Search Documents

Away from past controversial presentations, a matter of fact, intuitive and simplified approach to the Theory of Sampling (TOS) sampling variance prediction formula is offered which gives an insight on the type of model required for the liberation factor, the practical limitations of such model and methodological principles for its calibration. This paper intends to see what happens in TOS when trying to go from the very simple towards the full level of real life complexity, and actually tries to answer the question: Is there such a thing as a æsimpleÆ TOS?

Jan 1, 2005

The design of the grinding section is discussed and details are given of the equipment installed for the autogenous grinding of ores from the C.S.A. mine at Cobar.The first section of the concentrator commenced treating ore in June, 1965 and operating experience and maintenance requirements since that time are outlined.

Jan 1, 1969

Following plant trials in 1972 Mount Lyell installed an AMDEL On Stream Analysis system for measuring copper and density on the flot- ation feed and final plant tailing streams, in August 1973. As a result of poor performance of the final tailing system these probes were changed over to the rougher tailing stream, back to the final tailing stream and finally to the final copper concentrate stream where the system is currently performing satisfact- orily. The history of the development of the system to its current operational status is Described.

Jan 1, 1978

Arm Royalty systems of different types are used throughout Australia by both state and federal governments to raise revenue and thus facilitate in the proper distribution of mineral wealth. Royalty systems should be neutral and equitable but by their very nature these objectives are impossible to obtain. Because of the individual nature of mineral deposits, in particular variable cutoff grades and tonnages, governments should be aware of the possible trade off between short and long term gains of the particular royalty scheme introduced.

Jan 1, 1982

By Toffeg A. N, Abdul-Hameed I

More than 1000 Ian of seismic reflection data correlated to ten exploration wells along with geological, gravity and magnetic data are used to construct the subsurface structure, in particular the crystalline basement, along a corridor approximately 100 Ian wide that traverses central Iraq in SE-NW direction for a distance of about 500 km from Baghdad in the central part of Iraq to Dohuk near the Turkish border. This transect is one of few such transects that represents the Iraqi contribution to the Global Geoscience Transects (GGT) project. The transect crosses two out of three major tectonic elements of Iraq: the unfolded zone and the folded zone.

Jan 1, 1990

The Airport Link Railway utilises innovative solutions to a number of issues associated with underground development and transport infrastructure planning. It is typical of the major change underway in the countryÆs rail and air transport industry. It involves the private sector providing transport facilities in competition with the public sector, a convergence of planning and transport imperatives, the use of the most technologically advanced engineering practices to minimise construction impacts on the community and a commercialised way of developing and maintaining railway infrastructure and services.

Jan 1, 1999

Preparing for automated sample preparation has two facets; the need for better procedures as seen by the laboratory Manager and the approach to be adopted as envisaged by the equipment manufacturer. Both have many options and during the 1990s some at least of these options will be tried. As automation of sample preparation is only just beginning, can it be said that there is a real need for better procedures. What does automated sample preparation have to offer? Does it have real advantages or is it just a marketing tool to sell equipment?

Jan 1, 1976

In the face of intense global competition and other business pressures on coal miners, ongoing quality initiatives and continuous process improvements are needed to enhance business performance. By viewing a minesite in terms of key processes, rather then departments, and employing innovative technologies and better applying organisational resources, there exists enormous potential to achieve reductions in process cost and time.

Jan 1, 1998

While international coal trading operations often involve relatively small contract quantities, delivered over short periods or even in single shipments, most coal is supplied under long term arrangements. In entering into these arrangements the customer needs to be assured that coal of suitable and consistent quality can be supplied for their duration in the volume required. A detailed knowledge of the mine and transport system is required and must be presented from the customer's perspective.

Jan 1, 1983

By Warner B. D

Smelting at Mount Morgan started in 1906 with blast furnaces which were replaced by a reverberatory furnace in 1939. The second reverberatory, commissioned in 1944, was replaced by a copper flash smelter in 1972. Flotation concentrates, dried to 0.05 per cent moisture, were oxidised under accurately controlled conditions and produced 45 per cent Cu matte and a slag in the flash smelter. The matte was converted to blister copper and the slag was slowly cooled before grinding and retreatment in a flotation concentrator.

Jan 1, 1974

During a mineral exploration programme in an environmentally sensitive area near Mount Painter in South Australia, a helicopter was used to position, construct and service drilling rigs in order to avoid the need to create new access tracks. The drilling programme was designed to optimise the advantages of natural landforms in order to minimise the environmental impact of site construction and drilling activities. This minimisation of land disturbance reduced the required amount of rehabilitation measures to the extent where all impacts of the helicopter-supported programme had disappeared within twelve months of completion of work.

Jan 1, 1995

Hydrocyclones are widely used in both mining and various industrial sectors. Considerable fundamental research work on the modelling of hydrocyclone classifiers has been carried out through the past 25 years. Based on the similarity principle, the hydrocyclone classification was taken as a whole physical process and a group of similarity numbers were obtained with the help of dimensional analysis in this paper. Then, the functional dependences of the similarity numbers have been established. The variables optimisation was carried out with the multiple objectives linear planning programs developed in this study.

Jan 1, 1993

Samples weighing O·25 g are fused with 1 g potassium hydrogen sulphate, leached with 5 ml. of hydrochloric acid, and then diluted with another 5 ml. of acid. After settling, an aliquot of the clear solution is reduced with stannous chloride, and then a zinc dithiol solution is added to form a coloured tungsten complex which is extracted with petroleum spirit for comparison with standards.Concentrations down to 4 p.p.m. may be analysed at a rate of 100 determinations per man-day of 8 hr.

Jan 1, 1970

The design of drawpoints in caving and stoping mines has a significant impact on the productivity of the operation. Drawpoints must be designed to provide uniform drawdown and maximum recovery of the broken ore within the limits imposed by the dimensions of the stope, the stability of the pillars, the method of draw, material flow characteristics, etc. The design of drawpoints historically relied on the mining engineerÆs experience and intuition. However, in many operations, empirical analyses have also produced important information regarding design geometry. Factors that affect the sizing and spacing of drawpoints are discussed and guidelines are provided for their design in order to obtain maximum recovery of broken ore and reduce hang-ups.

Jan 1, 2000

Two recently published studies have considered whether and how robots, which have been designed for manufacturing applications, could find use in mining. The conclusions of both studies, if not identical, are compatible. Automation of mining activities will continue. Robots, at least in the short term, will have little application in mining. However, robotic concepts, both hardware and software, are of considerable relevance to mining automation, and can be anticipated to diffuse gradually into mine environments. The present paper is intended to convey the current state of thought on this subject to IFAC Symposium participants who may be unfamiliar with the referenced studies, and is not intended to report previously unpublished research.

Jan 1, 1985

The BHP Steel Group embarked on a Total Quality Control (TQC) programme in 1984 in response to enquiries from a major customer regarding procedures for quality in materials supply.The TQC initiative has been adopted by all seven Divisions of the Steel Group and covers a broad and comprehensive range of management and workforce improvement initiatives.The development of the TQC initiative in the Collieries Division of BHP Steel over the past eighteen months has resulted in important experiences and leanings.

Jan 1, 1991

By Bounsombath P

Underground mine development remains as one of the most important factors in cost effective mining. Various forms of continuous development have been proposed with some of the earliest conceived centuries ago.The bore, fire and muck approach remains, in the late 20th century, as the predominant method of underground development, despite intense efforts over the past decade or so to develop other systems.Following a comprehensive analysis of development in the Australian mining industry, the reasons why the traditional development cycle has remained unchanged are identified and potential directions for the future are suggested.

Jan 1, 1992

The accepting of the geologist as part of the mining industry team has only become a reality in the last fifty years in Australia. Commencing in the 1920's it received a check in its progress during World War II. Since then it has had its highs and lows to extremes not hitherto experienced. The recent mining boom and the succeeding slump have provided opportunity to examine more critically and positively the role of the geologist in the mining industry. The future is examined, not in crystal ball fashion, but in terms of selected specific aspects. Suggestions are offered concerning these aspects.

Jan 1, 1976

A unique set of circumstances has devel oped in the Mt. Newman Mining Co. Pty. Limited's project in the Pilbara because the mining town of Newman was built almost entirely by the Company whereas residential areas built by the Company at Port Hedland were developed as an adjunct to an existing town. The following discussion points out the different problems which have been developed in the two areas, even though basically the stand- ard of housing and general amenities is the same, and the means taken to overcome these Problems.

Jan 1, 1973

By Jin C, Shi X

The studies of pulp electrochemical flotation separation of pyrite and arsenopyrite were made from the thermodynamics, mineral natural oxidation rate, property of mineral surface oxidised material and pulp electrochemical flotation tests. The results showed that although pyrite and arsenopyrite possessed similar thermodynamic stability, significant differences of two minerals were observed in natural oxidation rate, property of surface oxidised material and its influence to dixanthogen formation on the oxidised mineral surface. Based on the non-thermodynamic differences, the pulp electrochemical flotation technology was successfully used to separate arsenopyrite from pyrite in pilot test.

Jan 1, 1993