Search Documents

By Taghi Sherizadeh, Paul Brooks, Dogukan Guner, Samuel Nowak

Large excavations are well known to result in rock mass deformations which can present challenging situations for mine personnel. Most of the currently available ground movement monitoring devices fail to adequately provide mine operators with highly accurate and meaningful insights into rock mass deformation or displacement. The use of distributed fiber optic sensors (DFOS) in industries such as oil and gas and civil engineering has shown the potential of these sensors to deliver real-time, highly accurate, and long-range distributed strain measurements with great success. However, the use of these sensors in underground mining is limited to a few case studies.

By Brian Mangogna, Clay McNail, Weishi Mang, Adam Steimel

Together with innovatively applying modern flotation reagents and developing the breakthrough mill enterprise expert control and operating system, Doe Run Buick Mill constructed an advanced large copper rougher scavenger to process its complex Pb\Zn\Cu ore more efficiently. The scavenger circuit, featuring its own motor control center, air blower, multiple reagent loops and FrothSense+™ camera, operates both mechanically and chemically to maximize copper recovery and under expert control. Such scavenger features can be applied to zinc rougher circuits for all Doe Run mills to maximize Cu recovery during Cu special runs when the zinc rougher becomes a copper rougher scavenger.

Feb 1, 2025

By T. D. Murphy

In the fall of 1988 it became evident that the accuracy of sulfur forecasts for Monterey Coal's No.1 Mine needed to be improved. In addition, it became necessary to predict if any individual train shipments during a month would exceed a contract sulfur limit. The challenge was to develop a forecasting process that would take into account the variability of the coal in the ground as well as the difference between laboratory and preparation plant sulfur reduction efficiency, and the effects of mining coal with multiple units. This paper describes how geostatistics and simulation techniques were used to meet this challenge.

Jan 1, 1992

By G. G. Marino

Little comprehensive information has been reported on the behavior of room-and-pillar mines. The objective of this paper is to present case data on mine failures in the Illinois basin for use in practice. Presented are results of an ongoing study and details on the site characteristics of cases where sags have developed on the surface. Site data are reported to show the geologic, mining, and sag conditions that existed. Sags mainly develop from pillar, floor, or pillar-floor failure. The character of the sags depends upon the type of mine failure as well as the overburden response.

Jan 1, 1989

By J. D. McKendrick

Alaska's Arctic Slope lies between the Brooks Range and Beaufort Sea and is a region about the size of Nebraska. It has some of Alaska's richest hydrocarbon deposits. In addition to containing petroleum and natural gas. Much of the area west from the Colville River has low-sulfur coal deposits which are shallow enough for surface mining. Developing those resources will require a firm and realistic' commitment to protecting and rehabilitating the natural habitats. Balancing such a commitment with economic constraints in a practical sense requires knowledge of the environment and its associated biological components, i.e. the soil/water-plant-animal relationships.

Jan 1, 1988

By David D. Rabb

Leaching or solution mining, a relatively simple and economical process for beneficiating metallic ores, is likely to find increasing application in the treatment of low-grade ores that are impractical to mine by any other means. This process may be carried out in two different ways: 1. Dump leaching, where the ore is moved from its original location to be leached at another site. 2. In situ leaching, where the ore is leached in place by introducing the leach solution at the top, letting it flow down through the ore under gravity, and then recovering it plus the dissolved metals it contains.

Jan 1, 1969

By D. J. Collins

While the charcoal in pulp (CIP) process was introduced to the mining industry many years earlier, it did not gain widespread recognition until 1973 when Homes take Mining Company installed a CIP circuit at their Lead, South Dakota plant. Since then, a number of mills have been put into production which utilizes activated charcoal for the recovery of precious metals. One of these plants was the Jerritt Canyon mill which Freeport Gold Company commissioned in 1981. It was during the time that the author was employed by Freeport Gold Company that the ideas and concepts presented in this paper were formulated.

Jan 1, 1989

By A. Wallace Mitchell

Barite deposits in Nevada occur as bedded and vein-types along a north-northeastern -trending zone which parallels the Antler orogenic belt The bedded deposits of Nevada are the most significant economically. They are presently supplying eighty-five percent of the domestic barite production which is used primarily as a weighting agent in the petroleum drilling industry. The ore bodies are controlled both structurally and stratigraphically, occurring along regional and local structural breaks in siliceous eugeosynclinal rocks of mid-Paleozoic age. Evidence for origin of the barite includes sedimentary and hydrothermal features indicating that localization probably took place along fractures in the seafloor.

Jan 1, 1980

By Henry G. Healy

Observation well (Hydrographs are shown for these selected wells) Contour represents the height, in feet referred to mean sea level, to which water would have risen in tightly cased wells that penetrate the major water- bearing formations in the Floridan aquifer, July 6-17, 1961. Contour interval 10 and 20 feet, changing at mean sea level. [ ] Extent and distribution of flow areas vary with fluctuations of the piezometric surface, particularly in areas of heavy Relatively small areas of artesian flow are not included immediately adjacent to and paralleling the coast and many of the major rivers and springs

Jan 1, 1966

By Wolfgang Baum

The selection of roasting technology is a complex task which is primarily dependent on the ore mineralogy. Key roasting parameters are directly linked to mineralogical characteristics of the feed and vary considerably between different ore types even in the same deposit. In addition to sulfide refractoriness, other refractory conditions frequently exist. Together with various mineralogical features of the feed, they may complicate roasting testwork and process design. For most roasting scenarios, the critical economic factors are gold recovery, capital cost and environmental performance. This paper will show how these economic factors are influenced by the mineralogical ore characteristics.

Jan 1, 1992

By Laura L. Damon, Alastair McNeillie

The use of calcium peroxide for enhanced heap detoxification has been investigated on the laboratory scale using heap leach columns. The addition of calcium peroxide to the ore prior to leaching resulted in a significant increase in the rate at which the leached ore was detoxified and this led to an overall decrease in the total heap leach cycle time. This decrease could allow a minesite to increase the ore throughput or gold leaching time and generate additional revenue. The process is of particular relevance to reuseable leach pad operating though pennanent pad systems could also benefit.

Jan 1, 1992

By Jeffery S. Thompson, Harry Hinds

Recent advances in the development and application of the DuPont Activator Technology are discussed. Activators are catalysts of gold dissolution in cyanide solution. Plant testing of this technology in the vat leach circuit of the Homestake mine in Lead, South Dakota, showed increased gold recoveries ofup to 5%. Homestake has licensed the technology for this application and is in the process of full commercialization. Results from testing additional ores on a laboratory scale are also presented. These results indicate this technology will also increase leaching at much lower cyanide concentrations while achieving the same gold recovery.

Jan 1, 1997

By Brian T. Field

Development of cost effective technology for whole ore roasting of refractory gold ores is an important requirement to increase recovery rates as ore grades become more carbonaceous and sulfidic in nature. It is important that the industry focus on the further development of cost effective, environmentally sound technologies to roast this ore. Traditional technologies have centered around bubbling and circulating fluidized beds with and without oxygen enrichment. Fuller Company has developed a process to flash roast refractory ores in its pilot plant with the R&D results, commercial scale up issues, and indicative economics discussed herein.

Jan 1, 1993

The bromine review did not arrive in time for publication in the June issue. Bromine production in the United States during 1992 amounted to 171 kt (376 million lbs), a 453-t (I-million lb) increase from 1991. Data compiled by the US Bureau of Mines indicates this increase was due mainly to greater exports of elemental bromine and bromine derivatives (flame retardants). Exports increased despite the economic slowdown in Europe and Japan. The United States remains the world's largest bromine producer, with about 42% of the total. Israel is ranked second, followed by the United Kingdom, the former Soviet Union and Japan.

Jan 1, 1993

By H. Nematollahi

Numerous magnesite deposits are found in the south part of Khorasan state, east of Iran. During the past few years, production of high-grade magnesite ore was possible only by using selective mining method. The decreases of high-grade ore imply upgrading of the low-grade ore. To do so, the objective for the first phase is to obtain a material which contains less than 2.5% SiO2. The present study was carried out based on three different samples. The results obtained in laboratory indicate that the direct flotation of magnesite by fatty acids led to acceptable result.

Jan 1, 2003

By Marshall A. Koval

The future of mining in the United States is in question. The cumulative effects of federal, state and local environmental legislation threaten its survival as the cost of compliance skyrockets. Legislation has created pol ari zat ion between government and industry followed by court action, further increasing costs and delays on permitting and remediations. Regulations often call for excessive and rigid requirements that result in unrealistic compliance goals costing tens of millions of dollars. The costs often exceed the value of the remedy. A growing concern is that proper scientific methodologies and engineering practices are being sacrificed because of political and public pressures.

Jan 1, 1991

By Chris Cox, David Green

Outokumpu has developed the HG or High Grade flotation cell over the past decade. This machine gives upgrading and selectivity performance superior to conventional mechanical cells while maintaining their simplicity, ease of operation and recovery characteristics. The HG design is available in a tank cell configuration which provides a number of benefits in plant design and operation. This paper will describe the HG Tank Cell and the "Virtual Column" concept. Results are given from the operation of the HG Tank Cells at Lac Minerals - Est Malartic in Quebec, Canada. Further discussion of applications for gold recovery is also provided.

Jan 1, 1993

By D. Zaharaki

The optimisation of geopolymer synthesis was studied bymixing low Ca electric arc ferronickel slag with kaolinite, sodium silicate solution, sodium hydroxide pellets and water. The pulp was heated at low temperatures and left for curing at room temperature. Through statistical analysis it was shown that the factors with the most statistically significant effects on the compressive strength of the produced geopolymers are slag particle size and aging period. XRD and FTIR studies provide useful information regarding the progress of geopolymerisation mechanisms. Finally, studies regarding the durability and structural integrity of the produced geopolymers were also carried out.

Jan 1, 2006

By C. G. Anderson

Over the past 15 years numerous pressure oxidation plants for pretreatment of gold ores and concentrates have been installed throughout the world. While, this technology is now established, it suffers in term of the complex engineering and operational characteristics inherent in utilization of high temperatures (i.e. up to225°C) and high pressures (i.e. > 400 PSIG). This paper outlines the application of an industrially proven pressure leaching methodology utilizing nitrogen species catalyzed pressure leaching and alkaline sulfide gold leaching. As such, it stands as an economic and engineering advancement in pressure leach treatment of gold ores and concentrates.

Jan 1, 2003

By A. D. Davis, D. J. Dixon, J. L. Sorenson, C. J. Webb, S. Dawadi

Limestone-based material appears to be an effective arsenic removal process that has great potential for source reduction in drinking water. Limestone-based material offers several benefits to the drinking water community: 1) reasonable removal efficiency as compared to material cost, 2) broad geographic and water system applicability, 3) compatibility with other water treatment processes, 4) ease of technical use, and 5) low-cost disposal in ordinary landfills. Batch and column experiments have evaluated the removal efficiency of several limestone types. Additives and material alteration have increased the removal efficiency. Granulation of powdered limestone as a filter media currently is being investigated.

Jan 1, 2006