Search Documents

Jan 1, 2001

of our good friends and fellow members: William D. Brennan Charles Beuchat who left the world better for their having lived in it.

Jan 1, 1931

[Abbott, Jay Union Supply Co., 5460 Colo. Blvd., Denver, Colo. 80022 Achziger, Ronald H Midwest Rubber Co., 6404 E. 39th Ave., Denver, Colo. 80207 Adams, Bob Energy Fuels Corp., Box G, Steamboat Sprlngs, Colo. 80477 Adams, David Empire Energy Corp., Box 68, Craig, Colorado 81625 Adams, Dell H Consolidation Coal Co., 3300 One Oliver Plaza, Pittsburgh, Pa. 15222 Adams, Douglas K General Electric Co., P.O. Box 2331, Denver, Colorado 80201 Adams, Kenneth L Arch Mineral Corp., 33 Carnation, Belleville, Ill. 62221 Ahlborg, William Joy Mfg. Co., 1911 Denver Club Bldg., 518-17th St., Denver, Colo. 80202 Albert, Darrell Safety Appliances Co., 400 Penn Center Blvd., Pittsburgh, Pa. 15235 Albrechtsen, Ray H Mountain States Resources Corp., 1399 So. 700 East, Suite 11, Salt Lake City, Utah 84105]

Jan 1, 1975

Jan 1, 2009

John Chrystal Richard R. Fenner G. D. Grayer Albert M. Keenan C. E. Osborn Stanley C. Shubart George Sumers Cal Witmer Death is not the end, but the beginning, Not the surrender of life, but of earth Not a time for tears ... but faith.

Jan 1, 1982

Profiled on these pages are the eight RMCMI 1996 Scholarship Award winners. All eight winners were present as guests of the Institute at the June convention in Durango, Colorado. Each received recognition at the Institute Awards Luncheon Monday, July 1. 1996. Each state vice president sewed as the host for the collegiate winner and his firm provided travel and hotel expenses. In addition to receiving a plaque from the Scholarship Chairman, Alan Czarnowsky, each winner receives $1,000 tuition credit for the coming academic year, as well as transportation hotel lodging and meals at convention as guests of the Institute. Because this is a continuing award, the winners from the previous year also receive a $1.000 tuition credit in their senior year if recommended by the dean of the college or university and are full time students. A resident from each of the eight RMCMI member states is selected from among Board approved institutions. Criteria for these awards to be made in the spring annually is that the recipient (1) Is a full time sophomore student who will use the tuition credit during the junior year. (2) Be both a U.S. citizen and a resident of the member state. (3) Maintain good academic standing, be pursuing a degree in a mining related field and have an expressed interest in western coal as a possible career path. The scholarship program includes curricula other than in the mining departments, but in engineering disciplines, such as geology, mineral processing and metallurgy. Contributions to this worthy project are tax deductible to each individual RMCMI member or his firm. Through annual donations of $100 or more, the Patrons of the Institute fund the scholarship program. A listing or current donors is found elsewhere in this book. Donations to this worthwhile program are payable to RMCMI Scholarship and may be mailed to the RMCMI Office, 3000 Youngfield Street, Suite 324, Lakewood, Colorado 80215. Profiles of the 1996 Scholarship Winners follow. [ ] ARIZONA WINNER Michelle Begaye New Mexico Tech - Socorro. New Mexico Michelle Lisa Begaye plans to work in a mine near her Navajo Reservation after graduation. She would like to continue teaching the young in her community as she has been doing for the past few years. As a volunteer with the Natani' Trails, she takes at-risk students on wilderness experiences such as rafting, repelling, etc. Active in school, she played the trombone, was in speech and drama, played softball, and was the first female to play football as a right and left tackle. A member of National Honor Society in High Shool, she also made the Dean's List at Navajo Community College. Michelle will pursue a degree in Environmental Engineering when she transfers to New Mexico Tech this fall. [ ] COLORADO WINNER Nicole Albert Colorado School of Mines - Golden. Colorado Nicole is pursuing a BS in Mining Engineering with a Minor in Mineral Economics - and has already proven her serious intent with her many activities related to mining. She is a member of the Society of Women Engineers; Society of Mining, Metallurgy and Exploration; and has participated in two different projects related to mining, one of which was to clean up a mine tailings site. Nicole enjoys hunting, camping, fishing, softball and horses. Growing up with her father, working at a surface coal mine, sparked her interest in this industry.

Jan 1, 1996

Please note all Proceedings of the Institute were taken verbatim by stenotypists from Hyatt & Associates of Denver and editing has been minimal. MR. MORTENSEN: On behalf of the Rocky Mountain Coal Mining Institute, I take great plea¬sure in saying good morning to you at Vail. With a few clouds in the sky, at least we won't get sunburned. We won't have to worry about our kids in the swimming pool, perhaps. It is delightful for me to have been able to have represented the Rocky Mountain Coal Mining Institute for the year 1982-1983. This has been our 71st year and this is our 79th meeting. In recognizing the attendance here, that dinner we had last night, and some of our entertainment must have gotten to some of us, or it is a little early. But I'm sure as the day goes on, and with the speakers outlined, it will be very beneficial for those who do attend. We do appreciate your attendance. I'd first like to make an introduction of our head table. Doris Finnie, she is our executive secretary. As most of you are aware, Gussie Whiteside retired as secretary. This will be the first time since the Institute started that there has not been a Whiteside present at one of our conventions. I'm sure Gussie would appreciate any calls or letters that any of you would care to make to her. Doris, I might add, has been a great help to me and all of the people who have been working on the program for the Institute this past year. There's been lots of reorganization and we are very pleased with Doris's ability to take hold from Gussie without any waves. Much credit must be given to you Doris for this and we do appreciate the help you have given us and believe me she has kept us out of trouble. Next, we have Art Neill. He is our vice president of the Institute from Montana and he also works with Western Energy Company. We appreciate the help that all of these session leaders and chairmen give to us. We have other names on the head table, but they will fill in as the morning goes on, so we won't bother you with any of those at this time. To set the stage for business, first I would like to call on Doris for a motion to approve the minutes of last year. MS. FINNIE: Thank you, Vernal. Mr. President, I suggest that the reading of the minutes be dispensed with and that the members refer to pages 9 through 80 of the Proceedings for the 78th regular meeting of RMCMI, as published MR. MORTENSEN: Thank you, Doris. Do we have a motion to so approve? MR. LINVILLE: I so move. MR. MORTENSEN: Loren Linville so approved. Do we have a second? MR. GARR: Second. MR. MORTENSEN: All in favor say aye. (Audience responded affirmatively.) MR. MORTENSEN: Those opposed? Hearing none, the motion is carried. I'm sure glad we didn't have to read those 80 pages. Is Doug Hammer in the audience? He was going to give us a list of new members of the Coal Institute and ask for your approval. But because of his absence, the names will be listed so that you can read them at a later date, I will entertain a motion that we approve the new members who have joined the Institute. Do I so have a motion? MR. BERNSTROM: I would make that motion. MR. GARR: I second. MR. MORTENSEN: Do we have any questions? All in favor¬ (Audience responded affirmatively.) MR. MORTENSEN: Any opposed? Hearing none, the motion is carried. Next, we'd like to proceeed with our Nominating committee report from the chairman, George Nugent, and the election of next year's officers. George, would you please take the stand? MR. NUGENT: Mr. President, and members of the Institute, your Nominating committee consists of five past presidents of the Rocky Mountain Coal Mining Institute. From Colorado Roy Coulson; from New Mexico, Bob Wilson; from Utah, Bob

Jan 1, 1983

By Steve Leer

Pick then introduced the convention keynote speaker, Steven Leer, President and Chief Executive Officer of Arch Coal. Following the morning coffee break, Pick introduced Howard Goodman to present the Fourth Annual Safety Awards. [ ]

Jan 1, 2001

By G. A. Knox

Mr. Chairman and Gentlemen: The subject assigned to me would cover a great many pages if it were gone into thoroughly. Therefore. I have just touched on a few of the most important points. I think that everyone engaged in the production of commercial coal understands all about its preparation, but I will set forth my views as to how I believe it is best accomplished. In order to produce the best prepared coal, your first attention should be to the miner at the working face. The most careful system of blasting should be adopted to avoid heavy charging of holes which results in the shattering of the coal. The lump, or any other screened sizes that may be screened from coal that has been improperly shot, are subject to greater degradation in transportation and handling, as well as reducing screened sizes, which results in dissatisfied customers in the first case, and lower realization in the latter.

Jan 1, 1928

BENEDICT SHUBART: I am rather surprised at one statement of Mr. McKeehan, that he found it satisfactory to bond only one track. It has always been my idea of good practice to bond both tracks and cross bond frequently, so that in case of any break in the bonding of one track, which frequently occurs, there will be no interruption in the circuit.

Jan 1, 1923

CHAIRMAN LITTLEJOHN: Some of the members will want to question Mr. Farnham on some of the things he has brought tip, so we will throw the meeting open for discussion. I am quite sure Mr. Farnham will be willing and glad to answer any questions that may be put to him. MR. HOLMAN: I would like to ask Mr. Farnham a question in regard to the Duckbill: How wide a face will it operate without moving the bill? MR. FARNHAM: The Duckbill is a device that was developed in the Union Pacific Mine at Rock Springs, within the last few months, and it is shaped something like, a dustpan, with discharge throat in the rear. They made one seven feet wide and found it was too wide, and the one they are using now is between three and four feet in width. The front section of the conveyor, which attaches to the duckbill, meshes into it to form a sliding section, and the front end of the Duckbill is pushed by the upper segments. I saw one used in a room twenty-four feet wide, and they drew it back after they cleaned out one room and pushed it forward again. MR. HOLMAN: You have no arrangement other than ratchet work? MR. FARNHAM: The ratchet is for forward working and back; the sections are made 12 or 13 feet long, and the stroke of the conveyor automatically works the ratchet; they can ratchet it back; it is a hand device. MR. HOLMAN: They just swing the end of the conveyor across the face to pick up the loose coal? MR. FARNHAM: Yes; they are also planning to use it endwise along the panel face, that and the room work both are quite new in their application, and I do not think the Union Pacific is giving out any results as yet, because the system has not been in use long. MR. HOLMAN: We are planning on putting one in very shortly. MR. HALL: I understand they can swing it over 30 degrees one way or the other, and it goes the same way easily because of the continual jar of the back and forward motion on a 60-degree swing. SECRETARY SHUBART: Take on a comparatively long conveyor, you can get quite a sweep, a large part of the circle. The Duckbill could command quite a large range. For a 12-foot entry, take a four-foot wide advance through the middle of the shot coal, with a 12-foot advance, ratchet back, swing the Duckbill to the rib and repeat; but I do not think they could get as much as 60 degree. on the end of the Duckbill without curving further back. The conveyor is light and not normally set on any permanent foundation. I saw one of Mr. McCarty's first machines, a rather rudimentary one, clean tip a 12-trot entry, 21 tons of coal, in 16 minutes, three men at the face and one at the loading end. MR. FARNHAM: The average time to clean the entries is about an hour-to clean up good-it wouldn't take but a short time; that is why they get this record of several cuts a shift. CHAIRMAN LITTLEJOHN: Are there any other questions you would like to ask Mr. Farnham? MR. HOLMAN: We were discussing this entry driving in regard to the entry loader; an entry loader in advance work, just what you have to do to place the jackbars with the sheave-blocks? Do you dig along the ribs after the coal is shot or do you have any other scheme that could be worked out to a good advantage? MR. FARNHAM: This record is a report I have just received from our Chicago office, without the full details, which I have written for. I am sorry I cannot give you the details. This was an Indiana or Pennsylvania mine, near Pocahontas, not the one where they had an accident. I assume they set the jacks ahead and swung and dumped the coal partly out with a scoop and partly by hand, but the application for that for entry driving is entirely new. The reports stated that they anticipated using that as a standard method of entry driving in the future. I will be glad to see that you get a copy of it when I get the report completed. MR. MONAY: Mr. Shubart, did you say they loaded 12 tons in 16 minutes? SECRETARY SHUBART: Twenty-one tons. MR. MONAY: How long did it take to change the machinery out of there

Jan 1, 1926

By Thos. A. Stroup

From time to time the question of shearing or vertical cutting of rooms and entries especially as an adjunct to the usual horizontal cuts, has cropped up in the literature of coal mining and in the discussions of mining men. Exact and definite data based an thorough tests have usually been lacking however and the present article is written to supply as far as possible this deficiency. The tests given below were made over a period of 90 days in the summer of 1921 and the object was to investigate the general .economics, if any, that might result from the introduction of vertical cutting as a standard practice into the Clear Creek mines. The machine used was the Oldroyd Universal coal cutter and comparative tests were made against the Goodman Straight- face machine and the 35 B Jeffrey Shortwall. The tests however should be held to apply only to the various methods of cutting and not as a study in the relative merits of the various machines. The first series of tests were made in the 2nd East district of No. 3 mine, where only entries were being driven at the time, the tests therefore cover only entry work. The presumption was that the entry width would be 12 feet but the oxerrun in some cases was marked enough to make the work comparable to rooms. The first test made was to determine the time necessary to shear as well as cut the places, and the results were reduced to the time necessary to cut a ton of coal. The time for shearing in the table includes the time necessary to revolve the cutter bar to the vertical position.

Jan 1, 1924

At 10 a. m., Tuesday, November 12, 1912, the following members of the committee appointed by "Coal Age" to organize a Coal-Mining Institute for the Rocky Mountain region, met in the State Capitol, at Denver, Colo. : E. H. Weitzel W. J. Murray T. H. O'Brien W. B. Williams James Dalrvmple F. W. Whitksiie A. C. Watts David Griffiths The following members of the committee were not present: Frank Manley Allan French H. C. Williams Frank Cameron J. E. Pettit D. W. Brown C. H. Gibbs E. H. Weitzel acted as chairman of the meeting. This committee drew up a form of Constitution and By-Laws, to be recommended to the general meeting to be held on the following day; and, with the exception of two alterations, this Constitution and By-Laws, formulated by the Organization Committee, were accepted as a whole by the general meeting. With the exception of a general discussion of affairs that might be brought out by means of such an institute, no further business was done at this meeting of the Organization Committee, and it was adjourned.

Jan 1, 1913

PRESIDENT OLIVER: May I have your attention, please, gentlemen? The Forty-Fourth Meeting of the Rocky Mountain, Coal Mining Institute is now In session. I want to say just a few words of welcome to all the delegates this morning, both old and new. There is a large group of men around here I notice who come to this meeting year after year, and it occurs to me that they must be getting something worthwhile out of these meetings, the renewal of old acquaintances, the making of new acquaintances, and the opportunity to find out what is doing in the technical end of the coal business, and what is new. So, we greet you enthusiastically and trust that you will find this meetnig on a par with all those which have gone before and. that each one of you will leave these sessions determined that you will not miss next year but will be back again. So, with that introduction, we will proceed with the business of the convention. As time is fleeing away from us, if there is no objection, I wil lentertain a motion to dispense with the reading of last year's minutes. Will somebody make that motion? MR. H: C. MARCHANT: I move we dispense with the reading of last year's minutes. (The motion was carries unanimously.)

Jan 1, 1948

MR. STROUP: As soon as the mine workers realize that machine loading is going to be with us permanently, they will gradually accept the view that they, as well as the Mine Operators, will be in the end better off. Don't you find that to be true? MR. BUTLER: I do find that the antagonistic feeling that prevailed at the start is getting less and less and that the miners are co-operating with us. The machine is going to stay with us and I believe it is going to be better for them because instead of having the hard work of heaving coal, they will merely run the machinery that heaves the coal for them. I believe they all feel that way about the matter. MR. McAULIFFE: Mr. Farnham, out of his professional diplomacy, was very careful not to even mention his own machine by name. I would like to say a word about salesmen and about the men who develop the machines. They are perhaps doing more for the industry than we are doing ourselves. This applies also to the railroad business that I put a great part of my life in. If it were not for the energy, courage, and ingenuity of the men who manufacture machines, we would not occupy the advanced position we do today in the mining world.

Jan 1, 1924

[Adams, Frank E U.S. Steel Corp., 919 Kearns Bldg., Salt Lake City, Utah Alger, Van Kaiser Steel, Sunnyside, Utah Allan, Andrew Thompson Creek Coal &Coke Corp., Glenwood Springs, Colo. Allen, Earl W Mine Safety Appliances Co., 257 Rio Grand St., Salt Lake City, Utah Allen, Thomas Chief Coal Mine Inspector, Colorado, Argonaut Hotel, Denver 2, Colo. Anderson, Merlynn D U.S. Fuel, P.O. Box 5022, Dragerton, Utah Anderson, Nephi W Book Cliffs Coal Co., Dragerton, Utah Ankeny, Marling J Bureau of Mines, 5308 Roosevelt St., Bethesda, Md. Arentzen, E. M Lee-Norse Co., Charleroi, Pa. Arentzen, L. E Lee-Norse Co., 2975 18th St., Boulder, Colo.]

Jan 1, 1959

PETER A. NIELSEN RMCMI PRESIDENT 1991-1992 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 88th Regular Meeting and Convention to be held June 28-30, 1992 Tamarron, Durango, Colorado

Jan 1, 1991

By R. R. Knill

With the advent of mechanical loading the need of definite information has become more apparent. The co-ordination of all the individual units of operation has become very necessary From these two essential features in running a mechanized coal mine has come the demand for the "time study." The time study is nothing more or less than the recording of each operation together with the time of clay or the total time expended during a period of work. Using the latter, it is impossible to have information showing just when each piece of work was clone and to what extent they overlap. The studies used here are of the former type, being based on the recording of the operation together with the time of day so that the details of performance of the machine or crew may be followed from starting to quitting time by' referring to the graph upon which the study is taken.

Jan 1, 1928

By Cole A. Wist

?Twowinters ago, what had been a mediocre safety record at West Virginia?s Sago Mine grew dramatically worse. Over 23 months beginning in February 2004, two dozen miners were hurt in a string of accidents, some of them caused by rock chunks falling from the mine ceiling. Federal safety inspectors slapped the mine with citations 273 times, or an average of once every 2 ½ days. Despite this record, the price paid by Sago?s operators was light. Government regulators never publicly discussed shutting down themine and never sought criminal sanctions. The biggest single fine was $440, about 0.0004 percent of the $110 million net profit reported last year by the mine?s current owner.? -Washington Post, January 8, 2006

Jan 1, 2006

By Jim Freeman

After testing 30 fourth year mechanical trade school students with our final mechanical apprentice test, only one passed. ?Most western technical trade school students tested ?Test result average was 52% ?NMC graduating apprentice average is 78% (75% passing requirement) ?Our mechanical test has 200 questions; Electrical test 110 questions

Jan 1, 2010