the Magic Mountain site (main active vent field), and also proximal to a side scan sonar anomaly referred to as AGOR 171. Individual samples near these locations have yielded values as high as 29.3 wt\% Cu, 34.3 wt\% zinc, 0.97 wt\% Pb, 2.0 ppm gold, and 664 ppm silver. Sample paucity is the key limiting factor that prevents adequate assessment of the areas economic potential.

Jan 1, 2001

By D. S. Limpenny

Marine benthic habitats are vulnerable to the influence of a wide range of anthropogenic activities (e.g. sand and gravel extraction, dredged material disposal and trawling). Traditionally, benthic ecologists have relied on point sampling techniques such as grabs, corers and dredges to provide information on the physical nature of the substrates and their associated benthic fauna. However, information of this nature only relates to the specific point on the seabed from which the sample was collected and the interpolation of such data to predict the wider distribution of substrata and associated fauna may be unreliable. Our approach uses a range of acoustic, photographic and physical sampling methodologies to produce continuous acoustic coverage maps which can be used to assist with the interpretation of faunal distributions. This approach has been used to assess the impacts of marine sand and gravel extraction at the seabed at two sites off the east coast of England in the southern North Sea. The first study site (designated ?Area 222?) is located 20km off the southeast coast of England and was surveyed in 2001 using sidescan sonar, single beam bathymetry, seabed photography and also a 0.1m2 Hamon grab for the collection of benthos and sediment samples. The main objectives of this investigation were to provide an indication of the spatial distribution of the sediments and macrofauna in the wider area encompassing the dredged site, to evaluate the scope for the effects of marine sand and gravel extraction to extend beyond the boundaries of the site and to provide a wider geographical context for time series investigations. At this site, an acoustic basemap was utilised in conjunction with faunal sampling and photographic groundtruthing, to determine the nature and distribution of the seabed sediments and their associated features. Disturbances at the seabed arising from historic sand and gravel extraction activities were mapped, and this information was helpful in establishing biological cause and effect relationships. The acoustic basemap was also used to target biological reference sites against which the effects of adjacent man-made disturbances could be evaluated.

Jan 1, 2004

By Tap Pryor

A very small nation with large seabed resources requires a strategy. The simplest approach is to duplicate every step taken by the United Nations (UN), in its own leasing programme. In addition, the smaller nations must sell itself and its competitive offering. It is one thing just to await applicants and/ or tenders, another to work to make the leasing seem like a very good idea. This cap be achieved through publications, correspondence, meetings (such as the Underwater Mining Institute, but especially through pro-active planning, seeking the ideal technologies in both harvesting and processing. The ideal would be some combination that could begin quickly and on a small scale. It must be within the UN environmental guidelines. To meet the "quick and small criteria," simple harvesting and physical processing methods must be given the highest priority. Once these are satisfied, then marketing studies can be completed. There is, of course, a market for every element but only careful engineering and cost analysis will determine accessibility. What is required is a stepwise approach, gaining greater and greater credibility at each step. In fact, much planning can be done for very low cost. In the Cook Islands, the first crucial step was the East-West Center publication which pulled together all facts in one volume and which found the local resource to be richer in significant ways than Clarion-Clipperton. Most seem to believe that it could be many years before full production is possible, but this has been conventional wisdom for so long that it has taken on the suspicious aura of myth. Is it real? Have all possible recent technologies such as robotics and physical processing been taken into account? Either way, it is essential that a comprehensive approach be taken so that all factors from resource to market are considered as inter-related until a single business plan emerges. When that is in hand and when its profitability and risk levels are found to be credible, adequate investment funds are available.

Jan 1, 1994

By V. Alexandrov

This paper presents the results of theoretical investigations of the energy requirements of the hydraulic lifting of mined materials from the seabed to the sea surface in the deep-sea mining of solid minerals such as manganese nodules in the Clarion-Clipperton region of the Pacific, situated on the sea floor in water depths of 4,500 m or more. The principal element of the developed underwater transport system is the Underwater Chamber, which is connected by flexible pipeline to a mining machine that gathers nodules from the seabed, mixes them with seawater, and feeds them into a flexible pipeline. In this paper, we discuss the question of the optimum water depth for placement of the Chamber, the interior of which is designed to maintain a 1-atmosphere pressure. We present a method for calculating this depth as it relates to the mechanical characteristics of solid particles, the shapes and size distributions of the particles, particle and slurry density, and other properties. These investigations were carried out in hydro-transport laboratory of the Saint-Petersburg Mining Institute and the hydraulic laboratory of Faculty Environmental Engineering in Wroclaw Agricultural University. KEY WORDS: deposit, nodule, flexible pipeline, pressure drop, concentration, hydromixture

Jan 1, 2005

By Nobuyuki Okamoto

Ferromanganese crusts on the seamounts in the Pacific Ocean are potential resources of cobalt, nickel, platinum and REEs. Particularly, those of the Republic of Marshall Islands and the Federated States of Micronesia (FSM) waters are believed to be of the highest resources potential area in the Pacific Ocean. The total six cruises using the Japanese Research Vessel Hakurei Maru No. 2 were carried out in the seamounts of the Marshall Islands in 1996, 1998 and 2002, and of the FSM in the 1997, 1998 and 2005 for evaluation of economic potential for cobalt-rich ferromanganese crusts as part of the Japan-SOPAC joint project. During these cruises numerous data such as bathymetric, geological, geophysical and environmental data were obtained. Geophysical exploration with backscatter mapping and side scan sonar, visual imaging using towed TV camera and geological sampling using dredge bucket and/or benthic multi-coring system (BMS) were conducted on these seamounts. In this presentation, we will report the mode of distribution of the crusts and calculated resource estimation based on the results of these geological and geophysical shipboard survey and land-based analyses. Keywords: ferromanganese crusts, Marshall Islands, Micronesia, resource potential

Jan 1, 2011

By Peter E. Halbach, Andreas Jahn

"Co-rich ferromanganese crust deposits exist on slopes, summits and platforms of seamounts and guyots throughout the global oceans, where deep-sea currents have kept the seafloor structures more or less free of sediment for millions of years. They form by direct precipitation from cold seawater under more or less oxic conditions and consist of thin layers (2 up to 25 cm thick) covering hard substrate rocks in water depths of 800 to 5000m (Halbach and Marbler, 2009; Hein et al., 2000). Besides Mn these crusts contain interesting concentrations of minor elements (Co, Ni, Ti and Cu) and trace elements (Mo, W, Te, Ga, Pt and REEs), thus they represent significant metal deposits and promise potentially valuable additions to the world’s metal resources.The prospects for mining of this marine type of metal deposits largely depend on the grades and the scale of the potential ore resources. However, only a few percent of existing seamounts and guyots have been mapped and sampled in detail, most of them in the Pacific Ocean. Therefore, a model to estimate the geological resources based on the global seamount catalogue of Wessel (2001; revised: Wessel et al., 2009) and the empirical parameters which control the metal composition and distribution was developed."

Jan 1, 2017

By Kurt Aasly, Przemyslaw B. Kowalczuk, Rolf Arne Kleiv

Seafloor massive sulphides (SMS) can serve as a potential resource of metals such as Cu, Zn, Au and Ag. SMS rock samples from the Loki’s Castle area at the Arctic Mid-Ocean Ridge are comprised of sulphide bearing minerals such as pyrite, chalcopyrite, isocubanite, galena, sphalerite, whereas the gangue consists mainly of barite and silica. Sphalerite, chalcopyrite and isocubanite show complex intergrowth textures on the nano- to microscale. Various mineral processing tests were conducted in order to recover copper, zinc and silver. It was shown that sensor-based sorting can be efficiently used for preconcentration of SMS rock samples. A significant amount of waste (i.e. barite and silica) was removed in the preconcentration stage with very low losses of copper and zinc to the waste fraction. The upgraded samples were sent to the next processing stages. The results showed that the complex mineralogy of the SMS material provided challenges to conventional mineral processing methods. Hydrometallurgical processing was applied as an alternative method for extraction of metals from SMS. Leaching experiments were conducted using solutions of different lixiviants, and it was shown that leaching of SMS together with manganese nodules would facilitate efficient recovery of metals from these resources.

Jan 1, 2018

By Ian Selby

Recent offshore diamond exploration has been concentrated in the SW Joseph Bonaparte Gulf. I`IW Australia. Extensive high resolution seismic and sampling surveys have been carried out in Cambridge Gulf, offshore of the mouth of the OR River and other rivers of the region. Surface-tow boomer surveys have been correlated with sampling data from vibracores and a wide diameter (1m) airlift system, providing a geological framework for the area. Although large-scale bulk sampling has not been undertaken, there has been no reported recovery of diamonds since 1993. The geology and prospectivity of a range of potential diamond traps in high energy, fluvial and transgressive depositional settings has been assessed. Potentially diamondiferous targets include (i) a shoreline apron. (ii) fluvial/estuarine channel infills and terraces and (iii) ravinement surfaces.. Although there is evidence for a long history of fluvial development and sea level changes, the majority of the investigated traps represent the result of erosion and sedimentation during and following the last interglacial. Significant volumes of unconsolidated gravels and coarse-grained sands with occasional indurated layers are present, and are locally exposed at sea beet In place s thick successions (>5m) of fine-grained overburden overlie the coarse-grained sediments.

Jan 1, 1998

By Tobias Hens, Andrew Frierdich, Barbara Etschmann, Joël Brugger, Barrie Bolton

"Advancing our knowledge about trace metal distribution and abundance provides insight into formation, alteration, and trace element enrichment processes of ferromanganese nodules and crusts. A fundamental understanding of these mechanisms, in turn, has implications for the selective recovery of critical metals and the development of sustainable hydrometallurgical techniques. Synchrotron-based X-ray Fluorescence (SXRF) is a powerful, state-of-the-art analytical tool that can examine geochemical features of Fe-Mn nodules and crusts, such as abundance and distribution of trace elements, in an integrated and efficient manner. By correlating trace element composition and Mn oxidation states in these highly complex samples, it can be determined whether these parameters are related to the Mn oxide mineralogy (vacancy content of crystal lattice) and chemistry.In this study, eleven Fe-Mn nodule and crust samples from three circum-Australian locations – the South Tasman Rise, Lord Howe Rise, and Coral Sea – were analyzed at the Australian Synchrotron, Victoria, Australia. Micrometer-scale spatial resolution of geochemical features, such as concentric growth structures and element distribution, was achieved with high sensitivity (Fig. 1). For instance, Ni could be detected at 10's of ppm to 1 wt% levels. Information on other redox-sensitive trace elements, which are present at 10-1000 ppm levels (e.g., Cu, Co, Ti), were gained by means of fully quantitative elemental composition maps."

Jan 1, 2017

By Tobias Hens, Andrew Frierdich, Joël Brugger

The rapid advancement of green technologies in recent years is closely tied to an ever- increasing demand for raw materials. Innovative forms of zero-emission transportation and sustainable power generation will require a variety of traditional metals such as Ni and Co, but also many non-traditional metals (e.g., REY). Many of these elements are known to be highly enriched in deep-sea ferromanganese (Fe-Mn) nodules and crusts. However, unlocking these metals from their deposits through metal processing is – aside from deposit exploration and production – expected to be a critical component that will affect the overall economics of the marine mining value chain. Hence, research and development of tailored metal processing solutions which can target specific metals of interest in Fe-Mn nodules and crusts, is required. Dynamic mineral recrystallization (DMR) of Fe-Mn oxide phases is a geochemical process that may have notable potential for hydrometallurgical applications. We have recently demonstrated that Ni can effectively be cycled between deep-sea Fe-Mn nodules and crusts and solutions through dynamic mineral recrystallization. DMR occurs in nature as abiotic background process during biogeochemical Mn cycling when dissolved Mn(II) is in direct contact with Mn oxides. Trace metals which are incorporated in the Mn host phases, are cycled between solid phase and solution via coupled dissolution (trace metal release) – reprecipitation (trace metal incorporation) mechanisms.

Jan 1, 2018