Search Documents

Mining is still a significant economic activity within the Hauraki District. The Martha project is particularly significant. Estimates are that in the order of 850 direct and indirect jobs are derived as a consequence of the Martha project within the Waikato Region. The Resource Management Act 1991 (RMA) is New Zealand's primary piece of environmental legislation. It sets out to provide the framework for the control of the use, development and protection of almost all physical and natural resources. Minerals are excluded from the sustainability requirements of the legislation but as mining invariably involves the use of land, all the other elements of RMA apply. The Council's role in dealing with mining changed with the introduction of RMA. It became responsible for administration of those matters that fell within the functions set out in section 31 of the RMA in respect to existing authorisations. Mineral development needed to be considered in the development of the District Plan that the Council is required to prepare. Implementation of the Act has been a challenge for not only local government but for many industries and resource users since it came into force in 1991. There have been, and are, differing views on both the way it is administered and its intent. The Hauraki District Council has been at the forefront of some of the challenges that are a consequence of the Act. Its reactions to these challenges have been consistent. It treats mining in the same why it treats any other industry. At times this approach has not been understood and without challenge from sections of the community.

Jan 1, 2000

By Neill T. J, Howarth D. F, Malcolm J. McPhersqn

For many years Isa Mine has seen the need for a continuous mining machine which will economically cut hard rock. Tunnel borers are unsuitable due to the size and inflexibility of the machine and the shape of excavation mined. The design of roadheader type machines will not permit the use of the necessary cutting technology. in 1983 a joint project was undertaken by The Robbins Company and Mount Isa Mines Limited to develop and to trial a machine suitable for cutting hard rock in an operating mine. The project was based on the proven technology of raiseboring applied to horizontal development. The Mobile Miner was fabricated and trialled in a disused quarry in the U.S.A. during early 1984. Following these trials, the machine was transported to Mount Isa and commenced mining in September that year. The initial duty was to continue the development of a decline commenced by conventional mining for a conveyor system to serve the deeper southern areas of the 1100 copper orebody. This system will permit direct tipping of copper ore to a new crusher complex and conveying of the - crushed ore approximately 2 kilometres to the central hoisting shaft facilities. The Robbins Mobile Miner MM120-3001 uses a vertical rotating cutting wheel mounted on a horizontal swinging boom to excavate a nominally rectangular shaped heading. The cuttings are collected on an apron and conveyed back through the machine. The resulting excavation is smooth-walled with no blasting damage to the surrounding rock. This provides a safer working environment than does conventional drill and blast development mining. Ground support requirements are considerably reduced.

Jan 1, 1986

By Stein A

The general mechanism of recrystallisation for cold worked metal is well established, and need be only briefly summarised with a few references to recent articles which clarify minor points. The types of extension, whether by stretching, drawing, hammering, rolling, etc., do not alter the general principles (1), although quantitative results may differ somewhat, particularly with regard to differences between the surface and interior of samples.These principles can be summarised as follows: The first stage in annealing is a recovery (sometimes known as relaxation) of physical properties such as hardness, elongation, etc., without any appearance of recrystallisation; the second stage involves a further alteration in physical properties, accompanying the formation of new recrystallised grains which replace the original structure; a possible third stage involves an increase in the grain size of the completely recrystallised structure by absorption of smaller grains by larger ones. These three stages will be referred to as recovery, recrystallisation, and grain growth. Depending on conditions, the three stages may be clearly marked or may occur more or less simultaneously.For a given annealing temperature, cold deformations below a certain amount fail to give recrystallisation, and the final structure consists of the original grains which have recovered and possibly become more equiaxed. When a certain deformation, critical for that annealing temperature, is given, recrystallisation can occur, and will give the maximum recrystallised grain size.Increasing deformations beyond this give progressively smaller grain sizes.For each material there is a minimum recrystallisation temperature, below which recrystallisation will not occur whatever the deformation or time of annealing. For a given deformation there is a temperature, critical for that deformation, below which recrystallisation will not occur, and above which it will take place with increasing rapidity.

Jan 1, 1947

By A McRae

Much of western New South Wales is characterised by an extensive regolith formed during more than 60 million years of exposure, weathering and erosion. This cover includes intensely weathered in situ regolith and superimposed transported materials of variable thickness, commonly in complex palaeochannel systems. Mineral exploration in this region has been considerably hampered by the cover, which can complicate or maskgeochemical anomalies and also obscure geophysical signatures. A detailed multi-disciplinary study of part of this region, centred on the Cobar-Girilambone area has demonstrated a methodology for exploring through this regolith. The approach involves regolith-landform mapping to establish the main landscape and palaeolandscape elements and to determine the nature and spatial occurrence of different regolith materials. By combining knowledge of the surface distribution of different regolith-landform units with available 3D information on the regolith and geophysical data it is possible to construct simplified derivative maps or exploration ægoÆ maps, which can be used to advise appropriate exploration strategies or help interpret acquired exploration data. This study has also established the major regolith controls on geochemical dispersion and determined key background element associations. These regolith-related element associations can result in highly variable background levels for many trace elements and need to be understood and factored into the analysis of geochemical data for different regolith sampling media. With better knowledge of the regolith it is possible to select the most appropriate exploration techniques and sampling media for a given area, as well as apply appropriate normalisation procedures to the acquired data. Exploration success can be greatly improved by using many existing techniques in æregolith smartÆways.

Jan 1, 2004

By G K. Robinson

Variations in many aspects of physical and chemical grade are often of concern to mining operations and mineral processing plants. In most circumstances these amounts of variation are predictable. At the time of planning new operations, we should be able to predict the amount of sampling and testing variation which our sampling devices, laboratory procedures and on-stream analysis devices will achieve. We should know how well our stockpiles, reclaimers and bins will homogenise material (or whether segregation will actually increase the amount of variation). We should be able to predict the amounts of variation that will occur on the important time or tonnage scales at the crucial p oints in our proposed operation. And once these amounts of variation are reliably known, mine planning will seem a little bit more like dealing with known knowns rather than like dealing with unknown unknowns.The first step towards quantifying amounts of variation for planned operations is to assess amounts of variation for existing operations. How many operations have estimates of amounts of variation in their databases? How often are people able to partition amounts of variation into amounts due to sampling error, amounts due to sample preparation, amounts due to assaying, and the amount of real variation in the stream of material?CITATION:Robinson, G K, 2012. Making sure that the amount of grade variation is a known known, in Proceedings Project Evaluation 2012 , pp 159-162 (The Australasian Institute of Mining and Metallurgy: Melbourne).

May 24, 2012

In order to meet the increasing demand for coal for their Newcastle Steel Works, the Broken Hill Pty. Co. Ltd., on June 5, 1937, approved of a scheme to sink a tunnel to the Victoria Seam at their Burwood Colliery. This seam was virgin at this locality and lay nominally horizontal at a depth of 320ft. vertical from the surface.For the purpose of despatch of the coal produced it was decided that the tunnel be equipped with a rubber belt conveyor system.This was a comparatively new departure in Australia, and, indeed, was one of the first installations of its kind in the world, designed to raise coal from considerable depth by this means. Later the tunnel was extended to the Borehole Seam, which lay nominally horizontal at a vertical depth of 600ft. from the surface. The whole installation is the subject of this paper.In planning a project of this kind, consideration had to be given to the following:-1. Location of tunnel with regard to existing surface railway sidings and shafts.2. Ultimate tonnage required.3. Width and construction of belt.4. Speed of belt.5. Inclination of belts.6. Number of belts and design of equipment.7. Cross-sectional area of tunnel.8. Inclination of tunnel.9. Surface drainage.10. Type of equipment for drifting the tunnel.11. Method of ventilating the tunnel during sinking.After the general layout and design of the scheme had been prepared it was decided that tunnel drifting would begin immediately and that the belt installation, together with the feeder plant, would be detailed and manufactured by the time the drift...

Jan 1, 1947

By P Gnnther, A M. van Niekerk

Coal mining operations in the Upper Olifants River Catchment in the Mpumalanga Province of South Africa are challenged with the increasing production of excess mine water that cannot be fully managed by existing practices of pollution control at source, recycling, and reuse on mining sites, storage and limited release to the natural water course. In contrast to this, the Olifants River Catchment is experiencing water stress and insufficient water is available to satisfy all water quantity and quality requirements for future industrial and municipal growth. It is estimated that the catchment has a deficit of 192 million m3 per annum if the reserve water requirements are taken into account. The future increased water requirements can be met by water transferred to the Olifants River Catchment from adjacent catchments. The cost of transferred water is likely to be substantially higher than the current cost of water supplied to local municipalities, commerce and industry. BHP Billiton and Anglo Coal Corporation are working together to jointly implement water management strategies that will contribute to the achievement of in-stream and dam water quality and aquatic objectives for the catchment. Consideration is now being given to the treatment and beneficial use of excess mine water. This will inaugurate a new era for the coal mining industry in South Africa, in which a pollution threat to the water resources in the Upper Olifants River Catchment is converted into a water source for beneficial use. Three potential mine water reclamation and reuse schemes have been identified and this paper details the technical, institutional, legal and financial considerations in the implementation of these schemes.

Jan 1, 2006

Thrusting is well documented in the Finisterre/Sarawaget moun- tains, the Kainantu-Waf district and in the Highlands between the Kubor Anticline and the Ramu Valley, Papua New Guinea. The thrusts trend NW and involve rocks ranging in age from Permo-Triassic to Plio-Pleistocene. Evidence from the Finisterre/ Sarawaget mountains demonstrates that a major phase of thrust- ing commenced in Pliocene times and continues today. Palaeostress analyses is a sensitive technique for assessing the kinematic history of faulting. The picture gained from the Finisterre/Sarawaget mountains, the Kainantu district and be- tween Kundiawa and Keglsugl is simple, involving a north to northeast ol. Local complexities between the upper Chimbu Valley and Brahmin indicate extension on a NW-N trend. The simplicity of this anlaysis, which accords with seismic and geo- detic strain data, shows that the major faulting in Papuan Orogen is no different from that in the Papuan Fold Belt; that the Papuan Orogen and the Papuan Fold Belt together form a young thrust- fold complex; and that such structures as the Kubor Anticline may be fault-bend folds. Recognition of the obduction of the Finisterre/Sarawaget reef/ volcanic complex over the Australian plate, the gas seeps in the Ramu Valley and foothills of the Finisterre/Sarawaget Mountains, oil seeps in the Goroka and Kundiawa regions, and our interpre- tation of the PNG Orogen as part of the Papuan Fold Belt indi- cates unexpected probability that the PNG Highlands are pro- spective for hydrocarbons.

Jan 1, 1997

By D S. Clarke, K B. Sporli

Structure is an important control in the localisation of gold mineralisation in epithermal systems. There has been, however, only limited investigation of the structural elements involved; such a study is currently directed at the gold deposits of the Coromandel Volcanic Zone (CVZ). Here, mineralised veining and brecciation ranges up to tens of metres in thickness. Dips of veins are mostly steep, but not vertical, and there is a significant number of low angle veins. The structural control of epithermal deposits may be considered on four scales. At the mega-tectonic scale, pre-volcanism fault patterns mostly relate to separation of the New Zealand micro-continent from Gondwana. The major structural controls on mineralisation at this scale, however, are associated with the volcanic arc processes responsible for the CVZ. Post-mineralisation faulting are linked to the Hauraki Rift and the Colville Ridge-Havre Trough system. Regional scale faults controlling the distribution of gold deposits are the product of these tectonic events; much of the faulting may relate to rifting and calderas, but further work is required to demonstrate this. Detailed study is also needed on vein systems at the prospect scale to validate models of brittle deformation responsible for such systems. Evidence that a variety of structural mechanisms dominated in different deposits is found at the vein scale, with Coromandel gold deposits being classified according to their different styles of vein-fill texture.

Jan 1, 1990

By Emerson D. W

The search for economic mineral deposits is becoming more difficult as exploration goes deeper in the established mining camps and spread out to the surrounding covered areas, which may have an `overburden' some hundreds of metres thick. Geophysics is finding an ever increasing role in such exploration. When the target is zinc, the task often becomes even more difficult since sphalerite, the most commonly mined mineral, is non-magnetic, resistive, and relatively light compared to other sulphides. Fortunately, sphalerite commonly occurs in association with other sulphides, which are magnetic and/or conductive and/or heavy, thus most zinc-rich orebodies have at least one contrasting physical property to aid exploration. This paper presents the physical properties of sphalerite and other potentially important zinc minerals. Results of petrophysical measurements of samples from various zinc-rich ores are presented together with examples of geophysical surveys over a number of zinc deposits. The results show that the physical properties are not merely dependent upon the properties of the orebodies' constituent minerals. For example, the small (0.4 Mt) and low-grade (five per cent Zn + three per cent Pb + two per cent other sulphides) Flying Doctor deposit at Broken Hill, New South Wales (NSW) is much more conductive than the large (3+ Mt) and high grade (14 per cent Zn + five per cent Pb) Cadjebut deposit in Western Australia (WA). In the former case, tectonic stresses have

Jan 1, 1993

Modern, high-output, continuous process plant requires heavy capital expenditure and is exroected to achieve a high rate of return upon the investment made, thus its high utilisation is an economic necessity. Downtime is extremely expensive not only in terms of idle capital but also in terms of lost production and revenue. A sound maintenance management system can alleviate the problem of unscheduled stoppages and a key document in the maintenance system is the Work Order because it both initiates work and conveys maintenance control information back to the administrator. This key document must be supported by an information base that provides technical data, job procedures, spare parts, history and costing. To be effective this information must be easily and immediately available to all concerned. Computer technology has developed extremely rapidly over the last ten years and with it a wide variety of on-line computerised maintenance systems. Selection of the most appropriate system for a given industrial plant is not a straight-forward process. Computer requirements for hardware and software must be matched to the requirements of the maintenance system and such matching must be carried out in an ordered and rational way. At Kalgoorlie Nickel Smelter, time was taken to review the existing maintenance system, select, study and test the new computerised maintenance management package and plan its implementation. As a result, the initial target of equipment recognition has been achieved on schedule and within budget.

Jan 1, 1987

By A Williamson

The New South Wales Department of Mineral Resources objective is to use data and information to undertake a detailed analysis of incidents and accidents to identify risks so that the predictable can be foreseen and avoided. The Department of Mineral Resources has established a computerised database called COMET (COmmon Mines EnvironmenT) to capture information on accidents incidents, inspections, audits and accreditation in improving safety and environment performance. This data together with data from Coal Mines Insurance and WorkCover NSW is being used to provide trend and comparison information. The NSW Injury Risk Management Research Centre at the University of NSW has been engaged by the Department to collate and prepare a detailed analysis of the data. Through this process, five areas have been identified for further research. These being: electrical energy, mechanical equipment, work environment, hours of work, and contractors involvement accident and incidents. The paper covers: the establishment of a mix of performance measures for the industry to indicate whether the safety performance is improving; the provision of data to provide useful comparisons and benchmarks against which companies can compare performance; the development of positive performance measures; the findings and outcomes of the detailed analysis of electrical energy; shocks; the provision of information to industry; an outline how the data is being used to determine departmental; operational priorities; and future plans to undertake research into the other areas identified.

Jan 1, 2003

By Seymour D

The disagregation and privatisation of the mining and power gene ration operations of the former State Electricity Commission of Victoria has being taking place over the past five years. This has transformed the service provision to the new organisations and has resulted in major change to the working lives and professional relationships of thousands of Australians. The authors wish to take this opportunity to explore the issues arising as the program of privatisation of public assets continues. Changes within the workplace which resulted from the outsourcing of the 'investigation and design' functions and more lately as a result of privatisation of the operating, generating and distribution businesses are discussed. The responsibility of managers retaining the services of design engineers has changed. There is an added responsibility of contract administration and an increased focus on intellectual property and strategic issues. The way in which the sectors are adapting is discussed and future directions are explored. We welcome this opportunity to explore the changes in professional life which have taken place over the last five years in the Latrobe Valley Power industry. Engineers and earth scientists have a pivotal role in the continuing successful operation of the three Latrobe Valley Mines of the generation companies. The Mines' collectively excavate annually over 13 million cubic metres of overburden and 48 million tonnes of coal for delivery to mine-mouth power stations and for briquette manufacture.

Jan 1, 1997

This paper attempts to draw together the experience of over 30 years of research and practice in the United Kingdom on the rehabilitation of abandoned metalliferous mining wastes. The reliance on water when the mines were operating has implications for water quality and the techniques used to restore sites to alleviate the principal impacts of the mines. Drivers of reclamation included concerns about human health from wind blown dust and pollution of watercourses as well as perceptions of dereliction. Techniques of reclamation used involved removal of spoil from near to surface watercourses, capping of spoil, diversion of watercourses, use of impermeable membranes, prevention of surface sinks into underground workings and the use of constructed wetlands. The issues to be dealt with in mine reclamation have become more complex and sometimes diverge. The schemes in the 1990s described have been effective in dealing with pollution from spoil heaps and small but significant adit discharges; however, significant issues, particularly those of large flows of polluted water from mine sites, still need to be dealt with. Although the paper describes the legacy of mining, which largely finished in the late 19th/early 20th century, similar issues but on a larger scale are to be found in more recent mining, for example Eastern Europe. In many of these areas minerals still remain to be won and dealing with this legacy may fall on new mining developments.

Jan 1, 2006

By Eoffe SW

The wide application of computers in beneficiation plants has resulted in the creation of a number of complex automatic control systems at all stages of ore dressing processes. To create such systems it is necessary to solve complex problems of analysis and calculation. The application of computers to solve these problems demands development of simple and effective methods of investigation and simulation of ore dressing process dynamics because all the known methods are complicated in usage and cannot guarantee the desired accuracy and quality of process control. A new grapho-analytical method of investigation and calculation of ore dressing flow sheet dynamics, worked out by the authors of this paper, is based on proportion method development and is used to construct dynamic characteristics of the investigated processes. It is possible to use the given method for investigating benefication schemes with flotation machines having non-linear static characteristics and circulating loads. The suggested method of investigation of concentration flow sheet dynamics allows us to obtain dynamic characteristics of technological process parameters in both linear and non-linear systems. Moreover, the final result can be obtained without labour consuming analytical calculations by a simple graphical construction based on the static characteristics of the known equipment and processes.

Jan 1, 1993

By Parer W. R

During the last fifteen years there has been a marked change in the demand and supply patterns of coking coal. The world demand, predominantly Japan, has increased from 23 million tonnes of world export/import coal in 1960 to an expected total of at least 100 million tonnes by 1975. In the last ten years Australia has been the main beneficiary in the growth of the export coal trade. This has been brought about by its proximity to Japan and its large econ- omically mineable reserves of coking coal. A feature of the recent coal development in Australia has been the requirement of companies in new areas to provide massive capital for infrastructure costs. The ability of the Australian coal industry to retain a large share of the world export market depends to a large extent on reasonable costs to transport coal from mine to the market place. In some areas of Australia this means that railway lines, loading and unloading facilities, and ports will have to be up-dated at substantial costs. On the long haul to Europe the recent increases in the prices of bunker fuel have made the price of coal less competitive when compared with sources

Jan 1, 1974

By M Bezzina

In 1995 Standards Australia International Limited æSAIÆ published a risk management standard titled AS/NZS 4360 Risk Management. It was the first such standard published by a recognised formal standards body anywhere in the world and it put Australia at the leading edge of the risk management discipline. Many Australian and international organisations have utilised the risk management standard and it is one of SAIÆs most important and popular standards. Since its publication in 1995, the risk management standard has gone through a major revision in 1999 and is currently undergoing another such review, which is due for completion in 2004. This paper will chart the application of the standard within certain key organisations since its inception in 1995. A brief overview of the methodology behind AS/NZS 4360 will be presented as well as an overview of supporting and related standards. It is prudent to base risk management and other management system issues on existing and tested standards rather than creating new proprietary approaches. Examples of areas in which the risk management standard might be applied in the mining industry are given, subject to the specific operations of each company: technical, commercial, environmental, informational, and safety and regulatory.

Jan 1, 2003

Optimising a mining or a quarrying operation about the overall cost is quite a challenge as there never is a situation where we have exactly the same conditions regarding rock properties, explosives' performance, mining equipment or evironmental restrictions. The amount of endless influencing parameters and variables make the evaluation process difficult. The enormous progress we have seen during the recent two decades in computing has however significantly increased our ability to evaluate and process the information gathered, and refine our existing prediction models. Refined models demand an increasing volume of good quality information to show reliable conformity with reality. There is a great need for co-operative work in the mining and quarrying society if we shall be able to screen all available data, systematically find the key-parameters influencing the results and to build robust scientific models. No organisations today have all the skilled people needed or can afford to hire the necessary specialists in all the overlapping branches. This paper highlights some on-going work where the Dyno Explosives Group is adding some new pieces to the giant jigsaw puzzle representing the ultimate model of the mining and quarrying operations we all of this society would like to see completed.

Jan 1, 1995

This paper describes an investigation of the sampling problems which contributed to erroneous Concentrator production forecasts at the mining operation of Bougainville Copper Ltd (BCL) in the North Solomons province of Papua/New Guinea.Reference figures provided by independently verified commercial shipment data demonstrated the existence of a bias in the calculated Concentrator production; the challenge was to identify systematic errors in each of the contributory measurements (feed tonnage and feed, tailings and concentrate grades).The uncertainty surrounding specific sampling and measurement errors precluded optimum metallurgical control and performance of the milling circuit, encouraged disputes about the difference between Mine versus Concentrator production estimates, and cast some doubt on efforts to follow political guidelines concerning a maximum feed tonnage or recovery oriented mill operating concept.An evaluation of routine results as well as specifically targeted test work identified the sampling errors associated with measured individual parameters.The emphasis in this report is on the procedure for quantitative error assessments.The measured performance of a mineral dressing plant is subject to a systematic error balance which can be derived from the more familiar weight and metal balances such as the two- or three-product formula.The resulting equations are generally valid, and they are applied to the measurements obtained at BCL's Concentrator to illustrate the method.

Jan 1, 1976

Elimination of zinc by the reduction of iron works dusts is examined. The process consists of blending, filtration, drying, balling, preheating and reduction in the rotary kiln. Dust slurries and dry dusts are mixed and stored in slurry basins and the blended slurry is filtered. In the balling process it is important to make green pellets which will withstand Thermal shock in the preheater and rotary kiln. Preheating to about 2000C is preferred to ensure effective use of coke fines in the blast furnace dust. The coke retained in the pellets accelerates the reduction rate. However, at the initial stage of the reduction the pellets become weakened and have to be heated slowly to prevent ring formation. In order to ensure zinc vaporization, pellets should be heated to a temperature of 1100-11500C in the kiln with injection of l ignite fines from the discharge end. Pellets having a degree of metallization of more than 90% and containing less than 0. 1% zinc have been obtained using a test kiln. The final pellet product is intended for use as blast furnace feed. A new plant with a capacity of 20, 000 tonne of dust per month is now under construct- ion and will be in operation next year.

Jan 1, 1974