Search Documents

By Mark C

Designing coal pillars to provide resistance against overburden loads has long been an aim of rock mechanics engineers. The need for accurate pillar strength models has become.more urgent as greater overburdens are encountered and pillar sizes grow larger. Current pillar design models differ widely in their predictions of the trend in pillar strength with increasing pillar width- to-height ratio. The goal of this paper is to evaluate current pillar strength theories, using a comprehensive data base of stress measurements from coal pillars. The stress measurements indicate that coal pillars maintain relatively high stresses near the ribline, and that the stress gradient within the yield zone can be approximated as a straight line. Several problems are identified for further research, including calibration procedures for different types of stress cells, strain softening behavior in the yield zone, and measurement of stresses in the cores of very wide pillars.

Jan 1, 1992

The Mt Todd Project is located 42 km northwest of Katherine in the Northern Territory. The identified mineral resource estimate for the Batman gold deposit is 66.7 million tonnes (Mt) grading 1.4 grams/tonne (g/t). Proved and Probable Ore Reserves total 42.3 Mt grading 1.5 g/t. Orebody definition and reserve estimation is based on extensive percussion and diamond drilling. Exhaustive bias analysis comparing grades produced from different drilling techniques has been undertaken. Similarly, detailed check assaying programs have been run to validate grade data produced by commercial laboratories used during the exploratory drilling phase. Significant biases were established from both studies and appropriate 'corrections' were made to drillhole databases prior to final resource and reserve estimation. 3D geostatistical modelling has been utilised for resource and reserve estimation, with specialist consultants contracted for this work. At all times, interpreted geological controls on mineralisation, provided by

Jan 1, 1994

By Hematian J

A high horizontal stress field has significant effect on the stability of underground roadways and influences the design of a support system in this environment. The high horizontal stresses at E1lalong Colliery, NSW, Australia provided the environment for this study. Samples of coal measures 'rock were collected and tested to determine their mechanical properties. The lithology, stress state, geometry and conditions prevailing in particular areas of the mine were obtained from geotechnical reports available at the mine and by field observation. The results of a series of finite element models constructed and tested under various conditions provided a basis for comparison with field observations. Analysis of the results indicated sufficient correspondence to provide a basis for the proposed design of an optimum support system. It is not suggested that finite analysis provides 'exact answers', but it does show the relative importance and interaction of various parameters.

Jan 1, 1995

By Lynce AJ

A method has been developed for the prediction 'of 'the- . performance of a multi-stage grinding=cyclone classification circuit of any degree of complexity on any ore for a wide range `of operating conditions, The-.method involves ;the. s` inu ation b'f the circuit on a digital computer by means of. matheinatical' models ":bf the"' individual units:, the. development of which is- also discussed'., At present, in order to establish 'the!'" charac'teristtics of they ¦ore- and the machines. in mathematical terms;. it is necessary to know'the performance of a , simpl,.e. ; system on tri.e ore - for! one known ,,feed rate and.fe.ed s,l-zing, analysis. ' ,Fiiither work on :the- separate identification 'of the terms defining the characteristics of the ore and the machines may permit the method to be, applied directly to the cj.4ta,derived from small scale tests on ores,

Jan 1, 1964

Stope control information at the C.S.A. mine is obtained by diamond drilling inclined holes from within the stapes. Practical mining outlines are determined from complicated ore contours by a joint mining engineering and geological study. Production holes to achieve this outline are individually marked up and checked. Stope control also extends to selective mucking of ore mixtures for metallurgical reasons and to marginal ore and waste mixtures for economic reasons.

Jan 1, 1969

By Ritchie IC

Spiral separators have been used to treat heavy mineral sands in Australia for some thirty-five years. They were used as the primary treatment method until the advent of the Reichert cone, which largely replaced them, due to its compact design and relative ease of operation. Spirals continued-to be used as the final cleaning stage before dry separation of the heavy minerals as they remained the most efficient separator for this purpose.

Jan 1, 1986

By Fletcher G

This paper will outline the design process, and the constmction and rehabilitation techniques proposed for the external waste dumps associated with the mining of the Wolfang Basin coal measures.The basin is located to the north of Clermont and immediately west of the Bowen Basin in Central Queensland, Australia. Development of the Clermont Coal Mine is planned for the mid-1990s after adequate sales commitments are obtained to allow the project to proceed.

Jan 1, 1992

By King ND

This paper presents an economic study comparing two gold recovery processes, zinc precipitation (Merrill-Crowe) and carbon-in-pulp (CIP). Capital, operating, and gold losses costs from an actual CIP plant study are compared to costs developed from a hypothetical Merrill-Crowe process flowsheet. ' Results indicate an overall economic advantage to CIP over Merrill-Crowe for plants processing slurries within the range of the five gold solution grades selected for this study.

Jan 1, 1982

By Cole RT

The cultural ages of man have been defined in terms of smelting and hence as a prerequisite, mining for example the iron age and the bronze age. There could be no separation of the man from his role as the technologist (miner/ smelter) for his early metal working efforts were to enhance survival. In the millenniums since, the artisan specialist developed and the technologist emerged. The process is a sort of technical natural selection. From the generalist hunter, gatherer, miner, metalworker we advanced over the centuries with great 'steps for mankind' to the series of specialists each largely intent on securing his/her technical functions from the curious assaults of other tribal members. The relevance of all this to the theme, 'Past, present and future of the Victorian mining and metallurgical industries', is simply that people have always, and will always, be the moving force in our industries. It is the effectiveness of people now and in the future that this paper addresses.

Jan 1, 1982

By S Leary

Diamond drilling since early 2006 has identified an epithermal gold-silver (Au-Ag) deposit beneath 140 m to >400 m of cover. The Fruta del Norte discovery had an inferred resource estimate of 58.9 Mt grading 7.2 g/t Au in October 2007. The mineralisation is hosted by Mid-Late Jurassic andesite and andesite porphyry in a regional fault zone beneath mainly post-mineral but in part syn-mineral Late Jurassic cover. The intermediate sulfidation-style deposit formed before and in part during deposition of epiclastic cover in the fault related pull apart basin. In addition to its size and obvious economic importance, the widespread occurrences of visible gold and exquisitely preserved epithermal textures will make Fruta del Norte an important learning tool for explorationists seeking epithermal mineralisation in theAndes and elsewhere. An EXTENDED ABSTRACT is available for download. A full-length paper was not prepared for this presentation.

Jan 1, 2008

By C Rees, M Predebon, J Denney

It has been said on many occasions that æthe future of the mining industry of Australia, and indeed the world, lies in the hands of the studentsÆ. As a student, this can be a daunting, yet very exciting, statement. If nothing else, it is a direct challenge to the student body of the mining industry to take responsibility for its direction æafter 2000Æ. However, for the students to embrace this challenge, some responsibility must be borne by the universities and the industry itself to provide some direction and encouragement. Perhaps, therefore, the real challenge is to find the right balance between students, industry and education to best prepare the students for a career in the mining industry. The future industry will demand students who are capable and willing to adapt to change and technology and able to exert the vision and leadership required to ensure the mining industry continues to thrive well into the next century.

Jan 1, 2000

BHP World Minerals (BHP) commenced development of the Cannington exploration decline in 1993 using Peabody Resources LimitedÆs Mining Services Division (PRL) as the contractor. Approval was given in 1996 to complete the mine development and bring the mine into production in 1997. The total mine development at Cannington by PRL has included 14 km of headings, 1040 m of shaft sinking for ventilation and ore hoisting and 990 m of raise boring for ore passes and vent rises. Hard money schedule of rates contracts were used for mine development from 1993 until early-1997. This took the mine development down to 570 m below the surface and developed six levels. Because of significant risks, the final phase of the mine development was completed in 1997 under a partnering agreement. This paper examines the factors considered in making the change to partnering, the issues involved in negotiating the partnering agreement to complete the Cannington mine development and the outcomes of the agreement.

Jan 1, 1998

By S C. Dominy

The Minerals Education Australia program is offering a tertiary learning environment for the global mining industry. The Minerals Council of Australia has instigated this initiative, which is run by the Minerals Tertiary Education Council. The program is a pioneering partnership between the Australian minerals industry, Australian governments and key Australian universities. It is designed to deliver key undergraduate and postgraduate courses for tomorrowÆs minerals industry professionals in the fields of geoscience, mining and minerals engineering and metallurgy. The flagship course for geoscience professionals is the G3 Masters program. This is a coursework-based degree supported by the Minerals Tertiary Education Council, and a partnership between James Cook University, the University of Tasmania and the University of Western Australia. These partners represent the leading-edge providers of minerals geoscience education and R&D in Australia. The G3 program provides the full spectrum of post-graduate training skills in exploration, mining and economic geology topics.

Jan 1, 2003

By T E. Jeffries, M Zentilli, J STguel, C C. Wilkinson, B G. Rusk, V H. Vry

Laser ablation Inductively Coupled Plasma Mass Spectrometry (ICPMS) analysis of fluid inclusions trapping mineralising solutions in major porphyry-copper deposits indicates that copper concentrations can reach 103 - 104 ppm in both dilute, CO2-bearing fluids and in high salinity brines. Non-Cl transport of Cu is implicated. Au has been determined at 0.2 - 0.4 ppm in the low salinity fluids and may be co-transported with Cu. In contrast, high concentrations of Fe, Mn, Zn and Pb are only attained in brines and correlate strongly with Cl-indicating chloride transport. Physical and/or temporal separation of these fluid types can therefore producemetal fractionation within porphyry systems. Evidence concerning the behaviour of Mo is less clear but brine transport appears to be favoured; phase separation is one mechanism that may account for the fractionation of Mo from Cu and the formation of quartz-molybdenite veins. An EXTENDED ABSTRACT is available for download. A full-length paper was not prepared for this presentation.

Jan 1, 2008

By A R. Butcher

Gold deportment and ore characterisation studies are key tools in gaining an appropriate understanding of complex gold ores for process development and optimisation. These studies have historically involved imprecise chemical methods with slow and costly optical microscopy for gold identification. The traditional approach requires highly skilled petrographers, is prone to human error, and is not scalable, reducing the usefulness in practical analysis. The proposed methodology utilises a decision tree and knowledge base in a staged approach to gold ore characterisation, building up progressively more detailed information about the sample mineralogy, gold deportment and key mineral properties, as the process is followed. Whilst the automated QEMSCAN« system is used for mineral and gold identification, interactive and focused data analyses are used to give more efficient and accurate results. This is complemented by smart sample preparation and chemical methods to enhance and validate the data, making the staged approach methodology reliable, scalable and therefore practical and economical.

Jan 1, 2007

By P Alspach, R Buxton, C Morgan, C Ross

Mining companies worldwide have an increasing interest in restoring indigenous ecosystems following mining. Low levels of plant nutrients and organic matter, pH extremes, heavy metals, physically challenging media, and difficult climatic conditions all hinder revegetation of steep rockdump slopes. Our techniques use colonising pioneer plants to accelerate natural soil development and plant succession processes on minesites that are difficult to revegetate with locally sourced plants by traditional techniques. Suitable treatments and pioneer species must first be identified for each rocktype. Field trials at the Stockton Coal Mine in Buller have shown that successful acceleration of moss and pioneer plant establishment is possible. Best plots showed a mean of 15 per cent moss cover and 3.3 per cent vascular cover after 12 months compared with 0.1 per cent and nil respectively for controls. Techniques have been extended to field-scale trials, using hydroseeders and dryblowers. These techniques show potential for practical land rehabilitation, whilst conserving local biodiversity.

Jan 1, 2003

By G T. Hefter, P Singh

Sulphur dioxide oxidation is an attractive alternative anodic reaction to the evolution of oxygen in copper electrowinning. Accordingly, the electrochemical oxidation of SO2 in aqueous 1.0 x 10-1 mol/L NaClO4 has been studied at pH 2.3 using platinum and glassy carbon electrodes. On the platinum electrode SO2 oxidation occurred on the forward scan at 0.96 V and on the reverse scan at 0.63 V. For GC, a single SO2 oxidation peak occurred at 1.40 V on the forward scan. SO2 oxidation on both electrode substrates was hampered by oxide layer formation. The electrode could be reactivated however, by oxide layer reduction. Although reactivation was most successful for platinum, SO2 oxidation on platinum is quite complex, with this evidenced by the reverse scan anodic peak. Glassy carbon shows simpler behaviour and thus, is the preferred substrate for SO2 oxidation.

Jan 1, 1998

The Western Australian Mining and Petroleum Research Institute (WAMPRI) was established in 1981 by the Western Australian Government as a funding and co-ordinating Institute to foster research into the mining and petroleum industry within this State. To June 1984, the Institute has sponsored 34 projects with a total notional value of $2.5 million and an actual cash commitment of $1.5 million. Strong support for WAMPRI has come from Industry with 60 companies contributing half the money needed for the research grants.The 34 WAMPRI projects funded so far cover all aspects of the mining and petroleum geosciences.Several WAMPRI projects are concerned with gold including processing technology and the development of exploration models and techniques, they are providing successful results.Although well supported by Industry there is a surprising lack of applications being submitted to the Institute in the area of mining engineering, where it is felt there is much scope for research projects.

Jan 1, 1984

By Premur V

In industry and power production and distribution large quantities of fine wastes are produced. These are above all fly ash and phosphogypsum. Attempts are made to use them as secondary raw materials in industry and construction. Since they contain dangerous and harmful components or are nonhomogeneous their direct application is limited so that they are treated as waste. This paper reports on tests conducted with the aim of agglomerating the mentioned fine industrial wastes by pelletisation. The aim of this resarch was to obtain agglomerated product suitable for handling, transport and dumping. At the same time efforts were made to incapsulate harmful components by producing pellets with protective shells. Next, pellets without binders and with different binders were produced. Strength, resistance to freezing and solubility of pellets were tested. All the fine industrial wastes under survey were found to be suitable for pelletisation. The utilisation of appropriate binders ensures pellet strength required for safe handling and ecologically sound deposition of pelleted Material.

Jan 1, 1993

By Staude W, Rosser A

Due primarily to the publication of the Fitzgerald Report the impact of taxation on the mining industry and the amount of taxes actual- ly paid by the industry have become items of intense debate. However, the discussion has been governed more by impassioned rhetoric than considered logic. It is equally as wasteful to the economy for the mining industry as a low cost efficient export earner to be punitively taxed, as it is for the industry to be given excessive taxation assistance. A comparison of the effect of five tax- ation policies on the cash flow of a capital intensive mining project is presented. The policies considered are Liberal 1969, Liberal 1976 with and without the coal levy, Labor 1975 and Labor 1976. The mining project used in the analysis is modelled on published estimates for the proposed Nebo coal project. The analysis is equally applicable to any large mining or petroleum development.

Jan 1, 1977