Search Documents

Jan 1, 1977

Jan 1, 1988

Jan 1, 1935

By David Scrymgeour

All low cost coal has been mined. Engineers are searching for a safe and effective way to mine coal seams' deep within the earth. The most modern of these is the RL, an acronym for Robotic Labor. Mining robots are programmed to do specific jobs but can think on their own during an emergency. MR's, or mining robots, usually have a same basic shape. A torso is mounted on treads. Designers chose treads because it gives the robot a great deal of mobility. The torso has two arms. One arm is equipped with a human hand. The other has a human-like hand. Mining is done underground. A small robot goes around punching holes in the coal. A small charge is inserted in the hole. The MR ignites the charge with his laser. It explodes after three minutes. The MR returns to the station where his battery is recharged. Mobile cement barricades are moved between the blasting area and other working MR's. After the charge explodes the barricades are moved to another area. The MR returns and cuts the coal chunks into pieces. Another robot comes and loads the coal and carries it to the loading bin. From there it is taken to the surface where it is weighed and shipped. The whole process was done by robots. Humans just supervise but help in an emergency or malfunction.

Jan 1, 1987

By Thomas Collier

MR. PRESIDENT AND CO-WORKERS IN THE COAL INDUSTRY: I was requested by our president to prepare a paper on Longwall Coal Mining, to be read before this honorable organization. There are three general systems of Longwall, Longwall advancing and Longwall retreating, and the Nottingham system which is worked in England and South Wales. In Fremont county, where I am employed, the Colorado Fuel and Iron Company are working their mines on the advancing system. The face is started generally from the bottom of the shaft or other mine opening, or, at the outside of the pillar left to support the shaft or slope-bottom and advances toward the boundary of coal area. As the roads in this system are maintained by pack walls, it is sometimes called gob-roads system, and by these means the mine is opened up rapidly and consequently early returns are secured from the capital invested. By this method, there is no expense for narrow work, and a minimum amount of timbering of the roads is required. Now what I call ideal Longwall work is where there is about eight inches of dirt mining-and four and one-half feet of coal, .and when the entries and rooms will gob themselves, so that there will be no rock or dirt to haul out to the surface. But this is not the case in the mine I am in charge of. The entries and rooms will not gob themselves, therefor we have to haul the rock and dirt to the surface, which runs up the cost of production. Now the ideal roof in Longwall is composed of tough elastic and pliable strata that yield gradually by bending when the coal is removed, and throwing a sufficient weight or roof pressure on the coal face to break the coal when the same has been mined or undercut. Timbering should be done systematically, the coal well spragged before the miner starts to undermine the coal. Cogs or cribs are alright in their place, but I am not a believer in crib in Longwall working because they are too strong for the roof and do not leave the roof to squeeze .down gradually and break the roof around the crib. Longwall work requires particular skill on the part of the miner, and a familiarity with the conditions affecting room and pillar work, and a good room and pillar mail may not be successful in. Longwall work. A good Longwall miner realizes more than any one else the importance of being regularly at his place every working day. A day lost causes his place to fall behind the others which makes his work harder, and his daily output is further reduced by the amount of small coal that is liable to result from the excessive pressure where the face falls behind. The bad results are also felt by the miner working on each side of such place, as the roof pressure is often insufficient and the coal does not break as well as when the face is kept in a uniform line.

Jan 1, 1921

By T. H. Butler

The two most talked of questions in the mining industry today are rock dusting and mechanical loading. The one as a matter of safety, and the other as a matter of economy, and both are of vital interest to the mining fraternity. Rock dusting and other safety methods will be dealt with by others at this meeting, so I will confine my few remarks to the matter of mechanical loading. I will not attempt to tell you what mechanical loaders are doing in the different mining fields throughout the country, or what they should do, but will endeavor to give you an outline of the work being done with mechanical loaders in No. 4 Mine of the Union Pacific Coal Company, at Hanna, Wye. In order that you may better understand and be in a position to follow me it will be necessary to cite the conditions under which we are working. and the type of loaders in use. The seam pitches from 14 to 17 degrees, and is normally 32 feet in thickness, and is overlaid with a soft sandstone roof. The panel system of working is used, planes being driven on the pitch, and rooms driven on the strike. Owing to faults being encountered planes are driven between the faults, and the. rooms on either side are in some instances 800 to 1,000 feet in depth. Rooms are advanced eight feet in height, and 32 feet in width, by hand loaders and .Toy mechanical loaders, and when driven to the boundary,, 18 feet of the remaining 24 is loaded out with Thew electric shovels, and six feet left to protect the roof. In January, 1916 the company installed a Type 1 Thew shovel, equipped with a 1 1/4-yard dipper, and in July, 1917, they installed a Type 0 Thew electric shovel, equipped with a 1-yard dipper, and in the year 1918 two additional Type 0 Thew shovels, equipped with a 1-yard dipper, were installed, making a total of four Thew shovels for this mine. The introduction of these shovels caused the employees much concern, and like all departures from the old methods of mining, met with indifference by some and open antagonism by others, so that for some time they results obtained were not satisfactory. However, by constant supervision and changes in the method of haulage the results obtained at present, while not entirely satisfactory, are much better and the production and costs are reasonably good. The Thew shovels in use are mounted on traction wheels with swivel axle and move. in all directions by their own power, and while the weight of each is approxi¬mately 20 tons, they are not as cumbersome as. one would think and are easily operated. The system used in working these shovels is to shoot the coal clown ahead of the shovels and maintain two tracks, two cars being used on each track so that shovel is loading on one track while driver is, changing cars on the other. When place is finished the shovel is run back to the first cross-cut by its own power and lowered to the next room with block and tackle, the roof coal in cross-cut being shot down to a height of 16 feet to allow passage of the boom. With better results from the Thew shovels we soon realized that it was necessary to find some method of developing rooms faster than was being done with hand loaders in order to keep the Thew shovels in working places, and in November, 1923, the company purchased from the Joy Machine Company two Type 4 B U Joy loaders, and the installation of same met with the same indifference and antagonism from the employees as did the Thew

Jan 1, 1924

Kenneth M. Payne RMCMI PRESIDENT 1994-1995 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 91st Regular Meeting and Convention to be held June 25 thru 27, 1995 Crested Butte, Colorado

Jan 1, 1994

Jan 1, 1962

By Jerry M. Eyster

The Bush Administration is committed to reducing emissions from existing power plants Candidate George W. Bush said: The key to reducing emissions from older power plants on the federal level is to cap emissions on a level that makes sense?. And harness the power of the market place and provide economic incentives to produce better environmental results. I would want to make sure that any program we pursue does not result in excessive and unnecessary increases in electric bills.

Jan 1, 2002

Jan 1, 1928

H. C. GLAZE: There is no question in my mind that the day of direct current distribution is practically ended so far as large coal properties are concerned. Another thing that Mr. Drennan touched on that is of the utmost importance, is that of voltage-voltage to the various pieces of equipment inside the mine. You all know how expensive it is to have motors in operation in important places where the voltage .is about half that which the motor should have. This is particularly true in the direct current system. It slows down production, causes burnouts and destruction to apparatus, and is a question that you men have got to go into. It costs a great deal of money, as Mr. Drennan pointed out, to take care of this. The wires are large and cumbersome, while; on the other hand, with an alternating current system you can use a minimum amount of wire. We have installed this class of equipment with so-called "pick-proof" cable of 2,200 volts down slopes, and I have never heard of any trouble whatsoever from this cause.

Jan 1, 1923

Jan 1, 1927

By NA N/A

Jan 1, 1931

Jan 1, 1938

Jan 1, 1990

David Wolach RMCI PRESIDENT 2001-2002 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 98th Regular Meeting and Convention to be held June 30 thru July 2, 2002 Breckenridge, Colorado

Jan 1, 2001

Jan 1, 1987

Jan 1, 1926

By Kraig R. Naasz

Jan 1, 2008

[ ] Thomas B. Egan RMCMI PRESIDENT 1996-1997 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 93rd Regular Meeting and Convention to be held June 28 thru July 1, 1997 Steamboat Springs, Colorado

Jan 1, 1996