Search Documents

By Taylor Stevenson, Takefumi Takuma, Andrew Rose, Chris DellAringa

The city of Huntington Beach is a coastal community along the Pacific Ocean in Southern California with a series of intracoastal flood channels that run through densely populated residential areas. The Huntington Beach Channel and Talbert Channel Sheet Pile Repair Project was designed to improve flood protection for surrounding Huntington Beach communities. The project consisted of installing over 16,000 linear feet of new steel sheet piles adjacent to existing steel sheet piles that line the sides of both flood control channels. This paper studies the unique project dynamics and constraints, and highlights the capabilities of the press-in piling method for sheet pile installation.

Oct 31, 2023

By Vijaya Rao Parigela, Jason Redgers

A 6m height approach ramp was proposed connecting the new railway line at ground level with the existing, elevated line and facilitating an intersection. The ramp mainly consists of a reinforced concrete box section with rising top elevation following the gradient of about 6 degrees for a total length of 120m. Based on the provided SLS loads, resistance was required for 75 kPa to 280 kPa loading pressures. Soil stabilization using Deep Soil Mixing, DSM technique was chosen as alternative to CFA piled foundations by the client to limit settlements. Generally, soil conditions consisted of a made ground layer comprising of granular and cohesive deposits underlain by boulder clay and the Pennine middle coal measures. The specifications for treatment were based on the Federal Highway Administration Design Manual: Deep Mixing for Embankment and Foundation Support and required improving the strength of the made ground below the reinforced concrete elements to an acceptable stiffness such that the structural and track bed movements are acceptably small, and future settlement is mitigated to less than 20 mm, with a maximum of 10mm occurring following the track installation. Verification testing to prove that design requirements have been achieved included coring and testing of samples, as well as zone load pressure test. As such the design necessitated a grid of 2.0m diameter DSM columns with target UCS strength of 0.75 MPa. A load transfer platform (LTP) of 0.5m thickness enclosing 2 layers of geogrid was provided on the top of the treated ground to enhance and ensure uniform transfer of the loads.

Oct 31, 2023

By Md Kausar Anik, Ramin Motamed, Peiman Zogh

The earthquakes that occurred in New Zealand and Japan in 2010 and 2011 caused significant damage due to liquefaction. Engineers have adopted various ground improvement techniques to reduce the impact of liquefaction-induced damage, and one of these techniques is installing a sheet pile next to the foundation. However, the optimal depth into a non-liquefiable soil layer for having appropriate fixity of the bottom of the sheet pile remains unclear. To address this issue, a series of moderate-scale 1g shake table tests were conducted to evaluate the effective embedment depth of the sheet pile required to mitigate liquefaction-induced foundation settlement. A 1/5 scaled model consisting of three soil layers with varying densities, namely the crust, liquefiable, and dense layers, was prepared. A shallow foundation was placed over the crust layer and a sheet pile at a horizontal distance of 0.625 times the foundation length from the center of the foundation was inserted into the soil at various embedment depths using the press-in technique. The test results indicated that the foundation settlement could be reduced by 62% and 72% when the sheet pile was embedded to 50% and 100% of the dense layer thickness. It was recommended that the sheet pile be embedded at least 50% of the firm stratum thickness to achieve optimal performance.

Oct 31, 2023

By Joe Welna, Lola Moussey

The Minnesota Department of Transportation (MnDOT) evaluated several concepts to minimize flooding of Trunk Highway 35W (TH35W) near downtown Minneapolis. A deep stormwater storage facility (SSF) was selected for final design. Given the constricted project footprint, open trench excavation construction methods were not feasible, and a top-down construction approach using diaphragm walls (d-walls) was utilized. The SSF is located near the edge of a glacial valley containing glacial and alluvial deposits including cobbles and boulders. Categorizing ground conditions was critical in assessing constructability of the SSF and determining project cost. Multiple phases of geotechnical investigation were conducted including geotechnical borings, geophysical surveys, and pump testing. Obstructions (including cobbles and boulders) were encountered at some of the borings conducted and therefore were anticipated to be encountered during construction. As part of development of a project risk register, it was decided by the Owner that the Contractor should assume no obstructions during d-wall construction, and obstructions encountered during construction would be paid using funds allocated in a project risk pool, which was informed by a Geotechnical Data Report (GDR) and Geotechnical Interpretive Report (GIR). The cells of the structure were successfully completed in 2022 with final completion anticipated for the fall of 2023.

Oct 31, 2023

By Cody Telgheder, Mamoun Laraki

The U.S. Department of Energy (DOE) Hanford Site had a multi-decade career of supporting America’s defense system during World War II and the Cold War. A multi-reactor site, DOE Hanford produced plutonium for atomic weapons and steam for generating electricity. In addition, a network of nuclear facilities was built and used to support the research and development process, like 324 Building contained within the Hanford Site’s 300 Area. In 1989, after closing its doors to plutonium production, the DOE, Environmental Protection Agency (EPA), and Washington State Department of Ecology took on a challenging, legally binding accord to clean up the Hanford Site. As part of the final clean-up project within the 300 Area, CH2M Hill Plateau Remediation Company (CHPRC) contracted Apollo Mechanical Contractors who contracted Nicholson Construction Company (Nicholson) to design and construct an underpinning micropile system to support excavation efforts directly underneath the 324 Building “B-Cell” structure which in turn would facilitate the complete removal of the contaminated soils directly beneath the structure. The work was completed in complex and challenging conditions that required an airtight drilling system, two layers of protective clothing, a hood with a Powered Air Purifying Respirator (PAPR), the use of long reach tools, and continuous radiological monitoring. This paper will address the design, construction, and challenges encountered with underpinning a structure within a highly sensitive Category II nuclear environment.

Oct 31, 2023

By Will Frampton, Rachel Salter, Zoe Baldwin, Tim Hampshire

Cementation Skanska were responsible for the design and installation of 200 linear meters of contiguous bored piled retaining wall and approximately 1300 bearing piles for a new commercial arena development in the North of England. Building new retaining walls adjacent to existing infrastructure presents numerous challenges concerning limiting disruption and potential damage to services. The retaining walls formed a partial basement meaning horizontal propping was not practicable. To provide time and cost saving to the project, Cementation Skanska developed a novel, space saving solution to traditional raking temporary propping of the retaining walls. The contiguous wall was propped in the temporary condition by perpendicular secant piled buttresses positioned to avoid the permanent works. The buttresses were constructed from existing ground level simplifying the construction sequence by negating the requirement for additional temporary works associated with conventional propping systems. This paper describes the design and construction of the buttress wall solution, considering retained heights up to 8m, with challenging ground conditions including worked coal seams. The design considered onerous deflection criteria focussing on the services running under the dual carriageway along the East of the site and complex loading conditions from the permanent propping solution resulting in a prop stiffness envelope. The paper will detail the design process for the buttress piles and contiguous piled wall, and the iterative prop stiffness approach utilising Plaxis 2D & Geosolve Wallap. This innovative approach to propping saved the project time and cost by omitting the need for additional temporary works following construction of the wall piles and allowing berms to be removed much earlier. This solution was also considered safer to operatives than raking props. Monitoring was undertaken during the excavation phase of the project and measured deflections were below those predicted during the design process, which could create efficiencies on future projects.

Oct 31, 2023

By Karen Dawson, Qiang Li

Unreinforced displacement augercast piles, or rigid inclusions (RIs), were installed for foundation support of a combined sewer overflow treatment building. The RIs penetrated loose silty sand and soft silt and terminated in medium-dense to dense silty sand, approximately 40 ft below grade. The building houses water-holding basins and level-sensitive weirs and equipment. Strain gage-instrumented static axial load tests and low strain pile integrity tests (PIT) were conducted on the RIs as part of quality control for this technology. Strain gage monitoring continued during the installation of the remaining production RIs, construction of the building, and water preloading of basins and channels within the building. While the composite RI-reinforced ground and load distribution mat system performed as expected for settlement control and was not needed for lateral support, RI fractures as observed by PIT in this project might need to be controlled in other situations. Case history information regarding the subsurface fill and deltaic deposit character, RI installation production rates, RI testing procedures and results, and construction settlement monitoring are presented.

Oct 31, 2023

By Jacob Blake, Dan Dwyer, Tulin Fuselier

The recent renovation of Boston City Hall’s Plaza, one of Boston’s premier public meeting spaces, involved heavy construction and grade changes over the country’s two oldest subway tunnels, built in 1898 and 1902. These tunnels presented unique challenges throughout the course of the design and significant logistical issues that had to be carefully managed during the construction process. Despite these challenges, the renovation of the Boston City Hall Plaza has been a major success. This paper aims to explore the successful outcome of the project, highlighting how effective teamwork and collaboration between Owner, Contractor and Engineer played a crucial role in overcoming the challenges faced during the project. The paper also intends to provide insights on how such collaborative efforts can lead to the achievement of a project's goals, despite the hurdles encountered along the way.

Oct 31, 2023

By Rendon Rieth, John Bryant, Kourosh Tamizdoust, Amr Helal

Expansive soils are widespread in the Southern, Western, and Rocky Mountain areas of the United States. Expansive natural clays and bedrock can expand upon wetting and shrink upon drying. These soils can cause damage to structures, roadways, and pipelines. Accurate estimation of volumetric deformation of expansive soils is critical to minimizing damage to the nation’s infrastructure. Free-field heave is the amount of movement the ground subsurface experiences due to wetting/drying of the soils within the active zone, with no surface surcharge load (e.g., foundation load) applied. Active zone is the depth below the ground where the soil volume deformation can still occur due to moisture/energy changes in unsaturated soils. Several methods for free-field heave estimation have been developed over the years including empirical methods and using oedometer swell test results and soil suction values. Further, in the past decade, most numerical studies have been performed to determine the free-field heave by incorporating hydro-mechanical framework which disregards the temperature effect and usually considers one-way coupling between the moisture flow and swelling/shrinkage deformation. The main objective of the current study is utilizing a strongly coupled thermo-hydro-mechanical (THM) model for the estimation of active zone depth and free-field heave when the soil is subjected to real-time climate conditions. The THM model, input thermal, and hydraulic/mechanical data are implemented in COMSOL Multiphysics software. The results are compared with experimental data from a case study in the Colorado Front Range area. The Soil-Water Characteristic Curve (SWCC) and Hydraulic Conductivity Function (HCF) are based on the Van Genuchten (VG) model and the mechanical constitutive model, which governs swelling deformation, is based on the Extended Barcelona Model. The THM model predicts the active zone reasonably well. Moreover, the simulation of free-field heave is compared with the analytical calculation produced by VOLFLO software.

Oct 31, 2023

By Barry Sheppard, Abid Adekunte, Alec Hinder

The main competencies of a chartered/professional engineer include demonstrated abilities to implement knowledge, skills and attitudes towards the restriction of the amount of natural resources consumed on projects, limitation of the quantities of wastes produced during construction, whilst ultimately minimising the overall carbon footprint associated with every scheme. These are important obligations to the environment and society that must be dutifully fulfilled by every practising engineer, by continually striving to maintain reasonably good balance between safety and economy on every project. In support of the above professional obligations, this paper details independent literature review of shaft adhesion factors that are appropriate for the economical designs of CFA-bored piles in clay in the UK and Ireland. The geotechnical appraisals had originally been carried out by Deep Foundations Specialists (DFS) as independent 3rd party-checks to resolve disputes between a number of piling contractors and structural warranty companies in respect of the design aspects of the piling works for large scale residential developments in Hampshire and Cambridgeshire, England. The geotechnical appraisals are supported with case histories of 15 No. historical piling projects completed, static load-tested and backanalysed in different geographical regions of the United Kingdom & Ireland. Essentially, the literature review confirms the shaft adhesion factor,  = 0.6 adopted by the piling contractors in designs for the initially disputed schemes to be appropriate, safe and economical, albeit higher than the generic value,  = 0.5 recommended by guide documents including the BS8004 (2015) and the London District Surveyors Association’s Guidance Note No. 1 for the Design of Straight Shafted Bored Piles in London Clay (2018). The conclusions of the literature review ultimately resulted in the acceptance of the piling contractors’ designs by the structural warranty providers. The paper recommends that whenever it is possible, design engineers should place greater reliance on site-specific pile test data or pile test data from other sites with similar ground conditions, pile geometries and pile installation methods, in order to produce the most economical and sufficiently optimised pile design for every site.

Oct 31, 2023

By Ryan Nagle, Eric Lindquist, Rob Jameson, Kelli Mccurdy, Serena T. Jang, John Gouchon

This paper discusses the challenges associated with the design and construction of a deep basement in downtown San Jose, California for the 200 Park Avenue project. The aim is to present the critical design issues, how the challenges were addressed, details of the selected shoring design, and the performance of the shoring system during construction. The critical design issues that will be discussed related to retaining the deep excavation and constructing the basement include shallow groundwater, artesian pressures, settlement outside of the excavation, shoring earth pressures, and shoring wall movement. Subsequently, the paper will describe why a tied-back cutter soil mix (CSM) cutoff wall was selected as the shoring system and how it addressed the critical design issues. The design of the tied-back cutoff wall will also be discussed. Lastly, the performance of the tied-back cutoff wall during dewatering and excavation and how it compared to the design will be included. The performance was measured through a monitoring program, including survey data points and piezometers.

Oct 31, 2023

By John Turner, Joseph Hakim, Peter Faust, Benjamin Turner, Michael K. Muchard

An overview is presented of a unique axial bi-directional load test performed on a 3.0-m diameter (118inch) drilled shaft in January 2023 in Tucson, Arizona as part of a bridge replacement project. The shaft was excavated using crane-mounted grab tooling, resulting in a slightly curved base and corresponding uncertainty about the nominal base resistance relative to a conventional flat excavation base. The shaft was approximately 80 ft long and the load assembly was installed about 8 ft above the base. The load assembly location was selected to balance the estimated axial resistance above and below the jacks, as is customary. However, the presence of a 13-ft thick layer of strongly-cemented caliche with unexpectedly high compressive strength (2.8 to 5.1 ksi) produced higher than anticipated side resistance above the load assembly, resulting in a very stiff reaction against which significant load was transferred to the bottom segment. The maximum test load of approximately 9,000 kips resulted in just 1/8-inch upward displacement of the top segment and 5.0 inches of downward displacement of the bottom segment when the jacks reached their maximum stroke. Mobilized unit side resistances for the top segment ranged from about 2 to 9 ksf. Mobilized base resistance was on the order of 75 ksf. Since a primary objective of the load test was to confirm unit base resistance exceeding the AASHTO limit of 60 ksf for refusal blowcount sand, the test was deemed very successful and allows significant optimization of drilled shafts for the project. The test results also confirm that a curved base resulting from grab tooling can generate significant base resistance.

Oct 31, 2023

By Matthew Paquet, George Aristorenas, Philip Shull, Mike Senior

The Long Slip Canal is located in Hoboken, New Jersey. To reduce flood risk and raise the site for future rail facilities, New Jersey (NJ) Transit constructed an extension to the Combined Sewer Overflow (CSO) and backfilled the canal. A significant challenge of the site was the compressibility of the soft marine clay in the canal during backfilling and impacts to adjacent CSO structures and an existing king-pile wall due to lateral spread of the clay. To limit impacts to the aforementioned structures when backfilling, NJ Transit’s designer specified soil mix ground improvement to be designed by the contractor. The contractor elected to Value Engineer (VE) the ground improvement with a pile-supported concrete Load Transfer Platform (LTP) to be constructed in the wet. Since the VE design bounded structures designed by NJ Transit’s designer, emphasis was placed on the impact of the VE design on adjacent structures. This paper will cover the unique aspects of this VE design and construction, including: comparison of the 2D and 3D Finite Element analyses, use of concrete to function as a LTP for underwater construction, and construction challenges in soft marine clays.

Oct 31, 2023

By Gerhard Lang

Due to the worldwide population growth, the development of sustainable infrastructure and the exploration of renewable energies play a key role. The increasing need for complex building structures involve the development of innovative deep foundation technologies. Conventional methods like bore piles reach their technical and economic limits under certain conditions. As an alternative, new mechanized technologies, mainly coming from the tunnelling industry, have been developed to overcome challenging mixed ground conditions, high groundwater tables or economic limits in greater depths. For more than 20 years, the mechanized Shaft Sinking technology (VSM) has been in operation to build foundation and shaft structures all over the world, for tunnelling projects or for intelligent underground parking systems. More than 100 circular shafts have been built with reinforced concrete lining, mainly through difficult, groundwater bearing soil, in depths of up to 115 meters. The VSM is completely remote-controlled from the surface and covers a diameter range from 4.5 to 18 meters. Offshore foundations, especially in non-drivable ground conditions and medium water depths require drilled installation methods. The Offshore Foundation Drilling (OFD) technology, based on the concept of a full-face tunnelling machine, enables a rapid and economically drilled installation of offshore foundations in variable ground conditions and rock strengths. In 2022, drilling works for the subsea installation of 73 monopile foundations have been completed with OFD for the St. Nazaire wind farm in France. With a drilling diameter of 7.7 m, this OFD equipment is currently the largest offshore drilling rig. This paper will present the mechanized technologies of VSM and OFD with their application fields and benefits to the construction industry.

Oct 31, 2023

By Bengt Fellenius

Hunter and Davisson (1969) wrote a pioneering paper that brought the presence of residual force and its consequence for pile load-transfer to the attention of the profession. The paper presented observations at the 1963 Lock and Dam 4 project of the Corps of Engineers, where, for one of the first times, strain-gage instrumentation was used in static-loading tests. The tests combined results from compression (push) tests with those of subsequent tension (pull) tests and presented an innovative analysis linking the results of compression and tension tests to determine the true load-transfer of the pile. The analysis established that driven piles are left with locked-in force-distribution—residual force—and that this force affected the evaluation of records from an instrumented static loading test. While the concluding recommendation that static loading tests should combine push and pull tests and the piles should be instrumented in order for the true load-transfer mechanism be determined was not that often followed by the profession, the paper certainly established the importance of the residual force. This paper adds additional insight by reanalyzing the original test records in terms of effective stress, as opposed to stress-independent method of the old times, and of pile movement as opposed to "capacity".

Oct 31, 2023

By Karen Dawson, Patricia Bennett

Designers and constructors of King County’s $275M Georgetown Wet Weather Treatment Station located in Seattle, WA, overcame classical Puget Sound Lowland geotechnical challenges to provide treatment of 70 MGD of combined sewer overflows (CSOs), provide 1.2 MG of CSO storage, and convey the treated effluent 1,600 ft to a new outfall in the Lower Duwamish Waterway. The site is underlain by over 200 ft of very soft to dense deltaic deposits with moderately high compressibility, low strength, and is susceptible to seismically-induced liquefaction. The industrial history of the area made contamination a consideration for deep foundation selection and restrictions on construction methods. This paper describes some of the key aspects of the project, including a water-holding structure able to tolerate more-thancommonly-accepted settlement by utilizing a robust reinforced concrete slab and relatively short rigid inclusions combined with load distribution mat, settlement monitoring and water preloading prior to constructing grade-sensitive features. Case history information is presented for construction of a nominal 100 ft diameter, 92 ft deep secant pile intake pumping station/equalization basin which utilized a 32 ft thick tremie seal to reduce construction dewatering risks.

Oct 31, 2023

By Vijaya Rao Parigela, Jason Redgers, Bushra Khan

Ground Improvement was required for adoptable roads profile below the designated Rights of Way as part of infrastructure and streetscape works for an urban development project over an area of 500,000 m2 in the Emirate of Abu Dhabi in United Arab Emirates, UAE. The site is heterogenous with low-lying coastal profiles consisting of marine and wind-blown aeolian deposits followed by medium to stiff silty and clayey deposits and mudstone causing unacceptable settlements in the past to roads and associated structures. Exacting specifications from client and consultant included various requirements in terms of achieving bearing capacity, overall stiffness of ground, friction angle, relative density, and mitigation of any liquefaction risk for site based on local codes and standards. As such an extensive soil investigation campaign comprising of Cone Penetration Testing, CPTs carried out to ascertain individual CPT profile each representing an equivalent area of 2,000 Sq.m. Critical part was the site characterization which in this case, soil classification according to Robertson, 2012 was utilized. Thus, ground improvement scheme was prepared using High Energy Impact Compaction, HEIC (depth < 2.5m), Rapid Impact Compaction, RIC (depth < 4m) and Dynamic Compaction, DC (depth < 8m) as required to meet the compaction criteria in conjunction with the general contractor. Post compaction Cone Penetration Tests, CPTs and load tests were further evaluated to demonstrate performance. Overall works included predesign, execution and post testing and design verification to show compliance to specification in line with contract requirements.

Oct 31, 2023

By Christopher Stouffer, Stefanos Papadopulos, Siobhan O'Reilly-Shah, Pedro Espinosa

Treasure Island is located in the center of San Francisco Bay, between the active San Andreas and Hayward faults. Treasure Island was constructed in 1930s at the site of the Yerba Buena Shoals, a shallow-water area directly north of Yerba Buena Island, a natural island. It was constructed from sand fill dredged from the surrounding shoals, placed within perimeter rock dikes. The first phase of the Treasure Island redevelopment included (i) geotechnical ground improvement for 40 acres of land, 3,000 feet of shoreline, and a causeway that connects Treasure Island to Yerba Buena Island, (ii) construction of new infrastructure, (iii) preparation of building pads for mid-rise and high-rise buildings, and (iv) construction of a new transit hub with a ferry terminal, ferry pier, floats, and a breakwater A comprehensive geotechnical investigation was conducted to evaluate the ferry terminal site seismic and geotechnical hazards and provide foundation solutions for the near-shore and off-shore structures. The main geotechnical hazards include the presence of soft marine soils, strong seismic shaking, seismically induced soil liquefaction and lateral spreading, seismic shoreline instability, and kinematic loading on off-shore deep foundations. Deep foundations of the ferry pier, floats, and breakwater were designed to carry kinematic loads due to lateral spreading of the liquefiable offshore soil layers and for the effects of the soft marine deposits. In addition, the design of the ferry terminal at the shoreline included the evaluation of seismic stability of the ferry terminal abutment founded in an area that received deep soil mixing ground improvement. This paper details the geotechnical evaluations and mitigations for the various ferry terminal improvements.

Oct 31, 2023

By Cary E. Ronan, Tyler Toledo, Justin Ray

The Oyster Point development is located near the San Francisco Bay margins in South San Francisco, just north of the San Francisco International Airport. The eastern peninsula of Oyster Point was formerly operated as a municipal landfill from about 1956 until it stopped accepting waste in 1970. The Oyster Point Landfill is currently being redeveloped in phases, in cooperation with the City of South San Francisco, as a combination of public open space, life science campus (laboratory/research facilities, amenities buildings, parking garage), and a hotel. This paper focuses on Phases 1 and 2 of the life science campus development. The site conditions vary drastically across the site with a portion of the site underlain by shallow bedrock and a portion of the site underlain by up to 40 feet of municipal refuse over 50 feet of soft, compressible clay (Bay Mud) and up to 80 feet of alluvial deposits, with bedrock at a depth of about 150 feet. The varying subsurface conditions below the planned buildings led to a foundation system consisting of a combination of shallow and deep foundations. Deep foundations consist of driven steel HP-piles for Phase 1 and augered cast-in-place (ACIP) piles for Phase 2. Because of a steeply sloping site, over 20 feet of fill was placed in some areas to create a level building pad, resulting in over 5 feet of long-term estimated settlement. This paper will discuss the challenges and lessons learned during redevelopment of the Oyster Point Landfill. Specifically, we will discuss the design of piles and utilities to account for longterm settlement and corrosion, pile load test results, and interpretation of load test data. We will also compare and contrast the use of steel HP-piles and ACIP piles installed for building support through the landfill within Phases 1 and 2 of the development.

Oct 31, 2023

By Erich Steinlechner, Freddy Lopez, Guido Maier

Due to the high damage potential that a possible flood event has for the densely populated areas along the 26 km-long “International Stream” of the alpine Rhine, the discharge capacity needs to be expanded from the current 3100 m³/s (100-year flood) to 4300 m3/s (300-year flood), in line with the requirements of the Swiss-Austrian project RHESI – Flood Control for the Rhine Valley. In this context, the existing 255m-long Rhine Bridge connecting the Austrian towns of Fussach and Hard is no longer able to ensure the primary framework conditions for flood protection and needed to be replaced by a new structure. The new Rhine Bridge Fussach-Hard, a state-of-the-art steel composite bridge with a separated rope construction, was designed to meet the new requirements for flood protection as well as to satisfy the increasing volume of traffic. The extremely unfavorable subsoil conditions, consisting of shallow, very soft to soft plastic lacustrine clay deposits, required a deep foundation solution for the substructure (abutments and piers). Due to the high flood risk, the construction of the substructure could only be carried out during a period of low water discharge (winter), resulting in a very tight construction schedule (winter half-year 2020/2021). For the deep foundation of the substructure, several options were evaluated. Finally, a solution consisting of pile grillages, executed with ductile cast-iron driven piles (320 mm of diameter), was adopted for the project. The fast, safe and simple execution of the piles allowed for the successful erection of the substructure within the limited available time frame. The completion of this construction stage was critical for the further phases. After a construction time of only 28 months, the Rhine Bridge Fussach-Hard was officially opened for traffic on November 18, 2022. The following technical paper presents an overview of the adopted deep foundation solution, focusing mainly on the design and execution of the piled foundation. Furthermore, additional topics such as the sustainability of the adopted solution and possible optimization measures will be discussed.

Oct 31, 2023