Search Documents

By Gao H

Based on the author's research and plant practice experience of the last decade, several technological approaches have been developed to increase the recovery of gold and silver associated with sulphides. This paper gives a general discussion of some technological problems encountered in this area in five aspects and introduces the different approaches employed in three typical mineral processing plants to increase recovery of associated gold and silver. On the basis of studying occurrence characteristics of gold and silver minerals in sulphide ores and of determining loss locations of gold and silver on flotation process, a remarkable improvement on the recovery of gold and silver in all these three plants was made by choosing proper grinding fineness, using combined collectors of good selectivity, properly decreasing the grade of main metal concentrates, making reasonable arrangement of the products of main metals, or a combination thereof.

Jan 1, 1993

Fluid bed sulphation roasting of bismuth concentrates began at Warrego in 1980 in con- junction with the recommissioning of the Tennant Creek Smelter. This process, develop- ed by Peko Mines, is used to separate copper and bismuth by converting copper minerals to a water or weak acid soluble form and then leaching. Pilot scale testwork conducted at the Australian Mineral Development Laboratories (AMDEL) and by Dorr Oliver Pty Ltd in the USA indicated that close control of bed teaper- atures and exhaust gas composition was required to ensure high levels of soluble copper. After overcoming some initial problems, the plant now achieves typically 89 percent copper extraction. Plant capacity is 2.7 tonnes/h by design but in practice this is limited by feed analysis, air requirements, cyclone operation and calcine particle size Consideration.

Jan 1, 1984

By Weller KR

Computer programs are described which help the metallurgist to process sample data from a plant survey; to carry out simple mass balance calculations; to present the results of circuit and equipment performance in convenient form; and to simulate the circuit response to changing operating conditions. The uses and limitations of these programs are explained by following through a case study of the sulphide flotation circuit at Cleveland Tin Ltd. The circuit was sampled, the data analysed, and some process inefficiencies established. Simulation calculations were then made to provide information on which to base decisions regarding possible circuit changes aimed at improving performance.

Jan 1, 1983

Gallery Stoping, an old but little used stoping method, has been reintroduced to workings at the Paringa South Shaft.Orebodies which are amenable to such a method are being mined in this manner with considerable advantages and savings.The advantages of gallery stoping as used at Paringa, compared with traditional mining methods are:1. constant cash flow2. low set up cost and initial stope development3. nearly 1005 recovery 4. no access problems 5. quicker tonnagesAs compared with highly mechanized mining methods, it has been found to be slower but requires less development, gives improved grade control, has less impact on the surrounding rock and fragmentation is much better, reducing secondary blasting costs.This paper examines the mining method and illustrates the advantages of gallery stoping at Paringa.

Jan 1, 1985

By Sorokin AP

The main regularities of the tectonic history of the Circumpacific belt's Asian segment are discussed. The established longitudinal metallogenic zoning is characterized by essential copper specialization being replaced in the.continentward direction by tin-tungsten and then by copper-gold-molybdenum and-tin-lead- zinc ones. The zones indicated show specific magmatism and ore forming fluid composition. The eastern margin of Eurasia experienced specific tectonic history and exhibits a wide variety of mineral deposits. It is composed of the Siberian and Sino-Korean cratons and of the largest mobile elements of tectonosphere like the Hyperborean, Urals-Mongolian, Mediterranean and Circumpacific belts. The Earth's Atlantic segment mobile features show deep penetration of their geosyncline-fold systems into the eastern margin of Asia. A good example is the Urals-Mongolian belt, its Intra-Asian branch being located within the continental margin. The Intra-Asian structural features have WE and NE trending, while folding process moved southward : Karelides and Baikalides are found in the Transbaikalia and the Soviet Far East (Stanovoy, Bodaibo-Patom, Baikal- Vitim, Selenga-Yablonovy fold regions)

Jan 1, 1987

In those days no one worried - there were plenty of other things to do. But in'these days it is different. Everyone worries- and. because there is so much worry, emotion has entered the picture. And, worse than that, capital is being made in political circles. People who were quite unaware, five years ago, that any problem existed, have now become experts on the subject, and shout to high heaven that something should be done - and yet they go on using the leaded high octane petrol they deplore so much. And even scientists, who should know better, adduce only such evidence as fits the argument in hand. And the Press is not without blame - some of its reportings is open to serious question, whatever may be the excellence of its motives. The point is made that one should know what one is talking about. And make sure that the evidence quoted is fact - and make sure too, that all the evidence is used, not only that which suita the argument.

Jan 1, 1971

By S Moradi

The thickener overflow of zinc concentrate, obtained from flotation process in the Angouran plant located in Iran, contains a large quantity of slimes which were transferred to the tailing ponds. These slimes have caused problems of storing and environmental aspects in the Angouran area. The objective of this research is to describe the extraction of zinc from these slimes by leaching method using sulfuric acid in pilot plant scale.Chemical analyses showed that these tailing materials contain 35 per cent of zinc. By XRD analysis, smithsonite is identified as the major constituent. Calcite, dolomite, and cerussite are found as carbonate minerals. A minimal amount of Zn occurs as hemimorphite. Quartz, kaolinite, clinochlore and muscovite are other silicate minerals in the slimes.In the optimal conditions, ie acid leach at pH of 1, temperature of 55¦C, reaction time of 120 minutes and solid-liquid ratio of 1:3 and neutralisation with Ca(OH)2 at pH = 4.5, temperature = 70¦C, time = 90 minutes, the total recovery of zinc obtained was 95 per cent.

Jan 1, 2004

Workplace Centred Learning, (WCL), is a learning strategy which helps organisations cope with the constant change in skill requirements that is part of business today. WCL focusses on the specific needs of the workplace and provides the structure and sets the standard whereby the required competencies can be transferred between individuals. Learning is considered part of the job and ownership is achieved by involving individuals in all aspects of the learning system. Each individual in a WCL system is considered both a learner and a teacher. A significant advantage of WCL over conventional training systems is that it responds quickly to changing requirements, and once in place, becomes self-sustaining. That is, once implemented, the system provides mechanisms to detect and respond to changes in skill requirements as they arise. WCL is a competency-based system with multiple levels of validation. It provides a flexible approach to skills development that recognises both the needs of the workplace and the needs of the individual. WCL was developed in collaboration with ALCAN Aust Ltd and is currently being implemented by companies within Australia and overseas.

Jan 1, 1995

By Lai KF

The Hellyer orebody is a fine grained, massive sulphide Pb-Zn-Ag- Cu-Au deposit located in western Tasmania. Initial testwork showed that the orebody would be difficult but not impossible to treat by conven- tional flotation. A staged programme-of work was commenced to demon- strate that marketable concentrates could be produced with satisfactory recoveries. Following laboratory testing of drill core to define two flowsheets, bulk samples of Hellyer totalling 20,000 tonnes were trialled at 6 tph in the Cleveland concentrator over six months. The high through- put and extended duration of the trials ensured maximum confidence in the results and that scale-up to subsequent plants would be with a mini- mum of risk. The milling trials were successful and the Cleveland concentrator was expanded in early 1987 to treat 250,000 tpa of Hellyer ore to produce 85,000 tpa of bulk concentrates. Late in 1987 construction commenced on a 1 mtpa concentrator at Hellyer to produce separate copper/silver, lead, zinc and bulk concentrates.

Jan 1, 1988

In the Ora Banda area of the Eastern Gold- fields, the ultramafic rocks tend to be more deeply lateritized than most of the surrounding rock types, and lateritic nickel concentrations have been formed. Extensive drilling_has shown that, of the two intermixed suites be- neath the laterite - an extrusive peridotite- pyroxenite suite and an intrusive, highly magnetic dunite - the latter weathers to a more nickel enriched laterite. The top horizon I of the laterite consists of ferricrete. Horizon II consists mainly of bands of secondary silica in a clay matrix, formed in the reworking zone around the water table and stranded as the weathering profile migrated downwards. Horizon III ('ºaprolite") is composed of serpentinite, magnesite, iron oxides and silica, and grades dowil to the fresh bock composed variously of olivine, ser- pentine, talc, amphibole-chlorite and iron oxides. The main locus of nickel deposition is the zone containing the bottom of horizon II and the top of horizon III. The water table is also at this general level. .

Jan 1, 1973

By S Slusarczyk, Z Kozlowski

Vibration of surface caused by seismic quakes can make a risk to great mining costruction. We have to do with this risk in the Belchatow open cut mine where seismic quakes of various energy and range have occured since the end of 1970s. The seismic risk influence on the mine structure with the special attention to the slopes of an internal dump has been presented. Hydrogeological and geotechnical conditions of the lignite mining and internal dumping of overburden and ash from Belchatow power plant have been considered. Seismic activity in Belchatow open cut from 1979 to 2001 was described and the connection between mine working and seismicity of this area was investigated. The energy and approximate location of the quakes and seismological parameters of the strongest ones observed from 1995 to 2001 were presented. The mechanism of the quake focuses was determined by means of the primary-arriving wave method. Stability of the slopes was evaluated by means of the Fellenius method. It has been found that seismic events occured in Belchatow region may cause only local eboulements whereas there are not any safety risks to the stability of slopes of the internal dump in Belchatow open cut.

Jan 1, 2003

One of the more recent developments within the mining industry has been the adoption of formal continuous improvement programs. A continuous improvement (CI) program was launched across Kalgoorlie Consolidated Gold Mines (KCGM) in early-2002. The purpose of this program was to identify further operating improvements within departments. The focus of the continuous improvement program was not only on the areas of the operation which were performing below expectations but also on areas of the operation which were performing well but could still be further improved.The effectiveness of a continuous improvement program depends on the stability of the processes in place and the participation of many employees from all levels of the business.Continuous improvement has had some successes and failures at KCGM and this paper will discuss both within the open pits department. Further improvements that could be made to the process will also be discussed. Kalgoorlie Consolidated Gold Mines Fimiston operation is located in the Kalgoorlie Goldfields and it the largest gold mine in Australia producing over 800 000 ounces of gold per annum.

Jan 1, 2004

The Australian industrial relations system is in a state of constant change. We are undergoing a transformation from a compulsory arbitration and an award based system to one which is fundamentally rooted in the concepts of enterprise bargaining. This is true both at the State and Federal level. The structural changes which facilitate the movement away from the predominance of Awards to enterprise agreements has been fostered by both sides of the political spectrum and is a cornerstone of their respective industrial relations platforms.In determining what form or combination of forms of industrial instrument(s) should apply to the individual enterprise, employers must have regard to the viability and sustainability of each form in the changing industrial climate. In particular employers should have regard to the needs and agendas of their employees and unions which may purport to represent Them.

Jan 1, 1998

By Williams DJ

Preliminary calculations suggest that spoil piles in the Bowen Basin will undergo approximately 4 m settlement as the ground water table recovers after mining is abandoned. Approximately 1 m of differential settlement is possible. Superimposed on this will be a long term creep settlement of 1-3 m/log cycle of time. Depending on the nature of the spoil material, partially submerged spoil piles could be sufficiently stable although to ensure stability during long term creep it may be necessary to flatten the final spoil pile face to approximately 25¦.

Jan 1, 1987

The paper outlines the philosophies and the methods applied to resource estimation by North Flinders Mines Limited at The Granites. These are based on recognition of the prime importance of quality data, accurate geological perception of the deposit, and the judgement of the estimator. With reference to one particular deposit, East Bullakitchie, the series of resources statements published over a 5 year period is compared with the corresponding history of discovery and development. The comparison Illustrates:

Jan 1, 1990

This address is set deliberately in the broadest possible terms. A review of the place of mining in Australian life today will serve to point up the changes that we can see in the life of people in the industry. Some of the influences on the future welfare of mining people bear also on the progress of this Institute, now approaching its 90th year. As mining becomes more and more dependent on higher technology and therefore, on the higher skills of the people in the industry, the role of The Institute, I suggest, becomes more and more significant.With investment per employee in mining generally continuing to rise, our ability to handle problems of manpower and human relations becomes a matter of greater importance.Questions that flow from these general thoughts form the substance of what I have to say.

Jan 1, 1982

By Parker RL

A 250 tons per day ammonia-ammonium carbonate leaching plant is now being operated by Samin Limited, to extract copper from the oxidised ores at the Burra mine. This forms the first stage of a plant, which will eventually have a capacity in excess of 1,000 tons per day. The article reviews the history of the mines at Burra and the metallurgical studies which have been undertaken since the old mines closed in 1917, in an endeavour to recover the copper from the low-grade deposits left by the original miners. The reasons why an ammonia leaching process was selected instead of the conventional flotation or acid leaching methods are discussed. The paper concludes with a detailed description of the plant and the basis on which it was designed.

Jan 1, 1971

A Devonian metallogenic province is extended northwards from central Queen- -sland to the Burdekin Basin in the Charters Towers Gold and Mineral Field. Devonian sediments of the Burdekin Basin are intruded by mineralised quartz felspar porphyry which occurs as pebbles in Upper Devonian conglomerate. A mineralised volcanic complex lies on the crest of an anticline in Devonian sediments.Red siltstone is slurried and reduced to pyritic hornfels over folded limestone.A thick wedge of volcanogenic conglomerate overlain by marine shale lies on the mineralised rim of an ocean which suffered cataclysmic changes during Late Devonian times.

Jan 1, 1987

By S Morrell, D Clark

æMine to MillÆ improvement involves optimising the chain of rock breakage processes from the in situ rock in the mine to the output of the concentrator. A growing number of paper studies and case histories from metalliferous mines (AusIMM, 1998; JKMRC, 1998; Clark and Scott, 2002) demonstrate that generating more breakage in the pit and the primary crusher can lead to benefits to milling that result in significant improvements to the economic performance of a mining project. However, unless the ævalueÆ of doing this (benefit over cost?) can be appropriately quantified, the approach cannot be effectively managed and the increases in blasting and monitoring costs cannot be justified.Mining operations have traditionally been organised into the separate departments of geology, mining and processing based on the specialist skills required and the different professional disciplines involved. Process optimisation across these boundaries has commonly been frustrated by management requirements to minimise the costs incurred by each department without adequate reference to the ævalueÆ being created. Companies have tended to discard positions that provide a technical over-view of the value chain, reducing the number of people with the opportunity to influence practices across these process boundaries.This paper discusses these issues and identifies measures required to quantify and manage the ævalueÆ provided by æMine to MillÆ improvement generated by the intense blasting of ore.

Jan 1, 2002

Esso Australia Ltd. operates a large natural gas producing system in the Gippsland Basin, supplying gas to the Gas and Fuel Corporation of Victoria, the State Electricity Commission of Victoria and several industrial customers. Gas reaches the Longford processing plants from three offshore platforms via a network of large diameter pipelines, which must be protected against the formation of ice-like hydrates. When gas production commenced in 1969, methanol was used to inhibit hydrate formation in the offshore pipelines. However, later investigations showed that the methanol was causing excessive degradation of molecular sieve in the onshore gas-processing plants. (Molecular sieve is used to remove water and H2S from the gas prior to further processing to remove heavy hydrocarbons.)

Jan 1, 1982