Search Documents

By F. J. Klingler, R. Hausmann, K. M. Swaffar, J. C. Neyer

This paper presents the results of a study of case histories of projects on which sinking caissons were used to construct shafts for tunnel construction and other underground works. Design methodologies are reviewed with respect to the impact of soil and groundwater conditions on the performance and constructability of sinking caissons. Factors which have led to success or failure are reviewed and evaluated, and recommendations for future investigation, design and construction activities are presented. Cost data for five recent projects are reviewed and compared to the cost of shaft installation by other means.

Jan 1, 1997

By Louis H. Berkelhamer

"INTRODUCTION ""Free silica"" includes all free forms of silicon dioxide, such as quartz, chalcedony, tridymite, cristbbalite, opal, diatomaceous earth, and lechatelierite. The term, has been used rather loosely however, as synonymous with quartz, as quartz is the most abundant form of free silica. ""Combined silica,"" on the other hand, has been reserved to denote silica combined with other elements as silicates.Improvements in methods for the determination of free silica, and quartz in particular, have been the subject of considerable interest during the past decade, owing mainly to the accented and increased knowledge concerning quartz as a causative factor in silicosis. Analysis for quartz, however, is of importance in many other fields, including the determination of quartz in ceramic raw materials, such as feldspar and clay; the evaluation of a beneficiation procedure by the ore dresser, such as in the concentration of iron ore; control studies of a manufactured product, such as silica brick; and routine analysis of rock, mineral, and ore samples by chemists and petrographers."

Jul 1, 1944

By Wu Liu

A modified falling ball technique for measuring the viscosity of liquids is described. It consists of recording the weight vs. time of a crucible holding the liquid of unknown viscosity, as a solid ball, or liquid drop, is let to fall through the liquid. This method does not require measurements at constant terminal velocity, as the conventional falling ball technique. Also, measurements do not depend on visual observation, which is not possible in opaque liquids or containers. The effect of process parameters on the utility of this method and its potential application to liquid systems of metallurgical interest were analyzed theoretically. The paper also com- pares the gravimetric method to the conventional falling ball technique for measuring viscosity.

Jan 1, 1992

By Rodrigo Alberto Moreira Gomes

São apresentados os resultados da instalação de uma câmara de combustão compacta para a substituição de óleo combustível por coque de petróleo, em um sistema de secagem e moagem de minério de níquel denominado Usina Sul, instalado na Unidade de Niquelândia – GO, da Votorantim Metais. Esta nova câmara de combustão, desenvolvida em parceria com a Dynamis Engenharia e Comércio, atingiu eficiências de queima acima de 95% (comprovada por medições realizadas em Planta Piloto). Além de elevada eficiência de combustão, esta câmara compacta possibilitou que se atingisse o patamar de 100% de substituição de óleo por coque de petróleo, representando ganhos significativos no custo da Unidade. Ganhos também foram observados na vida do refratário da câmara existente, denominada câmara VMN.

Jul 31, 2018

By Fábio Dian Murari

Investigou-se neste estudo, em escala de laboratório, o efeito do tempo de encharque de placas na dissolução de precipitados e nas propriedades mecânicas de aços microligados ao Nb e Ti, produzidos como chapas grossas. Para as temperaturas utilizadas, verificou-se que a aplicação de tempo de encharque de até 50 min, após o reaquecimento com tempo de permanência de 250 min, não exerceu influência significativa nas propriedades mecânicas dos aços investigados. Este resultado foi associado à dissolução total de precipitados finos (< 100 nm) durante a etapa de aquecimento e à desprezível dissolução durante a etapa de encharque de precipitados grosseiros, localizados principalmente no centro da espessura da placa, em regiões de microssegregação.

Oct 30, 2017

By R. Hurman Eric

Within the Ag-Pb-S ternary system, the boundaries of the immiscibility region together with the tie-line distributions were re-established at 925°C by the equilibrium-quenching technique where samples were kept in evacuated and sealed silica capsules. Activities of Pb were measured by the dew-point method along the Ag-Pb binary at 925°C, 1100° and 1200°C. positive deviations were observed and the results were modeled by the Krupkowski formalism. Activities of Ag, Pb, and S, along the ternary miscibility gap were calculated at 925°C by utilizing the boundaries binary thermodynamics, phase equilibria and tie-lines. Activities of PbS within the pseudobinary Ag2S-PbS mattes were also measured by the dew-point technique and the results were again modeled by the Krupkowski formation Where negative deviations were observed.

Jan 1, 2003

By Claudio Marcio de Araujo

O trabalho apresenta o estudo e resultados da aplicação do dessulfurante micronizado Puresteel-1000, seus benefícios, economia e melhoria do processo de dessulfuração. Objetivando redução de custo e manutenção nos parâmetros operacionais a CSN desenvolveu junto a um fornecedor um dessulfurante a base de CaO que favoreceu o atendimento com redução de custo .A metodologia utilizada para o trabalho foi à avaliação do sistema produtivo da EDG-CSN, e o estudo de solução para o processo apoiado na revisão bibliográfica do tema. A implantação da aplicação do dessulfurante micronizado Puresteel-1000 obteve para a CSN ganho através da redução de custo de aproximadamente 30% no custo do dessulfurante, mantendo os mesmos parâmetros operacionais.

Jul 29, 2018

By John H. Soule

The Torpedo Copper mine in the Organ Mining District, Dona Ana County, N. Mex., was discovered In 1899. Production was begun immediately and continued until 1907. Since 1907 very little ore has been produced, although Many individuals and companies have been interested in the property at one time or another. Approximately 6,621 feet of diamond-core had been completed on the property before 1949. The results from some of this drilling were unsatisfactory because of the poor core recovery. In addition to its investigation of the Torpedo ore deposits, attention was given by the Bureau of Mines to obtaining better core recovery through the use of special equipment and techniques. This project was begun October 3, 1949, and was completed April 30, 1950. Four diamond-drill holes totaling 2,140.5 feet, which includes 18.2 feet of overlap in a deflected hole, were drilled. All drilling was done with a Government-owned hydraulic-feed drill with some special rods and core barrels, in addition to the usual equipment. The over-all core recovery was 89.5 percent. Omitting the drilling in overburden where little or no core was desired, the recovery was 94.6 percent. Core recovery in the ore zones averaged 95.2 percent. This paper describes the location, the general features of the area, the geology, the Bureau of Mines procedures, and the results attained by these procedures.

Jan 1, 1952

By Felipe Fardin Grillo

A cal e a fluorita são os principais componentes das escórias dessulfurantes. Entretanto, a busca por tecnologias consideradas menos poluentes vem tomando espaço neste setor. Dessa maneira, a necessidade de desenvolvimento dos processos faz com que as usinas siderúrgicas busquem melhorias no processo. Neste contexto, este trabalho tem como objetivo realizar um estudo de substituição da cal convencional por resíduo de mármore e também da fluorita por aluminato de cálcio. Os ensaios foram realizados a 1.600°C e as amostras foram retiradas periodicamente durante 25 minutos afim de se avaliar a dessulfuração ocorrida no metal. Os resultados indicam a viabilidade da utilização do resíduo e do aluminato de cálcio em escórias dessulfurantes para aço.

Aug 8, 2018

By João Vinícius de Souza Vares

O presente trabalho apresenta um estudo acerca da trefilabilidade de arames de aço semelhante ao SAE 1045, que são destinados ao atendimento da demanda do setor agropecuário. O trabalho envolveu a análise da produção dos arames a partir de matéria-prima advinda de aciaria elétrica, além das condições dos processos de conformação. O processo de trefilação foi mantido invariável, com as mesmas condições e parâmetros de reduções e lubrificação. Verificou-se a viabilidade de trefilação de ambos os materiais e a influência da maior fração volumétrica de perlita, através de análises conjugadas de propriedades mecânicas e condições microestruturais, resultando em valores mais elevados de resistência mecânica e menores valores de alongamento para os arames.

Oct 30, 2017

By Ricardo Melo Pereira

Este trabalho tem como objetivo avaliar modelos de simulação, construídos através do software Talpac® em uma mina a céu aberto, a fim de analisar através de distribuições de probabilidade com o uso do software Minitab®, alguns parâmetros que influenciam diretamente a produtividade dos caminhões fora de estrada. Dentre estes parâmetros, os principais são: Carga média dos caminhões, velocidade média, número de viagens por hora de trabalho e tempo médio de fila na carga. Ao final, os dados de produtividade dos caminhões obtidos no modelo, serão comparados aos dados reais da mina, obtidos através do sistema de gerenciamento de frota Smartmine®, podendo este modelo ser validado ou não, tanto em termos de produtividade quanto dos demais parâmetros.

Aug 16, 2017

By John C. Machisak

INJURY DATA and experience at coal mines in the United States for 1957 are presented in this bulletin under the following general sections: (A) General injury experience: Tables 1-6: Current data on number of fatal and nonfatal injuries, frequency and severity rates, and average severity. (B) Selected injury experience: Tables 7-36: Current data on causes of injuries, distribution of injuries by part of body injured, days of disability, extent of hand and machine loading, experience by employ¬ment and production groups, and various other operating factors and physical conditions related to the occurrence of injuries at the Nation's coal mines. (C) Injury experience, by States: Tables 37-41: Data on injuries, injury rates, employment, causes of injuries, and severity rates. (D) Major disasters: Table 42: Data on major disasters from 1948 to 1957. A major disaster is defined as a single accident in which, or as a result of which, five persons or more are killed instantly or die at any time thereafter. (E) Historical coal-mine-fatality experience: Tables 43-47: Data on fatalities and their causes at bituminous-coal, lignite, and anthracite mines from the earliest records through 1957.

Jan 1, 1960

By Torben Ulisses da Silva Carvalho

A têmpera é um dos tratamentos térmicos mais utilizados nos aços, visando o aumento de sua dureza a partir de mudanças drásticas em sua microestrutura. A fim de aliviar as tensões provindas desse tratamento, realiza-se o revenido, fazendo com que o aço obtenha propriedades mecânicas viáveis ao uso. Este trabalho teve como objetivo realizar os tratamentos térmicos de têmpera em água, salmoura e óleo e, posteriormente, o revenido no aço SAE-4140 fornecido pela SINOBRAS, uma siderúrgica de Marabá-PA. Foi realizada a caracterização microscópica das amostras antes e depois dos tratamentos, sendo possível visualizar as mudanças na microestrutura do material, além da confirmação do aumento de resistência mecânica através do ensaio de dureza.

Aug 16, 2017

By Joseph Chalmers

Stimulative methods of production, whereby the total recovery of oil from natural reservoirs is increased, have come into considerable prominence during the past 15 years. In many oil-producing areas properties considered ready for abandonment by ordinary producing methods have responded to some form of stimulation, and their economic lives have been extended. The stimulative method having widest application is the injection of air or gas into the reservoir formations through selected input wells and is commonly referred to as the "gas drive." As a result of the many successful "gas-drive" operations operators are depending more and more upon this method for increasing the ultimate recovery of oil from their properties. A number of factors influence the efficacy of different gases as propulsive agents in recovering oil from sands. Gases of high density and viscosity show a tendency toward a slightly higher efficiency than those of lower density and viscosity. The solubility of the gas in the oil also affects the efficiency of oil recovery. Not only does dissolved gas decrease the viscosity of the oil, but dissolved gas that expands from solution in the oil tends to increase the effectiveness of a "gas drive." Interfacial tension between the oil and the gas and its effect upon the recovery of oil by gas injection are factors of which little is known. Dr. A. G. Loomis expressed the opinion that interfacial tension probably plays a minor role in the recovery of oil, except under conditions that produce a gas-oil foam. In connection with the above physical properties that influence the action of a pressure medium, control of the injected volume of the pressure medium is perhaps the major factor. The rate of gas injection determines to a great extent the amount of slippage and the resulting efficiency of the operation. The importance of volume control is realized when one considers that frequently it is the only factor that is under complete control of the operator.

Jan 1, 1930

By Pedro Lucas Freitas

A elaboração de planos de mistura é feita em uma coqueria para uniformizar a qualidade das misturas. Um problema recorrente é a distribuição destes carvões nas dosadoras para serem misturados. A distribuição, no plano, destes carvões nas dosadoras é feita de forma manual, levando em consideração apenas o conhecimento do operador. A proposta é apresentar uma modelagem matemática de programação linear para resolver o problema da distribuição de carvões em dosadoras, segundo restrições de utilização das dosadoras dentro da faixa ótima, composição da mistura e uniformização das correias transportadoras, para reduzir sobrecarga nas linhas de dosadoras, com a finalidade de execução de um plano de mistura de carvões. Foram utilizados métodos de pesquisa operacional utilizando o algoritmo Simplex.

Aug 16, 2017

By Lidia Rangel Roveta

O processo de aciaria da ArcelorMittal Aços Planos América do Sul tem um abastecimento de diário de Cal em torno de 420 ton. O processo de abastecimento deste produto, que consiste da programação, liberação de portaria e descarregamento não estava satisfatório, considerando o tempo de permanência de caminhões na portaria aguardando liberação e consequentemente custos com diárias e alimentação. Visando otimizar este processo, a partir do resultado da analise dos procedimentos de descarga, utilizado atualmente, foi implementado como plano de ação um sistema automatizado de agendamento de descarga de Cal que, após 15 dias de implantação resultou na redução de 66% no custo de pagamento de diária, além de previsão de ganho futuro em frete.

Aug 16, 2017

By V. L. Eardley-Wilmot

Diatomite as prepared for the market is a fluffy, white powder, remarkably light in weight-it weighs only 10 to 15 pounds per cubic foot, or one-tenth as much as sand. Being extremely porous and inert, it is in large and increasing demand for insulation and filtration purposes, as general filler, and for many other uses. Structure Structurally, diatomite is quite different from any other known commercial material. It is composed of myriads of microscopically small, siliceous shells of diatoms which belong to a group of flowerless aquatic plants called algae. When these plants die, the siliceous remains sink to the bottom of the water and form beds of diatomite. Over 8,000 species of diatoms are known, named, and tabulated. The intricate scroll-work and patterns on many of these are one of the marvels of nature, and yet so small are they that from 40 to 70 million separate diatoms may be contained in one cubic inch of material. However, the size and shape of these diatoms, which vary greatly (compare Figures 5 and 6), have an important bearing on the commercial use of the diatomite. The diatoms in the majority of the known deposits are so typical of that deposit that, after a micro-examination, an expert can usually tell not only from what part of the world, but also from what particular deposit, the sample has come.

Jan 1, 1931

The Myra Falls minesite, of Westmin Resources Limited, is located at the geographic centre of Vancouver Island, within the confines of Strathcona Provincial Park. The operation includes two active underground mines, II-W and Lynx, together with a modem 3650 1/d milling facility. Recent exploration successes will lead to the commissioning of a third mining area in late-1993 - The Battle/Gap Mine. These ore deposits are complexly metal-zoned volcanogenic massive sulphides of Devonian age, hosted in the Myra Formation of the Sicker Group volcanic assemblage. Three distinct felsic volcanic units are defined within the 450 metre thick Myra Formation. They are, from oldest to youngest, the H-W Horizon, the LMP Horizon and the Upper Rhyolite Unit. Massive sulphide mineralisation occurs throughout the property in the H-W and LMP Horizons. There are a number of orebody types, including polymetallic massive sulphides, polymetallic disseminated sulphides, zoned pyritic massive sulphides, elastic sulphide zones and stringer sulphide zones. Individual orebodies range in size from 10 000 tonne zinc-rich polymetallic lenses to the ten million tonne, zoned massive sulphide H-W main lens. The property has been in continuous operation for 26 years, producing over 13 Mt of ore averaging 2.2 g/t Au, 64.0 g/t Ag, 1.9 per cent Cu, 0.6 per cent Pb, and 5.6 per cent Zn. Current geological reserves stand at 12.5 Mt at a comparable grade, including 4 Mt of recently discovered high grade ore in the Battle and Gap Zones. Mining and milling methods have evolved over time to enable successful extraction and milling of these complex ores. Change is on-going with the recent conversion of the H-W Mine to large-scale bulk mining methods, and the development of effective computerised ore reserve calculation and mine planning tools. These changes, in concert with successful exploration techniques that led to recent high grade ore discoveries, have breathed new life into the operation and should assure its present and future viability.

Jan 1, 1993

By E H. O Meyer, K van Dyk

Fine powders normally exhibit, to a more or lesser extent, some ability to participate in dust explosions. Zinc dust as used in the extractive metallurgy of zinc, is not known to be a reactive powder in the industry. No evidence could be found in the literature where zinc dust was involved in an explosion or explosive type event. On 3 May 2002 an explosive type incident occurred at Zincor in Springs, South Africa, which led to a fatal accident. Given the history of relative benign behaviour of zinc powders under conditions conducive to dust explosions, it was decided to share the information of this incident with industry in an effort to prevent similar incidents. Therefore, the purpose of this paper is to describe the incident that occurred at Zincor, discuss the major findings, report on corrective actions, as well as publish the results of subsequent tests that were performed to determine the conditions under which zinc powder exhibits explosive characteristics.

Jan 1, 2005

By J. R. Shultz, R. J. Lambert

One of the present trends in the mining industry is the increased use of mining contractors. In the past, many project owners have utilized mining contractors for topsoil stripping or overburden removal, usually on a short-term or periodic basis. In recent years, mining contractors have not only removed the overburden, but mined the product as well. Why is this change occurring? A prevalent trend in the mining industry appears to be the outsourcing of non-core and non-strategic functions, allowing producers to focus more on areas of technical expertise where higher incremental value is added—that is the processing, refining, and marketing of the product. As capital allocation becomes more critical, this trend is likely to continue.

Jan 1, 2002