Search Documents

The morning session opened at 9:00 a.m. and was presided over by Harold Levent., Manager Coal Activities, Cameron Engineers, Denver, Colorado. The first speaker was Dr. Joseph J. Yancik, Assistant Director-Mining, Bureau of Mines, U.S. Department of the Interior, Washington. D.C. Subject-"Coal Mining R&D Programs of the Bureau of Mines." (See index for printed text of Dr. Yancik's paper.) Joseph J. Yancik is Assistant Director - Mining for the Bureau of Mines, U.S. Department of the Interior, Washington, D.C. He is responsible for the Bureau's research programs in mining. Principal programs are the coal and metal mining health and safety research, mining extraction and excavation, tunnelling, explosives, mined land reclamation, mine fires and mine waste disposal. He administers these programs through four research centers and through outside contracts and grants.

Jan 1, 1974

Jan 1, 1981

By P. F. Patterson

It is a well established fact that 60 per cent of all accidents in coal mines occur from falls of roof and coal at or in the proximity of the working face. Notwithstanding that this is well known, and has been frequently discussed by mining men, this seems to be the irreducible minimum. It is even said by those in a position to know that the percentage stated is increasing. With this, information before us it would seem that not enough attention is being given to close supervision at the working face, and until this is done we may expect to continue experiencing an increase in the accidents in this area. No workman generally feels that it is more important to finish loading a car of coal than to set a timber for protection, and many accidents happen from this source, not from a lack of knowledge of the dangerous conditions existing, but negligence in taking remedies necessary to remove the danger. It is true that nearly all state laws require the mine foreman or his assistant to visit each working face every day, but with the constantly changing conditions on account of the advance of the working faces, these daily visits may be entirely inadequate to discover possible dangers and prevent accidents. The obvious remedy then is closer and more systematic inspection and supervision of the working faces. Many accidents are caused in mines on account of not enough clearance between the rib and track or between timber and track. On all main haulage ways. there should be a space of at least 30 inches between the rib and track, or timber and track, and on all rooms not less than two feet should be left between the track and upright timbers.. A great deal has been said and written with regard to systematic timbering. We doubt very much the feasibility of adopting any standard of timbering that would be suitable for all roof conditions, and any such system in our opinion would not tend to cause a decrease in the number of accidents. The proper place to put up a prop, regardless of whether it conforms to any established system, is under a piece of loose roof. No habit is becoming more prevalent among miners and other mine workers than wearing gloves, principally flimsy canvas gloves, which afford no protection to the wearers and are the direct cause of many hand injuries. If gloves must be worn, and no doubt they will be as the habit has become well established, then they should be made from some heavy material and should fit the hands fairly snug.

Jan 1, 1923

The meeting was called to order in the Albany hotel, with the President, John B. Marks, in the chair. At the request of the Secretary, the chairman brought before the Institute the question of a reorganization of the finances and system of conducting the Institute, explaining that, although the Institute is in good financial shape and the meetings are of great interest and are attended by a large and serious minded membership, the Institute is getting so large and of such value to the operators that it should be taken over by the operators, conducted by some man elected by and from the operators, and its financing put on a definite basis. At present, it was explained, the Secretary, not a coal operator nor interested in operating, arranges and conducts all meetings and finances the Institute from three sources: the very low dues, the advertisements published in the Proceedings, and by direct solicitation of contributions among the supply and machinery houses. Mr. James Dalrymple spoke vigorously on the need of having the Institute entirely free from any taint of commercialism. Upon motion by W. D. Brennan, seconded, a committee of four, one to represent each State, was voted. Appointment of this Committee was deferred temporarily. The reading of the minutes of the previous meeting was then called for, but upon statement of the Secretary, that the minutes were published in Volume 2 of the 1925 Proceedings, they were dispensed with. The Secretary-Treasurer's report was made informally inasmuch as the last report had not yet been audited. In brief, the Secretary reported on a cost of approximately $1,600.00 a year to publish and send out the Proceedings, an expense of approximately $1,800.00 to care for the Denver meeting, and an expense of approximately $1,200.00 to care for the summer meeting. The Secretary's salary of $25.00 a month has not been collected, but a certain portion of this has been used for stenographic expense. The Secretary asked for expression from the floor regarding the advisability of continuing the publication on the present elaborate plan. Mr. Gibson, Mr. Marks, Mr. Whiteside, Mr. Littlejohn, Mr. Dick and others spoke positively on the value of the present form of the Proceedings, and urged that no changes be attempted in this. Upon motion of Holbrook Mahn, it was moved, seconded and carried that E. H. Weitzel and W. F. Murray be made life members of the Institute in recognition of their services in the organization of the Institute, placing them with Floyd W. Parsons as the original organizers of the Institute. Mr. Murray spoke briefly in acknowledgment of the courtesy. Mr. Weitzel's words are included in the discussion A letter was read from George B. Pryde relative to the present emblem of the Institute. Upon motion by Mr. C. W. Sinclair, seconded by Mr. Dalrymple, it was moved that the consideration of a new emblem be

Jan 1, 1926

Secretary's Apology: Although every effort was made to secure efficient stenographers, the railroad conditions at the time made it impossible to get stenographers from Salt Lake City. Practically all of the discussion was therefore lost, and the Secretary's apologies are offered to those whose names and remarks we are unable to record. 'We are indebted to R. Dawson Hall of Coal Age for what we have been able to print. The question was asked why belt conveyors are not more generally used. BENEDICT SHUBART: Belt conveyors lack the ruggedness of metal conveyors and require more accurate alignment. They are much used in England though comparatively scarce here. The H. C. Frick Company's belt installation at Colonial mine is an unusual installation for unusual purposes. It is hardly main haulage, but is more comparable to railroad transportation. The belts are in long sections,, nine hundred to twenty-three hundred feet, there are no particular grades, only two turns, and the immense tonnage handled justifies a quality of installation that at this day would not prove economical in most mines. EUGENE McAULIFFE, Union Pacific Coal Co., Omaha: Was much impressed on learning at the American Mining Congress that the Hudson Coal Company had mined last year 1,500.000 tons of coal from a 36-inch bed and had transported this coal to the mine cars by scrapers and conveyors. He did not believe that because one or two percent of the men around the mines were opposed to loading machines, that it should be said that the mine workers were inimical to such labor saving means. He believes that when duly explained to them they could see the advantages of the equipment offered and would be friendly to its introduction. The Sheridan-Wyoming Coal Company at Sheridan have eight Goodman Hydraulic loaders in operation in rooms .with Joy loaders driving the headings. It is not possible for the mines which had to pay high wages to compete with those whose wage scales were lower unless by the introduction of loading machines. He received a letter from Dr. L. E. Young of St. Louis, general manager of the Union Collieries Company, that his two Goodman Hydraulic machines were loading an average of three hundred tons each daily. THE SECRETARY: H. N. Taylor, president, Sheridan-Wyoming Coal Company, said Mr. Green of the American Federation of Labor told him he would have no trouble with Union Labor, and, if any local disturbances were created, they would be stopped. The Union nationally is with the introduction of labor saving equipment. J. B. FORRESTER, General Superintendent. United States Fuel Company, Hiawatha. In his opinion metal conveyors are preferred because they can be lengthened and shortened at pleasure, and so can be operated with greater flexibility than belt conveyors. W. C. HOLMAN, Chief Engineer. Phelps Dodge Corp: The Phelps Dodge Corporation have two Jeffrey belt conveyors in tandem which obviates brushing where the coal is low. MR. E. O. WIEDERANDERS, Jeffrey Mfg. Co.: Says he has seen belt conveyors in use in England and is much taken with the idea. MR. WM. MOORHEAD, Phelps Dodge Corp.: Our conveyors are in twenty-foot sections, each with a motor. Three of them tandem make a sixty-foot face. GENERAL: There was discussion regarding the size of the coal produced by conveyors. It was said that when the Gunn-Quealy Company started their operations, the coal was very large, but now there is not so much care taken to produce large coal as the market is now demanding smaller coal. The Secretary said that the use of conveyors at the Kemmerer Coal Company's mine had almost doubled the percentage of lump coal. Mr. McAuliffe questioned

Jan 1, 1925

By Thomas Foster

One of the most dreaded things which mining men sometimes have to contend with is underground mine fires, which are both dangerous and expensive. In the Reliance mines we have had considerable trouble with mine fires. We have at the present time five different fire zones, three of these zones give us considerable trouble and the other two have not given any trouble since they have been walled off. Fire Zone No. 1 comprises No. 2, 3 and 4 South Entries, about 50 acres are enclosed in this zone. Fire Zone No. 2 comprises the main drift entry from the mouth to the Old Boundary Plane and extends to the crop line, about 10 acres are enclosed in this zone. Fire Zone No. 3 comprises 1 and 2 North Entries from the main slope to the Old Boundary Plane, a distance of about 1,200 feet, about 15 acres are enclosed in this zone. Fire Zone No. 4 comprises 11/2 and 2 North Entries, a distance of 1,100 feet between New Slope and Old Boundary Plane, about 15 acres are enclosed in this zone. Fire Zone No. 5 comprises the inside end of No. 11/2 and 2 North Entries and 3 North Entry from the New Slope to 30 room, a distance of about 2,600 feet along No. 3 North Entry, about 20 acres are enclosed in this zone. The first mine fire started in No. 2 South Entry in No. 1 zone in 1914. Inside of No. 7 room on the high side of the entry, there was a soft piece of coal. There were no rooms driven in this coal and one day a fire was discovered in the solid pillar on the high side of the entry, work was started at once to load out this fire. and several places was driven into the pillar and cribs built where the coal was taken out, but this method proved a failure and a sand pack was put up along the entry between the track and the high rib. This consisted of timber set about 3 feet from the rib and 2-inch boards put behind the timber and sand or adobe put in between the boards and the ribs, and this method gave very good results except that it required close watching as the sand would settle and let the smoke out between the roof and the sand. Fire broke out in No. 3 South Entry in No. 1 zone in the summer of 1919. We sealed this fire off by building 36 fire stoppings, which also enclosed the fire in No. 2 South Entry and we have never had any trouble with fires in this zone since it was walled off. The fire started in No. 2 -zone in 1919 and has been very active ever since. When this fire was first discovered we built new stoppings in front of the old one in the room necks; we also opened up some of the room necks and loaded out part of the burning coal and rock but this did not help any, the fire, would burn out around the stoppings also burn along the roof between the top coal and the roof sometimes nearly across the entry. Several holes were drilled from the surface to the fire area and flushing the fire was tried but this was also a:\, failure, the rock above the coal was so hot that the mud would dry in the hole and fill it. In 1921 we started to take down the top coal along this entry, timber the entry and put 2-inch boards behind the timber and fill in between the coal and the boards with sand or adobe. We have at present over 1,000 feet of this work done and it has given us better results than any other method that we have tried. As the coal burns out behind the timber the weight breaks the timber and it is necessary to renew some of it. Fire broke out in No. 1 North Entry in No. 3 zone in 1922. There was a stopping in this entry that had been put in when the entry was finished some few years before. The fire burned around the stopping on the low rib of the entry, we built another stopping in front of the old one taking down the top coal and extending it up to the roof also digging in both ribs and setting the stoppings into the coal about 18 inches. This fire did not cause any trouble until June, 1924, when we discovered this fire was very active on the inside

Jan 1, 1924

Jan 1, 1923

Jan 1, 1982

Jan 1, 1986

Guessing or Knowing! Which? Bumps and Squeezes. Vertical Cutting. Mine Fires. Membership List.

Jan 1, 1924

Jan 1, 1925

Jan 1, 1924

[ ]

Jan 1, 1993

Jan 1, 1926

RMCMl PRESIDENT CHARLES W. MARGOLF on behalf of The RMCMI Board of Directors and Officers invites you and your family to attend The 81st Regular Meeting and Convention of The Rocky Mountain Coal Mining Institute to be held at Tamarron, Durango, Colorado JUNE 30, JULY 1 AND 2, 1985

Jan 1, 1984

Jan 1, 1926

The 1942 meeting will be held in Salt Lake City, June 10,11, and 12, at the Hotel Utah. ... If you have any suggestions for the program, send them to the Secretary at once.

Jan 1, 1941

[JOHN B. MARKS President Boston Bldg., Denver, Colorado BENEDICT SHUBART Secretary-Treasurer 521 Boston Bldg., Denver, Colorado H. H. BUBB Vice-President for Colorado Cokedale, Colorado W. J. REID Vice-President for Utah Wattis, Utah WM. MOORHEAD Vice-President for New Mexico Dawson, N. M. GOMER REESE Vice-President for Wyoming Frontier, Wyoming EXECUTIVE BOARD COLORADO: E. H. McCLEARY Alamo SAMUEL TESCHER Denver UTAH: DAVE BROWN :Storrs JOHN JENNINGS Hiawatha NEW MEXICO: JAS. McDOUGALL Van Houten GEO. MIKSCH Gallup WYOMING: T. H. BUTLER Hanna L. A. NORMAN Sheridan]

Jan 1, 1925

Jan 1, 1923

Thomas J. LIEN RMCMI PRESIDENT 1997-1998 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 94TH Regular Meeting and Convention to be held June 27 thru June 29, 1998 Snowmass Village, Colorado

Jan 1, 1997