Search Documents

By H. M. Zoerb

Based on the belief that operating details are a definite contributing factor to major economies, this paper traces the development of crushing cavity design in Symons cone crushers to attain maximum liner utilization. Wear rates are analyzed and compared in this presentation and drawings illustrate succeeding design changes.

Jan 6, 1953

By Clement K. Chase, F. Milton Lewis, Roshan B. Bhappu

Abstract-In this paper an attempt has been made to review the cost trends in producing copper by conventional milling, smelting and hydrometallurgical means during the last five years. The primary objectives of this cost analysis are to provide a base for future projections as well as to indicate which cost items are more volatile in their influence on overall cost of producing copper.

Jan 4, 1978

(Under this heading will be published notes sent to the Secretary of the Institute by members or other persons introduced by members.) Mining engineer and geologist. Member. 29 years old. Married. Seven years' experience in Lake Superior iron district; two as superintendent of extensive exploration in new fields. Capable of handling all details of the exploration and development of new properties. Available now. No. 431.

Jan 2, 1918

Mr. Address - Member is hereby proposed by 'the undersigned, as a Associate Junior Member of the American Institute of Mining Engineers. Signature of three Members or Associates (not Junior Members). Place of birth Year of birth Education, when, where and how acquired, with degrees, if any. A technical education is not requisite for membership. Dates . . Please give record of experience on following page with dates; for example, in the form used by "Who's Who In America" and similar publications.

Jan 2, 1918

[JAMES A. BARR Consulting Engineer Mt. Pleasant, Tennessee Washington, D.C. BEHRE DOLBEAR & COMPANY Consulting Mining Engineers and Geologists 11 Broadway New York 4, N. Y. BLANDFORD C. BURGESS Registered Professional Engineer Mining Consultant Montieello, Georgia GLENVILLE A. COLLINS Mining Engineer Uranium examinations Cable "Coins" 210 La Arcada Bldg. Santa Barbara, Calif.]

Jan 1, 1952

By R. W. Raymond

Jan 1, 1902

By Stephen Krickovic

As it is commonly understood in the bituminous coal mining industry, pillaring means removal, as completely as is practical, of all pillars formed in the development of headings and rooms on first mining. The degree to which this can be accomplished, termed percent of recovery, is of course dependent generally upon the physical conditions of the bottom and the overburden, the system of min-

Jan 2, 1955

By Guy R. Johnson

It is now generally acknowledged that the successful management of a modern foundry necessarily embraces a knowledge of chemistry, and especially a thorough acquaintance with the effect of the various metalloids on cast-iron, in order to

Jan 1, 1897

University of Alabama University, Alabama Mining and Metallurgical 'Society JOHN MADDOCK, President WAYNE WEST, Secretary J. R. CUDWORTH, Faculty Sponsor RICHARD L. BOWRON, Counselor University of Arizona Tucson, Arizona - Miners' Society CLYDE LOVING, President THEODORE BROOKs, Secretary A. J. THOMPSON, Faculty Sponsor E. D. GARDNER, Counselor,,

Jan 1, 1941

By John D. Morgan

THE tense international situation prevailing in the postwar period, and the outbreak of actual hostilities in Korea, directs attention to the status of United States reserves of strategic and critical materials for war. Geologists and mining and metallurgical engineers are particularly interested in this problem, since, with a few important exceptions, almost all of the materials on the official list of strategic and critical materials for stockpiling (see top of page) are metals and minerals.

Jan 3, 1951

By Clarence M. Haight

The general practice in drill sharpening shops, of which descriptions have been written, is about as follows: The bit is heated to 1600" to 1900°F. Then when forged to the proper shape and size in the sharpening machine, the steel is allowed to cool; it is then passed to a hardening furnace where only the end is heated to about 1450" F., and then quenched in cold water, brine, or in brine with oil on top.

Jan 1, 1922

ENGINEERS AVAILABLE (Under this heading will be published notes sent to the Secretary of the Institute by members or other persons.) Recent graduate desires position as surveyor or assistant to mining geologist. No. 112. Member, technical graduate with varied experience covering milling, cyaniding, plant design, mill and dam construction, underground work, and executive, examination and reporting on mining properties, desires position as superintendent of gold and silver property in United States or Latin America. No. 113.

Jan 7, 1914

THE Institute conducts jointly with the American Society of Civil Engineers, American Society of Mechanical Engineers and American Institute of Electrical Engineers, certain activities as listed below, and is joint owner with them of certain properties situated at 29 W. 39th St. in New York.

Jan 1, 1946

For the benefit of those of our members who are considerable holders of securities, but owing to their isolated situations are not in close touch with the metropolitan market and current quotations, we are publishing two very interesting graphs, showing the course of the bond and stock markets in New York over a long period. These graphs are furnished through the courtesy of the financial department of the New York Tribune.

Jan 6, 1919

By Charles L. Elliot

Data for mining applications of geophysical activity in the Free World in 1963 has been collected by the Committee for Geophysical Activity of the Society of Exploration Geophysicists. This information has been made available to the AIME and is published here in abstract form with the kind permission of the SEG. The data is based or1 244 responses (51%) to the questionnaires circulated among 475 worldwide organizations engaged in mining geophysical operations and or research. It is believed that the data is a realistic appraisal of actual world geophysical activity.

Jan 8, 1964

Scraper and Slide Riddell Mucker Boskovich Device Hydro-mucker Inclined Shaft Mucking The Benching Method Performance Chart

Jan 3, 1950

F. N. SPELLER (communication to the Secretary*).-It would certainly be interesting to know more about the heat balance in this practice, but there seems to be no doubt that the net result is a greater absorption of heat where roll scale is used instead of solid metal scrap. In the experimental heats referred to, about an equal weight of pig iron or steel scrap was replaced by roll scale. This caused a reduction of about one-third in the time of blow compared with a heat of the same

Jan 6, 1917

By Lawrence Adler

MINE hoist ropes have hitherto been selected by successive approximation, a process both tedious and inexact. The proposed expression is a readily solved synthesis of existing data and the following standard equation:1 [ ] For convenience, a glossary of all terms appears on page 564. Since rope weight (Wr) and bending load (B) are functions of unit rope weight (Wo), which in turn is a function of rope strength (T), W, and B can be expressed in terms of T. Wr as a Function of T: A study of the curve in Fig. 1, unit rope weight vs strength, yields Eq. 2:

Jan 5, 1957

By E. J. Schmitz

This trip, beginning at Springfield, August 12, 1897, and ending at the same place fourteen days later, extended south and southeast through Christian, Ozark and Taney counties,

Jan 1, 1899

By Thomas V. Falkie, Robert Stefanko

Higher education is in serious trouble in the United States. With increasing costs threatening to create a taxpayer's revolt, serious thought must be given to determining whether or not we can continue to afford our present educational policies. Disinterested students with little aptitude are pushed into over- crowded universities by well-meaning parents, but they lack real objectives beyond achieving that great status symbol-the degree. Advanced degrees are heaped upon the baccalaureate degree, and the pursuit of the pure and social sciences continues at the expense of engineering and technology.

Jan 1, 1971