Search Documents

By Chan Min Yoo, Kiseong Hyeong, Inah Seo

INTRODUCTION One of the major concerns for deep seabed mining is its environmental impact, from the disturbance of benthic communities due to the mining activity to the disposal of mine tailings back to the ocean. Yet a significant amount of waste materials would be produced from the on-deck processing on the mining platform, all the materials that produced on the mining platform are to be shipped to the land unless the related regulation and guidelines are developed by IMO and ISA (ISA, 2018). Still, ecotoxicology data for the deep seabed minerals from case studies in deep-sea tailings disposal (DSTD) and submarine tailings disposal (STD) sites are lacking and all other related aspects are also largely unknown. This year, the Republic of Korea has started a research project for the more comprehensive understanding of chemical and physical properties of mine tailings from the on-deck processing and the possible environmental impacts on the marine organisms after its disposal. Based on the scientific data collected from this project, Korea would be able to make recommendations for the methods and technical standards for the deep seabed mining discharges. The subjects of this project are threefold: to understand the physical/chemical properties of the tailings, to model the dispersion of particulates after the disposal, and to assess its impact on the marine ecology. Laboratory Experiments Producing Mine Tailings First, the possible waste materials are produced by mimicking the collecting and dressing processes at sea. The polymetallic nodules (PN) would be mined by using a collector lifting the crushed nodules out of the bottom sediment, and the bottom water, accompanying sediment, and the fine nodule particles which are too small to be recovered would be discharged to the ocean and thus are considered as tailings (Schriever and Thiel, 2013). In the laboratory, PN is crushed into the fragments smaller than 2 cm, abraded in the water using the rock mill, and then sieved to obtain the fine particles to be disposed.

Jan 1, 2018

By Jeremy Spearman, Mark Lee, Jon Taylor, Neil Crossouard, Bramley Murton

"SUMMARYThis paper describes challenges faced when executing a programme of monitoring to measure the dynamics of currents and sediment plumes at a seamount and the solutions identified to deliver the measurements. The study site was the Tropic Seamount, which extends some 3300m above the surrounding seabed and is found at the southern limit of the Canary Island Seamount Province. The purpose of the study, which forms part of the Marine E-tech project, was to provide information on the interaction of flows with the seamount and to assess the behaviour of sediment plumes that could be generated from potential seabed mining operations targeting the recovery of ferromanganese crusts. Since the crest of the seamount is submerged to a depth of 1000m, much of the work was undertaken using remotely operated and autonomous vehicles supported by measurements from the surface vessel. Despite only limited information on currents being available for planning purposes, the combination of short term forecasting using a 3-dimesional hydrodynamic model of the study area coupled with the collection and analysis of reconnaissance data collected during the first phase of measurement activities made it possible to plan and execute a number of detailed hydrodynamic experiments on the seamount crest. The results of these experiments have advanced the understanding of the behaviour of sediment plumes in the deep ocean and will ultimately improve our ability to manage the impacts which may arise from deep sea mining operations."

Jan 1, 2017

By Thomas Kuhn

Germany?s industry heavily depends on the continuous import of mineral commodities such as manganese, copper, nickel, and molybdenum. Due to the strong increase in metal prices since 2002 Germany?s federal geological survey, the Bundesanstalt für Geowissenschaften und Rohstoffe (Federal Institute for Geosciences and Natural Resources, hereafter called BGR) applied for a license area for the exploration of deep-sea manganese nodules in the Pacific manganese nodule belt between the Clarion and Clipperton fracture zones. A 75,000 km2 covering license area was eventually granted to the BGR by the International Seabed Authority (ISA) in 2006. It is separated into two parts: ?W1? (17,000 km2) and ?E1? (58,000 km2; Fig. 1). The BGR obtained initial information on the abundance and grade of nodules in the license area from samples collected during three cruises with R/V Valdivia and one cruise with R/V Sonne between 1976 and 1978 (Rühlemann et al., 2009). Since the accuracy of navigational data obtained during these cruises is outdated and sample coverage is unevenly distributed and sparse in many parts of the license area, BGR has started a new exploration program to investigate the German license area according to the rules, regulations and procedures issued by the ISA for the exploration of Mn nodules in the Area.

Jan 1, 2010

By Matthew Kowalczyk, Steve Bloomer, Peter Kowalczyk

"Mineral deposits found near seafloor hydrothermal venting are of great economic interest. Valuable metals such as gold, copper, zinc, and other polymetallic sulfides are found in appreciable grades in seafloor massive sulfide (SMS) deposits associated with these vents. For mapping these deposits, electromagnetic prospecting is one geophysical method that is very useful because copper/gold rich deposits are highly conductive.Ocean Floor Geophysics (OFG) in 2008 developed the first EM system to successfully map the limits of conductive mineralization in a survey at the Solwara 1 deposit (Kowalczyk, 2008). Since then, towed coincident loop time domain systems have been developed by Waseda University (Nakayama and Saito, 2016) and have successfully detected known mineralization buried at 30m depth. Using a deep tow controlled source electromagnetic (CSEM) array, very clear anomalies have been measured (Murton, 2017) over known mineralization at the TAG field on the mid-Atlantic ridge.In 2014 and 2015, OFG partnered with Fukada Salvage and Marine Co. Ltd. and the Scripps Institution of Oceanography to map methane hydrate deposits off the coast of Japan using a towed controlled source electromagnetic (CSEM) system developed by Scripps. These hydrate deposits are resistive targets, and the Scripps system successfully mapped subsurface electrical resistivity distributions to depths of several 100 metres below the seafloor. OFG is attempting to extend the Scripps CSEM technology to map subsurface conductive SMS deposits to a similar range of depths below the seafloor."

Jan 1, 2017

By M. C. I. Modenesi, J. E. Smith, M. Salvá-Ramírez, G. M. Castro, J. C. Santamarina

Annual metal consumption per capita has increased several orders of magnitude worldwide since the turn of the 19th century, yet grades of terrestrial ores are decreasing as reserves dwindle. Consequently, deep sea metal deposits are gradually transitioning from identified resources to economically viable reserves. Deposits in the Red Sea deeps along the axial trough result from tectonic and local hydrothermal processes. Continental rifting and ocean floor spreading produce fresh oceanic crust; concurrently, seafloor evaporites flow into the spreading zone and form isolated deeps. The deeps are often filled with hot stratified brines maintained by locally discharged fluids during hydrothermal circulation. Metalliferous sediments precipitate from the brines within the deeps. The ongoing multipronged study at KAUST involves: (1) acoustic characterization of the metalliferous accumulations using advanced signal processing techniques that capture the physics of granular materials; (2) comprehensive mineralogical and textural characterization of sampled sediments using SEM, EDS, XRD, XRF, and ICP-OES; (3) multiphysics instruments deployed to measure undisturbed sediment properties in-situ; (4) development of a distributed seafloor observatory for monitoring field operations; (5) innovative concentration and separation technologies; and (6) new strategies for proper tailings disposal purposely conceived for the unique field conditions in the Red Sea deeps.

Jan 1, 2018

By Igor E. Mikhaltsev

This paper concerns the continuation of work on the deepwater non-oxygen cycle heat energy generating systems. The 25-kW prototype of a universal deepwater turbine-electric energy source with hydrazine-hydrate as the primary heat production chemical is described in short and its abilities are discussed. The ?hydrazine-hydrate 64? is a catalytically dissociated heat production chemical (H2H4 ? nH2O) with 36% of water. The system was designed for work in any depths of the ocean down to 6000 m. It was built and tested working in the testing chamber in the ambient hydrostatic pressure of 600 bar. Then it was tested in the autonomous programmed regime in the Atlantic Ocean. The privileges of that energy system for any bottom installations or moving devices designed for ocean mining which need high power energy sources (20-100 kW and more) are discussed. The important needed step forward is raising the efficiency of the system which needs some investigation work in known directions. It is supposed that the possibility of getting about 5 kg/kWh with improved battery charging possibilities could be achieved. This might make the system even more profitable for mining operations.

Jan 1, 2001

By John Parianos

"Seafloor mining provides significant potential economic benefits for many Pacific nations that may be “land poor” but “coastline rich,” meaning they have the potential to utilize and profit from the mineral wealth within their Exclusive Economic Zones that extend 200 nautical miles (360 km) out from their coastlines. Within international waters, mineral wealth is the “Common Heritage of Mankind” with additional benefits for sponsoring states and their people.The Solwara 1 Project build continues with significant progress over the last twelve months. The Seafloor Production Tools (SPTs), Subsea Slurry Lift Pump, riser pipe, launch and recovery systems and winches are now complete with delivery to test facilities and the vessel ongoing. Recent focus has been on submerged trials for the SPTs, but the vessel build continues to progress to schedule. Nautilus appreciates the great support thus far from our all our stakeholders.Our focus is to develop the world's first commercial high grade seafloor copper-gold project in an environmentally and socially responsible manner and to launch the deepwater seafloor resource production industry.Nautilus’s marine research continues, including a 3.5-month series of exploration cruises for Seafloor Massive Sulphides in the Bismarck Sea, as well as fabrication of purpose designed exploration equipment."

Jan 1, 2017

By Seung-Kyu Son, Michael T. Chandler, Youngtak Ko, Gyuha Hwang

Over the past decade, sea-floor hydrothermal vent fields have been studied by many researchers because of their commercial potential of mineral resources and the origins of Earth’s life. Approximately 300 of these are reported as massive sulfide deposits near the mid-ocean ridge, most of which are located in the Atlantic and Pacific ridges. However, only fourteen deposits have been identified in the Indian mid-ocean ridges. The Central Indian Ridge (CIR) between 8°S and 12°S is composed of three segments with a slow full- spreading rate of 33-37 mm/yr. The hydrothermal activity at the slow-spreading center can be generated along the ridge axis attended by volcanism or along the tectonic features, such as oceanic core complexes (OCCs). OCC is an exposed mantle rocks composed of peridotite and ultramafic rocks uplifted through long-lived detachment fault processes which can also lead to extensive hydrothermal circulation near the slow-spreading center. Therefore, the identification of OCC’s properties will be an important indicator for finding the sea-floor hydrothermal vents. To study hydrothermal activity of the CIR, Korea Institute of Ocean Science and Technology (KIOST) have conducted expeditions using R/V Onnuri over four years (2009-2011, 2017). High-resolution bathymetry and backscatter data was obtained during expeditions using multibeam echo system of EM120 in 2009-2011 and deep-tow side-scan sonar system of IMI-30, which has more higher resolution than EM120, in 2017. In this study, we use these high-quality data for constraining location and size of OCC. We also analyze the geophysical and morphotectonic characteristics of OCC gathering high-resolution bathymetric map and backscatter image.

Jan 1, 2018

By James R. Hein

Barite and Fe-Mn-oxide deposits that occur along faults in the Southern California Borderland formed by low-temperature hydrothermal processes. The Borderland region consists of block-faulted continental crust within the broad transform boundary of the North American plate. The fault-bounded basins are anoxic and partially filled with hemipelagic and turbidite sediments. Barite was collected from four dredges and a submersible dive (DSV4-355) in the southern California Borderland, and was collected from two sea-cliff sites along the Palos Verdes Headlands near Los Angeles. Barite at these seven locations occurs along strike-slip and basin-margin faults from the shoreline to 1800 m water depth. Submersible observations showed a series of mounds up to 10-m high composed of friable, white barite associated with diffusely venting milky fluid; the mounds support large benthic colonies, including tube worms (Lonsdale, 1979). Barite samples recovered from dredges are brown, green, and white and range from porous, vuggy fragments to massive fragments cut by banded barite veins. Samples from two dredge sites contain fossil worm tubes 1-3 mm in diameter and >10 cm long. All the samples are nearly pure barite, with only minor to trace amounts of other minerals. Chemical analyses show 94-98 wt. % BaSO4, low total rare-earth element (REE) contents (<45 ppm), Sr contents from <2 to 10,000 ppm, and Hg contents up to 1 ppm. Chondrite and shale-normalized REE patterns show light REE enrichments and large positive Eu anomalies. These REE pattern characteristics are typical of marine hydrothermal fluids and minerals. Sulfur isotope ratios (d34SCTD) from +21.6 to +67.4? range from seawater values (+21?) to exceptionally high positive values. Strontium isotope ratios are lower than the modern seawater ratio as well as the seawater ratio that existed at the time of deposition of the host rocks.

Jan 1, 2002

By Steve Potter

"REVIEW OF ISA's DRAFT EXPLOITATION REGULATIONS – HAVE KEY STAKEHOLDERS' CONCERNS BEEN ADDRESSED ADEQUATELY?In early August 2017, the ISA published a revised draft of the exploitation regulations. My presentation will focus on the extent to which key State and Contractor issues raised in formal submissions in November 2016 have been addressed in the revised draft and any additional key issues in the revised draft which are likely to cause significant concern for Contractors.ABSTRACTFollowing the ISA's call for submissions in response to draft zero of the exploitation regulations in July 2016, 43 responses from stakeholders were received by the ISA in November 2016. My presentation will start by briefly looking at how the ISA has continued to engage with stakeholders following the publication of draft zero of the exploitation regulations, including at payment regime workshops in London (November 2016) and Singapore (April 2017) and at the environmental workshop held in Berlin in March 2017. It will also touch on the publication in February 2017 of what was in effect a very preliminary draft of the environmental regulations before moving on to consider in detail the extent to which key State and Contractor issues have been addressed in the ISA revised draft exploitation regulations which were published in August 2017. My review of the formal submissions will include, amongst other things, commentary on:(i) the level of Stakeholder response (State Parties to UNCLOS, Sponsoring States, Privately owned Contractors, State Owned Contractors and NGOs);(ii) the quality of the submissions (particularly by States and Contractors); (iii) the key concerns raised by State and Contractor stakeholders and how those issues have been addressed in the revised draft exploitation regulations; and(iv) how all stakeholders need to further engage with the ISA to ensure that the exploitation code adequately addresses the legitimate and reasonable concerns of each Stakeholder group (e.g. Contractors, Sponsoring States, Developing States and NGOs)."

Jan 1, 2017

By Virginie Tilot

Recommendations have been drafted following an international multidisciplinary panel discussion organized at UNESCO/IOC by the Académie des Sciences d?Outre-Mer on 15 December 2010 conveyed, according to its mandate, to the French government and to an international pool of scientists and stakeholders. These take into consideration the relevant Provisions of the United Nations Convention on the Law of the Sea of 10 December 1982, the Rio ?Earth Summit? Convention of Biological Diversity of 5 June 1992 as well as the activities and recommendations implemented for the world?s oceans and seas, in particular by the International Seabed Authority (ISA) and the recent reports and scientific works (including those implemented by the ISA Kaplan, Ifremer, COI-Unesco). The recommendations integrate, for one of the ecosystems, the conclusions of the project of the conclusions of an IOC-UNESCO / Government of Flanders project (2004-2010) implemented by Dr. V. Tilot from 2004 to 2010, during which were published three volumes describing the referential state of the polymetallic nodule ecosystem and proposing options for the management and conservation of the nodule ecosystem in the Clarion Clipperton Fracture Zone, NE Pacific Ocean: http://unesdoc.unesco.org/images/0014/001495/149556f.pdf, http://unesdoc.unesco.org/images/0014/001495/149556e.pdf; http://unesdoc.unesco.org/images/0014/001495/149556e.pdf#223

Jan 1, 2011

By Derek Ellis

There are two environmental issues which have only recently begun to need planning in detail for marine mining. One is the environmental consequences of mine closure; the other is environmental terrorism. In principle it is not difficult to predict the pattern and rate of biodiversity recovery after mine closure on metalliferous depositional seabeds. 1-5 years to a self-sustaining community of organisms is a generalized guideline, depending on depth and particulate composition. The rate and pattern of biodiversity recovery on some metalliferous hard-rock habitats is far less predictable due to the patchiness and rareness of the habitat. Ecoterrorism at mines, whether on-land or marine, is now to be expected. A good example of resource industry ecoterrorism is the fire-bombing of logging and cement trucks in Oregon in 2001. But there have also been bombs at mine sites, as at Asbestos, Quebec. It is also possible to regard some resource-loss lawsuits as frivolous, hence forms of ecoharassment. Marine mining operations should take note of the development of environmental terrorism (and terrorism in general) and its various manifestations and impacts. Potentially these range from minor work stoppage inconveniences, to serious financial risk jeopardizing the economics of a mine, to jail for company executives, managers and environmental staff, and to harassment and killing of mine personnel.

Jan 1, 2005

By Leonhard Weixler, Peter Platzek

The Company Bauer Maschinen is very well known in the field of specialist foundation equipment. In the diaphragm wall market, we have experiences both in manufacturing and executing projects all over the world since 1984. We have a population of more than 300 units working all over the world in all climate and soil conditions. Especially for hard soil and rock conditions, we have developed several cutting tools and systems to optimize the performance, e. g. the “flipper tooth” Besides the execution of land based foundation projects, we have performed our firs offshore project with the trench cutter in 1994. Our task was to take samples out of the alluvial soil off the coast of Namibia in a water depth of max. 200 m. We converted a drill vessel and launched the cutter thru the moon pool. The samples had a cross section of 3,40 m² and a max. depth of 5 m. They were used to estimate the content of diamonds. The first time, we reached the seabed of the deep sea was together with our seafloor exploration rig MeBo, where we can take cores up to a length of 160 m in a maximum water depth of 4000 m. With our customer MARUM, we have done several expeditions since 2005. The last expedition took place in the Black Sea to explore gas hydrates.

Jan 1, 2018

By Leonhard Weixler, Peter Platzek

The Company Bauer Maschinen is very well known in the field of specialist foundation equipment. In the diaphragm wall market, we have experiences both in manufacturing and executing projects all over the world since 1984. We have a population of more than 300 units working all over the world in all climate and soil conditions. Especially for hard soil and rock conditions, we have developed several cutting tools and systems to optimize the performance, e. g. the “flipper tooth” Besides the execution of land based foundation projects, we have performed our firs offshore project with the trench cutter in 1994. Our task was to take samples out of the alluvial soil off the coast of Namibia in a water depth of max. 200 m. We converted a drill vessel and launched the cutter thru the moon pool. The samples had a cross section of 3,40 m² and a max. depth of 5 m. They were used to estimate the content of diamonds. The first time, we reached the seabed of the deep sea was together with our seafloor exploration rig MeBo, where we can take cores up to a length of 160 m in a maximum water depth of 4000 m. With our customer MARUM, we have done several expeditions since 2005. The last expedition took place in the Black Sea to explore gas hydrates.

Jan 1, 2018

By C. L. Mardock

The U. S. Bureau of Mines participated in a two-year joint State of Oregon/Department of Interior Placer Task Force study on the economic and environmental aspects of Oregon&apos;s marine placer deposits. The effort culminated in a research cruise off the southwest coast of Oregon to investigate the geological and biological characteristics of the continental shelf deposits. The Bureau&apos;s role was to collect and study the placer material off the continental shelf and to determine its strategic potential and significance. In-depth characterization of the sediments by optical and electron microscopy verify that the placer material from Cape Blanco contains up to 3 pct ilmenite, 0.5 pct chromite, and small amounts of zircon and gold. However, harsh sea conditions and equipment failures prevented sampling below a four-foot depth at the Cape Blanco site. Results to date indicate that the deposits sampled off the southwest coast of Oregon do not represent a significant source of strategic minerals. However, further study of the deeper sediments off Cape Blanco may uncover significant concentrations of chromite. This presentation encompasses the site geology, the geophysical and biological activities of the expedition, and the results of the Bureau&apos;s mineralogical and chemical investigation. The combined findings of the Bureau and other Task Force agencies have provided information needed to expand the country&apos;s limited knowledge of marine mineral resources and has assisted state and federal agencies in the formulation of offshore mineral policies.

Jan 1, 1991

By Carl H. Hobbs

The beach at the resort city of Virginia Beach, Virginia has been and increasingly will be dependent upon artificial nourishment for maintenance and for hurricane protection. Both existing base-level maintenance operations and planned substantial enhancement programs out strip the capabilities of traditional terrestrial resources to provide the required quantities of sand. Our research program, an amalgam of projects from several funding sources, has located and defined suitable quantities of beach quality sand for use on the city&apos;s beaches. The work also has furthered our understanding of the region&apos;s Quaternary history. Initially, reconnaissance level, high-resolution, sub-bottom profiles and surficial grab samples taken on the basis of sub- marine geomorphology identified two geographically and geologically separate areas worthy of further exploration. Further profiling supplemented with some cores further defined the potential sand reserves. The Sandbridge Shoal site is a large and discrete Holocene sandbody atop late Pleistocene strata. The sands in region offshore of the commercial area known as the Resort Strip appear to be recent fill within fluvial(?) channels cut into the older subsurface. Each of these resources is within roughly 5 km of major sites targeted for beach nourishment and/or hurricane protection and contains sand with appropriate geotechnical properties. Ongoing work will better define the dimensions and limits of the sand bodies and provide data to enable determinations to be made concerning exploitation. Ultimately decisions concerning the overall beach enhancement-hurricane protection projects will involve economic, environmental, technical, and social considerations.

Jan 1, 1995

By Alexander Malahoff

With its new continental shelf beyond the exclusive economic zone, New Zealand is a country with just 4% of its territory above water. The other 96% is submerged. New Zealand&apos;s marine territory covers an area about three-quarters the size of Australia. This territory includes large portions of the Gondwana continent from which NZ separated more than 80 million years ago. This underwater land mass extends from the shores of New Zealand to a water depth of more than 5,000 m, is largely unexplored and is almost certainly the site of many large, untapped oil, gas and mineral deposits. Underwater oil and gas drilling is now a universal activity. Underwater mining is in its infancy and will become a major activity in the future, contributing greatly to the New Zealand economy. New hydrocarbon deposits will undoubtedly be discovered under the ocean floor in regions such as the Great South Basin located off Canterbury and Otago. Mineral deposits are also undoubtedly located within the oceanic crust of this underwater NZ continent. These are as yet unknown and unexplored. The oceanic crust north of the North Island is currently being extended through the subduction of the Pacific plate into the Tonga Kermadec trench and through the growth of a line of submarine volcanoes extending north to Tonga. Active submarine volcanism has led to the growth of ocean floor mineral deposits consisting of polymetallic sulphides with iron, copper, zinc and lesser gold, silver and other metals.

Jan 1, 2011

By D. S. Cronan

Pitcairn Island, the last remaining British Colony in the Pacific Ocean, falls in the S.E. Pacific. Its location, on top of a hotspot volcano, suggests the presence of submarine hydrothermal deposits in its EEZ. Such environments are known to contain hydrothermal mineral deposits, as in the case of Loihi submarine volcano near Hawaii, and Macdonald and Teahitia-Mehitia seamounts in the South Pacific. The hydrothermal deposits in these areas are formed as a result of the interaction of seawater with hot volcanic rock, producing a hydrothermal fractionation sequence comprising sulphides of Fe, Cu and Zn, oxides and silicates of Fe and oxides of Mn. In 1988, a GLORIA survey from the RRS Charles Darwin confirmed the existence of recent volcanism within the Pitcairn Island EEZ. A later bathymetric and sampling survey by the FS Sonne of the region round Pitcaim Island revealed submarine volcanoes approximately 80 km ESE of the island. Hydrothermal mineral deposits were recovered from them, and comprise finely laminated crusts of Fe oxides containing up to 50% Fe, and laminated hydrothermal Mn crusts up to 5 cm thick. Both morphologically and chemically the latter are similar to those from mid-ocean ridge and island arc settings, containing up to 50% Mn, associated with sulphides, and represent first discovery of such deposits associated with mid-plate "hotspot" volcanoes. Massive sulphide deposits are thought to occur within the volcanic pile.

Jan 1, 1992

By Harald Brekke

On 13 July 2000, the ISA adopted the Regulations on Prospecting and Exploration for Polymetallic Nodules in the Area. The first contracts for such exploration were issued by the ISA the same year. The duration of exploration contracts is 15 years, after which the contractors are expected to go into exploitation. In 2013, ISA with the LTC initiated the process for developing the regulations for exploitation, and are currently working on the first draft to put forward for the Council. In the meantime, the first seven exploration contracts have expired, and been given five years extensions in order for the contractors to get ready to apply for exploitation contracts. According to the current draft of the exploitation regulations, an application for an exploitation contract shall be accompanied by all data acquired during the exploration phase, a mining plan, a financing plan, and a set of environmental plans (i.e. an environmental impact statement, an emergency response and contingency plan, environmental management and monitoring plan, and a closure plan). All of these plans have to be based on substantial scientific and technical data and information. The mining plan requires geoscientific data regarding the mineralogy and grade of the nodules, and the physiography of the mining site as a basis for the consideration of critical aspects, inter alia for making reliable resource estimations, design the mining operations, and forecast revenues. The environmental plans require the input of a substantial set of bioscientific data and information on the exploitation technology in order to establish base-lines, and monitor and evaluate the effects of the mining operations. Under the exploration contracts, such scientific data have been acquired and reported on an annual basis to the ISA. Some testing of mining equipment and experiments on the extraction of metals have also been performed by some contractors. These scientific and technical data from the exploration phase will be the basis for the for the preparation of the studies, plans and documents required for the applications for exploitation. No time frame is specified for the preparations of an application but it must be assumed to take place before the expiration of the exploration contract.

Jan 1, 2018

By P. Halbach

Hydrothermal activity is well known from many locations on most mid-ocean ridges, but no hydrothermally mineralized area had yet been found at the ultraslow spreading southwest Indian Ridge up to October 98 when the Japanese RV Yokosuka with the submersible Shinkai 6500 investigated this area. A massive sulfide field was discovered near 27°51S / 63°56E in the 11th segment west of the Rodriguez Triple Junction. The Free University of Berlin had joined this cruise and taken over the responsibility for the study of the respective sulfide mineralizations. Hydrothermal minerals were sampled during two dives at a water depth of 2940 m close to the summit of an axial volcanic ridge called Mount Jourdanne. Massive sulfides occur on the seafloor as small smooth mounds with an average area of about 5 m2. Their surfaces are weathered and have a reddish to brownish colour. In addition to these mound-like structures, small tube-like chimneys were observed; these chimneys rise approximately 30 to 40 cm above the floor and are less than 10 cm in diameter. No indications of hydrothermal fauna could be detected. All the hydrothermal features are spatially related to faults and smaller fissures controlled by an E-W trending graben system crossing the summit region of the submarine volcano. Such tectonized areas are generally considered to be ideal for hydrothermal activity because they may have both a magmatic heat source in the deeper underground as well as pathways for the fluid circulation.

Jan 1, 2002