Search Documents

By Welch B. J

Results obtained from linear sweep voltammetry at a graphite anode in cryolite-alumina melts are presented, together with those obtained from a chronopotentiometric investigation of the influence of dissolved metal. The results, consistent with both production information and other fundamental studies, showed that the following two reactions occur at the anode.Equation 1Al (dissolved) ? Al3+ + 3eThe latter accounted for some of the loss in currentefficiency.The rate of the former reaction is limited by the slow desorption of the CO from the electrode surface. Mass transfer conditions, and hence cell design, influence the importance of the second reaction.

Jan 1, 1976

By Adamiak Z. P

A study has been made of the influence of bentonite type on the wet strengths, dry strengths and drying rates of pressed iron ore pellets. Measurements of the influence of bentonite on the kinetics of growth of pellets are also reported. The results show that bentonite decreases the rate of growth of pellets and the drying rates of pellets while increases are observed in both wet and dry strengths. The results have been interpreted in terms of the physical and chemical charact- istics of the bentonite and the suitability of a given bentonite for particular pelletising operations has been discussed.

Jan 1, 1973

By Troman L, Groutsch J. V

The Kwinana Nickel Refinery began operations in 1970 processing sulphide concentrates from Kambalda using the Sherritt Gordon pressure leach and hydrogen reduction process to produce nickel metal as powder and briquette. Over the years a number of changes have seen the refinery capacity increased from the original design capacity of 15 000 tpa nickel on an all concentrate feed to its current design capacity of 42 000 tpa nickel on an all matte feed. This paper outlines the changes in plant equipment and process for the most recent refinery expansion from 35 000 tpa to 42 000 tpa which have been implemented since 1992.

Jan 1, 1996

By R Uken G P Whitmore

The coastal dune cordon of northern KwaZulu-Natal is amongst the highest in the world reaching heights in excess of 180 m and up to 2 km in width. It comprises a complex system of Quaternary stacked dunes of various geomorphologies, types and ages. The dunes contain economic heavy minerals which are currently exploited ~20 km north of Richards Bay. Although mining of these ore sands has been in operation for the last two decades, little work has been undertken on the clay-fraction (

Jan 1, 2001

This paper examines the properties of Australian indigenous crude oil and the changes to Australian refinery process- ing required after the Gippsland crude finds in the late '60s. In addition the paper details the dif- ferent crudes available to Australian ref ineries and the relative product yields in relation to Australian crudes. Market demand for petroleum products both now and in the future is then related to the products yields. The paper also examines the impact of the OPEC induced crude price spiral and the subsequent changes in refinery engineering, current and projected market demands, and energy conservation measures both inside and outside the industry.

Jan 1, 1982

Although most N.S.W. coal mines contain large amounts of combustible materials such as coal and timber, the introduction of mechanisation has extended the range of combustible materials now found underground. The role of combustible material in a fire is not clearly understood and as a result the assessment of these materials for flammability by small and large scale tests is doubtful. Extensive research has been carried out on the toxic and irritating gases evolved during the combustion of plastics. However, most autopsies report death due to carbon monoxide inhalation because the combined toxicity of smoke and fire gases is unknown.

Jan 1, 1981

By Parsons AE, Lewis IE

Selenium is a minor constituent of the raw materials processed by the Cockle Creek smelter of Sulphide Corporation Pty. Limited. Certain proposed raw materials contain higher levels of selenium, and these will create a problem with regard to the composition of liquid effluent discharged from the smelter. A method has been developed for removing selenium from the smelter circuit by the sulphation of the fume collected in the Acid Plant electrostatic-precipitators. It is planned that by treating 10-20% of the total dust arisings there will be a substantial reduction in the levels of selenium reporting in effluents when treating selenium-bearing raw materials. The selenium is recovered in elemental form.

Jan 1, 1978

Economic mathematical methods have been developed and applied in the design, planning, development and managing stages in the mining industry. Economic and technological efficiency is achieved with the aid of a large range of probability models, which are used to enable decisions to be made progressively during the different stages. The entire operation is considered as a total system made up of sub- systems and the models representing these are consecutively interrelated with each other. Algorithms and programmes representing the economic mathematical models for all the stages involved were tested and were found to be applicable to the various important mines in the Donetsk basin. Currently, these models are accepted and widely used.

Jan 1, 1977

The complicated mining-geological conditions in the Kuzbass have led to some difficult mining situations in the past. Now, with historical data, supplemented by geomechanical information and measurements, together with an appropriate kinematic theory, a more reliable basis exists for prediction and control of the geomechanical state during extraction, with caving and with backfilling. Continued progress and improving reliability comes from data banks and computations, and now prediction of geomechanical situations is upgraded by more routing measurements and monitoring. Not only in the Kuzbass, but throughout the USSR, 14 dedicated groups are ready to solve various specific problems of prediction an control of geomechanic situations with assured increase in the quality of mining.

Jan 1, 1991

Within the Ross River Basin, the following types of water were collected and analysed; 19 streams, 24 wells and bores together with 19 samples from the Ross River Dam. The waters were found to contain up to 269 ppm of silica and, although they meet the requirements for industry in all other respects, this extremely high figure means that two basic guidelines should be followed. All steam generation units, except those less than 150 psi should employ hot lime zeolite softening, demineralization or evaporation to remove silica. Cooling systems should only operate on a once through basis.

Jan 1, 1978

The Savage River Mines concentrator and pipeline has operated for seven years. During this time some problems of general interest have been overcome, particularly in the area of autogenous grinding in large mills and in pump- ing solids over long distances. The plant flow sheet and equipment at Savage River and the control techniques are. described. Ore type has varied widely over the per- iod of plant operation. Techniques developed to minimise the effect of variations on through- put are discussed'. The main technique is the controlled rejection or addition of grinding Media.

Jan 1, 1975

Construction of Western Mining Corporation's nickel refinery at Kwinana, Western Australia, commenced in July, 1968. Production of 15,000 tons per annum of refined nickel metal will commence early in 1970, The plant will also produce approx- imately 150,000 tons of ammonium sulphate0 The ammonia leach process which was developed by Sherritt Gordon Mines Ltd., and has been in operation at their plant at Fort Saskatchewan, Alberta, Canada, for the past 15 years, will be used at Kwinana. The refinery will cost approximately 435 million, and will employ upwards of 250 people.

Jan 1, 1969

The reasons for selecting two stage pebble milling in preference to conventional methods of grinding are discussed. Commissioning of the first section was completed in October, 1969. Improvements in both the operating and engineering aspects were then incorporated in the section commiss ioned in March, 1971.

Jan 1, 1975

Many aspects of best practice resource evaluation do not create value, but poor practice can certainly destroy value. Generally companies prefer to present how their good practice adds value and for this reason few publications exist on examples of how poor practice can destroy value. However in big and small companies there are many previous and current examples of poor practice destroying value. The incremental expenditure required to move from poor practice towards best practice can be looked upon as insurance against destroying shareholder value. Examples of how poor practice in geology has destroyed value are presented as well as the improvement model used by BHP Billiton to add value and insure against destroying value.

Jan 1, 2002

Hilton Mine is located 20 km north of the city of Mount Isa and Isa Mine in far north west Queensland. The sealed road used by the 500 employees to commute from the city is part of the Barkly Highway linking Mt Isa to the Northern Territory.Although discovered in 1947, major underground development did not start until late-1982 and first cut-and-fill production in mid-1987. The J53 exploration shaft was sunk in 1970-73 and the main P49 shaft in 1973-75. Since January 1990, most of Hilton ore production has been treated in the Hilton Concentrator, and concentrates trucked in slurry tankers to Isa for smelting or shipping.

Jan 1, 1993

By Orrock G, McKee DJ

Mathematical models of autogenous and semi-autogenous grinding mills have now reached a stage of development where they can be usefully applied to practical problems. In particular, the models are suitable for inclusion in simulations of grinding circuits to study the effects of cir- cuit changes, variations in ore type and changes in throughput. The paper describes a simulation study of the Elura grinding circuit where the empha- sis was on investigating methods of reducing product size from an autogenous mill-ball mill grinding circuit.

Jan 1, 1988

By T C. Hughes, R Hughes

Ausmelt has developed and commercialised high temperature reactor technology that has been applied to waste processing in the form of a catalytic waste converter (CWC). Ausmelt Technology uses a top submerged lance system within a versatile converter containing an oxidised molten siliceous slag. Metals and other valuable products can be extracted from wastes for recycle into the community. Non-valuable components such as toxic organochlorinated compounds are destroyed and prevented from reforming. The slag produced is inert and can be safely used in building and concreting. The CWC can be applied to practically all types of wastes and examples from Ni-Cd batteries to toxic wastes are discussed. Additional benefits can be derived from large-scale operations if the surplus heat generated is exploited to produce steam and electricity.

Jan 1, 2000

By Zieg GA

The Sheep Creek Project lies 30 km north of White Sulphur Springs in the Little Belt Mountains of central Montana. Homestake Mining Co. discovered base metal anomalous pyrite beds downdip from gossans in 1974. Cominco American began exploration in 1976, consolidated adjacent properties, and joint ventured with BHP-Utah International in 1985. High . grade Cu and Cu/Co mineralization intersected in a 1985 drill hole led to discovery of two separate deposits. The project area now covers over 175 km2 and is being actively explored for Cu, Co and Zn in a shale hosted bedded sulphide system.Proterozoic Belt Supergroup sediments host the Sullivan Pb/Zn deposit, stratabound Ag/Cu ores of the Revett Formation at Troy and Rock Creek, and base metal rich pyrite beds at Sheep Creek.

Jan 1, 1990

By K H. Esbensen

During the next five years Denmark will implement a significant reduction in the national CO2 emissions to fulfil the Kyoto Protocol. The energy sector is central for achieving this goal and extensive use of renewable energy is the most important single factor contributing to reduce emissions of greenhouse gases. DenmarkÆs renewable energy sources comprise wind energy and biomass. Wood chips and straw are the dominant type of biomass in Denmark. More than 500 000 tons of wood chips are used annually, currently with rapidly growth prospects. This contribution focuses on sampling of wood chips.

Jan 1, 2005

During the 22 years that Isa Mine has been formally involved in accident prevention, it has succeeded in reducing its lost time injury frequency rate by 70 per cent. At present its performance compares very favourably with that of other heavy industries and in particular that of other underground metalliferous mines. When reductions such as this are recorded, people want to know how it is achieved. No doubt it is assumed that if an organisation can maintain a consistent performance in accident reduction, it must have developed a panacea for the prevention of industrial injuries. This assumption would not be in accordance with the facts in the case of Isa Mine which has achieved its record through plain hard work and plenty of it.

Jan 1, 1975