Search Documents

By Alberto Nei Carvalho Costa

Devido às novas tendências de design de carrocerias de automóveis, as peças pertencentes a estas carrocerias apresentam características de fabricações cada vez mais críticas, principalmente relacionadas ao processo de estampagem. Uma forma de atuar neste processo para evitar perdas de produtividade, principalmente com o rompimento do material, é atuar na lubricidade entre o material e o ferramental do equipamento. A aplicação do óleo lubrificante na bobina de aço é uma forma de atuar na lubricidade, mas devido à criticidade de estampagem que determinadas peças apresentam, somente o óleo lubrificante não é suficiente para este fim. Visando atender essa necessidade, a CSN e seus fornecedores desenvolveram um sistema de lubrificante para seus aços, conhecida como tecnologia de pré-fosfato. Este trabalho tem como objetivo apresentar as vantagens fornecidas pelo aço pré-fosfatizado no que se refere a estampagem crítica de peças automotivas, bem como avaliar o seu impacto no processo de pintura automotiva. Como resultado verificou-se que a camada de pré-fosfato impactou na redução do coeficiente de atrito do aço zincado de forma suficiente para confecção de peças críticas de carrocerias de automóveis. Verificou-se também que o filme de pré-fosfato é totalmente removido na etapa de desengraxe do processo pintura automotivo, não prejudicando as etapas subseqüentes do processo: fosfatização e pintura.

Jul 30, 2018

By Liming Yuan, Isaac Zlochower, RICHARD THOMAS, Thomas H. Dubaniewicz, Teresa Barone

Mining vehicle manufacturers are developing lithium-ion (Li-ion) battery electric vehicles as an alternative to diesel-powered vehicles. In gassy underground mines, explosion-proof enclosures are commonly used to enclose electrical ignition sources to prevent propagation of an internal methane (CH4)-air explosion to a surrounding explosive atmosphere. Li-ion batteries can create pressurized explosions within sealed enclosures due to thermal runaway. Researchers at the U.S. National Institute for Occupational Safety and Health (NIOSH) measured thermal-runaway pressures of lithium iron phosphate (LFP) cells as a function of free space within sealed enclosures and observed an inverse power relationship. A well-confined cell produced 4260 psia (294 bar) of pressure during a thermal runaway, far exceeding minimum pressure containment specifications for conventional explosion-proof enclosures. Results indicate that adding enough free space surrounding LFP cells can reduce thermal-runaway pressures to levels below that expected for CH4-air ignitions. Measured thermal-runaway temperatures were below the minimum autoignition temperature of CH4-air.

By K. Rushdi, B. E. Abulnaga

The conventional Froude number is blind to the presence of solids, their density and their concentration in a stream of slurry mixture such as tailings flowing in an open channel. This often leads to rough approximations of subcritical, critical and supercritical regimes, based on one phase flow Froude number, limiting subcritical to a value smaller than 0.8 and supercritical to values above 1.4, as proposed in the past by Green, Abulnaga and other authors. While acceptable for small flows, such approximations can be uneconomical for the larger flows encountered in some modern plants that treat up to half a million t/day. A review of concepts of a densimetric Froude number sheds some light on the effect of solids on stratification prior and subsequent to a hydraulic jump. While the approach is heavily borrowed from modern sedimentology, it provides a useful tool to designers of large launders or open channel tailings systems. These concepts are reviewed with some practical examples.

Jan 1, 2013

By R Saha, D Barry, C Mawdesley, O Bertoli

Kriged estimates are not typically calculated on blocks substantially smaller than the sample spacing (eg the Standard Mining Unit or SMU). Moreover, the sample spacing for quality variables is often much greater than the SMU size. For short to medium term planning decisions, the shorter term variability in the quality variables is a key economic consideration in defining, setting and meeting coal product specifications.Global uncertainties can be calculated using Drill Hole Spacing Analyses (DHSA). However, knowing the precision of a variable for a one or two year production volume is usually not adequate for variables with low spatial continuity that may fluctuate significantly over daily, weekly, SMU, or shipment volumes.Is there a feasible, reasonable and valid geostatistical method to model the uncertainty of coal quality variables on blocks substantially smaller than the drill spacing (say on the SMU)?The validity of using co-kriging variances, calculated on SMUs to characterise local uncertainty, was tested using a suite of conditional simulations generated for several quality variables for BHP’s Blackwater operation. The conditional simulation results were used as a benchmark against which the results derived from the kriging variances could be compared.The agreement between the kriging and simulation methods for thickness is excellent, with much closer correlations than for the quality variables. Typically, the kriging variances give very reasonable approximations to the simulation-based uncertainties, although there could be some systematic discrepancies which may become much more critical if a classification is to be based on a thresholding of the SMUs relative uncertainties.CITATION:Mawdesley, C, Barry, D, Bertoli, O and Saha, R, 2017. Local uncertainty benchmarking – a coal case study, in Proceedings Tenth International Mining Geology Conference 2017, pp 43–50 (The Australasian Institute of Mining and Metallurgy: Melbourne).

Sep 20, 2017

By Ângela Selau Marques

A fabricação de matrizes para forjamento a quente vem sendo estudada com maior atenção nos últimos anos devido à necessidade de fabricação das ferramentas com maior rapidez e menor custo, estudo do processo de usinagem, com melhores propriedades mecânicas a fim de aumentar sua vida útil. Para atender as atuais necessidades do mercado são utilizados softwares de CAD e CAM e principalmente de máquinas CNC, que além da rapidez garantem a qualidade da usinagem das matrizes. O objetivo deste artigo é demonstrar, através de um estudo de caso, as etapas para a fabricação das matrizes superior e inferior, para forjamento a quente. Foram utilizados sistemas de CAD e CAM, o SolidWorks para modelagem da peça e das cavidades da ferramenta, e o software Edgecam para a programação e simulação da usinagem. As facilidades obtidas com a integração entre os sistemas CAD/CAM e máquina CNC conferem a manufatura de ferramentas muitos benefícios, dentre eles destaca-se a rapidez com a qual se pode fabricar uma matriz.

Aug 8, 2018

By K. Feledi

"A booster fan is an underground mechanical ventilation equipment installed in series with a main surface fan that is used to boost the air pressure provided by the surface main fan passing through it. As mining continues to expand and go deeper, the need for improved and efficient ventilation increases. This has led to the use of booster fans and other auxiliary ventilation devices in underground mines. This paper details experiments and results carried out at Missouri S&T Experimental Mine that investigated air leakage and recirculation caused by the use of booster fans. The results were compared with the situations where booster fans are used and not used.The variables considered were the booster fan blade angle and the fan combinations. Air quantity measurements were taken at each individual stopping under a number of scenarios and across four blade angle settings. The first set of situations examined were; the main surface Joy fan only running, the main Joy, and the west booster fan running, and the main Joy fan and east booster fan running. Observations were made which lead to the conclusion from the experimental analysis that booster fans affect the behavior of leakage and recirculation. The locations of the booster fan and the blade angle setting have the most effect on leakage and recirculation. To limit the potential for system leakage and recirculation, the location and size of a booster fan in a ventilation system should be thoroughly evaluated.INTRODUCTION Missouri S&T Experimental Mine ventilation system The Missouri S&T Experimental Mine has two shafts. One currently serves as the main intake shaft. Air is forced through the main shaft by a Joy Manufacturing Vane Axial fan and follows the direction shown on the map on Figure 1. The air is currently naturally exhausted through the Wheeler portal. As indicated on the map there are eight stoppings in the mine, with stoppings number 2 and 8 fitted with man doors. The mine also consists of three raises which are either fully or partially blocked, two portals with one acting as an exhaust and the other generally closed by a hydraulic Kennedy door."

Jan 1, 2015

By Javier Moya, Marco Jauregui

Compañía Minera Antamina viene enfrentando diversos desafíos relacionados al movimiento de material expit a consecuencia de la profundización de sus áreas de minado, desbroce requerido para acceder a las zonas mineralizadas y mayores distancias de traslado. Así mismo, la interacción del minado entre las Fases de niveles superiores e inferiores presenta restricciones por temas de seguridad, bloqueo de vías, necesidad de remanejo de material y bajas productividades de los equipos.

Sep 29, 2023

By Yuri Alberth Piñas Esteban

El siguiente trabajo técnico describe la importancia del uso de los detonadores no eléctricos de doble retardo y los cojines de agua como espaciador, en los taladros del techo y tajeos, puesto que su aplicación reduce el daño al macizo rocoso. El uso de estos detonadores no eléctricos de doble retardo minimiza la sobrerotura, crea labores más seguras y reduce las vibraciones en el macizo rocos, mientras que los cojines de agua son usados para disminuir la presión de detonación en el taladro, de forma que aminora el daño al macizo rocoso.

Sep 14, 2009

By F Burns, G Peachey

The Hidden Valley process plant has recently undertaken a program to relieve process flow bottlenecks and improve process automation. An environment of cost reduction and restrained capital necessitated solutions that primarily utilised existing equipment and internal resources. Removing bottlenecks relieved pressure from a strained circuit that was unable to maintain consistent performance. Improved process automation firstly stabilised the process, then allowed the circuit to sustainably operate at the expanded capacity limits. These allowed implementation of an operating approach that focused process operators towards identifying and resolving process disturbances in advance. Plant recovery and throughput have markedly improved as a result.CITATION:Burns, F and Peachey, G, 2014. Recent process improvements at Hidden Valley gold mine, in Proceedings 12th AusIMM Mill Operators’ Conference 2014 , pp 43–54 (The Australasian Institute of Mining and Metallurgy: Melbourne).

Sep 1, 2014

By Kevin Green, Iván Contreras, Aaron Grosser, Jon Ausdemore, Rachel Leier, Amr Ragy

"Construction of a new tailings dam was required to increase tailings storage capacity at a trona mine near Green River, Wyoming. The new dam was founded on overburden soils underlain by both fractured and competent bedrock. The stored tailings and water had high salt content, resulting in salty seepage water. To reduce the impact of the salty water on groundwater and the Green River, the design of the new tailings dam included a 257,260 SF (23,900 m2) seepage cutoff extending into competent rock.An extensive subsurface characterization was performed prior to completing the design and suitable seepage cutoff methods were evaluated. The approach selected was a full replacement panel using hydromill and clamshell for construction and self-hardening slurry (SHS) for the wall material. Laboratory testing was performed and ongoing monitoring has continued to evaluate the hydraulic conductivity and seepage cutoff performance in the briny environment.The paper includes project background, the collaborative approach and outcomes of the QA/QC program, and the monitoring results for the seepage cutoff wall.PROJECT BACKGROUNDCiner Wyoming, LLC (formerly OCI Wyoming, LLC) owns and operates the Big Island Mine facility near Green River, Wyoming. This underground trona mine has produced soda ash since 1962. The Greater Green River Basin covers much of southwestern Wyoming and extends into northeastern Utah and northwestern Colorado. The Ciner facility is located in the Green River Basin, which is part of the Wyoming Basin physiographic province. The Green River runs to the west and the south of the Ciner facility.Beginning in the early 1990s, Ciner primarily disposed tailings underground in mined-out panels. However, in recent years, underground storage has become limited and some disposal has transitioned to the ground surface. Long-term planning revealed a need to expand Ciner’s surface tailings disposal capabilities. Pond 2, a previously permitted disposal area, was identified as the most viable location for a storage facility. The Pond 2 site is directly north of the Ciner plant facilities, northwest of the active Upper Delta tailings storage facility, and northeast of the Green River (Fig 1)."

Jan 1, 2016

By K T. Broekman, R L. Koenig

"The Braemar Iron Formation is atypical ore when compared to the current magnetite ores being processed. In attempting to process and economically recover the vast quantities of iron ore stored within the Braemar Iron Formation, æshifting the paradigmÆ is required. The formation has a low Davis tube recovery (DTR) grade of 15 - 20 per cent, which is much lower than magnetite ores processed in Australia. Despite this, by thoroughly testing and understanding the ore characteristics, it is found that the Braemar ores have significant advantages to processing than the harder banded iron formation (BIF) and taconite resources.The Hawsons magnetite iron ore resource has been known from the early 1960s when CRA explored the area. The grade was low and the Pilbara region discovery lead to the development of high-grade direct shipping hematite ores. Carpentaria Exploration (CAP) rediscovered the magnetite whilst undertaking multi-commodity exploration in the Broken Hill district during 2009. Shifting the paradigm away from grade the advantages of processing this ore are achieved by having an extremely low waste to ore ratio, lower Bond work index, lower abrasion levels and high-grade magnetite concentrates with little impurities other than silica. While developing the Hawsons Iron Project (HIP) it became more apparent that a positive business case is achievable when the following factors are exploited: very large resource - the resource is contained within one pit the rock fractures easily along grain boundaries - ideal for cheap impact crushing of the ore the ore is extremely soft, with a Bond work index of 6.3 - 8.0 kWh/t all major infrastructure required is readily available - rail, power, access and port the mine is in close proximity to Broken Hill - rich mining history and skill set available the resource contains many billions of tonnes of magnetite mineralisation.Shifting the paradigm by selecting equipment suitable for processing soft ores and not hard BIF or taconite ores and taking locality and available infrastructure into account may change the way people approach new low-grade resources in future.CITATION:Koenig, R L and Broekman, K T, 2013. Understanding ore characteristics and equipment selection, in Proceedings Iron Ore 2013, pp 403-410 (The Australasian Institute of Mining and Metallurgy: Melbourne)."

Aug 12, 2013

By O. A. Ojo, N. Esmaeili

"The effects of brazing and use of composite powder mixture as interlayer material on hot corrosion resistance of brazed IN738 superalloy were studied. Brazing was observed to result in significant reduction in the hot corrosion resistance of the superalloy. However, application of composite powder mixture, which consists of additive superalloy powder, enhanced the hot corrosion resistance of brazed samples. It is also found that although the use of composite powder mixture increased hot corrosion resistance of brazed alloy, if the additive powder completely melts, which is possible during brazing, it can significantly reduce the hot corrosion resistance of the brazed joint. Elemental micro-segregation during solidification of the joint with completely melted powder mixture produces chromium depleted zones and consequently reduces hot corrosion resistance, since a uniform distribution and adequate chromium concentration is necessary to combat hot corrosion. This has not been previously reported in the literature and it is crucial to the use of composite powder mixture for enhancing the properties of brazed superalloys.INTRODUCTION Superalloys have been developed in response to the increasing demand for materials with higher resistance to corrosion and creep and also with higher mechanical strength at higher temperatures (Smith, 1981). Ni-base superalloys are predominantly used in manufacturing hot sections of gas turbine engine components. This is due to their high strength and corrosion resistance in extremely high temperature service environments which is typical for hot sections of gas turbine engines (Miglietti, 2009). The continuous demand for higher efficiency and output has resulted in the use of higher operating temperatures and gas pressure in modern gas turbine engines (Jahnke & Demny, 1983). Consequently, this has caused thermal and mechanical stresses which result in severe degradation and damage of gas turbine engine components due to creep, fatigue and hot corrosion (Zhang, Feng, & He, 2006). The decision to replace or repair damaged parts depends on the overall repair cost and expected life of the repaired components (Jahnke & Demny, 1983). However, in most cases, it is more cost effective to repair damaged parts rather than use a full replacement."

Jan 1, 2017

By Maylin Mendoza, Sheyla Pinto, Edwars Espinoza

En Cerro Lindo , la producción anual del oro en los últimos 05 años ha fluctuado entre los 3,500-4,500 Oz/troy, con una ley promedio de 0.05 g/t adquiriendo mayor importancia dentro de la cadena de producción de la unidad minera Cerro Lindo. Por ello con este trabajo se buscó caracterizar el comportamiento del Au en un yacimiento Tipo VMS- bimodal félsico, donde el Au, no es un elemento principal, y por ello, muchos en nuestras campañas de exploración le restamos importancia, sin saber el valor agregado que le puede dar a lo largo de nuestra producción; con este trabajo queremos mostrar esta nueva metodología basada en una visión más integral donde el conocimiento geológico nos lleva a incrementar valor a nuestros yacimientos.

Sep 29, 2023

By Eric Lindquist, Scott Chambers, Rob Jameson

The Salt Lake Temple is undergoing its most significant renovation since its dedication in 1893. The renovation includes a seismic retrofit of the historic stone structure’s foundations using base isolation. This paper focuses on the temporary underpinning of the 16 to 35 feet thick unreinforced masonry perimeter walls of this massive structure. Conventional needle beam or direct structural underpinning approaches to support the Temple in place during base isolator installation were precluded by its immense weight and extremely thick walls. The design-build team instead developed a unique temporary support of excavation (SOE) program to allow the 19-foot-deep excavations for the new base isolator foundations. The SOE scheme allowed the massive structure to be supported on confined soil “columns” located directly below the masonry wall footings while excavation to construct the new foundations was advanced concurrently along the Temple’s outer perimeter and inside the building. Shoring system stiffness was critical to mitigate settlement risk for this historic building and construction methods were selected to minimize detrimental installation effects.    The structural engineer’s permanent design required sequentially jacked steel pipes immediately below the walls, which were filled with post-tensioned reinforced concrete to create transfer beams. After completion of the foundation excavation, two new grade beams separated vertically by base isolators were constructed along both the interior and exterior sides of the perimeter walls. The concrete filled steel pipe transfer beams were structurally connected into the upper grade beams above the isolators. After load transfer is completed, the soil directly below the walls will be excavated to allow free movement of the structure and grade beams above the base isolators in the event of a future earthquake. The historic temple SOE and underpinning system employed multiple construction methods, including micropiles, secant piles, tieback anchors, tensioned tie-rods, temporary attachments to the jacked permanent steel pipes, hand-dug underpinning piers, permeation grouting and steel structural headers supporting interior walls. Design and construction of the historic retrofit SOE system is detailed in this paper.

Oct 7, 2024

By Paulo Sergio Olivio Filho

A aspersão térmica é utilizada para produzir revestimento quando há necessidade de aumentar a vida útil de sistemas e peças, podendo ser também utilizada na recuperação delas, em alguns casos. Com o intuito de compreender melhor o processo de aspersão térmica por chama a pó, o objetivo deste trabalho é analisar os fatores influentes no aumento de espessura depositada pelo processo, utilizando o delineamento de experimento de Taguchi para avaliar os fatores e níveis dos fatores que geram as melhores condições de aplicação para o revestimento. Para isto, foram escolhidos três fatores de controle com três níveis cada um, dos quais foi possível seu controle em laboratório. A deposição foi realizada em chapas de aço SAE1020, e revestida com pó de alumínio não atomizado. A seção transversal dos revestimentos foi analisada por microscópio ótico. Os resultados dos experimentos foram analisados através de estatística descritiva, gráfica e análise pelo delineamento de Taguchi, baseada na análise de Sinal/Ruído. Sendo evidente que os fatores do processo são estatisticamente significativos: número de passes, fluxo de nitrogênio e a taxa de alimentação de pó. Esta análise se mostrou eficaz, gerando os resultados esperados para otimização dos parâmetros do processo.

Aug 8, 2018

By S. M. Saghaeian

The studies on the product finer than 12 mm due to crushing and sizing plant of Gol-e-Gohar Iron Ore mine showed which this material contains significant amount of valuable iron minerals. Based on the carried out experimental studies on representative samples of fine hematite iron ore, a processing flow sheet was designed to upgrade iron content. This plant is known as first hematite iron ore enrichment plant in Iran which the dry medium intensity magnetic separators (with magnetic field intensity 4500 gauss and high gradient) has been used. The main objective of the plant is production of high iron product with iron content more than 61% and weight recovery more than 55% from the feed with iron content of 54%. In this plant, at first material are screened by a single deck screen (6mm), then oversize particles is separated at one stage by magnetic separator, while undersize ones at two stages. Based on the results of experimental tests, a final high iron product with iron content of 62.4% and weight recovery 63.9% can be achieved. It should mention which the iron content can be enhanced through increasing the speed of magnetic separators especially at the part of separation of finer iron ore.

Jan 1, 2014

By Kimberly Conner-Mills

Due to increasingly stringent worldwide environmental regulations for gaseous, aqueous and solid waste emissions, conventional smelting technology cannot effectively process arsenic containing materials. Many globally significant copper properties have copper sulfide mineralogy that has a high arsenic content present as enargite with significant contained precious metals. As global copper, silver and gold demand increases while significant world resources decrease, treatment of sulfide orebodies with enargite is becoming increasingly important. Methods to selectively dissolve and fix arsenic, leaving behind clean copper and precious metals-bearing concentrates could effectively treat these ores.

By Ana Beatriz Ferreira Sousa

Compósitos são hoje uma importante vertente para o desenvolvimento de produtos com propriedades específicas. Quando compósitos são produzidos a partir de materiais renováveis e biodegradáveis, estes se tornam sustentáveis, devido à sua fonte de matéria prima. As fibras naturais vegetais são abundantes em todo o mundo e responsáveis pelas propriedades mecânicas das plantas, que representam um potencial alvo de estudo no desenvolvimento de materiais “verdes”. Baseado nisso, o objetivo desse trabalho é produzir compósitos de matriz polimérica termoplástica reciclada com fibras naturais de bambu longas, provenientes de biomassa regional, e analisar a influência das fibras como reforço nos compósitos. Realizaram-se os processos de lavagem, mercerização e acetilação para tratar quimicamente as fibras. Os resultados, quando comparados com a literatura disponível, indicaram que o compósito reforçado com as fibras longas de bambu modificadas apresentou melhores propriedades mecânicas que sua matriz polimérica. Por consequente, constata-se que se obteve êxito a partir das técnicas utilizadas.

Oct 30, 2017

By Michael Windhager, Karl H. Ziehenberger

ULTIMA® are high performance, centrifugal cast, double poured (CC duplex) work rolls. This paper describes the principle of the ULTIMA® roll concept and its wide range of usability. The ULTIMA® concept provides a solution for rod and bar mills to increase performance and output, even under harsh rolling conditions. The main focus is on highly loaded mill stands that require both high wear resistance and resistance against thermal fatigue, like pre-dog bone, dog bone, slitter. Specific case studies of quite different mill configurations and rolled product mix prove the positive impact on production yield, mill and roll shop operations, and profitability in terms of TCO (total cost of ownership).

Oct 1, 2019

By T. Loos

The Norddeutsche Affinerie operates an Outokumpu-Flash-Furnace as a smelting unit. The pyrometallurgical slag cleaning process is based on the slag reduction and settling in the electric furnace. Since 1972 when the slag cleaning furnace was built the throughput could be increased fourfold. However, an extensive optimisation effort is required in order to keep the copper loss low. A parameter study with a neuronal network model based on real process data was conducted to identify parameters impacting on the copper loss in the slag. It could be demonstrated that the main parameters responsible for copper loss in the final slag are fixed parameters of the flash furnace. For a better understanding of the copper loss in the electric furnace microscopic analyses of the slag structure and viscosity measurements were performed. Based on these results the reduction and settling of the copper containing droplets could be increased in both pilot plant studies and industrial scale. 4

Jan 1, 2007