Search Documents

By Hamilton LH, Campbell PB

Since fundamental research in applied coal petrography is carried out mostly on polished surfaces, backscattered electron microscopy is most applicable for studying coal in the SEM. By employing this technique coal macerals can be easily identified , and information on the relations between maceral groups, mineral matter and trace elements are highlighted by grey level contrasts. This type of information is valuable in coal technology and cannot by normally revealed by the light microscopy (e.g. the distribution of inherent mineral matter).

Jan 1, 1989

The Plant Control and Data Logging System for the Loy Yang Open Cut (LYOC) is part of a control and communications network designed to provide a high level of surveillance of open cut plant and facilitate the efficient co- ordination of operations and plant maintenance. The computer system selected utilises a central dual mini-computer and multiple microcomputer data transmission network ,linked to the plant controllers using distributed, microcomputer based remote data collectors or outstations. Several aspects of the computer system are outlined.

Jan 1, 1982

Mine planning for ore recovery by open stoping and pillar recovery is becoming more sophisticated, but there are basic operating constraints which must be imposed if this planning is to realise the production results on which the mine is dependant. The production reliability of an open stope is usually a high priority and common design problems can be identified. A range of practical considerations which should be considered at the mine planning stage are reviewed including equipment performance, blasting technology, ventilation requirements, development layouts, lead time, ground conditions, support, backfilling and ore recovery.

Jan 1, 1982

Deformation of the lithosphere by tectonic forces is investigated from both observational and theoretical standpoints. Global and regional geophysical data bases, coupled with the means for their rapid display and analysis, facilitate recognition of areas of the con- tinents and oceans where the response of the lithosphere to these deforming processes might fruitfully be studied. Gravity anomalies, from Seasat altimeter data and from land and shipboard measurements, provide critical infor- mation on the isostatic state of deformed lithosphere and therefore on its thermal and mechanical properties.

Jan 1, 1987

The competitiveness and future growth of the Australian mineral resources industry face a number of challenges. The paper addresses key factors likely to influence the attainment of high performance and continuous improvement including organisational leadership, management/employee relations, technology, safety, health and the environment. Business practices such as benchmarking, Total Quality Management and re-engineering to achieve process and performance improvements are commented on. Future success for the industry will largely hinge on global business skills, a sustained focus on Quality principles and achieving performance through people.

Jan 1, 1997

By Toffeg A. N, Abdul-Hameed I

More than 1000 Ian of seismic reflection data correlated to ten exploration wells along with geological, gravity and magnetic data are used to construct the subsurface structure, in particular the crystalline basement, along a corridor approximately 100 Ian wide that traverses central Iraq in SE-NW direction for a distance of about 500 km from Baghdad in the central part of Iraq to Dohuk near the Turkish border. This transect is one of few such transects that represents the Iraqi contribution to the Global Geoscience Transects (GGT) project. The transect crosses two out of three major tectonic elements of Iraq: the unfolded zone and the folded zone.

Jan 1, 1990

This paper suggests the models for determination the optimum life of machines on the basis of sum and difference of investment and maintenance costs. The economic-mathematical models are based on complex percentage method taking into account the time factor of referring cost. The following strategies of maintenance policy have been considered in machines repair: a strategy without investment, a strategy with continuous investment and a strategy with step-like investment. The effect of value of investment in repairing and time interval of investment on optimum machine exploitation life has also been considered. An illustrative example is presented.

Jan 1, 2003

Two recently published studies have considered whether and how robots, which have been designed for manufacturing applications, could find use in mining. The conclusions of both studies, if not identical, are compatible. Automation of mining activities will continue. Robots, at least in the short term, will have little application in mining. However, robotic concepts, both hardware and software, are of considerable relevance to mining automation, and can be anticipated to diffuse gradually into mine environments. The present paper is intended to convey the current state of thought on this subject to IFAC Symposium participants who may be unfamiliar with the referenced studies, and is not intended to report previously unpublished research.

Jan 1, 1985

By Troman L, Groutsch J. V

The Kwinana Nickel Refinery began operations in 1970 processing sulphide concentrates from Kambalda using the Sherritt Gordon pressure leach and hydrogen reduction process to produce nickel metal as powder and briquette. Over the years a number of changes have seen the refinery capacity increased from the original design capacity of 15 000 tpa nickel on an all concentrate feed to its current design capacity of 42 000 tpa nickel on an all matte feed. This paper outlines the changes in plant equipment and process for the most recent refinery expansion from 35 000 tpa to 42 000 tpa which have been implemented since 1992.

Jan 1, 1996

The design of drawpoints in caving and stoping mines has a significant impact on the productivity of the operation. Drawpoints must be designed to provide uniform drawdown and maximum recovery of the broken ore within the limits imposed by the dimensions of the stope, the stability of the pillars, the method of draw, material flow characteristics, etc. The design of drawpoints historically relied on the mining engineerÆs experience and intuition. However, in many operations, empirical analyses have also produced important information regarding design geometry. Factors that affect the sizing and spacing of drawpoints are discussed and guidelines are provided for their design in order to obtain maximum recovery of broken ore and reduce hang-ups.

Jan 1, 2000

Within the Ross River Basin, the following types of water were collected and analysed; 19 streams, 24 wells and bores together with 19 samples from the Ross River Dam. The waters were found to contain up to 269 ppm of silica and, although they meet the requirements for industry in all other respects, this extremely high figure means that two basic guidelines should be followed. All steam generation units, except those less than 150 psi should employ hot lime zeolite softening, demineralization or evaporation to remove silica. Cooling systems should only operate on a once through basis.

Jan 1, 1978

By Seedsman R

The fundamentals concepts of roof support are similar between coal mining, metal mining and tunnelling and yet there are different design approaches, different hardware, and different levels of site investigation. This should not be the case and this paper discusses the key geotechnical issues that should underlie all roof support design - the need to reinforce defects. A design method to build a beam in laminated rock under high horizontal stresses is presented. The method allows for changing rock strengths, defect properties and varying horizontal stresses. At one level the design can be implemented with design charts and tables. Lessons learnt during the implementation of the designs at 5 different mine sites are Discussed.

Jan 1, 1998

By Walker G. S, Sparrow G. J

Dissolution of S02 into water-acetone mixtures results in the formation of 2-hydroxy-2-propane sulphonic acid. The pH, or acid strength, of water-carbonyl-S02 mix- tures can be controlled by varying the concen- tration of the carbonyl compound or the rate at which S02 is added to the water-carbonyl mixture during a reaction. The ease with which the acid strength of these mixtures can be controlled means that they have significant potential for use as a selective lixiviant. We have used water-acetone-S02 mixtures to selectively dissolve phosphate minerals in Christmas Island and Duchess phosphate ores and also uranium minerals in Yeelirrie uranium ore and Olympic Dam copper concentrate.

Jan 1, 1987

By M Vavro, V Slivka, J èterba

In the course of the last ten years the development of the mining industry in the Czech Republic has been influenced by the pushing through of economic and ecological criteria. Due to this coal mining was ended in the whole series of the underground coal mines. These mines become the source of ecological and safety risks û methane leakage, surface deformation, etc. The way of solving of these problems is by stowing of underground spaces, and also surface fault basins with the help of mixtures produced from industrial wastes. The presupposition of this procedure is knowledge of prescriptions for production of the mixtures, and of the economic advantageousness of carrying out these activities. This contribution pays attention to the utilisation of power-gypsum as a raw material in the production of mining-construction materials.

Jan 1, 2003

By Warren R. P

When the original Mount Gunson joint venture, between CSR and United Uranium ceased operations in December 1971, an intensive ex- ploration campaign was launched to prospect for more ore in the Mount Gunson region. This campaign resulted in the discovery of the Cattle Grid deposit. A comprehensive sampling programme proved the existence of 4.6 million tonnes of ore, at a mean grade of 2.4% Cu, calculated at a 1.0% Cu cut-off. The planning and development programme that followed this discovery included not only the mining and metallurgical aspects of the exploration of the deposit, but also the en- vironmental aspects. Preliminary work included data collection with respect to meteorology, soil types, and existing flora and fauna.

Jan 1, 1976

Dragline performance drops considerably when chop-down and double handling of material is needed due to increasing overburden thick- ness or total pit depth. Beyond a certain pit depth the dragline needs support by a pre- stripping system in the upper portion of the overburden. In soft to medium hard ground the bucket wheel excavator can be used for pre- stripping, whereby several methods of material transport are investigated. Conveyor transport around the pit and dumping by stackers is the best solution from the technical point of view. Cross pit transport and dumping by means of a conveying bridge is the method with the lowest costs per volume moved. Cross pit transport by use of a beltwagon with overlong discharge boom is both, poor from the technical point of view and high in overall costs.

Jan 1, 1981

This paper addresses; land use, rehabilitation and the State/Federal regulatory process, in light of Australia signing various international conventions and agreements in the area of environmental protection. The conventions on biological diversity, climate change and the implications of the Rio and Agenda 21 declarations are examined. The implementation of these initiatives through the Inter-Governmental Agreement on the Environment, and through legistlative mechanisms at Federal and State level is explored.Particular attention is given to the biodiversity strategy in context of the need to integrate economic aspirations and environmental concerns as a basis for sustsainable development. The paper concludes with a brief comparison of the major approval processes in each State, relating to mining environmental issues.

Jan 1, 1992

In recent decades the awareness of environmental issues by the general public has developed at an accelerat- ing rate. This is the result of a number of factors including more scientific knowledge of environments and of the impacts of modern society upon them, higher levels of education, the opportunity for people to travel more, and the success of the various communication media in bringing in- formation to the communities of the world about such environmental crises or threats as the smogs of Los Angeles and London, the Torrey Canyon and Santa Barbara oilspills, Minamata disease in Japan, the spread of the Crown of Thorns starfish, the disposal of toxic industrial wastes into the Upper Rhine, the discovery of high mercury and zinc contents in marine foods in southern Australian waters, and the proposal to mine limestone at Precipitous Bluff in Tasmania.

Jan 1, 1975

Metal smelting is seeing a continual increase in intensity and throughput in recent years. This is done with increasing demand for cost/capital efficiency, higher recovery, and managed environmental impact, among other things. With the development of more intense smelting processes, the issues of refractory wear, mixing and separation of reacting phases and the nature of the reactions between them become more prominent. Understanding of interfacial phenomena is in growing need, in addition to knowledge of the bulk properties of equilibrium and transportation. The GKW CRC has a suite of projects aimed at developing various techniques and expertise to provide information of interfaces in metallurgical systems. This article illustrates some recent development in this area, particularly in studies of melt/refractory contacts, the determination of surface and interfacial tension of metal/slag/matte melts, modelling slag-metal mixing and studies of kinetics of the smelting reactions.

Jan 1, 2000

Aberfoyle sought to reduce Hellyer project development risk to a greater degree than usual. Consequently the ore reserves estimate and feasibility study were particularly comprehensive. A detailed ore reserve study was completed based on extensive drill core and underground sampling, large scale pilot plant work and a detailed feasibility study. Leading external consultants were used for advice on commercial matters which impact on ore reserves and to audit major technical conclusions, including the results from pilot plant work and the ore reserve estimate. Other project risks were diminished by negotiating a State agreement covering security of title, royalty formula and environmental management procedures, by obtaining sales contracts, and by analysing Hellyer's position on an industry cost curve. The task of financing the project was much simplified by the extent and quality of information available from the ore reserves estimate and feasibility study report.

Jan 1, 1990