Search Documents

Jan 1, 1988

CHAIR: I see a great many safety men in the audience and I hope you will all take part in using up the time that we have left. The point brought up by all was the necessity of education. It is very hard to know just how this is going to be done. We get very little encouragement to do this. At a recent meeting at Rock Springs, 100 in attendance, and most of them mine officials. Another condition which contributes to accidents is the labor turnover in many of our States. With many companies I am told from actual statistics the labor turnover is 125 per cent. Each field has different mining conditions so that men coming from one field are not always familiar with the mine conditions in the field they come to. These are conditions which have to be overcome. WM. LITTLEJOHN: Mr. Harrington brought up the subject of sprinkling. I will try to tell what we are doing at the Utah Fuel Company camps. Our dust at Castle Gate is the most inflammable gas that has yet been tested at the Pittsburgh station of the Bureau of Mines, so it is up to us to use every precaution to keep it down. I will try to tell what we are doing regarding sprinkling from tanks. We now have in operation two tanks in our locomotive roads, one in Castle Gate, one in Sunnyside. These tanks are something like 500-gallon tanks with pump on one end of truck which gets its power from the power wire and has a half circle perforated pipe on the other end of tank. This is simply hooked on to the locomotive. When the pump is started up it throws a fine spray of water all around which wets the roof, the sides and floor. We found this very successful from an economical as well as a working standpoint. A roadway that we probably would have had to pay a man at least two shifts for, covering the full distance, with the ordinary hose and spray, we can do in half a day and do it more thoroughly. We are also figuring on at the present time using the same system on rope haulage ways, which of course will have to be run by a reel from the feed lines, handling say four hundred feet each way before reconnecting. We haven't got it finished, but are working on it at the present time. MR. COLBURN: I would like to say a few words -about this question of education. Education was mentioned by all three sections of the Safety Committee. Education regarding safety might be divided into two branches. One branch is for the official at the mine to keep him acquainted with the latest developments in safety equipment and safety methods. The other part of education is for the workmen. The United States Bureau of Mines is co-operating in both directions. Safety Clubs are organized around the Bureau of Mines First Aid Training, but it is the idea to expand those clubs and teach the miner the advantage of such-things as the closed safety lamp, and also the regulations that have been made for his safety. In Illinois we can't operate with the closed lamp, because the miners in that section of the country are not educated to the advantages of the safety lamp. Another form of education has been taken up by the National Safety Council, consisting of voluntary organizations similar to the Institute, to which all mining men are invited to attend. Such conferences nave been held in the Lake Superior district, in Butte, and in Globe, Arizona, this year. These are to be extended throughout the coal mining regions. CHAIRMAN PRYDE: The Union Pacific Coal Company has also built two tank cars of 600 gallons capacity each. The tanks are connected with hose, so that water can flow from one tank to the other. A centrifugal pump is mounted on a truck, and connected to the front tank. This pump takes its power from the trolley wire. The discharge from the pump is perforated, so that it sprays the floor and sides of the entries. We expect to use this water train on main haulage ways where we have no sprinkling line.

Jan 1, 1923

Jan 1, 1927

PRESIDENT LITTLEJOHN: Gentlemen, you have heard Mr. Dyer's paper. The meeting is now open for discussion. MR. NORMAN: I would like to ask the gentleman what is the distance between your crosscuts for the ventilation of rooms and entries in the state of Utah?

Jan 1, 1925

By David Scrymgeour

All low cost coal has been mined. Engineers are searching for a safe and effective way to mine coal seams' deep within the earth. The most modern of these is the RL, an acronym for Robotic Labor. Mining robots are programmed to do specific jobs but can think on their own during an emergency. MR's, or mining robots, usually have a same basic shape. A torso is mounted on treads. Designers chose treads because it gives the robot a great deal of mobility. The torso has two arms. One arm is equipped with a human hand. The other has a human-like hand. Mining is done underground. A small robot goes around punching holes in the coal. A small charge is inserted in the hole. The MR ignites the charge with his laser. It explodes after three minutes. The MR returns to the station where his battery is recharged. Mobile cement barricades are moved between the blasting area and other working MR's. After the charge explodes the barricades are moved to another area. The MR returns and cuts the coal chunks into pieces. Another robot comes and loads the coal and carries it to the loading bin. From there it is taken to the surface where it is weighed and shipped. The whole process was done by robots. Humans just supervise but help in an emergency or malfunction.

Jan 1, 1987

By C. B. Huntress

"We have ourselves to blame in the steel industry for our condition." These words were addressed twelve days ago by James A. Farrell, President of the United States Steel Corporation, to his "comrades" at a meeting of the American Iron and Steel Institute. They carry a note of challenge to all industry, and particularly to the coal industry, where they point the way to the pressing need for operators everywhere to get their feet under one table. It is that note which I would stress to all producers. You have yourselves to blame for your condition. True, there are inter-district competition and competition of substitute fuels, but they'll always be with us, more or less, and the only sensible, sane course is to remove the evils within our respective districts, which can be done only by constructive effort along cooperative lines. It's the same story in Alabama, the same in Illinois and elsewhere. The larger number of the men gathered here are at the front, as it were, in the business of mining coal. They are the men who are doing a remarkable operating job. And naturally, the sessions of this annual meeting treat of news from the front, of technical problems. But, as in actual warfare, those at the front are often uninformed of developments in the rear. They keep on fighting without fully sensing the significance of a disaster at headquarters. You've played your eighteen holes today and evidenced the efficiency of your technique in the, production of coal. It is not amiss to take advantage of this moment, the nineteenth hole, to ponder over what it's all about. After all, what do improvements in the art of mining mean if business policies engulf you in red ink? To the extent that mechanization is a factor in increased overhead, which in turn increases the pressure to produce regardless of market demand, it only aggravates our troubles unless there is the controlling influence of coordinated effort.

Jan 1, 1931

By J. H. Emrick

When I was asked to read a paper to you, I wondered what idea I could bring before you which would be interesting and which would be helpful in your work in operating coal mines. The Institute has been studying ways and means of increasing the safety and efficiency of mine operations. Almost every subject along this line has been discussed from time to time. In thinking the matter over it occurred to me that there was one thing used by practically all coal mining companies in considerably large quantities and which in many cases does not receive the attention it should. It is the cutter bit placed in the cutter chains on coal mining machines. Coal mining machines have been repeatedly improved during the last twenty-five years until their efficiency and convenience have reached a high level. The generating units making electrical power to operate them also have been developed to a similar degree. This machinery has been in- stalled at a great expense to coal mining companies and the installation made for the sole purpose of pulling coal cutter bits through coal. Why not then give these cutter bits some attention so as to see that they do their work as efficiently as their driving and propelling units? The consideration of this question easily divides itself into three principal parts-First, the kina of steel out of which to make the bit; Second, the proper form or shape to give it; and Third, the tempering of the bit. Let us discuss them in that order. There have been tried at different times' various grades of steel for cutter bit uses. The cheaper steels, having a very low carbon content (.10 to .30 per cent carbon) have proved un- satisfactory because such steel cannot be tempered so as to produce a satisfactory cutting tool. Because of the low carbon content, it cannot be hardened to retain its cutting edge. It dulls quickly, bends easily on striking any hard obstruction in the coal, and so requires constant resetting to its original form. The high priced alloy steels when properly shaped and tempered will give a bit that would make a clean, even cut in the coal if no impurities were encountered. Such a condition is rarely found. Alloy steel is quite brittle and on striking impurities, such as sulphur balls or a sand spar, is readily broken and so the loss of material through these broken bits and the high price paid for it more than offset all the other advantages which this steel has shown in cutting. Experience has shown that steel having approximately .70 per cent carbon and from .25 to .35 per cent manganese will give the most economical results. Some mines have obtained better results by using a steel of slightly higher carbon content and in some cases a grade of tool steel has been used. The disadvantage of using a steel having too much carbon is that it can easily be spoiled in the black- smith shop by overheating. Steels having a carbon content of about .70 per cent have a sufficiently wide range of temperatures at which they can be forged and hardened so that with ordinary care and attention they are not likely to be burned. Steel of this quality, therefore, has been found to be the most practicable because of its reasonable cost, ease in working and tempering and general durability. In the early days of mining machines, comparatively few bits were used because each machine required but a few bits because there were but

Jan 1, 1925

By S. W. Farnham

We have listened to many papers describing mechanical loaders, and systems of mining planned to increase their efficiency. We have become familiar with the various types and in a general way, their capacities and limitations. Messrs. F. E. Cash and E. H. Johnson in Bulletin 17 of the Carnegie Institute of Technology, subject Coal Mining Investigations, have a very complete review of the loading situation then. Mr. A. W. Dickinson, in a recent paper before this Institute, gave a later illustrated review of mechanical loaders. On page 28 of Cash & Johnson's paper is a list of loading machines to which might be added to bring the list down to date, the following: Under Digging and Loading Machines The Goodman Power Shovel Under Scraper Loaders The Goodman 436-G-3 125 H. P. three drum Scraper loader The Goodman 35 H. P. Entry loader and the Two Drum 125 H. P. Hoist built by Vulcan of Denver for scrapers Under Shaking Trough Conveyors The Eickhoff Conveyor The Link-Belt Conveyor The McCarty Duck-bill which is really a digging and loading element built to attach to the end of and operated by a reciprocating conveyor. The outstanding feature in this line of work in the past few years is the fact that a few very successful operations have been worked out on a large scale; the officers and staff in charge of this work have gone into details very thoroughly and altered and improved, in many cases, their mine equipment and mining methods, and by the exercise of persistent energy and intelligent effort, in the face of frequent difficulties and discouragements, they have attained results that are far ahead of the average loader operation. The coal mining industry owes much to these men for the pioneering and development of mechanical loading; their investigations in transport, shooting, shearing, snubbing, cleaning, and production costs, the results of which they have given freely and frequently to the public, are of great value. Foremost among the pioneers in this work are the Union Pacific Coal properties, the Quealy properties, the Sheridan Wyoming Coal Company and in the Central West, the Union Colliery Company of Illinois. On the other hand, in the great majority of installations, one loader, or possibly two or three loaders have been started in a given operation and through failure to make the proper effort to improve their transportation and work out the systems to utilize their loading machines, the loaders have not shown appreciable savings and in many cases, the installation has failed. It has been frequently stated in many meetings where loading has been discussed, that the idea of mechanical loading must first be sold not only to the operating staff but to the entire personnel of any company where installations are made. The problems involved in the successful application of this equipment are such that it requires enthusiastic and wholehearted teamwork on the part of everyone connected with the work and when difficulties arise, they must be ready to exercise initiative and try new ways oftentimes of overcoming impediments. The closest attention now is given to the question of economics how much will a loader reduce the cost of coal in any particular situation? Without fear of successful contradiction, I believe that experience up to date has unquestionably shown that where the shovel type of loader can be properly used, it produces in wide work, the cheapest coal of any loading device yet brought onto the market. Naturally there is a considerable difference between the results from different makes of shovels.

Jan 1, 1926

[Participating Scholarship Colleges and Universities 148 Andalex Resources, Inc 99 Big Sky Coal Company 118 Canyon Fuel Company, LLC 100 Coal Age 141 Commercial Testing & Engineering Company 103 Continental Conveyor & Equipment Co 104 Copper Mountain Resort 139 Cove Shoe Co., Inc 116, 117 Dakota Coal Company 105]

Jan 1, 2000

[HORACE MOSES President Gamerco, New Mexico BENEDICT SHUBART Secretary-Treasurer 521 Boston Bldg., Denver, Colorado ROBT. L. HAIR Vice-President for Colorado VIRGIL R. McKNIGHT Vice-President for New Mexico A. E. GIBSON Vice-President for Utah THOS. FOSTER Vice-President for Wyoming EXECUTIVE BOARD COLORADO: J. B. DICK Walsenburg C. M: BILLINGTON Lafayette NEW MEXICO: W. C. HOLMAN Dawson ROBT. WYPER Gallup UTAH: R. R. KIRKPATRICK Sunnyside GEO. A. SCHULTZ Latuda WYOMING EDWARD BOTTOMLEY Kleenburn QUINCE RICE Superior]

Jan 1, 1926

MR. MARGOLF: Our final speaker this afternoon before we have an opportunity for some questions for the members of the panel, is a gentleman who has spent more than 40 years in the newspaper industry. He started out as an office boy while he was still in high school. He worked his way through college working for a newspaper in Lexington, Kentucky where he graduated from the University. He has a long association with the Albuquerque Tribune but what brings him here today is in his position as editor of The Rocky Mountain News which is certainly one of our largest circulations. I think it is the largest circulation newspaper in the Rocky Mountain states. Ralph Looney, in that

Jan 1, 1982

Thomas J. LIEN RMCMI PRESIDENT 1997-1998 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 94TH Regular Meeting and Convention to be held June 27 thru June 29, 1998 Snowmass Village, Colorado

Jan 1, 1997

Jan 1, 1929

The morning session opened at 9:00 a.m. and was presided over by Carlyle F. Gronning, Chairman, Industrial Commission, State of Utah, Salt Lake City, Utah. The first speaker was John A. Fagnant, Vice President-Sales, Kemmerer Coal Company, Frontier, Wyoming. Subject - "Open Pit Coal Mining, Western States." Mr. Fagnant is a graduate of Colorado School of Mines, 1937 Degree, Metalurgical Engineer His career in the mineral industry began at the Arthur Mill of Kennecott Copper Company. For nine years he was with Allis Chalmer Company in Milwaukee, Wisconsin as a Sales Engineer in the Mining Machinery Division. Following five years in private business, he joined The Kemmerer Coal Company as a special projects engineer specializing in coal carbonization. He was assigned the job of Sales Manager in 1968 and promoted to Vice President of Sales in 1970. Member of A.I.M.M.E.

Jan 1, 1975

By Franklin P. Wood

Unnumbered ages have passed since the time when nature's laboratories were working without the aid of capital or labor unions assisted only by earth's cooling crust and old Sol's rays, to lay the prodigious coal beds of the earth and distil the oils which now furnish the basis for the world's great industries. Strangely enough rays from the same old sun probably somewhat diminished in intensity are still drawing from earth to clouds the water that will run down hill and through man-made devices produce energy to compete with that made with the products created in ages past. So now we find that within the past century vast human industries have grown up around the products of these agencies and here we are today discussing the many problems connected therewith and among the others the subject of this paper, which is essentially the relation of COAL to OIL in industry. The problems involved are those of human relationship and are not fundamentally unsolvable when engineering skill and knowledge is properly applied. The last few years has developed a brand of pessimism that is especially prevalent in the coal industry, at any rate in the west where we come in contact with it. In any general discussion with coal men, a very short time only is required to bring out the feeling or expression that the coal business is on the rocks and the reasons run the gamut of human deviltry. We have heard that in the not far distant past corn was so cheap that the farmers were compelled to burn it and thus deprive the coal mines of their well earned right to sell coal for this purpose. We have heard that the flood of oil is so vast that it was being burned in preference to coal, and to heap insult on injury that the rail- road locomotives were burning oil in order to pull coal away from the mines. We have heard that the union was responsible for all the woes to which the industry is subjected. We have heard that the family tin lizzie is so depleting the family exchequer that coal could not be purchased and if purchased could not be collected for. We have heard that producing mines are so numerous that the profits are a negligible quantity. These are but a few of the reasons assigned for making the coal producers a class of pessimists which is not good for the industry. All these reasons given and all the others must be taken collectively and these are not the cause but the effect of a rapidly changing civilization. An analogy may be found in the experience of many of us in the electric industry a few years ago. You may remember that less than 20 years ago the high efficiency Tungsten electric globe was introduced. It was so much more efficient than the old carbon lamp that only one-third of the current previously required was needed to produce the same illumination. Consternation seized the ranks of electrical men who had little or no vision, for the out- look was that so little current would be sold that everyone would be bankrupt. This limited vision, however, did not prevail, for all engaged in the industry spurred on by necessity, accomplished many of the things that we are now enjoying the fruits of be- cause the electric industry has grown and is growing by leaps and bounds and every highly efficient improvement is greeted with rejoicing. It is well known that when the old type of carbon arc lamp began to be replaced by modern units the manufacturer of carbon rods thought his doom was sealed and yet these same manufacturers have so adjusted them- selves to conditions that the dry battery business of today is of vastly greater volume and profit than was the carbon rod business of the past. Of course, there are industries that should not have survived anyway that have gone down and out to makeway for vastly improved conditions and can

Jan 1, 1925

T. T. READ, BUREAU OF MINES: Mr. McAuliffe has asked a very practical question. Expressed in another way, the question is: If we have decided to use rock dust to prevent coal dust from exploding, have we got to take rock, that is, solid material,, break it up and finally grind it into dust (and fine grinding is very expensive), or can we take material that is already in a pretty fine state of subdivision and thereby save the expense of pulverizing it? Most of the preceding discussion has been from the view-point of practical experience, and I should like to suggest that we have not had enough practical experience in rock dusting to be able to answer this question, from the viewpoint of experience, with the degree of definiteness that Mr. McAuliffe desires. With your permission I will discuss the matter briefly from the theoretical standpoint, because after all the theoretical considerations, insofar as we understand them correctly, will apply to every' case, whereas in coming to a decision on this matter it will be necessary to take into consideration local conditions, which will necessarily vary in every case. Considering the matter in a rather elementary way, the first point is: What makes coal dust explode? The air of this room is full of dust at the present moment, even though we do not notice it. If you were to close up the room for a week, enough dust would settle on the floor so you could write your name on it. Of course, the dust which is in the air of this room is not coal dust but even if it were coal dust and you were to bring an open light in' here we all know that the dust would not explode. The reason for that is that the dust particles are not close enough together for the flame to propagate itself from one to the next. You will probably be able to see in the demonstration in the gallery on Saturday that the coal dust explosion is practically a very rapid burning of the dust. When you light one piece of dust it burns and gives out heat and if there is another piece of dust close enough to it so that the heat from the first piece is able to bring a second piece up to the burning temperature, then the flame will propagate itself through the mixture. But, if the particles are so far apart in the air that the' heat from one particle is dissipated before it reaches an adjoining one, and is therefore not able to bring the second particle up to the burning temperature, then the flame will not propagate. To get a coal dust explosion, it is not sufficient to have coal dust suspended in the air. The coal dust particles must be close enough together in the air so that the heat from one burning particle is able to heat the adjoining particles up to the point at which they will burn. There has been some discussion of the size of dust particles that will cause an explosion to propagate, and it has been pointed out that the minus 200-mesh dust is the most dangerous, and that particles coarser than 20-mesh will not propagate an explosion. There are two reasons for that. A large particle has very much smaller surface in proportion to its weight than a small particle has. You know the old story about the Indian who when asked how he could go around in cold weather without any clothes on said that an Indian was all face. A 200-mesh particle is almost all surface and there= fore is able to burn almost instantaneously, which means that it gives out its heat almost instantaneously, whereas a large particle with less surface in proportion to its weight burns more slowly, gives out its heat more slowly, and the heat has more time to be dissipated. The second reason why coarse dust does not easily propagate a flame is because it is so hard to make it

Jan 1, 1924

Jan 1, 1982

The Role of Partnerships ?Industry history ?Companies were their own kingdoms ?MSHA and NIOSH were out of touch and focused on enforcement with no direction ?Labor and management were constantly at odds with each other

Jan 1, 2002

[Arsulich, Thomas Mechanical Engineer, S.A.E. House, Laramie, Wyoming Barrett, A. Lee joy Mfg., Co., Research Engineer, Franklin, Pa. Bartlett, Rulon Salesman, 265 S. Seventh East, Salt Lake City, Utah Beauchamp, Paul N Goodman Mfg. Co., Sales Engineer, 2509 S. Monroe, Denver, Colorado Boyle, J. J Mine Superintendent, Roundup, Montana ?Burnell, Patrick H Gebo, Wyoming]

Jan 1, 1950

The 69th Regular Meeting of the Rocky Mountain Coal Mining Institute convened in Manor Vail Lodge, Vail, Colorado, and was in session at 10:00 a.m. The meeting was called to order by Past President Joseph E. Ward, former District Manager, Denver Office, Coal Division, Joy Manufacturing Co. and now retired. Mr. Ward, after reading a brief biography of President O. F. "Os" Lewis, introduced him to the assembly. Biographical sketch read as follows: Mr. Lewis is President, General Manager, and a Director of Colowyo Coal Company. "Os" was born in Reno, Nevada. He attended the University of Utah at Salt Lake City, Utah, and later the Denver University in Denver, Colorado. His career in the Western Coal Industry started back in 1923 when he was employed by the Central Coal and Coke Company of Salt Lake City, Utah, as a clerk, then chief clerk and as a traveling sales representative for a period of 13 years. Later, in 1936, when that company was acquired by an affiliated company of Harris Coal Company, he was transferred to Denver as Assistant Sales Manager, Purchasing Agent and later as Executive Assistant to the President.

Jan 1, 1973