Search Documents

Direct seeding or regeneration of vegetation in Australia has been occurring in nature for about 400 million years! From the 1870's till the 1930's, direct seeding by man was used in the south-west of Victoria as a method of re-establishing native vegetation on broadacre farmland. The introduction of improved exotic pasture grasses and the wide-spread use of superphosphate from the 1930's lead to its demise as a farmland revegetation technique.

Jan 1, 1992

The complicated mining-geological conditions in the Kuzbass have led to some difficult mining situations in the past. Now, with historical data, supplemented by geomechanical information and measurements, together with an appropriate kinematic theory, a more reliable basis exists for prediction and control of the geomechanical state during extraction, with caving and with backfilling. Continued progress and improving reliability comes from data banks and computations, and now prediction of geomechanical situations is upgraded by more routing measurements and monitoring. Not only in the Kuzbass, but throughout the USSR, 14 dedicated groups are ready to solve various specific problems of prediction an control of geomechanic situations with assured increase in the quality of mining.

Jan 1, 1991

By Seedsman R

The fundamentals concepts of roof support are similar between coal mining, metal mining and tunnelling and yet there are different design approaches, different hardware, and different levels of site investigation. This should not be the case and this paper discusses the key geotechnical issues that should underlie all roof support design - the need to reinforce defects. A design method to build a beam in laminated rock under high horizontal stresses is presented. The method allows for changing rock strengths, defect properties and varying horizontal stresses. At one level the design can be implemented with design charts and tables. Lessons learnt during the implementation of the designs at 5 different mine sites are Discussed.

Jan 1, 1998

The impact of computers on the mining industry has increased for the past twenty years in most parts of the world. The application of computers in the mining industry has been demonstrated in areas such as geological data analysis, ore reserve estimation, mine planning, and manpower training. There is also a general concern in this country regarding the computing background of graduating mining engineers from the Australian higher institutions of learning. This paper describes specific steps which have been taken at the Department of Civil and Mining Engineering, The University of Wollongong to provide adequate computing background to mining engineering graduates. Specific topics discussed include hardware and software available to students and how "computers" have been integrated into the mining engineering course.

Jan 1, 1986

By Rawlings C. D

An assessment is made of the potential for thick seam underground mining of black coal in Australia. A brief summary is given of the geomechanical environment and previous mining history existing in a number of areas of particular interest from the point of view of thick seam mining. A classification of thick seam mining methods is presented with emphasis on the critical geomechanical para- meters influencing the performance of such methods. A summary is made of perceived geomechanical research requirements related to thick seam mining in Australian coalfields.

Jan 1, 1980

Organic dyes such as nigrosine and sun yellow act as depressants for carbonaceous particles in the, flotation of sulphide ores. Depression is achieved when initially hydrophobic organic surfaces are made hydrophilic by preferential adsorption of dye molecules. Experimental studies, mainly on Mount Isa ores, indicate that dyes are adsorbed as planar anionic micelles attached to carbonaceous surfaces by van der Waals and ion exchange attractive interactions. Relationships appear to exist between the amount of organic matter on the surface of ground particles, the surface area of the particles, the "saturation" adsorptions of dyes, and the degree of difficulty experienced during froth flotation.

Jan 1, 1975

By Pirvics AI, Whitworth NR, Tuppurainen JMI

Process control applications to the unit operations in both the Lead and Copper Smelters are reviewed. The basic aim of this control is to smooth plant inputs to produce an output of consistent quality in terms of chemical composition, temperature and physical properties. Most effort has been put into the process bottlenecks, namely in the process baghouse of the Lead Smelter and in the Copper Smelter reverberatory furnaces. The method of approach is discussed, firstly extensive plant measurement and data logging plus identification of factors which most affect the unit operation and secondly control of these factors to smooth out variations. This has been possible due to the development in-house of on-line instruments to measure the critical variables and the external use of computers for plant control. Some of these instrument developments are also briefly discussed.

Jan 1, 1984

The metallurgical works of the Electrolytic Zinc Company is situated on the Derwent Estuary, approximately five miles north of the city of Hobart and near a relatively dense housing area. Zinc concentrates, consisting chiefly of zinc and sulphur, have been roasted at Risdon for 53 years;- recently at rates of 1, 100 tons per day. The zinc content of the ores is converted to zinc calcine (ZnO), which is a dusty material. The calcine is leached with acid to form zinc sulphate, which is then electrolysed to make zinc. The sulphur is oxidised during roasting to sulphur dioxide, part of which is converted to sulphuric acid and part is dissolved in estuarine water which is then discharged to the Derwent Estuary. Photographic slides were exhibited showing the unaffected green flora of the nearby hills, of clear exit stacks, of green lawns, and of a w ll lrcnt nines hnlP anlf nniir.qa within the Wnrka hnnnrla_rv_

Jan 1, 1971

Portland cement is a finely ground mineral powder obtained by intergrinding a mixture of 95 parts of clinker and five parts of gypsum. It is the generic name for hydraulic cement a man made product which hardens in the presence of water. Today's cement started formally with a patent granted in 1824 to Joseph Aspdin, a Leeds bricklayer. He called his patented cement 'Portland' because it resembled a gray brown stone quarried on the Isle of Portland off the coast of England. The first cement to be made in the southern hemisphere is accredited to Nathaniel Wilson, a pioneer farmer who with his brother John began experimenting in 1874 with the limestone on their property near Warkworth. In 1884 they produced the first Portland Cement to be made in this part of the world.

Jan 1, 1978

To grow a mining company today is seen to be challenged by the reduced interest in resources companies by the financial markets, the complexity of native title and a somewhat depressed commodity cycle. However, the opportunity to grow production and sales in a mining company are as numerous as they have ever been. It is the challenge of growing significant shareholder value that is difficult. The distinction between growth in æcompany sizeÆ and growth in æshareholder valueÆ is an important distinction upon which some resource companies are now firmly focussed. The equity market/commodity market cycle can provide windows of opportunity to consolidate and expand a company for the benefit of shareholders. These benefits may not be reflected until more buoyant equity markets return but, as the cycle turns, as it surely will, those with the foresight to position themselves may be richly rewarded.

Jan 1, 2000

By C D. Ogg, P B. Pope, K M. Lynch, B K. C

Iron-reducing bacteria are able to couple the oxidation of an electron donor to the reduction of Fe(III) to Fe(II) under anaerobic conditions in the generation of cellular energy. Recent evidence suggests that these bacteria are phylogenetically diverse and widely distributed in nature. Our laboratory has isolated thermophilic, thermotolerant and mesophilic iron-reducing bacteria from numerous petroleum reservoirs with varying conditions, groundwaters of the Great Artesian Basin (GAB), and petroleum-contaminated soils. Some of these isolates have been identified as novel species and from genera such as Deferribacter, Bacillus, Alkaliphilus, Clostridium and Thermoanaerobacter. Further investigations have shown that these bacteria are metabolically diverse, not only capable of reducing different metal species but also able to use a range of organic compounds, including polycyclic aromatic hydrocarbons, for growth. Due to their abundance and metabolic capabilities, it is possible that iron-reducing bacteria may be important in microbially-enhanced oil recovery processes and in the bioremediation of contaminated soils and aquifers, particularly in anaerobic zones.

Jan 1, 2004

The report by Baker (1958, p. 27) of krennerite in contact with gold in a specimen from the 2500 ft level, Phantom South lode, Great Boulder mine, Kalgoorlie, led the writer to look into this further, since Cabri (1965) reported that the assemblage krennerite-gold was unstable between 238° and 356° C, and possibly down to room temperature.Dr. G. Baker very generously provided the writer with two chips from the same rock specimen (No. 14 as labelled from the mine) in which the krennerite gold assemblage was reported to occur. These were examined by polished section and x-ray diffraction techniques and returned to the classified collection of the Mineragraphic Investigations Section of CSIRO.One specimen, showing visible gold, was examined optically with a binocular microscope and telluride material was twice removed from contact with the gold for x-ray diffraction. This material proved to be petzite and so amends a statement by Baker (1958, p. 39) that no petzite was found in the Phantom lodes.The second chip was polished, and microscopic...

Jan 1, 1967

By Gabriella Mendez

Worthy of note in Miss Bailey's paper are her comments on the attitudes of mining companies and their managers where women were employed, she says, "..another possible pitfall is reverse discrimination where in an effort to avoid being branded as having shown a person favouritism, supervisors end up treating the person in a manner much less than they deserve. This is manifested in denying an employee such things as challenging work, educational opportunities, promotions, or in the case of staff, fair merit increases." and further she says, "It has been observed that the treatment of women in non-traditional roles such as mining is different than for men in the same environment. There are people who treat women worse and some who treat them better simply because they are of the other sex." These statements may sound unjustified to today's audience, and whilst we need to credit pioneering women with having tolerated, understood and worked towards improving the mining culture, the move towards total inclusion of women in the workplace is still growing.

Jan 1, 1995

The process of defining the external environmental costs of mining activities, devising appropriate mechanisms to internalise them is complex and is likely to be a gradual.Australia's competitiveness could be seriously affected if , in terms of incorporating environmental costs, we were to exceed other resource producing nations.Australia has a great deal at stake in the debate and therefore we need to proceed carefully and be fully aware of the environmental and economic issues.

Jan 1, 1992

Minerals are of course important to our way of living and hence the search and exploitation of minerals has always had a high priority in Australia. Metal mining commenced in South Australian in the 1840s when silver-lead and copper were first mined. This was Australia's earliest mining era and led to the rush that never ended. This and subsequent mining periods have had significant, widespread impact on local and national economic development, settlement, and social conditions.

Jan 1, 1993

The blasting of the 2190_6095 stope at Kimberley Nickel MineÆs Sally Malay operation in Western Australia is an example of what can be achieved with electronic detonating systems when a drill and blast engineering team is faced with complex blast geometry and a major pump station in close proximity to the stope. Using Dyno NobelÆs HotShotÖ system, the engineering team successfully designed and initiated the 36.5 Kt stope firing, with a powder factor of 0.35, resulting in no damage to the pump infrastructure, better fragmentation of the ore and less overbreak in what had previously been a geotechnical and geometrically challenging stoping environment. This paper will discuss the design parameters used for this stope blast as well as the benefits the operation found in using precision detonator timing in this 252 hole shot over two levels using a combination of up and down and slashing rings that were initiated in four different directions.

Jan 1, 2007

By Bell MG

At various decision points in the development of a project, a developer, joint venture partner or financial institution may require an independent review of the basic assumptions and technical aspects of the project. This type of review or technical audit is becoming a more common feature of the project development process. This feature has evolved because of the need of investors and lenders to be more confident of the viability of a project by the confirmation of its technical and cost aspects. Technical Audits offset some uncertainties introduced by the combination of longer development periods for, projects and the highly dynamic world economic scene. This paper reviews the place, nature and process of the technical audit by examining the circumstances when it might be needed, the typical scope of work or brief, the responsibilities of and relationship between the auditor and the client, and the auditing procedure. Detailed aspects of technical audits are discussed followed by a case study of the Hail Creek Coal Project Audit.

Jan 1, 1983

Over the last five years the :forward momentum in the Australian resources sector has been dominated by gold production and exploration companies. While reporting of exploration results to shareholders and Stock Exchanges has generally been detailed and responsible, the standards of reporting ore reserves still leaves much to be desired in terms of contemporary investor expectations. Australian gold ore reserve reporting practices are critically examined and suggestions are made as to how gold mining companies can enhance stock market recognition by investors through more informative and useful Reporting.

Jan 1, 1987

Dynamic hydrothermal modeling is a tool that can aid in studying problems associated with hydrothermal ore deposits and can help increase our understanding of the spatial distribution of ore within hydrothermal systems. Models are constructed by a sequence of steps involving development of a conceptual model, followed by its mathematical description in terms of governing equation with accompanying initial and boundary conditions. This equation is then solved either analytically or numerically. The four model types ò that fully describe a hydrothermal 'system are those for fluid flow, heat and ore solute transport, and deformation. At Renison, models have been used to help understand two major exploration problems. These are the controls on ore localisation in dolomite horizons and feeder faults respectively. The types of models used ò have simulated the distribution of all mineral zones, pyrrhotite, and temperature in the dolomites. This has allowed evaluation of the effects on ore localisation by physical and chemical heterogeneities within the dolomite host rocks, and allowed estimation of potential controls in different physical and chemical environments.

Jan 1, 1987

The ore body being worked is about one hundred feet in length by seventy feet in width. A face of about fifteen feet is stoped over the whole level at one operation, this height standing without any timber.Double lines of logs, twenty feet in length and from ten inches to one foot in thickness at the small end, are then laid longitudinally, butt to butt, and breaking joint from end to end of the ore body they are at ten feet centres from wall to wall. The starting logs are single for the first ten feet and their ends are hitched into the solid rock. These are called "miners" and are the logs which are picked up as the level underneath is worked up. The double layer gives a better chance of picking up. Logs are now laid from the centre of the ore body at right angles to the miners, the ends being hitched into the walls. A space, seven feet wide, is left open right through the centre of the ore body...

Jan 1, 1904