Search Documents

By Richard L. Stowe, Donnie L. Ainsworth

The static, rapid, and shock-loading response of rock is of interest to many in the field of rock mechanics. For example, the effects of loading rates on strength and stress-strain characteristics of rock are quite important in defining input loading for use in the design of underground protective installations. Response data on rock subjected to shock loading over a wide range of pressures are also vital in the field of underground nuclear testing. In addition, material response is needed in design of shock-absorbing liners. A number of investigators have reported that ultimate compressive strength of rock increases with increased rates of loading.1-6 Wuerker3 stated that modulus of elasticity, obtained from sonic determinations, increased in some rocks by a factor as high as 4.5. It appears that only a limited amount of work has been done on comparing static modulus and modulus obtained from impact testing.6 Phillips4 showed that with increased rates of loading the deformation decreased. More recent work by Atchley and Furr5 showed that when moderate-strength concrete is stressed with increased loading rates, the axial strain at failure increased. One would expect this to occur if we think in terms of purely elastic materials. For example, if E is constant and maximum strength [amax], increases, the axial strain would also increase. However, in rock testing thus far we have worked almost exclusively with nonhomogeneous and inelastic rocks. From this fact alone the increase in axial strain with increased load application is noteworthy.

Jan 1, 1972

By Milton Camino

El presente texto describe los antecedentes geológicos del yacimiento orogénico El Gigante, el cual presenta una mineralización filoneana del tipo relleno de fracturas asociada a estructuras de un lineamiento principal NW-SE. posicionándose como una de las franjas metalogenéticas de oro más importantes de la región y del mundo. De forma que se busca difundir los últimos resultados de la exploración a través de los nuevos descubrimientos en profundidad y los nuevos sistemas de vetas al borde Este del Batolito De Pataz. Así como formular un modelo que integre geología, mineralogía, cronología y geoquímica del yacimiento El Gigante, que permita mejorar el entendimiento de los procesos de formación de los yacimientos orogénicos de la franja metalogenética de Pataz y oriente al descubrimiento de nuevos recursos minerales.

Oct 21, 2015

In November 1999 Waihi Gold Mining Company commissioned its new crushing and conveying plant used to transport both ore and waste from the Martha Mine to its ore processing plant and also its tailings dam construction area. To date, a record monthly throughput of 854 000 tonnes throughput has been achieved. This paper outlines the measures taken subsequent to the commissioning of the system to achieve greater than design throughput and to mitigate the environmental and safety issues associated with operating the system in the middle of a town.

Jan 1, 2001

By Bianca Vieira Stragliotto

O controle térmico do aço dentro da panela de aciaria depende do conhecimento das perdas térmicas e da estabilidade do processo, durante a etapa de refino secundário. O objetivo deste trabalho é desenvolver um modelo que prevê a temperatura de chegada do aço líquido no forno-panela. Foram calculadas as perdas térmicas do aço durante o vazamento do forno elétrico a arco e transporte para o forno-panela. As perdas por adição de ligas e escorificantes, pelos refratários, por convecção e radiação da escória e tempos de processo foram consideradas. Os cálculos foram aplicados em dados históricos de 469 corridas de uma aciaria elétrica, distribuídas em 14 qualidades de aço produzidas. As perdas por adição de ligas e escorificantes ocasionaram no sistema uma perda de temperatura média mínima de 5°C e máxima de 53°C. O modelo mostrou-se apto para testes em escala industrial, apresentando acerto médio de 72,5%.

Oct 30, 2017

By W Medina, G Angulo, A Anani

A current challenge faced by the mining industry is solving the integrated transition mine problem (TMP) that maximizes the net present value (NPV). This study aims to develop an optimization framework capable of solving the TMP. The problem is NP-hard and therefore computationally intractable. Three ad hoc approaches – Exact solution, Benders’ decomposition, and Benders’ decomposition with Bienstock-Zuckerberg (BZ) algorithm – are compared for different scheduling periods. The TMP is formulated as a mixed integer linear programming model, implemented in Python, and solved with the Gurobi optimizer. The results showed that Bender's decomposition with the BZ algorithm outperforms the other approaches in execution time, computational cost, and feasibility to address large problems in exchange for a marginal cost in the quality of the NPV obtained. In addition, the probability of finding the optimal point of transition is higher regardless of the number of feasible crown pillar locations evaluated. This is achieved through the optimality cuts proposed in the algorithm.

Jun 25, 2023

By Diego Corrêa Magalhães

Com o objetivo de encontrar uma solução inovadora e de baixo custo para o tratamento de efluentes domésticos, foi desenvolvido e implementado na ArcelorMittal Tubarão um sistema de tratamento utilizando escória de aciaria LD. O sistema, que se compreende de um Tanque de Recebimento; Tanque de Sedimentação; Filtro de Escória; e Redutor de pH foi objeto de estudo e teve sua eficiência medida em relação a sete fatores: Demanda Química de Oxigênio, Demanda Biológica de Oxigênio, E. Coli, Fósforo Total, Fósforo Dissolvido, pH, e Sólidos Suspensos Totais. De maneira geral, o sistema mostra-se eficiente, com destaque para as excelentes taxas remoção de E. Coli, Fósforo Total e Fósforo Dissolvido. O controle do parâmetro pH através de um método de baixo custo ainda representa um fator a ser superado, que quando consolidado permitirá uma nova aplicação para o material no tratamento de efluentes domésticos e rurais.

Aug 16, 2017

By Isabela Santana de Oliveira

O aço inoxidável 304L pode apresentar uma característica particular: transformações de fase induzidas por deformação, o efeito TRIP (Transformation Induced Plasticity) que possui embasamento na transformação martensítica. Neste trabalho propõe-se analisar o perfil de formação de martensita em corpos de prova submetidos a ensaio CLC (Curva Limite de Conformação), segundo o método Marciniak, nas regiões junto à trinca e distantes da mesma através de uma sonda portátil de um ferritoscópio. Utilizando técnicas de difração de Raios-X (DRX) e ensaios de dureza Vickers pode-se correlacionar a evolução microestrutural e valores de dureza nessas mesmas regiões ao grau de encruamento da austenita e a formação de martensita.

Aug 7, 2018

By Brian T. Brady

The year 1991 recorded unprecedented change throughout the world; war in the Middle East, economic recession in key industrial nations, upheaval in Eastern Europe, and the disintegration of the former U.S.S.R. These issues and growing environmental concerns will affect the entire world mining industry. Environmental issues continue to have an ever greater effect on industrial minerals. In the United States, major issues involving the Clean Air Act, Clean Water Act, and the recent Stormwater Rule by the U.S. Environmental Protection Agency (EPA) affect many types of mineral operations. Significant developments include an important decision in 1991 by a Federal Appellate Court to overturn EPA's asbestos ban on certain products, partly on environmental grounds, and proposed legislation that would overhaul or abandon the 1872 Mining Act. On a global scale, prominent issues include environmental concerns over mining in the Antarctic and Arctic regions and a cutback in plans to clean up the Kola Peninsula in the Commonwealth of Independent States (C.I.S.).

Jan 1, 1993

By Sérgio Fernando Nunes

No presente estudo foi realizada uma investigação da influência do teor de hematita especular, percentual e granulometria da carga circulante do pelotamento nos parâmetros de qualidade física das pelotas cruas e queimadas de minério de ferro da Samarco Mineração. Preliminarmente foram executados testes exploratórios em escalas de laboratório e industrial objetivando avaliar o melhor teor de umidade, área superficial específica do pellet feed e carga circulante do pelotamento. Após essa fase exploratória, foi feito o projeto de experimentos dos ensaios de pelotamento e de queima no pot grate, empregando três fatores em dois níveis com ponto central e réplica. A resistência á compressão a úmido e a seco, diâmetro médio e bulk density, foram os parâmetros de qualidade física avaliados para as pelotas cruas. A resistência á compressão, índice de tamboramento e abrasão, porosidade e bulk density, foram os parâmetros de qualidade física avaliados para as pelotas queimadas. O atributo percentual de pelotas nucleadas queimadas também foi avaliado. Concluiu-se que a mineralogia, granulometria do pellet feed e composição da carga circulante influenciam fortemente na qualidade física das pelotas cruas e queimadas.

Aug 1, 2018

By André Santos Caires de Sousa

As equipes de manutenção das pontes de Vega não possuíam uma ferramenta de armazenamento de dados de longo prazo, que permitisse analise de falhas e a avaliação das condições operacionais necessárias à manutenção preditiva. Com essa deficiência, as condições de ocorrência de paradas não programadas eram favorecidas. Fazia-se necessário uma ferramenta que permitisse o desenvolvimento de aplicações mais sofisticadas para monitoramento de equipamentos das Pontes Rolantes, além de que todo diagnóstico realizado era localmente na ponte e com as informações atuais (posteriores ao evento ocorrido). Após a implantação os ganhos foram satisfatórios, reduziu-se o tempo de atendimento das ocorrências, a planta se adequou ao padrão mundial de Prevenção de Fatalidades do grupo ArcelorMittal, reduzindo o trabalho em altura, exposição do executante ao risco, custo de manutenção e quantidade de paradas não planejadas, além de suportar o foco na manutenção preventiva e preditiva.

Oct 30, 2017

By Harold Markus, Gerhard Derge

THE first paper1 of this series described a technique of careful surface preparation by means of which reproducible results may be obtained from potential measurements of the behavior of tin in carbonate solutions with a pH range from 8.4 to 11.2. It then went on to establish the behavior of pure tin electrodes under these conditions and showed that the metal remains active at all times, though the steady potential attained after several hours decreases from I.I2[t] volts at a pH of 12.6 to 0.6 volts at a pH of 8.4. This behavior may serve as a norm with which all other data can be compared. In the second paper,2 small amounts of other anions were added to the carbonate solutions and the conclusion was reached that the common impurities encountered in alkaline materials packaged in tin do not increase corrosion. In fact, in some cases these anions may actually promote the formation of protective films. The present paper rounds out this survey by presenting data on the influence of cations added to the carbonate solutions, as well as the effect of alloy additions to the tin. In many cases the potential data are supplemented with weight-loss measurements. Information is also presented on the effects of some additional anions, the influence of gases above the electrolyte, the behavior of high-purity tin, and the effect of atmospheric oxidation on the corrosion resistance of the above-named alloys. Analysis of the entire body of data discloses some general rules applicable to corrosion in carbonate solutions. The experimental methods used are the same as those previously described. EXPERIMENTAL DATA Cations.-The carbonates of the cations K+, Li+, NH4+, which are soluble, were studied in the same way as the anions, by adding 0.01 mol of the metal carbonate to one liter of 0.2 M sodium carbonate solution, pH 11.2, or to 0.1 M sodium bicarbonate, pH 8.4. The other metallic carbonates are only slightly soluble, of the order of 0 7-3 mols per liter or less, and the sodium carbonate solutions were saturated by adding excess reagent several days before the experiment, shaking frequently, and filtering just before use. The chemicals were c.p. grade in each case except the indium salt. This salt was prepared by solution of the metal in hydrochloric acid and precipitation by addition of Na2CO3. These cations may be divided into two classes, according to their effect on the potential behavior of the tin: (I) normal, (2) passive. To offer a basis of comparison, curves I of Figs. I and 2 are given to illustrate the behavior of tin in carbonate solutions saturated with CaCO3. These curves are the

Jan 1, 1941

By J S. Dunlop

At its most basic level, minerals project management may be broken down into a series of logical chronological phases, described in this paper as: exploration, discovery; scoping and pre-feasibility; feasibility and approval; project financing and commissioning; operation; expansion and closure. Each phase has its own peculiarities and challenges, any one of which can potentially upset the forward progress of a minerals project.Reference is made to each of these project phases based on the authorÆs many years of first-hand experience, in an attempt to identify issues within the project management spectrum where additional caution may be warranted. Left un-addressed, these issues can cause undue delays in the project timeline, ultimately delaying approval at significant project cost.Finally, reference is made to the Mine ManagerÆs Handbook recently published by the AusIMM which is an excellent project management resource, considered to be very relevant for minerals treatment plant managers, whether the context be constructing, operating, expanding or shutting down.CITATION:Dunlop, J S, 2013. Mineral project management - A perspective from four decades in the industry, in Proceedings MetPlant 2013 , pp 13-27 (The Australasian Institute of Mining and Metallurgy: Melbourne).

Jul 15, 2013

By André Luis de Oliveira

O Alto Forno 3 (AF3) da Companhia Siderúrgica Nacional (CSN) é o equipamento muito importante no processo siderúrgico da Usina Presidente Vargas (UPV), situada em Volta Redonda (RJ), por responder por mais de 70% da produção de gusa da UPV. Na produção de gusa é gerado o Gás de Alto Forno (GAF), subproduto de alta relevância, pois este gás sai do topo do AF3 com grande pressão e cinética, energia essa passível de utilização. Em 2007 a CSN, optou por adquirir um equipamento denominado “Top Pressure Recovery Turbine” (TRT), capaz de aproveitar tal energia para gerar energia elétrica. Em 2013, a equipe de supervisores da KHI – Kawasaki Heavy Industrie, fabricante da turbina, veio para o Brasil para realizar no equipamento os testes a frio e a quente para na seqüência vir a operá-lo. Ocorre que fatores alheios ao objetivo desta apresentação impediram a equipe da KHI de partir o equipamento no tempo previsto, bem como de retornar ao Brasil para dar seqüência nas atividades. Em novembro de 2013 a CSN definiu por partir o equipamento com recursos próprios, sendo este o foco do trabalho. A presente contribuição técnica vem mostrar o trabalho desenvolvido internamente pelo grupo técnico a fim de finalizar o projeto e colocar a Turbina de Topo (TRT) em operação, fato este dado total ênfase pela direção da empresa devido ao cenário nacional de crise energética em que os valores de energia estavam no limite máximo permitido pela legislação e impactando diretamente nos custos da empresa.

Sep 25, 2017

By P Navarra, R Kuhne

Dynamic simulation (discrete event simulation) is the preferred methodology to evaluate the impact of dynamic aspects of processing plants on the overall plant capacity. This tool can be used to: identify bottlenecks in the plant,justify upgrade and expansion projects by evaluating their impact, oroptimise maintenance and operating practices without disrupting the operation. Iron Ore Company of Canada's (IOC) pelletising plant is a complex operation because of multiple products, varying equipment capacity and shifting bottlenecks. Furthermore, with extensive capital requirements for projects and long lead times, a high level of confidence in project outcome is required. Therefore, a model of IOC's pelletising plant in Labrador City was constructed in 2007 by a joint IOC and Hatch team. The model includes both operational and metallurgical aspects in order to better capture the complexity of IOC operation. In this paper, the justification, boundaries, and functionality of the model are described. A comparison of simulation results to historical plant operation is given. It is observed that projects have interactions and that the benefits of combined projects are not equal to the combined benefits of the individual projects. Projects can have synergies that result in greater benefits when combined or can have overlapping benefits that result in lower benefits when combined. The power of the proposed modeling exercise lies in the ability to assess the impact of projects on overall performance.

Jan 1, 2009

By T. J. Snell

Bolnore Village in Haywards Heath, Sussex, England, is a large development covering 8 to 10 hectares and expected to provide 1500 homes in five phases to assist in the continuing demand for new homes in the London area. Part of the development required housing on a relatively shallow slope found to have deep seated failure planes which are fairly prevalent in this part of Sussex. Locally the slope angle was around 20 degrees but more typically the gradient was 6 to 7 degrees. There were significant concerns about slope stability and bearing capacity due to pre-existing shear surfaces and the complex geotechnical profile. There was some evidence of instability in the form of residual shear surfaces and tension cracks. The development required terracing the site with retaining structures up to 5 meters in height, formation of access roads and foundations of new houses. The developer Crest Nicholson adopted a collaborative approach with consulting engineers Powell Tolner and specialist geotechnical contractor Keller Ground Engineering. The solution consisted of a novel combination of contiguous bored piling, ground anchors, and both block work and timbacrib retaining walls to ensure the geotechnical issues were adequately addressed within the time and cost constraints set by the team. The paper describes the geotechnics of the problem together with the design, practical implementation, and site progress achieved

Jan 1, 2006

By R. G. Sinclair, E. Sangine, S. M. Fortier, J. Brainard, K. Stone

"The U.S. Geological Survey and Natural Resources Canada conducted a study on the net import reliance of each North American country, and the impact of North American trade on the net import reliance of 12 nonfuel mineral commodities that are associated with advanced technology products: cadmium, cobalt, gallium, germanium, graphite, indium, lithium, nickel, rare earth elements, selenium, silver and tellurium. The combined results for North America, using 2014 data, showed greatly reduced net import reliance for nearly all of the commodities evaluated, which is largely the result of pooling the resources of production and recovery in Canada and Mexico of materials that are consumed in the United States. This study highlights the mitigation of potential supply risk for critical materials that results from trade within the North American trade bloc. IntroductionMultiple metrics and definitions exist for what constitutes a critical material, but there is broad acknowledgment that a mineral commodity may be considered critical if, among other factors, its production is geographically concentrated, if it has few or no substitutes, or if the country of origin is politically unstable. Numerous governmental and independent researchers have proposed methods of investigating criticality, with differing priorities such as economic resilience or strategic military supplies (European Commission, 2014; Graedel et al., 2015; U.S. National Science and Technology Council Subcommittee on Critical and Strategic Mineral Supply Chains, 2016). While criticality really depends on who is asking the question, and despite the differing priorities, there are several commodities that are commonly found to be of concern. In particular, some critical or potentially critical materials are used increasingly in advanced technologies, or they have complicated supply chains because they are coproduced or are produced in controlled markets.Commodities for which imports are required to satisfy domestic demand are those for which the importing country is net import reliant. Net import reliance (NIR) in this study is calculated as the amount of imported material, including changes in stockpiles, minus exports and is expressed as a percentage of domestic consumption:"

Jan 7, 2018

By C. R. Copeland

Airborne dust emission standards are receiving growing attention. This trend is motivated by significant health studies that have shown adverse health effects due to exposure to dust. Currently, the air quality standards are not specific to particles in the nanoparticulate range (<1,000 nm). However, as our understanding of health related matters increases, it is very likely that nanoparticulate standards will be adopted. It was previously believed that typical comminution and material-handling practices could not result in airborne nanoparticulates. However, experimental studies using air monitoring and SEM have verified the presence of nanoparticulates in the air as a result of comminution and material handling. This means that emerging nanoparticulate air quality standards are a real possibility for industrial operations. With this emerging problem facing the minerals industry, effective suppression methods for nanoparticulates should be explored. Systematic studies have indicated that nanoparticulates from silica can be suppressed utilizing hygroscopic reagents such as calcium chloride. This reagent was as much as 93% more effective than water in suppressing silica nanoparticulates.

Jan 1, 2007

By Giulio Antunes de Medeiros, Leonardo Martins Silva, Giselle de Mattos Araújo, Rayla de Souza Caldas

To analyze the direct reduction of self-reducting briquettes producted with different electric arc furnace dust contents, three sets of homogeneous mixtures were produced with elephant grass biomass, iron ore, cement and furnace dust in increasing levels, which were submitted to thermogravimetric tests in muffle furnace and TGA furnace at variable temperatures and times. The curves of degree of reduction were obtained and the reduced briquettes were analyzed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results showed that the reducibility of the agglomerates is diminished by the increase of furnace dust, with variations of this result at higher temperatures. The observed microstructures were spherical particles, porous structure or whiskers. Based on XRD results, it was considered probable that the decrease of the degree of reduction with the increase of furnace dust content is related to the reaction between hematite and zincite, which is expected to be controlled by zinc diffusion.

Oct 1, 2019

By R. S. Douglas

Introduction The operations of The Granby Consolidated Mining, Smelting and Power Company, L1mited, have always been concerned with the mining of low-grade copper ores. In the fifty years of this Company&apos;s existence, nearly 60,000,000 tons of such material has been successfully mined and treated. During these years, many changes in mining practice took place. However, at Copper Mountain, due to the large tonnages of very low grade material, it was realized that something more than changing mining methods would have to take place if these low-grade orebodies were to be mined at a profit and the Company and. its employees enjoy many years of successful operation and employment. Production costs were mounting commensurately with rising taxes and the increasing cost of supplies, labour, freight, and smelting, while the value of the product on the market was not increasing in price to compensate for the higher costs of production. A survey of the mineable ore in 1944 indicated that, of the 12,000,000 tons in the reserves, only 3,500,000 tons was now profitable ore. This reduction in the commercial ore reserves was a serious matter, as it meant that the mine had only two years of life at the profitable shipp1ng rate of 4,800 tons per day. Further, the location in the mine of the orebodies making up the 3,500,000 tons was not suitable for such high production.

Jan 1, 1950

By P R. Denize, V S. Wein

A brief review of the Waipipi Iron Sands Limited company history and operations over the past ten years is made along with a summary of the benefits of this mining company to New Zealand. Land rehabilitation procedures in coastal dune lands are described in detail and brief mention is made of a study of animal health and copper uptake. The paper concludes with a summary of the increased emphasis on agronomy and restoration as the mining operation commences dredging in a better class of grazing land.

Jan 1, 1981