Search Documents

By P. Halbach

Hydrothermal activity is well known from many locations on most mid-ocean ridges, but no hydrothermally mineralized area had yet been found at the ultraslow spreading southwest Indian Ridge up to October 98 when the Japanese RV Yokosuka with the submersible Shinkai 6500 investigated this area. A massive sulfide field was discovered near 27°51S / 63°56E in the 11th segment west of the Rodriguez Triple Junction. The Free University of Berlin had joined this cruise and taken over the responsibility for the study of the respective sulfide mineralizations. Hydrothermal minerals were sampled during two dives at a water depth of 2940 m close to the summit of an axial volcanic ridge called Mount Jourdanne. Massive sulfides occur on the seafloor as small smooth mounds with an average area of about 5 m2. Their surfaces are weathered and have a reddish to brownish colour. In addition to these mound-like structures, small tube-like chimneys were observed; these chimneys rise approximately 30 to 40 cm above the floor and are less than 10 cm in diameter. No indications of hydrothermal fauna could be detected. All the hydrothermal features are spatially related to faults and smaller fissures controlled by an E-W trending graben system crossing the summit region of the submarine volcano. Such tectonized areas are generally considered to be ideal for hydrothermal activity because they may have both a magmatic heat source in the deeper underground as well as pathways for the fluid circulation.

Jan 1, 2002

By Sophia Katsouri

Hydrothermal circulation that produces sulfide deposits in the marine environment can also produce sulfide deposits in lakes. The major differences in terms of process are (1) in lakes the hydrothermal fluid is meteoric water of low salinity whereas in the marine setting it is saline and (2) the rocks that are leached of metals to produce the deposits are continental crust in one case and oceanic crust in the other. We have examined sulfides that are presently forming in two lakes ? Lake Tanganyika in east Africa and Lake Oyunuma in Hokkaido, Japan. Tanganyika is the second largest lake in the world and the second deepest rift lake, after Lake Baikal in southeastern Siberia. Two hydrothermal fields are known in its northern basin at Pemba and Cape Banza (Tiercelin et al., 1993). At Pemba, CO2 and CH4-rich, low temperature (53-88°C) hydrothermal fluids are forming decimeter-tall chimneys at 2-46 m water depth. Our microscopic and x-ray diffraction study of samples from the Pemba site reveal marcasite and pyrite to be the most common sulfides. Minor minerals include barite, hematite, bornite and chalcopyrite. Quartz and feldspar are also identified and were probably incorporated from the surrounding lake sediments. At Cape Banza, aragonite chimneys, up to 70 cm high, are venting fluids at 66-103°C.

Jan 1, 2001

By James R. Hein

Methane and hydrogen sulfide vent from a cold seep above a shallowly buried methane hydrate in a mud volcano located 24 km offshore of Los Angeles, California in 800 m water. Bivalves, authigenic calcite, and methane hydrate were recovered in a 2.1 m piston core. Aragonite shells of two bivalve species are unusually depleted in 13C (to -19? d13C), the most 13C-depleted shells of marine macrofauna yet discovered. Carbon isotopes for both living and dead specimens indicate that they used in part carbon derived from anaerobically oxidized methane (AOM) to construct their shells. Although the?d13C values are highly variable among specimens, most fall within the range -12 to -19?. This variability may be diagnostic for identifying cold-seep/hydrate systems in the geologic record. Authigenic calcite is abundant in the cores down to about 1.5 m subbottom, the methane hydrate horizon. The calcite is strongly depleted in 13C d13C = -46 to -58?) indicating that AOM was the main carbon source. Three sources of methane are likely: a geologic hydrocarbon reservoir, and biogenic and thermogenic degradation of organic matter in basin sediments. Oxygen isotopes indicate that most calcite formed out of isotopic equilibrium with ambient bottom-water, under the influence of gas hydrate dissociation and strong methane flux. High concentrations of Ag, Hg, Cd, Tl, and other elements in mud volcano sediment reflect leaching of basement rocks by fluids circulating along an underlying fault. Fossil (geologic) methane was likely transported with these fluids.

Jan 1, 2005

By Brenda J. Burd

A very extensive spatial and temporal database on benthic infauna and associated sediment metals has been collected for Island Copper Mine on Vancouver Island, B.C. Canada from 1969 (pre-discharge) to 1998 (3 years post-discharge). The tailings deposited as organically impoverished, copper-rich, clays, silts and sands distributed according to particle size, bottom turbidity currents and strong, vertically mixed tidal currents. In addition, a large deposition of coarser waste rock along the north shore of Rupert Inlet contributed substantial material in the shallower, near-field area.

Jan 1, 2001

By Andrea Koschinsky, Luise Heinrich, Stefan Gößling-Reisemann

"Germany, like several other countries, has entered a contract with the International Seabed Authority (ISA) to explore the prospects of commercial manganese nodule mining in the Clarion-Clipperton Zone (CCZ). Ensuring a maximally sustainable deep-sea mining operation requires a thorough understanding of the environmental impacts associated with every step of the mining process from the extraction of the nodules at the seafloor to the refinery on land. Against this background, the project presented here applies a combination of scenario-building and life cycle assessment (LCA) to assess and evaluate the sustainability performance of the individual process steps as well as the entire mining operation.Life cycle assessment (LCA) is a comprehensive methodological framework that allows the identification and quantification of impacts occurring during a products life-cycle, as well as the analysis and evaluation of their contribution to pre-defined impact categories, such as climate change, acidification and toxicity (Rebitzer et al., 2004). Until now, LCAs with a focus on raw material extraction have almost exclusively been applied to terrestrial processes. Noteworthy exceptions are offshore drilling, offshore wind farms and ocean fishing. Hence, the first part of the project is to investigate in how far LCA can be applied to deep-sea settings and if and in what way it could be adapted to be used in a deep-sea mining context."

Jan 1, 2017

By James C. Barker

Alaska's expansive continental shelf represents future opportunities for marine mineral development. Although today's metal prices and subsidized foreign mineral production continue to discourage industry investment in marine exploration worldwide, the longer term outlook is one of increasing costs on-shore with a dwindling land-base available on which to search for and extract minerals. Likely, the generations of the 21st century will increasingly recover their minerals from the sea-floor. Though largely unexplored, Alaska potentially represents a major port ion of the U.S. marine resources. Several factors demonstrate this. First, the Alaskan OCS is huge; 74% of the entire United States' continental shelf lies off of Alaska, and 54% of the U.S. coastline is Alaskan. Combined with the jurisdiction waters of the Soviet Far East, the Bering-Chukchi shelf is one of the world's largest tracts of shallow water. Second, Alaska is situated at the northwestern terminus of the mineral-rich American cordillera. From Chile to Alaska, major on-shore deposits of precious and base metals, ferroalloys, and industrial minerals are found in the tectonically disturbed belts of the cordillera. In 1988, the western U.S. cordilleran states produced 70% of this country's mineral output (excluding construction materials). Throughout the cordillera's entire 10,000 mile length, the rock units strike largely parallel to the coastline, but in Alaska they extend directly offshore and onto the continental shelf. Consequently, the mineral-rich terranes off of Alaska have a much more complex interaction with coastal and lit-

Jan 1, 1991

By Richard T. Haworfh

The United Nations Convention on the Law of the Sea (UNCLOS) entered into force, for those nations who had ratified it, on November 16, 1994. The Convention deals with nearly every aspect of ocean affairs, including marine scientific research, fishing zones, freedom of the high seas, protection of the marine environment and deep seabed mining. Article 76 of the Convention defines edge of the continental shelf in a way that many earth scientists find bizarre. Out to this limit, a coastal state has sovereignty over the seabed and sub-seafloor resources. Beyond that limit, the key principle of UNCLOS, that "the resources of the deep seabed represent the common heritage of mankind and should be developed to benefit all nations" is invoked. Establishing that limit and managing development in the different areas of jurisdiction is no small task. Canada's continental shelf as defined by UNCLOS covers an area approximately equal to half the area of the Canadian land mass. Interpretation and application of the convention is therefore highly significant for Canada. For example, the sedimentary basin in which the offshore Hibernia oil field is found, extends beyond the 200 mile limit but lies predominantly within the limits of the (UNCLOS) continental shelf. Responsibility for development of inshore placer deposits rests firmly with the coastal state. However, development of deep sea mining, in which the international community plays a management role under UNCLOS, has raised many concerns. Of particular interest to Canada will be the application of the provisions of the convention to interest in the polymetallic sulfides sampled on the mid-ocean ridges such as the Juan da Fuca Ridge. A further complicating factor for Canada is management of fishing stocks. Canada has sought to resolve this "problem" through multilateral negotiations under the UN. Under its "Oceans Act," currently being debated by Parliament, Canada intends to become a world leader in oceans and marine resource management. Similar activity in most maritime nations is setting the stage for a revolution in the way in which use of the world's oceans is managed. Much of this revolution will be guided by UNCLOS. Coastal states that have ratified the convention have ten years in which to define the limits of their continental shelves the clock is already ticking for them! We have yet to see how their actions will guide, or be guided by, those who have not yet ratified. We also have yet to see how national legislation and aspirations will mesh with international conventions that were drawn up in a previous era of environmental standards. This is a time in which many questions have been raised and few firm answers received. However, we must ensure that everyone is aware of what is happening, with what potential consequences, in order that rational decisions can be made. Canada has taken a few small steps that it is happy to share with the world community.

Jan 1, 1996

By Det Juridiske Fakultet, Maria Madalena das Neves

The ocean is increasingly seen as the answer for a myriad of challenges facing humankind. In effect, in addition to being vital for transportation and communication, the oceans contain living and non-living resources that are essential to meet the demand for food, and to the development of pharmaceutical products, energy resources, and high-technology products. This entails that the oceans are under pressure by different activities: navigation, fishing, oil and gas exploration and production, renewable energy development, laying of cables and pipelines, marine scientific research, bioprospecting, and deep-sea mining for minerals and metals. The growing demand for essential minerals and metals such as cobalt, nickel, zinc, copper, and manganese, seen in tandem with technological advances in deep-sea mining, makes the latter an increasingly attractive activity, both in areas within and beyond national jurisdiction. At the same time, the further development of deep-sea mining adds to the problem of the competing uses of maritime space and accentuates the need to balance and articulate the interests of the different users of the seas (States, sponsored deep-sea mining investors, oil and gas investors, fishermen, shippers, etc.). Furthermore, as deep-sea mining activities increase and move on to an exploitation phase so does the possibility of new disputes (for instance during deep-sea mining exploitation a communication’s cable is severed, a vessel conducting deep-sea bottom fisheries damages deep-sea mining equipment, etc.).

Jan 1, 2018

By Richard H. T. Garnett

Large scale, profitable, offshore mining of cassiterite started in 1907 around the coast of south Thailand and continues today in Indonesia. The more complex marine mining of diamonds commenced in the early 1960?s and is now an established industry off the coast of Namibia in southern Africa. The activities have involved many diverse organisations, and have required the development of new marine mining equipment. De Beers Marine, more recently as contractor to Namdeb, has been the dominant producer since 1989. Smaller, public, mining companies, registered in South Africa, Canada and the U.K., have achieved mixed performance results, but the total annual revenue from offshore diamonds now exceeds about US$ 180 M. With the benefit of hindsight, there are some useful lessons to be learned from the experiences. Mining of placer deposits at sea is more difficult and more costly than on land. It justifiably commences in response to a market demand for a product that cannot be supplied in sufficient quantity from onshore sources, not because the marine resource exists. The high costs can be offset in places by submarine grades so high that they have not been seen on land for a century. Technical and commercial success requires a combination, and a sufficiency, of ore reserves, capital, experienced people, and technology. Economic viability is not achieved easily and some diamond mining companies have experienced a very short productive life, terminating in their acquisition or liquidation. The reasons for failure in marine mining, regardless of whether the product is diamonds, gold, or tin, invariably are similar and fall into two categories. Those outside a company?s control include the sea conditions, taxation and fiscal climate, security of lease tenure, and the diamond market. The others, assignable to the company, provide important instructions for those who may aspire to advance the cause of marine mining.

Jan 1, 2004

By Valcana Stoyanova

Data and information for this study were collected in June-July 2009 onboard the RV Yuzhmorgeologiya in the area covers about 7000 km2 in the eastern part of the CCFZ between 10º05? - 10º55?N and 119º25? ? 121º08?W. In accordance with the IOM research program the cruise was intend to acquire both geological and environmental data and information necessary for delineation of nodule deposits and also data for identification of the baseline of benthic ecosystem. Having implementation of its 15-year plan of work for exploration under the contract with ISA, current activities of IOM were focused on nodule fields within prime areas that could be mined in the future. Bottom photographs obtained by towed deep-sea vehicle NEPTUN along 6 profiles with common length about 300 km (Fig. 1). In total, about 11,500 digital photographs (what cover approximately 40,000 m2 of the ocean floor) were analyzed for assessment of nodule coverage and investigation of megafauna (animals, visible in photographs, the dimension more than 2 cm). The giant single-cell organisms Xenophyophorida were the most multiple animals in seabed photographs. Their number on the site area averaged 1187 ind/ha. However, the vertical camera position does not allow counting all xenophyophorids, therefore their valid number is represented 10 times more. According to all available information these protozoans play the relevant role in assemblage of deep-water environment, giving for other animal groups an [ ] additional source of nutrition and a substratum for settlement and attachment. The ophiuroids are found in assemblage with xenophyophorids in many cases, standing on a sediment at their base.

Jan 1, 2010

By Akira Usui, Sayuri Kubo, Satoshi Tokeshi, Shingo Kato, Katsuhiko Suzuki, Teruhiko Kashiwabara

"INTRODUCTIONFerromanganese (Fe-Mn) crusts are a kind of marine chemical sediment composed of Fe and Mn oxy-hydroxides as well as small amounts of clastic sediments, which are ubiquitously found on the surface of slopes of seamounts and oceanic plateaus at depths from 900 to 5500 meters below sea level (mbsl). Fe-Mn crusts contain extremely high concentrations of useful minor metals such as Co, Ni, Te, REEs, and thus are expected as submarine mineral resources. Also, Fe-Mn crusts record the change of chemical compositions of seawater during last several tens million years, which allow us to obtain clues to clarify the paleoenvironmental conditions at the time of its deposition. However, occurrence, chemical compositions, microbial community and growth patterns of ferromanganese crusts are yet fully understood. Hence, a comprehensive study on the genesis of ferromanganese crusts, such as growth rates and enrichment processes of elements, is required to better understand their resource potential as well as their applications to paleoceanographic study.Based on the resource potential of ferro-manganese crust, the project entitled “Next- Generation Technology for Ocean Resources Exploration” was launched as one of the governmental projects to develop the exploration technology based on the scientific research on the submarine resources such as hydrothermal deposits (e.g., a poster by Kawada et al.), ferro-manganese crusts. We have made several research cruise to seamounts in the north-western Pacific such as Takuyo-Daigo and Takuyo-Daisan seamounts (Fig. 1) ."

Jan 1, 2017

A C-CORE study on behalf of the government of Newfoundland identified the inner continental shelf off northeast Newfoundland as having a relatively higher potential for hosting placer gold than other parts of the inner shelf. Under the auspices of the Canada-Newfoundland Cooperation Agreement on Mineral Development, the Geological Survey of Canada conducted a three-year project to map the distribution of surficial sediments and the abundance of placer minerals (particularly gold) from White Bay to Cape Freels. Much of the study area is a fjord coast, with steep rocky slopes and scattered gravel beaches. The extreme east, from Hamilton Sound to Cape Freels, has a wide, shallow inner shelf, sandy beaches, and extensive coastal dunes. Relative sea level was high in the late glacial period. It has fallen continuously in the west, but in the east it dropped to -19 m, before rising to within several metres of the present level by 3 ka. In terms of surficial sediments and processes, five zones are identified: (1) Deep offshore deep basins that contain thick postglacial mud overlying glacialmarine gravelly sandy mud. This zone is below a depth of 370 m in White Bay, 300 m in the Notre Dame Basin. 2) Basin transition zone in which the sea bed has been eroded by currents, so that glacialmarine sediments are exposed in places. Winnowing has formed an uppermost layer of muddy gravel. There is a slight potential for enhanced levels of fine particulate gold, but the gold would not be exploitable. (3) Iceberg impacted zone Above 200 m the keels of icebergs impact the sea bed, causing furrowing and pitting. Furrows predominate in deeper areas, and pits are concentrated at the inner boundary of this zone. Iceberg turbates have developed in shallow waters (60-100 m). Combined with winnowing, iceberg turbation could enhance the potential for concentration of fine particulate gold, but not into economic quantities. 4) Wave dominated zone Above approximately 60 m the sea-bed sediments are highly mobile due to waves, currents, and iceberg impact. Sand is either rippled or organised into sand waves. Gravel is either poorly sorted, and organised into

Jan 1, 1995

By Andrea Koschinsky, Luise Heinrich

(for an oral presentation) Activities for preparing future deep-sea mining offer the unique opportunity to study environmental conditions and anticipate adverse environmental impacts prior to the commercialization of the activity. Until know, environmental research has first and foremost focused on understanding direct impacts occurring at the seafloor or in the water column such as the removal of substrate, the suspension of sediment or the creation of particle plumes. Impacts occurring above the sea surface have thus far rarely been considered. The operation of deep-sea mining equipment, as well as of mining and transport vessels will be associated with a considerable energy demand. In the open ocean, this energy will be provided by heavy fuel oil (HFO), which is the cheapest and most common marine fuel. The combustion of HFO will be associated with the release of greenhouse gases and other pollutants. Deep-sea mining will thus directly add to already critical air pollution levels caused by international shipping. To contribute to a holistic assessment of deep-sea mining impacts and to address the previously outlined knowledge gap, we present the methodology to quantify the fuel consumption and associated emissions of a potential typical commercial manganese nodule mining operation in the Clarion-Clipperton Zone (Fig.1). Using the mine set up and energy demand estimates from a study commissioned by the German Federal Ministry of Economic Affairs and Energy supplemented by information from literature, we anticipate emissions of carbon dioxide (CO2), carbon monoxide (CO), methane (CH4), nitrous oxide (NO2), nitrogen oxides (NOx), sulfur oxides (SOx), particulate matter and non-methane volatile organic compounds.

Jan 1, 2018

By Peter Halbach

Hydrothermal activity is well known from many locations on most mid-ocean ridges, however no hydrothermally mineralized area had yet been found at the ultraslow spreading southwest Indian Ridge up to October 98 when the Japanese RV Yokosuka with the submersible Shinkai 6500 investigated this area. A massive sulfide field was discovered near 27º51S / 63º56 E in the 11th segment west of the Rodriguez Triple Junction. The Free University of Berlin had joined this cruise and taken over the responsibility for the study of the respective sulfide mineralizations. Hydrothermal minerals were sampled during two dives at water depth of about 2940 m close to the summit of an axial volcanic ridge called Mount Jourdanne. There massive sulfides occur on the seafloor as small smooth mounds with an average area of about 5 m2. Their surfaces are weathered and have a reddish to brownish colour. In addition to these mound-like structures, small tube-like chimneys were observed. These chimneys rise approximately 30 to 40 cm above the floor and are less than 10 cm in diameter. No indications of hydrothermal fauna could be detected. All the hydrothermal features are spatially related to faults and smaller fissures controlled by an E-W trending graben system crossing the summit region of the submarine volcano. Such tectonized areas are generally considered to be ideal for hydrothermal activity because they may have both a magmatic heat source in the deeper underground and pathways for fluid circulation, respectively.

Jan 1, 2001

By Cornel E. J. de Ronde

Volcanic arcs, including both island arc and intra-oceanic arc systems, combined extend for ~22,000 km around the Earth, with the majority (~20,000 km) occurring in the Pacific basin. These arcs are host to over 700 volcanoes of which ~200 are submarine and as such represent great potential for hosting massive sulfide deposits formed at seafloor hydrothermal vent sites. The Kermadec arc extends for ~1,200 km northeastwards from the North Island of New Zealand and forms the southern part of the ~2,500-km-long Tonga-Kermadec intra-oceanic arc system. At least 94 volcanoes are known to exist along this system with 74, or about 80%, being submarine. At least 33 volcanoes occur along the Kermadec part of the arc with all but one (Raoul Island) being submarine. The first sulphides recovered from the entire Tonga-Kermadec arc were in 1996 from the Brothers and Rumble II West volcanoes of the southern Kermadec arc. The 1998 R/V Sonne research cruise recovered a more comprehensive suite of mineralised samples from Brothers, and also found evidence for hydrothermal venting at Monowai, Vulkanolog, Rumble III and Clark volcanoes. The March 1999 NZAPLUME cruise systematically surveyed 260 km of the southern Kermadec arc and found that 7 of 13 volcanoes were hydrothermally active, with the vent fields either located within calderas (e.g., Brothers, Healy, Rumble II West) or atop volcanic cones (e.g., Clark, Tangaroa, Rumble V, Rumble III). The May 2002 NZAPLUME II cruise surveyed a further ~580 km of the mid-segment of the Kermadec arc, from Brothers to volcano 'L', a submarine volcanic edifice 35 km NW of Macauley Island. This cruise surveyed 13 major volcanoes and 8 smaller volcanic edifices and confirmed hydrothermal venting at the Vulkanolog site, and discovered new vent fields atop a volcanic cone within Macauley caldera, immediately offshore Macauley Island, and another at the summit of volcano 'L'. A further new site was found atop a volcanic knoll immediately S of Healy caldera during time-series sampling of the vent sites found during the 1999 cruise. All the vent sites discovered along the Kermadec arc occur in water depths between 1650 and 150 m.

Jan 1, 2002

By Cornel E. J. de Ronde

Brothers volcano (34°51.7?S, 179°03.6?E) is a large caldera volcano that forms part of the active Kermadec arc south of 32° S, NE of New Zealand. It is an elongate edifice striking NW-SE that is ~11-13 km long by 7-8 km across. The caldera has a basal diameter of 3-3.5 km and is surrounded by 350-450 m high walls with the floor 1,850 m deep. A volcanic cone of dacite composition rises 350 m from the caldera floor and partially coalesces with the southern caldera wall. Much of the caldera construction and the location of the hydrothermal vent sites are controlled by intersecting basement structures. Three hydrothermal sites have been recognized at Brothers; NW caldera, SE caldera and cone. Multiple hydrothermal plumes were mapped from the bottom of the caldera upwards to a depth of 900 m and originate from two of the sites; one on the NW caldera wall the other atop the cone. Analyses of these plumes show that the two vent sites are chemically distinct. The cone site itself hosts three distinct vent fields (summit, upper flank, NE flank) that in 1999 had plumes (mainly from the summit) containing relatively high concentrations of gas with a shift of -0.27 pH units (proxy for CO2) and H2S concentrations up to 4,250 nM, particulate Cu (PCu) of 3.4 nM, total dissolvable Fe (TDFe) of 4,720 nM, TDMn up to 260 nM and Fe/Mn values between 4.4 and 18.2. However, in 2002 plumes from the summit vent field had noticeably lower concentrations of PCu (0.3 nM), TDFe (175 nM), and Fe/Mn values of 0.8, although similar TDMn (220 nM) and shift in pH (-0.22) suggesting a state of flux for this site. By contrast, plumes originating from the NW caldera site have much less gas with a pH shift of -0.09 units and no detectable H2S, TDFe up to 955 nM, TDMn up to 150 nM, and Fe/Mn values of 6.4, and have not changed their composition over the same three year interval indicating a more chronic hydrothermal system. Plume d3He results show helium is decoupled from more near-surface vent fluid sources although a shift in R/Ra values from 6.1 ± 0.5 in 1999 for the combined vent sites to 7.2 ± 0.1 in 2002 indicates a less radiogenic input of helium over three years, suggestive of a greater magmatic input to the system.

Jan 1, 2004

By J. W. Jamieson

"The future of the marine mining industry is tied to the resource potential of the seafloor. Everything from economic feasibility, policy decisions and environmental impact assessments to extraction techniques and mining tool design rely on an understanding of the size, composition, and distribution of the deposits. Development and regulatory decisions must ultimately be tied to not only the grade and tonnage estimates of individual deposits or groups of deposits, but also an understanding of the uncertainty of these estimates. Here, we will discuss how seafloor massive sulfide (SMS) deposit grades and tonnages are evaluated, and the sources of the uncertainties associated with these values.TONNAGE UNCERTAINTYFirst-order tonnage (size) estimates for SMS deposits are primarily determined from calculating the volumes of material that occurs as positive bathymetric features on the seafloor. The extent of sulfide mineralization on the seafloor can be determined either from visual surveys (camera-tow, remotely-operated vehicle (ROV), or human-occupied submersible surveys) or from volume calculations of bathymetric features identified from digital elevation models of the seafloor, or a combination of both methods. For bathymetric models to be used to identify deposits in the absence of visual groundtruthing, data resolution of 1 m or less is generally required to confidently identify a feature as being hydrothermal in origin (as opposed to a volcanic or tectonic feature), and therefore near-bottom multibeam data acquisition (e.g., using autonomous underwater vehicle (AUVs) or remotely operated vehicles (ROVs) is required (Fig. 1). Specific characteristics of bathymetric features, such as shape, slope angles and surface roughness can be used to identify features of hydrothermal origin (Fig. 1). However, so far, bathymetric features mapped at a resolution of ~1 m cannot be relied upon to unambiguously distinguish a sulfide mound, and the additional use of multiple AUVmounted sensors, such as magnetometers, which can be used to detect hydrothermal upflow zones, or self-potential sensors, which detect electrical fields related to the oxidation of sulfide minerals, can increase the confidence that a bathymetric feature is indeed a sulfide body, without the need for expensive and time-consuming visual surveys (c.f. Petersen et al., this volume)."

Jan 1, 2017

By Charles W. Finkl

Coastal and marine aggregate (sand and gravel) mining on US continental shelves is a major activity that supplies industrial and commercial demands for these raw materials. Because Pacific, Atlantic, and Gulf coasts contain significant shoreline segments that are in a critical state of erosion, sand-gravel and mixed sediment (sands with a high percentage of silt-plus-clay) deposits are mined in efforts to mitigate land loss. Sandy shores, and to a limited extent gravel coasts, erode by shoreline retreat due to relative sea-level rise and sediment starvation in littoral drift patterns. Mostly gravel shores occur in high latitudes and shorelines often advance seaward due to isostatic rebound following the LGM (Last Glacial Maximum 18,000 YBP). Sandy and fine-grained shores occurring in middle and low latitudes of the conterminous United States are problem coasts that require beach renourishment and reconstruction of barrier islands. Muddy coasts of the Mississippi Delta region are especially problematic because some islands are literally disappearing in response to subsidence. Replacement of sediments lost to the littoral drift system or returned to sedimentary sinks by drowning is thus a critical endeavor that involves annually dredging hundreds of millions of cubic meters of sediments from the continental shelf area. The types of shelf sediments that are amenable to marine mining techniques, their occurrence, and means of detection are highlighted in this paper. Minable Sediments on the Continental Shelf Wide varieties of sedimentary bodies that occur on the continental shelf are amenable to mining for beach renourishment and barrier island (beach-dune-marsh system) reconstruction. Relict terrestrial deposits make up a small but important proportion of shelf sediments that were deposited on coastal plains, now drowned by the post-glacial sea-level rise to form continental shelves. Examples of these deposits include drowned moraines, outwash plains, eskers, and kettles along the northern Atlantic coast in addition to siliciclastics along middle latitude Pacific, Atlantic, and Gulf coasts. Special cases include carbonate sequences along tropical costs of Florida and the muddy coasts of deltas, mostly in Louisiana. Specific types of minable deposits thus include shoreface attached sand sheets, dunes, and ridges in addition to offshore inter-reefal sands (between coral reefs in the Florida Reef Tract), bank deposits, and sand waves (ridges) that extend into US territorial waters. Nearshore siliciclastics include ebb-tidal deltas and bars. Drowned river valleys occur along all three US coasts and can be exploited for their fluvial sands if the covering mud sheets are thin.

Jan 1, 2005

By Mark Vardy, Kate Dobson, Isobel Yeo, Paul Lusty, Bramley Murton

In response to anthropogenic climate change, the way in which we use and generate energy is changing. To facilitate these developments, it is essential that we increase and diversify the supply of ‘E-Tech’ elements essential for cleaner energy generation and more efficient usage. The vast majority of these materials (e.g. cobalt, lithium, niobium, platinum group metals, rare earth elements and indium) come almost exclusively from mining and new resources must be found and developed in order to secure supply and meet the demands of the future. Ferromanganese (FeMn) crusts are rich in cobalt, tellurium and rare earth metals, and are common on seafloor hard grounds at water depths over 1000 m. The mining of both FeMn crusts and nodules is potentially viable dependent of the balance of cobalt and nickle prices (Martino & Parson, 2012), however, crusts need to be at least 4 cm thick with cobalt contents of at least 0.8% (International Seabed Authority, 2008). The difficulty for those wishing to exploit these resources is firstly finding them, and secondly assessing their potential remotely. Such capability would not only save time and money, but also allow mining operations to be more focused, reducing needless destruction of seafloor habitats from exploratory mining or mining of noneconomically worthwhile deposits. In this contribution, we examine the distribution of crusts on a single Atlantic Gyot (Tropic Seamount), the morphology of FeMn crusts, their variable growth patterns and the characteristic geophysical response from crusts in various datasets, including ship based 60 m resolution multibeam and high resolution bathymetry, backscatter and sub-bottom profiler data acquired using an Autonomous Underwater Vehicle (AUV).

Jan 1, 2017

By Cees van Rhee, Rudy Helmons

INTRODUCTION Seafloor Massive Sulphides are typically found near the oceanic ridges at larger water depths (>1km). The physical properties of SMS, as shown in table 1, are comparable to the properties of weak rock. One of the technical challenges to enable extraction from these locations is the cutting or excavation process. Experiments have shown that the energy needed to excavate the material may increase with water depth (Alvarez Grima et al. 2015). Besides that, it is demonstrated that rock that fails brittle in atmospheric conditions can fail more or less in a plastic fashion when present in a high pressure environment, as would be the case at large water depths. The goal of this research is to identify the physics of the cutting process and to develop this into a model in which the effect of hydrostatic and pore pressures is included. The cutting of rock is initiated by pressing a tool into the rock. As a result, at the tip of the tool a high compressive pressure occurs, which leads to the formation of a crushed zone. Depending on the shape of the tool and the cutting depth, shear failures might emanate from the crushed zone, which will eventually expand as tensile fractures that can reach to the free rock surface. Through this process intact rock will be disintegrated to a granular medium. For an overview of the process (figure 1). Additionally, the presence of water in the pores of and surrounding the rock influences the cutting process through drainage effects. The most relevant effects are weakening when compaction and strengthening when dilation occurs in shearing and tension. Deformation of the rock causes the pore volume to change, resulting in a under or over pressure. As a result, the pore fluid needs to flow. The magnitude of the potential under pressure is limited through cavitation of the pore fluid, limiting further reduction of the pore pressure (figure 2). The drainage effects cause the rock cutting process in a submerged environment to show a stronger dependency of both the hydrostatic pressure as well as the deformation rate (figure 3).

Jan 1, 2018