Search Documents

By Scott RM

The project management and construction plans adopted by Davy McKee for the Cooper Basin Liquids Project resulted in a project notable for the Relatively short duration from initiation of the design through to liquids production. Two locations were involved, one at Moomba in the far northeast of South Australia some 800 km from Adelaide, and the other at Port Bonython some 40 km from Whyalla. Total expenditure by the owners at the two sites was in excess of $600 million. Matters covered include organisation, transport, construction, industrial relations, project services and commissioning.

Jan 1, 1986

Although the title of this paper permits a very broad scope for discussion, I propose to deal mainly with those aspects of design part- icularly related to rook filling, the'theme of this conference. The unique suitability of belt conveyors for the continuous economical delivery of materials into or out of underground workings, is well established and needs no elaboration. The facility with which conveyor units, comprised of modern modular components, can be adjusted to lengthen or shorten, their ability to be readily repositioned to suit the develop- ment of a work pattern and their virtues as low noise, reliable transport media, are already accepted by all who are involved with the mining industry.

Jan 1, 1973

By Ellis CG

The N.S.W. Department of Mineral Resources commissioned its first Mobile Gas Laboratory in 1973.Although originally intended for diesel exhaust analysis, it has been progress- ively made more suitable for mine air analysis. Currently there are two upgraded units in operation. These laboratories have been used at the scenes of four mine fires, two mine explosions and three recovery operations. The authors' experience jointly covers all of these incidents. In this paper they recount the role of the Mobile Laboratory in each incident - including the difficulties encountered - and trace the development of these units to their present state. Future improvements are foreshadowed, and some comments offered concerning the likely future role of these vehicles in mine Emergencies.

Jan 1, 1981

The low grade Mount Charlotte orebody was first mined with minimum capital expenditure by mechanised cut and fill stoping. The lower block was prepared simultaneously for open stoping by shaft sinking and installing another crusher and services. Similar development for the third block was discouraged by economic factors and reduced tonnage. Decline develop- ment required less capital and opened up ore reserves commensurate with advance, providing flexibility to stop operations without commit- ment: A 1 in 7 decline measuring 4.25m x 5.5m to accommodate standard Euclid 25 tonne dump trucks was developed south of the orebody. A fleet of four trucks average 12 loads each per shift over a haul distance of 700m.

Jan 1, 1973

By G B. Siddall

The paper examines the current state of equipment and circuit design, with reference to Australian practice. Following a review of the changes in milling applications over the last 15 years, developments in mill design are examined. Current issues include trunnion versus shell support; drive type and economic analysis for comparison of the various systems; the efficiency of the mill discharge system for slurry and pebble removal, and lining configuration. Peripheral problem areas such as pebble crushing and classification are briefly examined. Circuit design issues are reviewed. The decision to modify the traditional primary crushed feed is examined with reference to recent and proposed installations. A retrospective look at fully autogenous installations and their successes is presented, and current views on increasing throughput are assessed. Finally, future developments are anticipated in mill design and control, and competing processes are identified.

Jan 1, 2002

By James DG, Turner JH

This paper describes laboratory testwork for the beneficiation of a medium grade iron ore, using Wet High Intensity Magnetic Separation (WHIMS). Factors leading to the selection of machine type for this method of separation are discussed and the design of the WHIMS section flowsheet of an iron ore beneficiation production plant are described including methods to achieve operational flexibility and adequate protection of the WHIMS separating chamber. The results of the commissioning and operation of the production plant over several years are described, together with experience developed in plant operation. Data on recovery of hematite over the full range of size fractions treated is presented and compared with data in the literature. Potential methods of improving plant performance are discussed. KEYWORDS: Iron ore beneficiation, plant design, wet high intensity magnetic separation.

Jan 1, 1993

By Walker V

The 'MAGNADET' to provide a safe enhanced protection extraneous currents, electricity and radiodetonator was designed electric detonator with against the effects of current leakage, static frequency energy.It has found a particular niche in shaft sinking operations and Mount Isa Mines initiated trials of the system in 1983 as part of the design work for the 3000/3500 orebody access shaft.Initial surface blasts indicated a number of significant advantages which were confirmed during the bench and concrete phase of the M37 shaft sink. The application of 'MAGNADETS' was later extended to the horadiam phase of the project.Details of the exploder capacity calculations for the various M37 round designs are included with the paper.

Jan 1, 1985

Mineral sands make up only 3% of the value of mineral production in WA. However, the distribution of mining operations, close to the more highly populated south-west coastal areas, and the wide range of land-tenures and land-uses involved has resulted in the most complex range of regulatory procedures found anywhere in the State's mining industry.Mineral sands are mined on private agricultural and "minerals-to-owner" land, State forests, nature reserves, coastal reserves and vacant Crown land. Local Government authorities, State Government departments and private landholders can, depending on the land tenure, be involved in setting the environmental conditions for mining operations and supervising subsequent rehabilitation. In the past, rehabilitation was predominantly aimed at establishing an agricultural land-use after mining; however, it is now necessary for mining companies to rehabilitate mined areas to a much wider range of end land-uses.

Jan 1, 1986

By A J. Moore

The Australian Coal Association Research Program (ACARP) funded project, No C14057, entitled æEffect of Blasting on InfrastructureÆ, has been carried out with the objectives of providing methodologies for the assessment of the strength of infrastructure types and the establishment of responsible and realistic limits. Personnel from Melbourne, Newcastle and Swinburne Universities and Terrock Consulting Engineers conducted the project. Infrastructure types including: conveyors; power transmission towers; wooden power poles; electrical substations; pipelines, bridges; public access roads and underground workings have been investigated by both field studies and structural analysis. Railways, underground telecom cables, dams and industrial buildings have been reviewed using general structural analysis. This paper has been prepared for the mining industry to provide a progress report on the project.

Jan 1, 2007

Taxation is a major factor in evaluating mining project developments. The availability or otherwise of effective tax relief for project expenditures can have a crucial bearing on the decision to proceed with a project. The special position of the mining industry is recognised within the Income Tax Assessment Act (the "Tax Act") by special legislation, namely Divisions 10, 1OAAA and 10AA. The legislation both extends the scope of items which are eligible for deduction and affects the timing of deductions. Generally, the legislation separates expenditure into 3 categories: 1. Expenditure on exploration 2. Capital expenditure on the development and the running of the mine; and 3. Facilities used in the transport of minerals. Companies evaluating a project should carefully analyse their proposed expenditures, allocating them between these categories so as to identify potentially non-deductible expenditures and to determine the period over which tax relief will be Obtained.

Jan 1, 1983

By O Ostrovski

Direct iron smelting reduction has been examined using a modified 50 kg induction furnace. The furnace was equipped with continuous raw material feeding, a top oxygen lance, argon bottom bubbling, and sensors for measurement of gas and bath temperatures, gas composition and other parameters. In the base case, iron ore was charged at the rate of 1.5 kg/h, coke flowrate was adjusted to maintain a char fraction in the slag at 30 wt per cent, the oxygen flowrate was 100 Nl/min and the post-combustion ratio (PCR) was 60 per cent. The PCR was varied from 45 to 75 per cent by changing the lance height relative to the bath surface. Smelting reduction of Whaleback iron ore was investigated at different post-combustion ratios and iron ore feedrates using coke and coals with different volatile matter. The rate of iron oxide reduction increased with increasing iron oxide concentration in the slag, with a slight deviation from a linear function. The post-combustion ratio affected iron ore reduction and partitioning of elements between phases in the smelting reduction furnace. The high volatile coal investigated was found to be unsuitable for iron smelting reduction in the laboratory furnace.

Jan 1, 2000

By S Tavelli

This discussion will present a case study in developing solutions to a metropolitan quarryÆs public relations, legal, environmental, and productivity problems. It details an extensive and detailed project to address the blasting practice in a medium sized quarry that is surrounded by residential and industrial zones. The principle work was done over four months duration during the normal production season. It included detailed drilling and blasting audits for baseline information. In addition, geologic characterisation, seismic modeling, correction of deviations from best practices, and implementation and monitoring of precise electronic timing to provide dramatic solutions for the quarry. The quarry is in the near suburbs of a large metropolitan city. It is framed on two sides by residential municipalities and on two sides by industrial zones. At the start of the project, the quarry was in court as a result of the lawsuit by one of the neighboring towns that was suing to close the quarry. The lawsuit had progressed to the advanced stage where in the Judge had appointed an arbitrator to make the decision of continued operation. This arbitrator was to observe our progress and recommend to the Judge the disposition of the case.

Jan 1, 2004

The P49 Shaft, Hilton Mine, was sunk and equipped for Mount Ise Mines Limited by con- tractors Cementation - Thiess Joint Venture. The leached siltstones to a depth of 150m were known to contain large volumes of water. These siltstones were cored and tested in the laboratory. Field results confirmed that cement grouting was relatively ineffective but that chemical grouting was effective. The Sm diameter shaft was sunk to a depth of 1040m. Weak strata to the full depth re- quired continuous temporary support by rock bolts and mesh before the concrete lining was poured, and made sinking conditions difficult. After completion of the shaft sinking the headframe was redesigned and modified to allow shaft equipping as a combined service and hoisting shaft with seven compartments. The shaft steelwork was designed and fab- ricated for service with high speed conveyances operating under corrosive conditions. The steelwork, weighing approximately 1500 tonnes, was installed to a high degree of accuracy which required guides not to depart from true verticality by more than 2mm over any 5m, or 15mm over the full shaft depth.

Jan 1, 1976

By B Hu, B Zhang, J Wang, H Ma, D Liu, L Han

Zeolites are potential carriers of slow release fertilisers due to their unique phenomenon for salt occlusion. A comparative study was performed on the capacities of potassium nitrate (KNO3) occlusion in molten KNO3 treated synthetic 4A and 13X zeolite molecular sieves with main channel sizes of 0.41 x 0.41 nm and 0.74 x 0.74 nm respectively. The results show that in a laboratory setting, the treated zeolite 4A contained 13.57 per cent of occluded KNO3 and the treated zeolite 13X did not contain any. This was confirmed by the regular release of K+ and NO3- during washing both treated mixed samples with water and by their IR spectra and TG analysis. There are also changes of the relative intensities of peaks in X-ray diffractograms of both treated zeolite samples. K+ release from molten-KNO3 treated zeolites in deionised water and simulated soil solution shows that release of K+ from KNO3 occluded in zeolite 4A are slow and steady. Proper size fit between the channel size of zeolites pore and the size of K+-NO3- ion pair of KNO3 is the decisive factor for zeolites to occlude KNO3.

Jan 1, 2008

Project managers must juggle many aspects to bring their project in on time, on budget, and in accordance with the aims of the project owner. Whether the project is a mining feasibility study, a technology implementation or a construction project, it falls to the project manager and his or her team to deal with risk from two standpoints, which may be at odds with one another. First, a project team must deal with risks to the project itself û that is, risks to on-time, on-spec and on-budget delivery against the value promise made to the customer. Second, there is the management of risks within the subject matter of the project, undertaken on behalf of the customer. The project manager cannot dodge this responsibility; yet there is a tendency (particularly in smaller, in-house studies) to avoid digging too deep, possibly for fear of what may be uncovered! This paper investigates the responsibilities of project teams in regard to risk management and reporting. It examines ownership of project risk; the nature of risk management activities undertaken by the team during the course of a project; and outlines some controls to ensure that the two opposing arms of project risk are reconciled for the benefit of both the project team and the project owner.

Jan 1, 2007

By P G. Fuller

The Woodlawn Mine near Canberra faced the challenge of poor ground conditions from the commencement of underground operations 1987. Talcose shears bounded the dense massive sulphides on both the hangingwall and footwall side of the orebody. In another area the talc existed not only on the edges of the orebody but through out it as well. The country rock was relatively weak shales compounded by a low stress environment that allowed the wall rocks to fall apart quite easily. The challenge for the operators was to overcome the poor ground conditions. This was done by attacking the problem from three directions:technology, how technology is applied, human relations and leadership by all levels of the Management team, and by ensuring that these processes meshed together well.Woodlawn in it early days as an underground mine enlisted the assistance of BFP (Formerly Barrett Fuller and Partners) as a second set of eyes to assist with the assessment of the ground control procedures. The results are discussed in this paper. The progression to this end result included:non-contract payment systems; ground control training for the full range of mining personnel; the development and enhancement of cable bolting and shotcreting equipment; the development of Practical Standard Work Procedures by mine operators; and innovative use of shotcrete and cables bolts to control extremely poor ground conditions.

Jan 1, 1998

By De Cuyper J

Laboratory testwork has been performed on ancient residues from the cyanidation of a previously roasted gold-containing pyrite and arsenopyrite ore. By grinding to 95 per cent minus 60 microns, and after a strong aeration conditioning of the pulp, a gold recovery of approximately 67 per cent was obtained by cyanidation. This recovery was brought up to 80 per cent by leaching with thiourea, after a preleaching step with sulphuric acid under severe conditions of acidity and temperature. To avoid excessive capital costs bound to such processes, it was decided to investigate the possibility of applying flotation after grinding at a size similar or finer than the one used for the leaching tests. The method turned out to give interesting results because of the natural flotability observed at pH values lower than two for particles rich in gold present in the residue. After two cleaning steps, a final concentrate, representing around one weight per cent of the feed, was obtained with an approximate gold content of 350 g/t, representing a batch recovery of gold of about 50 per cent. Apart from sulphuric acid, whose addition was very high (flotation slurries at 25 g/l H2SO4), other reagents were not found necessary. Additional flotation tests were carried out to examine whether the recycling of the cleaner tails was justified but the gain observed appeared insufficient.

Jan 1, 1993

The able address on the currency question given by the Right Honorable A. J. Balfour, M.P., late leader of the Government, at the Mansion House lately, before a large and influential audience, will strike a key-note that will resound throughout the world. It is high time that gentlemen of position and influence should come forward and express their views on this subject, so as to cause the matter to be,more seriously considered than it has been. The question can be no longer ignored or treated with indifference by bankers, financiers, merchants, miners, and others interested in the settlment on some basis the relative values gold and silver bear to each other. It is gratifying to not that such a great leader of political opinion as Mr. Balfour has given serious attention to this important question.The address created a deep impression ,on the minds of many who probably had not given the matter much att.ention, and Mr. Balfour's words will re-echo over a wide range of thought with such effect that I have no doubt they will materially help to check the downward tendency of the value and uses of silver. As a mining engineer, interested in the development of our mining resources for increasing gold aud silver for currency, and having devoted much attention to the subject, I cordially approve of the views set forth by Mr. Balfouf, and I think the general body of all interested in the production of gold and silver will do the same.

This paper reviews the developments in understanding of the entrainment mechanism and its modelling in industrial flotation processes over the last 30 years. Both valuable and gangue minerals in the pulp zone of an industrial flotation machine can be transported through the froth zone to the concentrate launder in the water which must also be transferred from the pulp zone to maintain a stable froth zone in conventional flotation. A size dependent portion of each entrained mineral continues in normal circumstances to the concentrate launder. The size dependency arises because the larger particles are able to drain more successfully from the froth region. Gangue minerals are recovered by a number of mechanisms, entrainment being an important one in many cases. The entrainment mechanism is discussed on the basis of the pattern observed in recovery û size data for minerals. Its industrial implications are discussed and means of minimisation of the importance of the mechanism are also discussed. Various means proposed for mathematical modelling of the entrainment mechanism are also described. The effect of process variables on key parameters in these models is reviewed. Properties of both the pulp and froth zones are discussed where needed and means of taking additional measurements with devices developed over the last ten years are discussed as part of the collection of more detailed data on the flotation process in general and the entrainment mechanism in particular.

Jan 1, 2005

By C Fountain

It is commonly known that copper smelter terms include penalties if the concentrations of elements, such as arsenic, mercury and fluorine, exceed stipulated limits. It is less commonly known that the behaviour of these elements in the smelters can depend on the processes used to treat the concentrate. The principle behind the penalties is to compensate the smelters and refineries for additional costs caused by the presence of the penalty elements, but these costs will vary depending on the process used and the location of the smelter.The issues caused by the minor elements include effects on the occupational health of smelter workers, increased environmental disposal costs, increased operating costs and reduced cathode copper quality.The effects of minor elements can be surprising. High levels of arsenic in concentrate are considered undesirable, but some smelters add arsenic to anode copper to improve the performance of the refinery.Excess concentrations of some elements will result in rejection of concentrates by smelters. China has blanket import bans on copper concentrates with concentrations of lead, arsenic cadmium, fluorine and mercury exceeding specified levels.This paper will review the behaviour of minor elements in smelters and refineries, explaining the deleterious effects of each of them, to provide a greater understanding for people and organisations wishing to market copper concentrates.CITATION:Fountain, C, 2013. The whys and wherefores of penalty elements in copper concentrates, in Proceedings MetPlant 2013 , pp 502-518 (The Australasian Institute of Mining and Metallurgy: Melbourne).

Jul 15, 2013