Search Documents

By D. Kump

Barrick closed the Bullfrog Operation in November 1999.During its life, the Bullfrog produced ore from three open pit mines and an underground mine; 32,000,000 tons of ore were processed at the 9,000-ton per day oxide mill. The mill tailings were deposited in a 320-acre tailings impoundment. When operations ceased, an estimated 750,000,000 gallons of water remained to be removed from the tailings impoundment. During operation, the drain down water from the tailings impoundment was pumped back to the mill for reuse; since closure of the mill, the drain down water has been managed by a combination of passive and forced evaporation.

Jan 1, 2004

By T. Zoltai

Asbestos is a generic term for industrially useful fibers recovered from exploitable deposits of the asbestiform varieties of five silicate minerals: chrysotile, anthophyl-lite, actinolite-tremolite, cummingtorute-grunerite, and rie-beekite. Asbestos and asbestiform fibers of some other minerals are known to be carcinogenic. Minerals crystallized in the asbestiform habit-are characterized by unique properties (morphology, strength and flexibility, physical and chemical durability, and defect-free surface structures). The key to the unusual properties, and health effects, of asbestiform fibers appears to be in their unusual surface structure. In contrast, non-asbestiform crystals of the same minerals, including the five so called asbestos minerals, do not have these properties and are not carcinogenic.

Jan 1, 1989

By Jim Johnson

The purpose of this paper is to summarize and discuss a variety of site specific conditions which are typically evaluated as part of the engineering design process for heap leach pads, solution control ponds, and associated facilities. The following sections will focus primarily on the topographic, climatologic, hydrologic, and geotechnical evaluations critical to selection of heap leach sites, and selection of a preferred heap leach configuration or method. Other important considerations in the design of a heap leach project, including evaluation of ore properties and leachability, pregnant solution processing requirements, spent ore neutralization/disposal requirements, and other anticipated reclamation requirements are beyond the scope of this paper are not addressed in any detail.

Jan 1, 1998

By J. Jeremy Burden, Bruce S. Brown

A major question in the design and permitting of a tailings storage facility is the quality and quantity of seepage which will occur from the base of the tailings facility into the underlying foundation and groundwater regime. A corollary to this is what liner system, if any, is necessary to protect the groundwater regime from unacceptable contamination. Modern tailings storage facilities are generally designed as drained tailings deposits whereby all free water is removed from the facility by decant, drainage and evaporation. This removes the source of on­going seepage and allows for efficient and timely reclamation of the facilities. Quantifying the residual seepage from the base of the tailings deposit is complicated due to the following factors:

Jan 1, 1992

By C. H. Bucknam, A. M. Raichur, M. Misra

Simultaneous dissolution of mercury along with gold occurs during cyanidation of gold ores. A method has been found for the efficient removal of mercury from the gold cyanide solution by treating with dithiocarbamates which form stable compounds with mercury. The mercury concentration in the leach solution can be brought down to low levels by adopting this treatment. Furthermore, it is also possible to stabilize the mercury in the ore heap itself by addition of this reagent so that mercury does not dissolve in the cyanide solution during heap leaching. Only trace amounts of mercury were detected in the pregnant solution obtained from a heap treated with dithiocarbamates. In this paper, process parameters are discussed in detail.

Jan 1, 1997

By James H. Lammers

Over the years, the chemical processing industries have con­tinued to move from batch to continuous processing in order to obtain better quality control, simpler designs, and often reduced capital and operating costs. One exception to this trend has been the carbon elution circuits in the gold industry. Although some successes have been achieved on a pilot scale, no continuous elu­tion circuit using Anglo American Research Laboratory (AARL) methods has ever been used on a commercial scale until now. This paper describes the continuous elution circuit which was recently commissioned at a major gold project. The paper also presents the economic justification for the selection of the process over conventional batch technology.

Jan 1, 1998

By Bruce W. Cavender

There is a tendency for managers of mining companies to regard the performance of a process plant as essen­tially fixed, with only incremental improvements to be realized by optimizing individual unit operations. However, a number of op­erations management methods are available that will substantially improve plant performance, through both productivity increases and cost reductions. Known collectively as "world-class manufac­turing" techniques, these include total quality control, just-in-time production and inventory management, the systematic develop­ment of innovative plant practices, and progressive management accounting and business control systems. The implementation of these techniques by plant managers and operators will enable the plant's performance to exceed levels that are currently believed to be maximized.

Jan 1, 1993

By J. H. Heintz

This paper discusses the law as it relates to appraising operational mining properties in the context of a takings claim. Topics include the need for valuation expertise, the differences between de jure and de facto takings, an overview of the law of condemnation, including jurisdictional issues, and defining your strategic options according to the controlling statute. State condemnation law varies by jurisdiction and just compensation can be calculated by comparable sales unit-times-price, before ¬after-valuation, capitalization of income and discounted cash flow methods. Takings under Federal laws are reviewed, as is the necessity of assembling a team including attorneys, valuation experts including a mineral appraiser, a real estate appraiser, economists and geologists.

Jan 1, 2002

By William R. Bond, Jim V. Rouse, Laura L. Damon

As noted by Damon (1990), "The time that a heap (of gold ore) is on the reusable leach pad is of critical economic importance." The Interim Neutralization Study, conducted by Brohm Mining Corporation (Brohm), at the request of the South Dakota Department of Water and Natural Resources and reported by Damon indicated that improvements could be made in leaching and pointed out the need for a better understanding of the gold ore leach procedures. To provide data on an actual heap, personnel from Brohm and GEOCHEM installed a series of pressure/vacuum lysimeters in an active Brohm heap, and conducted subsequent testwork to evaluate the efficiency of leaching. The objectives of the testwork included efforts to:

Jan 1, 1992

By R. Z. Pyrih

Pressure/ ,acuum lysimeters were used to instrument column tests containing several lifts of tailings slurry, and to sample pore water as the tailings lifts dried. The results of the column testwork demonstrated that air oxidation of sulfide minerals associated wilh the tailings residue neutralized the alkalinity of the tailings pore water. Neutralization of the alkaline pH volatilized cyanide which, in turn, destabilized copper-cyanide complexes and caused the precipitation of insoluble copper from solution. Analyses of pore water samples for microbial activity indicated high plate counts. The presence of viable microorganisms in the pore water implied that degradation of cyanide was enhanced by growth and activity of cyanide-consuming microorganisms in the tailings material.

Jan 1, 1991

By Michael Brittan

For several years, Independence Mining Co. (IMC) has routinely used oxygen fluid-bed roasting to pre-oxidize refractory gold ores ahead of conventional carbon-in-leach (CIL) processing. Oxygen serves jointly as the fluidizing medium and the combustion gas. This technology has proven to be reliable, environmentally sound and cost-effective. IMC is a subsidiary of the Minorco group. The company operates the Jerritt Canyon (a joint venture with FMC Gold) and Big Springs gold mines in the Independence mountain range north of Elko, NV. Ore bodies in the range contain characteristic refractory ore. It requires pre-oxidation ahead of conventional CIL processing. This article describes the technology developed specifically to treat these difficult ores.

Jan 1, 1995

By P. M. Lin, P. Tsang, S. S. Peng

This paper presents an overall stabilization method to eliminate the potential of reoccurrence of subsidence over abandoned mine lands (AML). The method considers column grouting at specific locations, including the destressed and stress concentration zones, instead of grouting around and beneath damaged structures. The latter method is currently commonly used for AML subsidence abatement. The finite element method (FEM) can be used to calculate stress distribution in the strata before and after grouting. A grouting pattern is generated that includes the location and number of grouting holes. Stress concentration can be reduced or eliminated. A comparative analysis, including the number of grouting holes, area of grouting influence, stress level and potential of subsidence reoccurrence, is also presented.

Jan 1, 1993

By R. H. Grau

The National Institute for Occupational Safety and Health's Pittsburgh Research Laboratory is now involved in research to identify silica dust generation in underground metal/nonmetal mines. The ultimate goal of this research is to develop control technologies to reduce worker exposure to respirable silica dust. Commodities and job classifications with the highest silica dust exposure have been identified through analysis of the Mine Safety and Health Administration's compliance dust-sampling database. Dust surveys were conducted in an underground limestone and gold mine to investigate silica dust sources, generation levels and the controls being used. A summary of the mining operations, sampling procedures, resulting data and suggested methods to improve dust control are provided.

Jan 1, 2003

By Daniel W. Kappes

The 1.8 million tonne Itos tailings deposit is the result of sever­al years of processing by Comibol of the San Jose and ltos Mine ores at Oruro Bolivia. The historic flowsheet consisted of a flotation circuit in which silver-bearing galena and stibnite were concentrated. Approximately half the silver in the ore was not recovered, and the existing tailings contain slightly over 200 grams silver per tonne, in the form of complex sulfides of silver, antimony, lead, and other metals coating grains of pyrite. An extensive laboratory program was conducted to exam­ine conventional processing l)lethods such as cyanide leaching and regrinding followed by flotation. However, the silver-bear­ing sulfides are in intimate contact with the pyrite and the pyrite comprises 30% of the total tailings weight. Cyanide leaching recovers only 40% of the silver and the cyanide consumption is uneconomically high. Flotation produces an upgraded, but still uneconomic, concentrate. For this reason, chloride leaching had been evaluated by Comibol, and in the mid 1980's Comibol undertook an innova­tive test consisting of two 300 tonne field heap leaches using a cold chloride solution. The tests were partially successful, but could not be applied to the bulk of the tailings which are already ground to 50% minus 200 mesh. In 1992, Kappes, Cassiday & Associates undertook to develop a hot agitated chloride leach flowsheet, and is current­ly constructing a treatment plant under a turnkey contract from a Bolivian company, Baremsa, S.A. Using this process, 85% of the remaining silver can be recovered, with significant by-prod­uct credits from antimony and lead. The project features hot, agitated acidic chloride leaching, filtration, crystallization of lead chloride, and precipitation of metals using iron scrap. Arsenic is removed from the precipitate by caustic leaching, and minor metals by furnace refining. Antimony is recovered as the oxide by cupelation, and silver is poured as <lore from the cupel. Production rate will be 600 tonnes per day. Startup is scheduled for late 1995.

Jan 1, 1996

By Ajay Mahajan, Manoj Mohanty, Vishal Gupta

Modern coal processing plants utilize multiple cleaning circuits to efficiently beneficiate different size coal fractions of run-of-mine coal. An older plant optimization approach is to maintain average product quality from individual cleaning circuits at the same level as the given product specifications for the overall plant. However, many past studies indicate that the equalization of product quality approach fails to produce the maximum plant-yield. A newer approach, known as equalization of incremental product quality, requires that the incremental product quality obtained from each circuit be maintained at the same level to satisfy the overall plant product quality. This approach ensures the maximization of plant yield while satisfying a single product quality constraint. However, while dealing with multiple product quality constraints, this approach by itself may not be sufficient to obtain the desired maximum yield. For the simple reason that the dirtiest particle (or group of particles) with respect to one quality constraint may not be the same particle (or group of particles) with respect to another quality constraint, the mass yield versus product quality relationship generated by equalizing different incremental product quality may not be exactly the same. Therefore, an additional search technique has to be utilized to determine the global-maximum value of plant yield. Thus, the main objective of this study was to utilize an emerging optimization technique, known as genetic algorithms (GA) to maximize plant yield while satisfying multiple product quality constraints. The maximum plant yield obtained from this approach was nearly same as the maximum yield obtained by the incremental product quality approach while satisfying one specific product quality constraint. The GA was applied on a coal preparation plant that utilizes four circuit operations - heavy medium bath, heavy medium cyclone, spiral and froth flotation. The results showed that using GA as an optimization process gives 2.56% higher yield that will result in additional revenue generation of $5,120,000 per annum than average product quality approach.

Jan 1, 2005

By William M. Schafer

Mining projects which contain sulfide mineralization face increasing regulatory hurdles due to environmental concerns over acid rock drainage (ARD) and the ability of long-term reclamation to protect water quality. Among regulatory agencies, much of the perception about sulfide projects has been based on conditions at historic mining sites at which little or no effort was made to control ARD. With proper design measures, ARD production can be greatly reduced or eliminated. The science of ARD prediction and control must be expanded to enable mine planners to anticipate the effect of various facility design options on ARD potential. Some common-sense examples of geochemical prediction techniques and mitigation measures for waste rock dumps, spent ore heaps, and mine pits are described.

Jan 1, 1992

By Robert Stauffer, John Frostiak, Rein Raudsepp

Placer Dome's Campbell Red Lake Mine in Balmertown, Ontario produces a refractory gold flotation concentrate containing the sulphide minerals arsenopyrite, pyrite and pyrrhotite. In 1991, the existing concentrate roasters will be replaced with a pressure oxidation plant based on Sherritt Gordon technology to update the facilities and to satisfy environmental requirements. A successful continuous pressure oxidation miniplant program was conducted by Sherrill Gordon in late 1989 which formed the basis for the design of the commercial plant. The paper summarizes the Campbell operation and the environmental aspects of the project, and discusses the results of the miniplant program and the design of the commercial plant. The capital cost of the pressure oxidation plant and the process operating costs are also presented.

Jan 1, 1990

By K. G. Tan

Widely available silver and arsenic bearing concentrates can be smelted to produce a discardable slag, a base metal speiss, and a crude silver button which is easily separated from the other phases after solidification. This paper discusses the development of a novel process as an alternative to existing nitric acid leach methods for the production of high purity silver from the raw silver button. Direct electro-refining of the raw silver anode in a sulphate medium is integrated with downstream purification and recycling modules that are customized to allow efficient recovery of silver and saleable by­products. The test results, flowsheet alternatives and process details are presented and discussed in terms of overall technical feasibility, economical viability and environmental compliance considerations.

Jan 1, 1999

By Andreas Rubo, Stephen Gos

In the days of increasing environmental and safety awareness many efforts have been made to prevent losses of both an evident economic nature and also less obvious losses. These losses could be associated with damages due to negative impact on the environment and also people coming into contact in a broader sense with any toxic chemical. This paper deals with how cyanide can be applied in a responsible manner at a modern gold mine. Responsible application is achieved by minimizing losses of reagent and avoiding negative impact on the environment as well as adopting a Responsible Care philosophy to the application of cyanide. It becomes evident that this is quite a complex system with a greater commitment than avoiding reagent losses for economic purposes.

Jan 1, 1997

By Ron VanRiper, Ben W. Burdett, Randy A. Ynchausti, Jeff D. McKay, Dan Lampshire, Thomas W. Toronto

An adaptive process control system was installed in Cortez Gold Mines Mill #2 Grinding Plant in Nevada. The installation, commissioning, and testing of the system took approximately 80 manweeks, but final test results show that the system paid for itself through increased throughput within two weeks of commissioning. Both crisp and fuzzy rules are used in the expert rule base which is also integrated with continually adapting neural network models. The expert rules and models are used by predictors, and optimizers to allow the control system to provide optimum process performance under continually varying feed conditions. The selection, installation, rule and predictor configuration, and statistically verifiable testing of the control system in the Cortez Gold Mines Mill #2 Grinding Plant is described in the paper.

Jan 1, 1999