Search Documents

By Joseph Harrington

It is sufficiently correct to say that domestic solid fuel is universally hand fired and it is almost as correct to state that a very large proportion of hand-fired domestic fires are extremely inefficient and smoky. This is particularly true with raw bituminous coal for the fuel. The smokeless and efficient firing of domestic coal affords one of the most difficult problems confronting the combustion engineer. This is due to the universally constricted combustion space in the domestic furnace, the complete ignorance regarding the laws of combustion on the part of the average person, and the fact that the laws of efficient combustion are almost completely nullified under these conditions. It is well to familiarize ones self with these laws. These are: 1. The gradual introduction of the fuel to the furnace. 2. The admission and mixing of the right quantity of air with the coal gases. 3. A temperature high enough to permit complete combustion, and 4. A furnace space of volume sufficient to permit of the combustion gases and the oxygen getting together within the confines of the furnace. Even a casual inspection of the domestic heater will show that none of these essential things are present in proper degree, and this is the reason why the problem of domestic firing presents such difficulties. I have analyzed these conditions in a paper published by the Black Diamond, and which has already had wide distribution, so that I will not repeat the rather lengthy discussion in this paper. A survey of the entire field indicates very clearly that a reversal of existing methods and equipment must be had before any real improvement can be expected. It is my firm belief that in this instance above all others it is necessary to build the efficiency and smokelessness into the equipment in such a manner that its performance will be entirely independent of both skill and interest on the part of the operative. To attempt to educate every man, woman and child who periodically throws coal into a domestic furnace would be literally impossible. Much can be done, however, if we could teach the householder the simple essentials of alternate firing, which I have explained at length in the above mentioned paper. This would go a long way toward making the domestic furnace problem more satisfactory, as well as efficient and smokeless. Many will argue, and with good reason, that the domestic fuel should be prepared coke and with this I agree up to the limit imposed by the practical considerations of quantity production, price and the possibility of marketing the by-products. It will be obvious that if enough raw coal should be processed to provide all of the required domestic fuel that the amount of by-products recovered during the coking process would be so great that there would be little or no market at any price which would justify the manufacture of coke. If the by-products were wasted they would not only be a tremendous economic loss, but the price charged for the coke would probably be so high that the market would be limited, and this would defeat the very idea of the whole thing. Much can be done, however, in advancing the use of coke, but I believe that much more extensive and careful experimentization should be had in order to determine the right size and quality of coke for the various domestic furnaces. If coke were to be developed for extensive domestic consumption it is more than probable that the coking process should and could be stopped at a point where the volatile content of the coke would be sufficiently high to permit of prompt ignition and combustion in low draft installations. If the volatile content were from five to ten per cent a very different kind of coke would be produced from that which is now produced with perhaps one per cent of volatile. A skillful manipulation of this feature would make coke adaptable and satis-

Jan 1, 1925

Saturday, June 28 A pre-convention activity kicking off the 93rd RMCMI meeting was a Saturday evening June 28 reception for all Mine Rescue participants, their convention registered spouses, professional evaluators and RMCMI Board of Directors. This was at Buddy's Run in the Sheraton Steamboat Resort, Colorado. An estimated 100 persons enjoyed the buffet: fresh vegetable erudite with ranch dressing, fresh fruit and cheese displays and silver dollar rolls filled with ham or turkey. Blue golf shirts and red caps and convention packets were distributed to each Mine Rescue team member. Evaluators received red shirts and blue caps during the reception. Meeters and greeters from the Reception Committee wore red RMCMI arm bands and were stationed at strategic hotel spots, answered attendee's questions and gave directions to the registration area. Convention packets were first distributed Saturday afternoon by Julie Cummings and Lorraine McDonald. Sunday, June 29 A 7:30 a.m. shotgun scramble kicked off the golf tourney at the Sheraton course for 145 golfers. Yes, 145! as Lois Egan, President Tom's wife, completed a five-some with Tom and their three sons. A continental breakfast preceded the tourney. Another 65 golfers began play at 1:00 p.m. making this a record number of 210 golfers! Julie Cummings and Loren Linville sold $2,620 worth of $10 mulligans to the golfers with proceeds to the scholarship program. [ ] Both golf tourneys were co-chaired by Dave Mallak and Gordon Merriam who distributed prizes at 4:30 p.m. Monday. Prizes were donated by Amax Coal Sales West, Inc.; Austin Powder Co.; BHP Minerals-Navajo Mine; Bucyrus International, Inc.; Commercial Testing & Engineering Co.; Empire Machinery Co.; Ingersoll Rand; The Jeannot Group, Komatsu Mining Systems; Long-Airdox Co.; Marston Environmental Inc.; MEGA Corp.; The P&M Coal Mining Co.; Scandura, Inc. and TerraMatrix. [ ] RMCMI registration was an all day venture headed by chair Julie Cummings and assisted by Pat Johnson. [ ] Nearly 40 persons met for a Chef Demonstration and wine tasting at the Sheraton at 11:00 a.m. Executive Chef Jacques Wilson prepared broiled achiote shrimp with cantaloupe, grilled duck stuffed blue corn pancakes with herb grained bread and fresh fruit meringues. Wilson shared his recipes with the group and appropriate wines were served with each course, all sampled by the attendees. The chef arranged an impromptu showing of the main kitchen following the demo. [ ]

Jan 1, 1997

[W. R. Abbott, 11o8 First National Bank Bldg., Denver, Colo. L. E. Adams, 817 Newhouse Bldg., Salt Lake City, Utah. Herbert Addison, Big Horn Colliers Co., Denver, Colo. Richard V. Ageton, Brighton Mich. John Alexander, Dacona, Colo. C. A. Allen, 448 Capitol Bldg., Salt Lake City, Utah. David Allen, Lafayette, Colo. John Allen, Ludlow, Colo. Thomas Allen, Mt. Harris, Colo. Gerald Alley, C. F. & I. Co., Pueblo, Colo. Archie Allison, Box 562, Walsenburg, Colo. D. S. Allison, 56 W. 6th South Street, Salt Lake City, Utah. Park Allison, Box 94.0, Rock Springs, Wyo. Howard R. Allonier, care Lunkenheimer Co., Cincinnatti, Ohio. J. B. Ambler, care Ambler & Riter, Engineers, Salt Lake City, Utah. A. F. Anderson, 403 Ideal Bldg., Denver, Colo. W. K. Anderson, 4.23 East Yampa Street, Colorado Springs, Colo. Sam Andrews, 503 Pike Avenue, Canon City, Colo. Jos. Angster, Farr, Colo. William Angus, Somerset, Colo. Joseph Appleton, Ironton Engine Co., Ironton, Ohio. Victor Arnoldi, Ideal, Colo. John Arnott, Crested Butte, Colo. R. M. Atmore, Swastika, N. M. W. H. Backman, 1601 Alcott Street, Denver, Colo. Edward E. Barrett, Roberts & Schaefer Co., Chicago, Ill. G. F. Bartlett, 311 Ernest & Cranmer Bldg., Denver,, Colo. C. S. Beach, Kemmerer, Wyo. Thos. Bertram, Box 134?, Oak Creek, Colo. Charles Beuchat, Pryor, Colo. John Bevan, 1625 North Corona Street, Colorado Springs, Colo. James L. Bisch, Van Houton, N. M. Jos. Bodner, Oak Creek, Colo. A. H. C. Boissier, 302 E. & C. Bldg., Denver, Colo. John M. Bopp, 1615 Walker Bank Bldg., Salt Lake City, Utah. Edward Bottomley, Carneyville, Wyo. James V. Bowen, Union Coal and Coke Co., Denver, Colo. Alex R. Bowie, Bowie, Colo. John S. Bowie, Bowie, Colo. Wallace D. Bowie, Bowie, Colo. W. J. Bowns, Castle Gate, Utah. L. Brandenburger, 59 West Broadway, Salt Lake City, Utah. James Brennan, Primero, Colo. W. D. Brennan, Dawson, N. M. Burt B. Brewster, 704 Kearns Bldg., Salt Lake City, Utah. A. L. Brockman, Sugarite, N. M. Alex. J. Brooks, Supt. Hastings No. 5 Mine, Hastings, Colo. Edward Brooks, Sweetwater, Wyo. E. S. Brooks, Rock Springs, Wyo. D. W. Brown, Rocky Mountain Fuel Co., Denver, Colo. L. E. Brown, 1212 Walker Bldg., Salt Lake City, Utah. Mark Y. Brown, 629 East Main Street, Trinidad, Colo. H. H. Bubb, Carbon Coal and Coke Co., Cokedale, Colo. W. H. Bullock, 1052 Gas and Electric Bldg., Denver, Colo. Thomas B. Burnite, 523 Boston bldg., Denver, Colo.]

Jan 1, 1921

By D. A. Stout

Mr. Chairman and Members of the Rocky Mountain Coal Mining Institute: Your Secretary has asked me to write upon a subject' which is a most interesting one, and which has a very wide scope. In view of the great need for further decreasing costs at its coal mines, the Colorado Fuel and Iron Company began early in 1924 to experiment with methods of mining which had not previously been. tried out at its mines, and which were selected because of the greater possibilities for the concentration of the work, better grouping of workmen, and increased tonnage per workman, with a resultant increased efficiency, better supervision, and lowered costs. Because of the great competition of the day, means and methods must be provided by which fewer mines can be made to produce larger tonnages and at a lower cost. Western physical conditions are such as to make our problems far more complicated and not so easy of solution as compared to many of the eastern fields where conditions are more favorable for the operation of the mines. The dry condition of our Western mines on account of a relatively low humidity, and with additional gaseous conditions, makes the problem still more difficult to solve. A study of new methods was necessary before adoption, and this was particularly true of the method of extracting the coal. Where mechanical means are used, particularly in the coking coal mines of this state, due consideration must be given to the type, and machines or conveyors should not be installed solely on the basis of their performance elsewhere, without the knowledge of local influencing factors. In trying out the newer methods of extraction at our mines, very careful consideration has been given to the question of safety and the adoption of any new methods must provide adequate means of protection to employes, and be approved by' the State Coal Mine Inspector. In any large industry there are a few outstanding operating costs, and usually the leading ones in their order are labor cost, material cost, and power cost. The things which we, hope to accomplish: 1. Reduce labor costs. 2. Reduce material costs. 3. Reduce power costs by the con 4. Reduce the amount of powder used per ton of coal produced. 5. Increase the lump percentage (particularly at the domestic mines). 6. Reduce accidents and annual compensation payment. 7. Reduce haulage costs. 8. Reduce cost for track work. 9. Reduce cost for timber and timbering, and increase the recovery of timber at a considerable additional saving. 10. Reduce the brushing costs. 11. Reduce the amount of rock hauled to the outside. 12. Reduce the cost for drainage. 13. Reduce the cost for ventilating. 14. Reduce cost of inspection and supervision. 15. Reduce the cost for shot firing. 16. Reduction of number of working places. 17. Grouping of men with increased sociability. 18. Increased tonnage per man. 19. Reduction in total number men employed. In the consideration of the methods used and now working successfully, there were three points which were considered outstanding, to make them wholly successful: ventilation, roof control, and transportation. For making the experiments, those mines were selected where conditions

Jan 1, 1925

By D. Harrington

My acquaintance with rock, dusting as a preventive of wide spread explosions in coal mines dates from the fall of 1914 and the spring, summer and fall of 19.1.5 when I had an opportunity to observe the staging (both before and after) of several of the explosions in the Experimental Mine at Pittsburgh and saw violent explosions stopped by rock dust, also saw violently explosive coal dust made insensitive by use of rock dust to ignition or to propagation or spreading of an explosion. From this work I became a convert to rock dusting though I had previously been a firm believer in watering methods and am yet a firm believer that watering, methods have a well defined place in promoting the health and safety of our coal miners. In 1916, while in the Bureau of Mines service, I made an underground study and a report to the Bureau on the first extensively rock dusted mine, in the United States, the Delagua Mine of the Victor American Fuel Company near Trinidad, Colorado, there being then some ten miles of entry in that mine which had been kept well rock-dusted for at' least four years The dust used was " adobe" or surface soil screened from sweepings of the dry surface wagon roads through a screen with one-eighth inch openings, the dust giving about 20% through 200 mesh and about, 10% of approximately 1/8-inch size. The material was collected during dry weather by contract at $1.00 per ton (sacked) and was accumulated in summer and stored for winter and spring use. The dust was scattered through haulage entries by hand or by an electrically operated blower and was held on shelves along the ribs or between and on timber caps with from 1/4-inch to 2-inch thickness of the rock dust. The cost of maintaining the 10 miles of entry well dusted was about $1,500.00 per year or $150.00 per mile per year. Total cost of 'the rock dusting over a four-year period was about $6,000.00, about 2,500 tons of dust being used and 2,000,000 tons of coal produced; the above cost included about 1,200 days labor dusting at $2.50 per day, 2,500 tons of rock dust at $1.00. per ton and miscellaneous labor, material, repairs, power cost, etc., amounting to about $500.00. The cost per ton of coal produced for keeping 10 miles of entry rock dusted being about 3/10c. In addition to the rock dusting, some sprinkling was done, chiefly in the interior of the mine, costing about 2/5c per ton; and due to spilling of coal and sifting of coal .dust through loose cars on the entry floors, the floors of haulage roads were kept sprinkled between and just outside-the rails. Total cost of sprinkling and rock dusting was about .7/10c per ton much less of course than the same work would now cost. Between January, 1916, and July, 1924, my duties in the Bureau of Mines allowed me, to follow up and make underground inspections and reports on more than 20 coal mine explosions and fires in a number of states of the union and in this work a large number of samples of road, rib, and other dusts were taken to ascertain the effect of moisture, roof and floor dirt, etc., upon the propagation or the stopping of the explosion; also a large part of my work was to obtain evidence pro and con as to influences affecting the disasters and very prominent among those influences were the occurrence or use of water, water drippers, or ponds, as well as of sand, roof or floor rock or dust on floor, ribs, etc. The Dolomite explosion near Birmingham, Alabama, in November, 1922, and the Dawson No. 1 Mine Explosion at Dawson, New Mexico, in February, 1923 (at both of which I made underground inspection and report) both starting on main intake haulage road and both in mines which had fairly elaborate watering systems, convinced me that at least as far as freezing can occur on main intake air courses which also act 2s main .haulage ways, rock dusting is likely to be much more dependable than sprinkling. In making up the report on the Dawson Explosion to the Bureau of Mines (copy of which also

Jan 1, 1925

By Wm. Moorhead

Safety Measures Employed at the Dawson Mines Preventive measures for eliminating and localizing explosions is a subject of special interest to Coal Mining operators at the present time. I shall endeavor in this paper to present the practical methods which have been developed at the mines of the Stag Canon Branch of the Phelps-Dodge Corporation, Dawson, New Mexico. Adobe Dusting Adobe is used for practically all dusting on the main haulage roads. It is obtainable in sufficient quantities adjacent to the mines. Loaded into railroad cars by a clam-shell loading crane, and transferred to the mine pit cars at the nearest available point, it is readily distributed along the motor roads by means of the mine locomotives. Of first consideration for adobe dusting is the preparation of the roadway. It is essential that all loose coal and dust be removed, at least to a depth of three or four inches below the top of the rails. The adobe, in a more or less moist condition is unloaded by hand from the pit cars and stored along the previously prepared roadway, to be later scattered to a depth of several inches over the floor, and over the ribs and roof such as is possible by the use of a shovel. The adobe soon loses its moisture and becomes pulverized. Due to the disturbance caused by passing motor trips, men and animals, the dust is effectively scattered along the ribs and roof of the roads. The velocity of the intake air aids materially in sustaining the suspension of this inert matter. Another scheme for distributing the fine dust in use is to chain the top of a pine tree to the rear of the trips, both empty and loaded. Dragging it along the motor roads stirs up the dust and aided by the intake air it is carried for long distances into the workings. The adobe is continually loosened and raked, all rock, coal, etc., being collected in piles and later loaded out in pit cars. One man is employed for each six thousand feet of entry. Dusting Main Return Air-Courses The air-courses are first thoroughly cleaned. All the loose coal and rock is loaded out, the ribs and roof washed down several times. Every five or six hundred feet, the stoppings between the main and return entries are broken through and small doors installed. Blowers are used to force the fine dust into the return air-courses through these openings. Thus suspended the dust travels a considerable distance before it is deposited on the floor, ribs and roof. The material used is chiefly adobe, sun dried, and screened on the outside. A two ton car load of this dust will cover several hundred feet of airway as very little loss occurs, often depositing from 2 to 6 pounds per running foot of entry. Methods of Insertion Blowers are used to force the dust into the main returns. One unit consists of a small Buffalo blower mounted on a truck with a two H. P. motor. A six-inch pipe is attached to the blower and runs the full length of the truck with a projection over the end. A hopper is built over the pipe and connected. Stove pipe or canvas tubing is led from the pipe through door in stopping. When the blower is started dust is fed into the

Jan 1, 1924

(Referring to map) If there are any methods to improve on this I would like to have some suggestions on it. The maps there are on a scale of one inch to two hundred feet. At the time of each extension a letter is used and a line drawn across the entry and the room. The date of the extension is given up in the margin of the map. Here is an extension made April 6th. Extension L is shown in each one of the rooms, November 29th. N-you see the two rooms have been finished down into here. 0-the last extension, has just been stopped, and the three working rooms. Now, one of the features of this plan, when the rooms have been stopped, the line is drawn straight across. When the room or entry is still going, there is a small projection beyond the line, indicating that the next cut is changed. When the distance cannot be ascertained by the engineer, he gets the distance from the mine boss or some other source which is reliable, and that is put on in a dotted line. That gives you a complete story. Anyone looking over the map can see immediately every place that was working at the time of this extension, every place that is inaccessible, and get a complete picture. The extension of the coal is put on the extension at each extension. The survey stations are put in, showing each survey point. The pillars when they are pulled-only the pillars that are pulled are cross-hatched. The whole map is in cross-hatch without any regard as to what pillars are pulled. If a little stump is left in, that is shown on the map. The engineer only shows what pillars are pulled that he has actual knowledge of, or has been given to him in detail by the mine foreman. I believe that concludes the work on the mine map, and there is certainly room for a lot of improvement on most of the mine maps which we have been getting into the office. PRESIDENT PRYDE: Does anyone want to ask any questions? Any questions about the leasing regulations? I want to say there are several leases in the Rock Springs field, and when Mr. Smith comes on one of his visits the Rock Springs Institute have asked him to address them on the leasing proposition.

Jan 1, 1924

Briefly, the machine consists of a steel frame mounted on roller bearing wheels and axles, an electric motor, a fully enclosed speed reduction gear unit, a specially designed centrifugal pump driven through a friction clutch and silent chain, a mixture tank and agitators, and all necessary operating and control mechanism. The wheels are mounted on solid roller bearings made of special roller bearing steel, and are cast with deep chilled threads. The axles are of high carbon axle steel. A General Electric Company motor, of special design to exclude dirt and moisture, is used. It has an unusual overload capacity and a maximum torque at starting speed. Special arrangement can be also made for storage battery operation. The motor drives from one end, through a flexible coupling, to the speed reduction unit, and from the opposite end, through a similar coupling, to the pump clutch. The design of the flexible couplings is such that the drive is reversible. The speed reduction gears are enclosed in an oil and dust proof housing. All spur gears, as well as the main drive clutch, are made of steel forgings, with accurately cut teeth. An aluminum bronze worm wheel and special heat treated alloy steel worm provide the speed reduction for the traction drive. The worm shaft is mounted on Hyatt roller bearings and the thrust is taken in each direction by ball thrust bearings. The main drive shafts are of special alloy steel and operate in Hyatt roller bearings. The slow speed shafts run in extra large bronze bushings. Ample and constant lubrication is provided by splash from the gears running in oil. The Mudite pump is of special de- sign. A renewable wearing plate protects the pump casing from the natural wear of the mixture. The open runner is mounted on an extra large shaft which runs in a Hyatt roller bearing on the pump end and in Timken roller bearings on the outboard end. A special cage prevents water and grit from reaching the pump bearing. All thrust from the runner is taken on the Tim- ken bearings and these bearings also provide for the accurate and easy adjustment of the runner. The pump is driven by a silent chain, which operates on cut steel sprockets, from a friction clutch. The clutch is designed to secure long wearing qualities with minimum attention and its adjustment is easily effected. It is mounted on Hyatt roller bearings and the clutch drive shaft also runs in the same type of bearings. The pump discharges through a nozzle, which is adjustable, and controlled by the operator. The mixture tank is of approximately 650 gallons capacity. It is provided with a mixing well constructed of perforated plate screen to prevent large hard particles from getting into the valve or pump. The tank is filled through an opening in the top directly into the mixing well. On a shaft running longitudinally through the tank are arms so arranged that the mixture is thoroughly mixed and kept in continuous circulation from end to end. This shaft is driven from the speed reduction unit by a steel roller chain operating on cut sprockets. The traction drive is taken from the worm wheel shaft through steel roller chains of extra large size that run on cut steel split sprockets on both axles. An idler sprocket provides for easy chain adjustment. The axles are mounted in solid roller bearings in fully-enclosed dust proof housings, which support the frame through coil springs. These springs eliminate twisting strains on the frame on account of track irregularities and also relieve the working mechanism from road shocks. The speed reduction from the motor to the wheels is such that it gives an operating speed of approximately ninety to one hundred thirty feet per minute. The brakes are of the conventional shoe type and engage the wheels on both axles. They are operated by a hand wheel conveniently located and

Jan 1, 1925

By R. S. Morton

MR. CHAIRMAN AND GENTLEMEN: To be invited to address the members of The Rocky Mountain Coal Mining Institute on a particular subject is an honor I sincerely appreciate. The subject of this paper is, ?The Advantages of Having Such Men as the Fireboss Under State, Rather Than Corporation Jurisdiction." On the fireboss, primarily, depends the safety of the mine. When all the rest of the mine workers are still comfortably sleeping in the wee small hours of the morning the fireboss steals noiselessly away, from his bed to take up his daily task, a tour of inspection. He enters the mine, he inspects alone they workings that will be filled with men whose safety is in his keeping. Loyal to his fellow men and responsibilities of his position; he seeks for danger in every place, on every road and travelingway; going over caves, through dangerous places where none of the others are expected or allowed to go alone. How many of us give a thought to these dangers and the faithful work that this guardian performs for our safety. After the fireboss has made this round of inspection, he reports all the dangerous places to the foreman and enters them in the book; he is supposed to have performed his duties; he has no authority to enforce his recommendations. He has found a number of rooms that have not been timebered as they should be for the safety of the digger; he has told the diggers to they timber, up better for their own safety; he has kicked to the foreman about these same places. These conditions. continue until there is an accident. The fireboss reports, broken crossbars or bad roof on a roadway or some other danger to the foreman, but the foreman does not have it fixed, making, excuses, as he cannot put any one on that work today; or that it will stand until some idle day, and that is the way things go until the fireboss gets so he wonders what good he really is, is it any wonder it is hard to get good men to take this position of fireboss? The remainder of the shift the fireboss is used as a general roust-about, having to do such, work as building stoppings, help the timberman or track layers, pull rails out of danger in pillars, a trapper is off and he is told to trap that day, when the mine is idle he is laid off to cut expenses. That is the way the fireboss is treated. The fireboss is not merely a merely a necessity to be lightly regarded but a factor whose authority should be unquestioned. The fireboss has made his district and knows just what conditions the workings are in, and sees lots of dangers that the foreman does not. In the morn-

Jan 1, 1921

H. C. GLAZE: There is no question in my mind that the day of direct current distribution is practically ended so far as large coal properties are concerned. Another thing that Mr. Drennan touched on that is of the utmost importance, is that of voltage-voltage to the various pieces of equipment inside the mine. You all know how expensive it is to have motors in operation in important places where the voltage .is about half that which the motor should have. This is particularly true in the direct current system. It slows down production, causes burnouts and destruction to apparatus, and is a question that you men have got to go into. It costs a great deal of money, as Mr. Drennan pointed out, to take care of this. The wires are large and cumbersome, while; on the other hand, with an alternating current system you can use a minimum amount of wire. We have installed this class of equipment with so-called "pick-proof" cable of 2,200 volts down slopes, and I have never heard of any trouble whatsoever from this cause.

Jan 1, 1923

By John M. Jennings

The Hiawatha pitmouth is located at the head of the middle fork of Miller creek, at an altitude of approximately 8,100 feet. The coal is lowered to the tipple down a gravity tram two miles long, in 16 car trips which carry about 60 tons net. The average running time of the trip is about nine minutes. At the bottom of the tram there are two tracks for the loads and two for the empties. The trip, after being cut off the rope, is dropped by gravity onto a feeder, where the cars are uncoupled and fed one at a. time across the pitcar scales and into the dump. The dump is of the full revolution type, friction driven. On passing out of the dump the cars are returned by a kickback onto the empty car haul. They are caught at the bottom by a brake which consists of a pair of steel squeeze blocks operated by heavy springs. The empties are elevated to the double tracks, where the trips are made up. The feeder, scales, dump and empty car haul are all built on the solid ground of the hillside instead of being incorporated in one structure with the screening plant. The coal is dumped into a small hopper with a capacity of about 15 tons, whence it is fed by a reciprocating feeder onto a scraper conveyor which takes the coal over to the screening plant, a distance of 120 feet. This conveyor is 48 inches wide and travels at 120 feet per minute. The screen itself is interesting. It is of the Marcus Horizontal type.

Jan 1, 1925

MR. SHUBART: Mr. Miller's paper mentioned the two processes that seemed to be a success, the Smith process and the Piron process. I suppose the main difference is this, that Smith's process is to furnish domestic fuel and the by-products while the Piron process that Ford is installing is for fuel for power plants. I would like to ask Mr. Miller something about the commercial cost of the process. With the briquette you must make it cheap enough to sell. What are the commercial possibilities of Smith's briquette? MR. MILLER: It is pretty hard to say what the cost would be at this time, owing to the fact that slack has advanced double, or even more at the time I was in New York with the plant, but at that time it was costing $1.10 for the operation. You can add to that, of course, the cost of the coke. One dollar and ten cents was the entire cost of plant operation. It takes about one and one-half tons of coal to make a ton of briquettes. One dollar and ten cents takes care of all the material, cost, labor, handling, etc. Labor was much cheaper then. I would say it would cost about $2.20 now. The cost of coal is what you can buy it for on the market. I don't think, however, that the carbocoal process will ever meet with any great favor for the simple reason that it is really a prepared fancy fuel. It is going to be nice for people in offices where they want a grate or for families where they want a nice clean fuel. It leaves no stain on the fingers, no odor to it. It seems in carbonizing coal we change the carbon molecule. For instance, we are all familiar with the diamond. It is carbon, yet it requires a tremendous heat to burn a common little diamond. But you can set a piece of charcoal afire, which is also carbon, with a match. The molecular form has been changed in carbonizing coal, i. e., it is larger. Carbocoal will fire very readily, it can be started with a piece' of paper. I think the Piron process will be the process, i. e., to simply take out the tars and light oils, then fire direct-have the distillate plants right on the job. CHAIR: Can Mr. Shubart tell us something of the mechanical part of the Piron process? MR. SHUBART: The Piron process is of interest because Mr. Ford is taking it up. He has made so few mechanical mistakes it makes us feel that it is a success. Piron is a chemist of high accomplishment and reputation. The thing about the proces is its simplicity. Mr. Smith's is a very elaborate process, but Piron has gotten around all that. Piron feeds the raw coal in at about one-half inch mesh or smaller. He feeds it into a retort about 55 feet long, 16 feet wide over all. He has a hearth about 6 feet wide and the length of the retort. The base of the hearth that carries the coal is a conveyor, a flat cast iron conveyor, a very massive affair, very accurately made, so that there is no loss of coal. Between the upper and lower strands of the ' conveyor is a bath of molten lead which gives an accurate control of temperature. For best results he must have temperature of not under 800 F., not over 1,300 degrees F., about 1,100 or 1,200 F. seems to be ideal for getting greatest yield of oils and the best tars and other by-products. This lead bath has a system of flues running through it that

Jan 1, 1923

T. T. READ, BUREAU OF MINES: Mr. McAuliffe has asked a very practical question. Expressed in another way, the question is: If we have decided to use rock dust to prevent coal dust from exploding, have we got to take rock, that is, solid material,, break it up and finally grind it into dust (and fine grinding is very expensive), or can we take material that is already in a pretty fine state of subdivision and thereby save the expense of pulverizing it? Most of the preceding discussion has been from the view-point of practical experience, and I should like to suggest that we have not had enough practical experience in rock dusting to be able to answer this question, from the viewpoint of experience, with the degree of definiteness that Mr. McAuliffe desires. With your permission I will discuss the matter briefly from the theoretical standpoint, because after all the theoretical considerations, insofar as we understand them correctly, will apply to every' case, whereas in coming to a decision on this matter it will be necessary to take into consideration local conditions, which will necessarily vary in every case. Considering the matter in a rather elementary way, the first point is: What makes coal dust explode? The air of this room is full of dust at the present moment, even though we do not notice it. If you were to close up the room for a week, enough dust would settle on the floor so you could write your name on it. Of course, the dust which is in the air of this room is not coal dust but even if it were coal dust and you were to bring an open light in' here we all know that the dust would not explode. The reason for that is that the dust particles are not close enough together for the flame to propagate itself from one to the next. You will probably be able to see in the demonstration in the gallery on Saturday that the coal dust explosion is practically a very rapid burning of the dust. When you light one piece of dust it burns and gives out heat and if there is another piece of dust close enough to it so that the heat from the first piece is able to bring a second piece up to the burning temperature, then the flame will propagate itself through the mixture. But, if the particles are so far apart in the air that the' heat from one particle is dissipated before it reaches an adjoining one, and is therefore not able to bring the second particle up to the burning temperature, then the flame will not propagate. To get a coal dust explosion, it is not sufficient to have coal dust suspended in the air. The coal dust particles must be close enough together in the air so that the heat from one burning particle is able to heat the adjoining particles up to the point at which they will burn. There has been some discussion of the size of dust particles that will cause an explosion to propagate, and it has been pointed out that the minus 200-mesh dust is the most dangerous, and that particles coarser than 20-mesh will not propagate an explosion. There are two reasons for that. A large particle has very much smaller surface in proportion to its weight than a small particle has. You know the old story about the Indian who when asked how he could go around in cold weather without any clothes on said that an Indian was all face. A 200-mesh particle is almost all surface and there= fore is able to burn almost instantaneously, which means that it gives out its heat almost instantaneously, whereas a large particle with less surface in proportion to its weight burns more slowly, gives out its heat more slowly, and the heat has more time to be dissipated. The second reason why coarse dust does not easily propagate a flame is because it is so hard to make it

Jan 1, 1924

By E. R. Gibson

It is quite generally conceded that the coal mining industry is among the most progressive in the adoption of modern and efficient equipment and mining methods, but most woefully antiquated in many respects in the matter of systematic accounting. The cause of this condition is problematical, but is usually thought to be due to false economy. We realize that those who do not understand accounts, or like accounting, are inclined to be disdainful of accounts and statistics, and to under-estimate the benefits derived from the expense and labor involved in proper accounting. The business that is run without a proper accounting system is subject to haphazard financing and courts disaster. Furthermore, the operator who disposes of his product without due regard to the requirements of the industry as a whole, as reflected in the cost of doing business, is an unfair competitor. No one will deny that the possible production of coal in the United States is much in excess of the demand. While it is true there is an occasional shortage in certain localities, it is due to temporary abnormal conditions which are overcome in a short period of time, when the mines are again obliged to take idle time, and herein lies the danger, not alone to the operator who neglects to keep informed as to operating costs; but to his competitor as well. While physical conditions and operating methods differ materially, accounting methods must likewise differ in some respects, but irrespective of how the result may be obtained, a true statement of cost is absolutely essential. Daily cost statements may be preferred by some, but have proven unsatisfactory, generally speaking, because of variation in production as well as in both labor and material expense from day to day; therefore, we will confine our attention to a monthly cost statement. To be most effective, operating cost statements should be prepared and submitted to the officers as soon after the close of the month's busi¬ness as possible, to enable them to remedy any defects in the operations that might be discovered by an analysis thereof. Opinions differ materially with respect to the most efficient method of compiling and the distribution of labor and material. The writer believes that a time book which provides space in which to enter the number of hours worked each day of the month by each employe, together with distribution thereof, is the most accurate, simple and complete. This record will show the service performed by an employe each day of the month and the account to which same is properly chargeable. This, of course, refers only to the employe working by the-day or month. While there can be but little said concerning the compiling and distribution of miners' wages, as the weighman's bulletin used almost

Jan 1, 1921

By Thomas Collier

MR. PRESIDENT AND CO-WORKERS IN THE COAL INDUSTRY: I was requested by our president to prepare a paper on Longwall Coal Mining, to be read before this honorable organization. There are three general systems of Longwall, Longwall advancing and Longwall retreating, and the Nottingham system which is worked in England and South Wales. In Fremont county, where I am employed, the Colorado Fuel and Iron Company are working their mines on the advancing system. The face is started generally from the bottom of the shaft or other mine opening, or, at the outside of the pillar left to support the shaft or slope-bottom and advances toward the boundary of coal area. As the roads in this system are maintained by pack walls, it is sometimes called gob-roads system, and by these means the mine is opened up rapidly and consequently early returns are secured from the capital invested. By this method, there is no expense for narrow work, and a minimum amount of timbering of the roads is required. Now what I call ideal Longwall work is where there is about eight inches of dirt mining-and four and one-half feet of coal, .and when the entries and rooms will gob themselves, so that there will be no rock or dirt to haul out to the surface. But this is not the case in the mine I am in charge of. The entries and rooms will not gob themselves, therefor we have to haul the rock and dirt to the surface, which runs up the cost of production. Now the ideal roof in Longwall is composed of tough elastic and pliable strata that yield gradually by bending when the coal is removed, and throwing a sufficient weight or roof pressure on the coal face to break the coal when the same has been mined or undercut. Timbering should be done systematically, the coal well spragged before the miner starts to undermine the coal. Cogs or cribs are alright in their place, but I am not a believer in crib in Longwall working because they are too strong for the roof and do not leave the roof to squeeze .down gradually and break the roof around the crib. Longwall work requires particular skill on the part of the miner, and a familiarity with the conditions affecting room and pillar work, and a good room and pillar mail may not be successful in. Longwall work. A good Longwall miner realizes more than any one else the importance of being regularly at his place every working day. A day lost causes his place to fall behind the others which makes his work harder, and his daily output is further reduced by the amount of small coal that is liable to result from the excessive pressure where the face falls behind. The bad results are also felt by the miner working on each side of such place, as the roof pressure is often insufficient and the coal does not break as well as when the face is kept in a uniform line.

Jan 1, 1921

By R. Dawson Hall

R. DAWSON HALL (The Coal Age, New York City) : Mr. Chairman and gentlemen: I do not feel that I have anything in particular to say. I have not prepared anything for an occasion such as this. I just came from New York City, and as one man said to me today, "That is not any recommendation in particular." (Laughter.) In answer to your request for a few remarks of a timely character I would say: One of the possibilities in the Rocky Mountain Region coal mines is the use of steel arches, posts and straps. The timber of the region seems unusually subject to dry rot and does not last long, especially in those places as in southern Wyoming, where the mine atmosphere is likely to contain a large quantity of carbon dioxide. It is true that, in many mines, much care is taken to drive out this gas and to arrange that the timber will have the fresh air that will prolong its life, but despite such provision much timber is subjected to speedy rot. Steel has made rapid progress in England, Germany and France and is recognized as an economy, not an extravagance. Frequent replacement of rotting wood and removal of broken rock are a source of great waste, risk and inconvenience in operation that together spell great cost. The very dryness of the mines and the lack' of acid water are favorable to the use of steel where support of roof or sides is necessary.

Jan 1, 1932

By Parley Potter

GENTLEMEN OF THE COAL MINTING INSTITUTE: I was requested to write an article on mining a short time ago; however, the time has been so short that I have not had time to prepare an article as I would like to have presented it to this body. In writing this article it has not been my intention in making comparison of various mines, to favor one or discredit the other. I hope it will be considered in that light. The coal mining industry as I have seen it in the past, at present and in the future. In years gone by large tracts of coal land could be obtained at a very small cost, and as yet coal land may be purchased at a reasonable price in this country, but I believe the time is near at hand when the methods of mining will have to be changed greatly in this country. Many changes have taken place-in the last few years, some of them have been forced by law, others by the coal operators themselves, after being convinced that the changes made were for their own benefit. During my 20 years in the mines I have seen thousands and thousands of tons of coal lost that could have been saved if proper methods of mining had been used. The Room and Pillar system of mining coal is none. too good at its best ; a certain per cent of the coal is always lost, yet it is about the only system that can be used under certain conditions, but where the Longwall system can be used I believe it is the best system yet introduced. If the Longwall system is used' there is no coal lost. You get it all as you advance with the workings. Some coal operators object to the Longwall system for several reasons, and most of the reasons they advance are not founded on facts. For instance some of them claim it is too expensive. I will admit that the cost per ton is a little higher in Longwall than it is in Room and Pillar as a rule for the amount of coal' mined, but after the Room and Pillar mine is finished as a rule there are thousands of tons of good coal lost, for the simple reason that it cannot be mined at a profit. In many cases if the same mine had been operated on the Longwall system every ton of saleable coal could have been mined at a fair profit, and in the long run would have netted the owner much more money than it did under the Room and Pillar system. The Longwall system has been in operation many years in Europe and especially Great Britain, and is the most approved of systems in many countries at the present time. Millions of tons of coal have been saved by its use in those countries. It is claimed that the Armour Packing Company loses nothing but the squeal of the hog when it is killed, and doesn't allow it to squeal much. Why lose coal if the Longwall system of mining will save it? The Longwall mine is far more easy to ventilate than the Room and Pillar mine; the air has a much less distance to travel for the same amount of working face in Longwall than it has in the Room and Pillar.

Jan 1, 1921

By J. F. McDermott

The problem of converting our raw coal, and especially those coals that are not suited for long storage, in other words soft, into a fuel which would be at once clean; of a high B. t, u. content and low ash, is one that has occupied the minds of many able chemical engineers and hydrocarbon technologists during the past few years. Low temperature carbonization is the present outcome of this line of research, and many methods have been evolved of recent years to turn out a serviceable, useful fuel, and at the same time, save the by-products. As most of the research and data within my experience and knowledge pertains to lignite or sub-bituminous coals, I will confine my remarks to coals of that character and grade: I might say that Colorado coals, commonly called lignite, are not in reality true lignite, but are sub-bituminous, although I have in my possession an analysis of a Colorado coal which shows a moisture of 17 per cent, volatile 31.5 per cent, fixed carbon 28.8 per cent, and an ash of 22.7 per cent, and B. t. u. less than 8,000. Even this, though useless for domestic or indeed industrial purposes, could not be classified as true lignite. However, for the purposes of this paper I will refer to these coals as lignite. Two thousand pounds, or one ton, of raw lignite carries about 20 per cent moisture. This, of course, varies in some coals, but is, I believe, a fair average. For carbonization purposes this is usually dried to a 5 per cent moisture, therefore leaving but 1,700 pounds of coal to be placed in the retort. From present knowledge, and with the average process of carbonization, 70 per cent of this coal will come out carbonized, or 1,190 pounds, to which is added about 10 per cent pitch, which is fried out as the coal passes through the retort, and which is used as a binder, making a total of 1,360 pounds of coke or carbonized coal. This is usually in appearance a dark colored, rather porous coke of about the size of pea coal. It burns without smoke and have a very high B. t. u. content. According to most authorities on this subject, carbon, hydrogen, oxygen, nitrogen, sulphur and ash constitute the only elements on which carbonization value of a coal depends, and of these hydrogen is the most important. It is claimed the value of a coal for carbonization purposes may be roughly surmised from the hydrogen content. If this is promising, that is, showing an available hydrogen content of from 3 to 5 per cent, the coal should be given a careful ultimate analysis. Should the seam, as often happens in lignite coals, show varying bands of coal of different structure or appearance, samples should be taken from each band as well as a gross sample taken down the face of the seam in the usual way. This is in order to determine what part of the seam is most promising for by-product processes. A seam showing a high nitrogen content adds to the attractiveness of the coal in carbonizing as; if available nitrogen is 2 per cent or better, it should give a very high ammonia yield.

Jan 1, 1923

(The following discussion took place on this screen lecture in the dark.) MR. SHUBART: Would you give us a little .explanation as to the operation of this machine and what you are doing with it? MR. TESCHER: There is a 20- horsepower motor, rheostat, crusher, and a fan mounted on one base plate and operating on one shaft. The fan is overhung on the shaft. The only bearings you have are the bearings on each side of the crusher and the motor hearings. On one side of the ma- chine there is an opening for feeding shale. The machine is operated at 1,200 revolution per minute and as the shale is pulverized, the fan automatically exhausts fine dust from the crusher from an opening in the top of the crusher. The machine pulverizes 3,000 pounds in eight hours, reducing the materid to one hundred mesh. The last ma- chine we put in has been operating continuously fifteen hours a day for the past sixty days, without repairs of any kind. PRESIDENT LITTLEJOHN: Where is the machine in operation? MR. TESCHER. At the Royal mine. We have used ordinary mining ma- chine cable in local movements of the machines. This has enabled us to have twenty-two locations throughout the mines. The mine is highly gaesous, and the machines had to be placed on intake air. MR. SHUBSRT: What type of crusher do you use? MR. TESCHER. A No. 16 Universal, operating at 1,200 revolution per minute. M. SHURART: What material do you feed to it? MR. TESCHER: We have shale three-quarters of a mile from the mine. In the winter months we have been troubled with moisture. We build a kiln and get this shale and load it into the kiln for drying and then place it into a pit car and take it into the mine. The material must be dry. We have also used slate in the mine and have had good success. The slate at the mine is fairly hard. I presume, however, that the slate will probably carry a high silica content. MR. SHUBART: Mr. Harrington claims that silica does not do the harm, as was formerly supposed. MR. TESCHER: There is still a question as to whether it is harmful or not. PRESIDENT LITTLEJOHN: Are there any of these machines in operation closer than Aguilar? MR. TESCHER: There is one at the Alamo mine. Mr. Quealy also purchased a couple of them for use at his Wyoming mines. PRESIDENT LITTLEJOHN: Are there any other questions you would like to ask Mr. Tescher regarding his rock dusting machine while it is on the table for discussion? MR. DALRYMPLE, SR.: How many men does it take to operate it? MR. TESCHER: One man operates the machine. Sometimes we put the

Jan 1, 1925

By James F. Howe

Modern civilization is centered around a small group of essential occupations, the three principal ones which are agriculture, mining and manufacturing. Agriculture might be called the most important of the three, as it has to do directly with the supply of food for the human race. Mining, however, is certainly next in importance, as it furnishes the supply of fuel and many of the raw materials used in manufacturing. Without mining, modern machinery and many industrial operations would be impossible. Mining takes advantage of the, natural resources in fuel and minerals that lie underneath the surface of mother earth, and while at times some of these metals are hard to find and mines come and go, mining must continue to increase. Mining is no longer a haphazard proposition but one calling for careful study and complete plans of operation for years to come. The shafts, power houses, rock dump crusher, concentrator, and other machinery must be located advantageously in order to enable owners to make a profit. Many tons of rock or mineral must be mined frequently to get one ton of concentrated metallic ore or metal itself. Economy in mining is just as essential as it is in manufacturing. The mining engineer of today is called upon to utilize every branch of engineering, and not only, is a wide: range of knowledge required, but ingenuity to meet the unusual conditions which are constantly arising from week to week. On account of the wide variety of information required by the mining engineer, some things with which he is in almost daily contact may be passed over with only a small amount of attention, provided everything is going well, in order that time and attention may be focused on what might be termed the more important features of mining operations. Because competition has become keener than ever, owing to overproduction at times of certain minerals, it becomes a matter of first, importance to understand as far as possible the factors which enter into the cost of production of any mineral which may be mined. In such times of overproduction, the high cost mine is forced to close down while the low cost mine may, if desired, be kept running constantly. In keeping a cost record, wire rope on account of its high first cost 19 coming into the lime light, and a comparison of records of one mine with another is now frequently made in order to see whether the rope service is satisfactory or not. Every rope maker, on the other hand, is interested in seeing that the rope which he produces gives the maximum possible return for the money invested. Modern mining owes much of its success to the use of wire rope for hoisting materials from beneath the surface of the ground. Deep mining would be impossible without the use of wire rope as a means of hoisting. A study, therefore, of rope problems in mining work and a discussion of the points which are beneficial to maximum life will enable the mining engineer, manager, or superintendent to keep his costs down to the minimum while at the same time he provides a suitable and sufficient safety factor for operations at all times. Mining might be defined as the extraction of coal, metallic ores, or minerals from below the surface of the ground. This definition does not cover what is known as, open pit operations or quarrying but covers the

Jan 1, 1922