Search Documents

By Michael J. Beus, Stephen Iverson

BACKGROUND A mine shaft is the lifeline to underground mines. Mine operators depend on safe, uninterrupted, and efficient movement of workers and materials. The shaft and hoisting system provides access to the network of openings used to recover the underground resource, provides vertical transport of miners and materials, and serves as an escapeway in case of an emergency. Accidents involving hoisting can be catastrophic. Such was the case in 1973 at the Markham Colliery in Derbyshire, UK when the conveyance overwound and fell to the shaft bottom, resulting in 17 deaths. Hoist and elevator machinery must meet the requirements specified in the Code of Federal Regulations (CFR), Parts 57 and 75. According to the Mine Safety and Health Administration (MSHA) data, many shaft-related accidents in the United States are associated with the hoisting cycle. MSHA statistics show that there were about 1500 shaft- related accidents in the 5-year period between 1992-1996. Most of these accidents resulted from the action, motion, or failure of the hoisting equipment or mechanism and involved movement of the conveyance which includes cages, skips, ore buckets, and elevators. A hoisting hazard may be characterized as an "unsafe hoist operating condition caused by insufficient or inaccurate information available to the hoist operator" (authors' quote). Earlier investigators have defined safety features and operating and maintenance standards for hoists, and reported on monitoring and control systems and sensors for hoists and conveyances [Farley, 1983; Ward, 19931. However, despite the considerable technological progress and hoisting control improvements in recent years, safety- related issues that require further investigation still remain. The hoist operator must constantly be aware of two important hoist-operating conditions: the position of the conveyance and the tension in the hoist rope. If this information is not available or is inaccurate, the hoist becomes unsafe. Current technology provides this information indirectly from sensors and indicators in the hoist room. However, unlike a building elevator hoistway, mine shaft hoistway problems often include: 1. poor ground conditions and excessive shaft wall and guide displacement; 2. rock bursts in deep mines (resulting in large rock movements and fragments blocking the hoist way); 3. water, ice, and salt buildup (impeding the smooth flow of the conveyance); 4. severe vibration from hoisting (resulting in loose guide support brackets, broken welds, or other alignment and conveyance mechanism malfunctions). The second issue relates to dynamic rope loads applied during normal winding, particularly during loading, acceleration, and stopping. Safety factors on wire rope are based on static load. They are artificially high to account for all cases of dynamic loads, even though the total load history on the rope (static and dynamic) during service is unknown. Therefore the tension, and thus the compliance with wire rope load safety factors, is unknown to the hoistman.

By Mario Samamé Boggio

El presente texto describe los recursos minerales encontrados en la provincia y distrito minero de Hualcayoc en Cajamarca. El distrito ha producido menas de plata y oro durante la Colonia y menas de cobre, zinc y plomo en la actualidad. La plata se incluye en la galena y en la tetraedrita. Algunas vetas contienen cantidades menores de enargita, estibina, jamesonita, boulangeritá y bournonita. La baritina es la ganga principal. También se encuentran: marcasita, pirrotina, rodocrosita, dolomita y calcita. La plata nativa encontrada en la época colonial ya no se encuentra.

Jul 1, 1983

Often plant performance suffers as a result of poor control. Poor control leads to low mill throughputs, poor classification and less than satisfactory concentrate grades and overall recoveries. By using the appropriate control tools, substantial gains in plant performance can be made. Mintek?s MillStar and FloatStar controllers have been implemented at various sites across the world. The MillStar controller incorporates leading technology that controls process units from the mill feed through to the flotation feed. Typical results show that milling circuit throughput is increased by 6-10 % and the final product grind size is tightly controlled, thereby enhancing flotation performance. The FloatStar controller is aimed at stabilising and optimising flotation circuits. Through improved level control alone, recovery improvements of up to 1 % have been achieved. Furthermore, by using on-line grade analysers, the controller stabilises final concentrate grades, whilst maximising flotation recovery.

Jan 1, 2005

By J. Hyvarinen, A. D. Look

"INTRODUCTION AND SUMMARYElectricity is used extensively in open-pit metal mines to provide illumination, heat, and power to operate hauling and loading equipment, drills, pumps, signal systems, and other machinery. Good installation and maintenance of equipment and power, circuits, are essential to minimize the hazards of shock, burns, and fire.In the 13 years from 1931 to 1943, 20 fatal and 82 nonfatal injuries resulted from the use of electricity in open-pit mines in the United States ; 4/ these figures represent about, 10 percent of all fatalities and 1 percent of the nonfatal injuries. The ratio of fatal to nonfatal injuries from electricity in such mines was very high during this period; the figures show one fatality to every five accidents from this cause.Electricity may cause personal injury through abnormalities in equipment, such as short-circuit, accidental ground, overload, and poor contact; however, each year some fatal electrical accidents are due to persons touching uninsulated ""live wires."" These contact injuries are the result of careless body movements of persons in the vicinity of 'wires at places not normally frequented, or of accidental contact with live circuits when handling metal objects. Electrical hazards can be minimized by the enclosure or elevation of current-carrying parts; ample working space around equipment, adequate insulation, locking switches in the open or closed position under certain conditions, identifying and warning devices, protective grounding, insulating flooring, platforms, or rubber gloves, and proper inspection and maintenance."

Apr 1, 1949

By Kazumasa Taguchi

At the Kakogawa works of Kobe Steel. Ltd., the agglomeration facilities are composed of a pelletizing plant and sintering plant. This aim is to utilize raw materials efficiently and stabilize the raw material resources. Therefore at Kakogawa works, the blast furnaces (BF) have been operated with high pellet ratio and various developments for pellet properties have been achieved to improve the blast furnace performance. These developments include dolomite-fluxed pellets, new-porous pellets and crushed pellets. As a results of these improvements, pellets have achieved almost the same performance as sinter at high temperature regarding properties such as the softening, melting and reduction behaviour. However, some problems on shape have remained to be solved. Spherical pellets flow easily into the center of the furnace and form mixed layers of pellets and cokes. Therefore, in BF operations with these pellets it becomes more difficult to keep proper and stable gas distribution.

Jan 1, 1983

By E. V. Verhoej

The proposed EU directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment promotes the substitution of lead in consumer electronics to reduce emissions from lead in the end of life phase. In this paper, the consequences of substituting lead in solders is assessed using the Eco-Indicator-99 method for the examples. The base metal production system is considered as an interconnected network modeled dynamically in Simulink 4 and Matlab 6 (Mathworks Inc 2000), where the recovery and production of metal components of the assessed product partially overlap. This approach requires global modeling of metal production processes and mass balances and resulting allocation choices. It also reveals the susceptibility of LCA scores to different choices in the modeling and data availability and uncertainty. Besides the comparison between lead-free and lead-containing solders, other side effects are revealed. Lead is carrier material for the recycling and production of many co-elements in the interconnected production and recovery system. Substitution may have adverse effects such as temporary shortages of other connected metals that are often not considered in normal LCA assessments, thus leading to erroneous results. The suggested approach provides directions for including these extemal effects and for further assessment of the environmental effects of substituting lead. This paper shows that in order to assess the environmental aspects of metallurgy, dynamic modeling of the total system is required based on the fundamental thermodynamics in each metallurgical reactor, the basis of this dynamic model. With this the true environmental impact of metallurgy can be explained. In the case of lead free solder, it is shown that the mining of substitutes has a very much larger impact.

Jan 1, 2003

By César Macher

Dada la importancia económica y social que tiene la seguridad e higiene minera en el país, el objetivo del texto radica en crear las bases de un programa de higiene y seguridad que defina, evalúe, controle los riesgos industriales, como capacite a los estudiantes de ingenería de minas para mejorar los servicios que presta en la industria minera. El curso comprende cuatro capítulos y la distribución del tiempo de enseñanza en un periodo semestral. Entre los aspectos básicos del programa está la definición, significado económico y legislación sobre los riesgos ocupacionales; el conocimiento de los riesgos industriales referente a los agentes químicos, físicos, biológicos en los centros laborales; el muestreo y determinación de atmósferas polvorientas o control de riesgos, prevención de incendios y explosiones, normas de seguridad, y la forma de organización de seguridad e higiene minera. De otro lado, las presentaciones teóricas del curso se complementarán con problemas prácticos de la minería, material bibliográfico, y el desarrollo de prácticas con facilidades del Instituto de salud ocupacional, concluyendo con una serie de exámenes parciales teóricos-prácticos.

Jul 20, 1959

By Francisco Cárdenas

El proceso Green Mining permite que las empresas mineras obtengan menores cut-off y cash cost para su actividad extractiva, a la vez que posibilita la realización de trabajos de prospección y exploración a yacimientos con leyes más bajas o considerados marginales, de manera que posteriormente se puedan poner en operación más proyectos mineros. Dicha innovación tecnológica consiste en un nuevo método de procesamiento de minerales, el cual permite extraer metales ferrosos (hierro y el oro asociado) y no ferrosos (cobre, plomo, zinc, plata, molibdeno, antimonio, arsénico, entre otros) a partir de los minerales sulfurados que los contienen, aplicando el proceso de reducción directa mejorado, esto es, sin emisiones de anhídrido sulfuroso y sin producir las escorias que genera la pirometalurgia convencional, lo que minimiza la contaminación ambiental. Asimismo, mediante la regeneración y reciclaje del agente reductor y del fundente propuesto, se reducen sustancialmente los costos operativos del proceso metalúrgico.

May 22, 2019

By Jorge Aguirre Martín

El presente trabajo describe el proceso de optimización y reducción de costos de mina desarrollado por la gerencia en el yacimiento minero de Casapalca. Desde 1998, la gerencia general desarrolló un proceso de reorganización, donde se estableció tres áreas específicas como: la Gerencia General, la Superintendencia técnica y el departamento de Seguridad; así como sus funciones. La primera, comprende el establecimiento de las metodologías de trabajo, la segunda, responde a la implementación de estándares internaciones y la tercera, implementa el sistema de seguridad NOSA para la reducción de accidentes y pérdidas materiales. En ese sentido, el éxito de una empresa radica en valorizar a los empleados como seres humanos, en tanto estos se sientan capacitados y puedan desarrollar sus funciones de manera satisfactoria, con alegría y seguridad, al tiempo que se reducen los costos de operación y se favorece la calidad de la mina.

Oct 6, 1999

By V. Navarro Torres

El presente texto analiza la estabilidad de los tajeos de explotación del depósito de cobre y zinc de Feitais de la mina Aljustrel. Para ello, se realiza la medición de tensiones verticales y horizontales “in situ” y luego realizar simulación tridimensional usando el método de elementos finitos diferenciados. En consecuencia, la estabilidad de los pequeños y grandes tajeos se garantiza que varían de 6 a 20 en las aberturas de los tajeos y de 16 a 57 en los pilares.

Sep 12, 2011

By Ralph Husack, J. W. Eckerd, G. A. Brady

The effect of gamma radiation on Pennsylvania anthracite and on reactions between anthracite and other materials was studied using a shielded , selfcontained 23,000 - curie cobalt 60 source . When anthracite was exposed to air at 65° C the reaction with oxygen was greater in the presence of radiation. than in its absence . Although drop- shatter tests indicated that exposure to radiation decreased the resistance to breakage of anthracite , this evidence of structural weakening was not supported by the results of grindability or particle- size studies . Irradiation caused definite changes in the gases evolved from evacuated samples of anthracite ; the percentages of hydrogen and carbon dioxide were increased, and the methane concentration remained unchanged . Carbon monoxide was evolved only from the unirradiated samples . Electron paramagnetic resonance (EPR ) measurements indicated large differences between evacuated samples and those exposed to air . There was little or no difference between irradiated and unirradiated samples , except that the free- radical content of unirradiated samples of anthracite increased progressively with higher temperatures of evacuation , but in the case of irradiated samples , no such behavior was found . Attempts to produce carbon disulfide and calcium carbide by reacting anthracite with sulfur up to 120 ° C , and with calcium oxide up to 400 ° C , were unsuccessful .

Jan 1, 1964

Organization Place Date 1913 Mining and Metallurgical Society of America New York, N. Y. Jan. 8 American Institute of Electrical Engineers New York, N. Y. Jan. 11 American Society of Civil Engineers New York, N. Y. Jan. 22-25 American Society of Heating and Ventilating Engineers : New York, N. Y. Jan. 22-25 American Institute of Mining Engineers New York, N. Y. Feb. 18-21 National Society for Promotion of Industrial Educa- tion New York, N. Y. Feb.. American Institute of Architects Washington, D. C. April American Iron and Steel Institute New York, N. Y. May New York Electrical Society New York, N. Y. June National Association of Stationary Engineers Cincinnati, 0. Sept. American Chemical Society Cleveland, 0. Sept.

Jan 1, 1918

By J. E. Pahlman

The Bureau of Mines performed research on a fluid-bed magnetic roasting process for nonmagnetic taconites that utilizes low-rank coals and lignites as reductants and fuels. Roasting tests on a Michigan nonmagnetic taconite were conducted at 600° to 725° C with lignite or subbituminous coal as reductants. Partial combustion of the reductant reduced the amount of heat externally applied to the reactor to maintain the desired reactor temperature. Cleaned, dried reactor top gases were recycled to recover a portion of the reducing potential in these gases without adversely affecting concentrate grade and iron recovery. Highest iron recoveries for magnetic concentrates were obtained at a roast temperature of 650° C with lignite and at a roast temperature of 725° C with subbituminous coal. Magnetic concentrates were obtained that were comparable with commercial concentrates.

Jan 1, 1976

Today computers are accepted as a standard item in industry and they perform a variety of tasks over a wide spectrum of activities from mine planning and CAD to data processing and spreadsheet work. However many problems particularly in the. area of decision making where there are no clear mathematical models available and usually the output or answer is dependent to some extent on a heuristic approach, don't lend themselves to conventional solutions using standard procedural algorithms. Recently a number of techniques have evolved primarily from the enhanced capabilities of modem equipment, which are capable of solving these problems. This paper is a brief overview of these rather unconventional developments of computer technology in the area of artificial intelligence with reference to their application in mining.

Jan 1, 1993

By Arístides Sotomayor

El comercio internacional de minerales y metales es una actividad importante que se relaciona con el comportamiento de la economía global, donde se analizan las tendencias de precios, producción y consumos de los minerales básicos y metales. En ese sentido, la aplicación de los diferentes tipos de cobertura en la compra y venta de los minerales y metales son prescindibles como modelo de estrategia competitiva, cuyo objetivo principal es proteger a las partes, reduciendo los riesgos inherentes a las fluctuaciones de los precios por las que atraviesa un metal en sus diferentes etapas hasta su último comprador. Por ello, el presente trabajo señala algunos modelos estratégicos para la comercialización competitiva de minerales y metales tales como lo de ecuaciones desarrolladas, donde se puede proporcionar una valoración bastante aproximada en la comercialización competitiva de cada producto minero; y los de función de correlación cruzada de los precios de cobre, plomo y zinc, donde se se establece un seguimiento de las tendencias futuras útiles para conocer los valores correlacionados entre las variables analizadas.

Sep 12, 2005

By Jonas Olsson

"The picture of China as an antiquated continent is changing rapidly and fast-forwarding progress is a fact in most infrastructural fields. Mining is not an exception. China is today the largest producer of aluminum, coal, steel, zinc, tin, lead and manganese and the country’s mineral resources comprising approximately 12% of the global reserves ranks them number three in the world after US and Russia.In order to feed the growth industry is needed to take extra ordinary strides to improve supply of raw material and Chinese mines are continuously being upgraded with the latest western technology to meet the increasing domestic demand of base metals.In Anshan located in China’s northeast province Liaoning we find one of the fastest developing mining companies, Angang Iron & Steel Group Co. Ltd. With their six mines that together process approximately 60 M ton iron ore/year Angang Iron & Steel Group Co. Ltd is the largest iron ore company in China. The group’s thorough pre-studies and technical evaluations over the past five years have made them very successful in both plant upgrades of existing operations and green field projects.INTRODUCTIONWe live in a time when the world market is gradually acclimatising to the global consequences of “The China effect”. An effect caused by a formerly sleeping giant nation that during the last years has awakened and developed beyond comparison, primarily because of booming infrastructure projects and demand for capital and consumer goods"

Jan 1, 2006

By J. A. Marts, R. C. Gilmore, S. Saki, J. F. Brune

Computational fluid dynamics (CFD) modeling involves the creation of a computation domain called a mesh or grid to solve the equations defining the physics of fluid flow. This process often comprises the majority of time spent in modeling efforts. In a project sponsored by the U.S. National Institute for Occupational Safety and Health (NIOSH), researchers at the Colorado School of Mines used an innovative meshing approach, allowing easy adaptation of the CFD model to adjust to a variety of longwall bleeder-ventilated and progressively sealed (often referred to as bleederless in the United States) mining geometries, with gob porosity and permeability scalable over a wide range. This paper presents the methodology of the meshing and scaling approach along with recommendations for using CFD modeling in longwall gob ventilation applications. The new meshing technique was utilized to evaluate the function of a back return in a progressively sealed gob and a bleeder-ventilated gob.

Jan 1, 2014

By Stevenson I, Dickinson W, Taylor R. N

Despite flash smelting's widespread use little is known about the actual processes taking place in flash furnace shafts and comparatively few reports of sampling campaigns have appeared in the published literature. his paper reviews the previous reports of the use of horizontal trough samplers and analyses their expected collection efficiency. In the light of the deficiencies revealed by this analysis an isokinetic sampler was produced and a vertical sampling technique was also developed to obtain samples from directly below the burners in the shaft of the flash furnace at the Kalgoorlie nickel smelter. Comparison of the sizing of the samples obtained with the horizontal trough and isokinetic samplers confirmed the theoretical analyses and showed that the trough samplers were not collecting the fine particles. Besides providing data to validate mathematical models of the burners and shaft, chemical analyses of the shaft samples showed that the coal in the charge was reacting preferentially and that the plume of at least one of the burners was being deflected from its axial position. In the region directly below the burner there was evidence that the disperser on the burner was imparting more momentum to the coarser particles and that these were concentrating in the outer regions of the particle plumes issuing from the burners.

Jan 1, 1992

By Juan Silbino Marceliano Rojas

Volcan Compañía Minera S.A.A. es una empresa minera peruana que inicia sus operaciones en el año 1943. A lo largo de sus 71 años ha logrado posicionarse como la primera productora de plata, plomo y la segunda en zinc a nivel nacional. Durante este periodo la compañía se ha expandido y ha alcanzado excelentes resultados de productividad. Sin embargo, estos resultados no han sido acompañados de indicadores de seguridad favorables. En los últimos 12 años (2000-2011) se han presentado 88 fatalidades, 960 accidentes incapacitantes y 1400 accidentes leves. En el 2012, la dirección de la organización decide realizar un cambio trascendental en la gestión de seguridad, estableciendo como primer objetivo estratégico de la compañía la implementación de una cultura de seguridad de clase mundial para minimizar la frecuencia y la severidad de los accidentes de trabajo. Partiendo de este objetivo en el año 2012 realizó un diagnóstico a nivel corporativo que nos ubicó en una fase de dependencia en relación a la curva de cambio de cultura, tomando como base el concepto de Bradley e identificó la necesidad de efectuar un cambio en dos frentes: Sistema de Gestión SSO y Líderes. Diseñamos una "Estructura Organizacional" en los tres niveles de operaciones, lo que involucró a los líderes y evidenció así el "Liderazgo Visible". El sistema se basó en cuatro pilares fundamentales y aplicó las siguientes herramientas: gestión de riesgos, condiciones, conocimiento y comportamiento. Dentro del pilar condiciones, priorizamos doce riesgos críticos para contener los accidentes mortales e incapacitantes. Los Líderes fueron entrenados en la herramienta de gestión y en los cuatro pilares del sistema. De esta manera se logró el impacto directo en la supervisión y los trabajadores, así como desarrollar las competencias de comunicación, motivación, retroalimentación, confianza y compromiso. El modelo está evolucionando la cultura de seguridad hacia una fase de interdependencia. Hemos reducido los índices de frecuencia en un 55%, severidad en un 92% y accidentabilidad en 96%, sin embargo nuestro logro más importante es la contención de los accidentes mortales a la fecha.

Sep 21, 2015

By Artur Camposo Pereira

A crescente preocupação com a qualidade da cerâmica vermelha e com o uso racional dos recursos naturais utilizados por ela, tem motivado a diversas pesquisas em busca de uma otimização de seu uso. Atualmente o setor produtivo, localizado no Norte do Estado do Rio de Janeiro, no município de Campos, conta com mais de 100 cerâmicas que fazem uso de um método empírico para formulação de massa cerâmica, tendo como principal consequência à perda da qualidade de seus produtos, isso e fruto da insuficiência de estudos dos solos em diferentes pontos das jazidas utilizadas. Este trabalho tem como objetivo a caracterização, através de ensaios de granulometria, Limites de Atterberg e análise química para um conhecimento dos solos a serem utilizados na composição da mistura. Este conhecimento traz maior percepção quanto a algumas dificuldades a serem enfrentadas pelos processos produtivos. Com os resultados encontrados pode-se dar algumas diretrizes iniciais para uma melhor adequação na formulação das misturas, diminuindo o empirismo e aumentando a qualidade dos produtos.

Oct 30, 2017