Search Documents

By Kaihui Yang

Volcanogenic massive sulfide deposits are generally considered to have been formed by hydrothermal fluids that leach ore metals out of footwall rocks. However, the necessity for a metal-rich magmatic component in the ore-forming fluid of "giant" ore deposits has been debated over the decades. The solution to this issue is important not only for metallogenic models but also for the mineral exploration. In the hydrothermal leaching model, massive sulfides at mid-ocean ridges are deposited from hydrothermal fluids containing 80 ppm Fe, 6 ppm Zn, 2 ppm Cu, 350oC, and 0.7 g/cm3 density (average data for 21oN East Pacific Rise). A simple calculation demonstrates that such a dilute fluid is unlikely to have been responsible for the formation of the largest ancient massive sulfide ores of greater than 100x106 tonnes, such as Kidd Creek, Brunswick No. 12, Neves Corvo, and Rio Tinto. For such a deposit consisting primarily of pyrite, sphalerite, galena and chalcopyrite (other minerals, including gangue, might account for an additional 10-20%) and even assuming 100% precipitation and retention of the sulfides, more than 790 km3 of vent fluid would be required. For typical water-rock reaction ratios of about 2, this fluid would have to have reacted with about 395 km3 of rock to acquire its metals by conventional leaching processes. This estimate, however, conflicts with the observation that even a giant massive sulfide ore body is usually underlain only by a few cube kilometers of obviously altered rocks. Moreover, this model is not consistent with the observation of hanging wall alteration in many large massive sulfide deposits. The close spatial association between massive sulfides and volcanic rocks, in both ancient and modern sea floors, suggests that direct magmatic contribution should be taken into account in the genetic model. Magmatic fluids, capable of carrying abundant ore metals and volatiles and escaping from magma by depressurization, are well known from modern active volcanoes on land. High concentrations of metals occur in CO2-rich magmatic fluid trapped in felsic volcanic rocks nearby large presently-forming VMS deposits in the eastern Manus Basin (Pacmanus, Suzette) and also in the footwall rocks of Ordovician giant Brunswick #12 deposit in the Bathurst district, New Brunswick. Only 1% of such metal-rich magmatic fluid mixed with heated sea water, that has leached its metals from rocks, would contribute 85% of the total metals to form an orebody. Such magmatic fluids are most likely to be formed from volatile-rich felsic magmas that are prevalent in back arcs, and, if added to the normal circulation system, the fluids could be responsible for the formation of "giant" ore deposits. If this is true, then the study of magmatic fluids in the seafloor volcanic rocks may provide criteria for the exploration of large ore deposits.

Jan 1, 2011

By Wilhelm Schwarz

Manganese nodules lay in vast areas of the deep sea floor. Ideal harvesting conditions for a manganese nodule field are dense nodule abundances of nodules between 20 and 60 mm diameter and a metal content as high as possible. With regard to the development of collector technology, the properties of the deep sea soil, in which the nodules are embedded and to which the nodules stick, are of major interest. The forces for loosening the nodules have to be provided by the collector. For this purpose water jets and/or mechanical devices can be employed. For the choice of the best collecting procedure, various criteria, such as collecting rate, energy consumption and the environmental impact on the eco system of the deep sea floor, have to be considered and weighted as to their importance. Nowadays, the concept of a mining system with a flexible transport hose and a self propelled collecting machine is increasingly accepted among the expert community. With regard to the trafficability of the deep sea soil with a self propelled mining machine, the mechanic properties of the soil and the morphology of the deep sea floor are of special importance. The manganese nodule fields, which are interesting with regard to their recoverability, are mostly in the areas of tectonic fracture zones, at which the morphology of the sea floor is formed by vulcanic activities. In these areas, deep sea mountains, pits and other obstacles exist that have to be driven around if not trafficable.

Jan 1, 2003

By Janine Lahr, Peter E. Halbach

The Manus Spreading Ridge is located within the EEZ of Papua New Guinea and lies in the Manus Basin ENE of the PNG Island and N of the Island New Britain. The divergent backarc spreading system is caused by the subduction of the Solomon plate in the South under the Bismarck plate in the North along the lineament of the New Britain trench. The rate of divergence is relatively high compared to other back arc spreading systems and amounts up to 12 cm/year [3]. Since submarine volcanism and associated hydrothermal circulation as important parts of the oceanic heat transfer system are also dependent on the rate of spreading, hydrothermal fluid venting and respective deposition of polymetallic sulfides can be expected there. In late 1985 first indications for hydrothermal activity were observed on a swell within the central rift valley of the Manus Spreading Centre during a photographic survey of the seafloor by an expedition of the Hawaii Institute of Geophysics with the American RV Moana Wave [1]. Detailed geological investigations including successful sampling were first carried out in June 1990 within the scope of the OLGA II research project (conducted by Prof. Tufar, Marburg) using the German RV Sonne equipped with a deep-sea television sledge and Tvcontrolled grab systems. Simultaneously a research cruise with the Russian RV Akademic Mstivlav Keldysh took place using the manned submersible Mir; the findings of the OLGA II cruise were immediately used for planning and organization of the Mir dives [3]. The massive sulphide samples which we used for our geochemical and mineralogical studies originate from the hydrothermal fields 1 and 2 and are from grab stations of the OLGA II expedition [4].

Sep 24, 2006

By Mike Woodborne

The marine diamond industry off south-western Africa is maturing rapidly. Some of the larger explorers have reached an advanced stage in their resource development and new mining operations have been started in the last year. Most of the major exploration, mining and marine engineering companies have offices in Cape Town. As a result of the increased activity and experiences to date, new approaches to marine diamond exploration and mining are now evolving. Primary factors contributing the new approaches are namely 1) the concentration of expertise in a localised area 2) the significant increase in the base of available exploration and production results and 3) parallel advances in the marine engineering design and geophysical survey equipment. The sea floor geology and setting of the marine diamond exploration areas is now better understood. Consequently the strategy for exploration and the selection of appropriate survey equipment is improved. Due to new equipment developments, different exploration alternatives now exist, depending on the programme objectives. Significant advances have also been made in the data processing and modelling undertaken to assist in the identification and targeting of potentially diamondiferous prospecting features. Similarly, the design of appropriate prospecting tools and programmes has also been improved. Following exposure to the requirements of the marine diamond industry, the design engineering and operating companies have responded with innovative designs for new prospecting tools. In recent years the availability of relevant information on marine diamond prospecting and production has increased. As a result, there is now sufficient basis for the construction of meaningful financial valuation models that can be effectively used to control and guide the exploration projects, to the benefit of both the explorer and the investor.

Jan 1, 1998

By Keith Gordon

The recent discoveries of hydrothermal activity in the ocean off New Zealand have created interest in the business community in the commercial possibilities of mining associated marine polymetallic sulfides. This interest is more so, as this hydrothermal activity is in much shallower depths, between 120 ? 1800 meters, than the typical 2400m in other parts of the oceans. Mining for other ocean deposits around NZ, such as phosphate nodules and off-shore deposits from gold bearing river beds is also attracting interest. The question is: - how can these deposits be mined without spending the enormous sums of money required for specialized mining technology? There are no dedicated off- the-shelf systems designed exclusively for underwater mining. Such systems require expensive development and manufacturing processes and then, are most probably designed for only one specific purpose. The costs involved place such equipment beyond the means of smaller entrepreneurial groups and only the big companies have the resources required. However, large companies are normally reluctant to take the risk of investing large sums of money into deep ocean projects. Australia and New Zealand, until recent times, have been somewhat isolated from European and North American technical resources - especially in the field of underwater technology. Over the past century such isolation has often led to solving problems with what has become locally known as ? ?the number 8 gauge wire method?. This approach to problem solving entails using whatever is available to get the job done and keep costs down. In the old days with NZ technology being mainly based around farming, a piece of No. 8 gauge fencing wire, although not designed for the purpose, was often used to fix various problems ? hence the term.

Jan 1, 2002

By Lorena Blanco, Guillermo Gómez-Ramos, Iker Blasco, Egidio Marino, Luis Somoza, Ricardo León, Teresa Medialdea, Javier González

"This study presents the first catalogue of marine mineral deposits and energy resources along the continental margin of Spain. Aggregates, oil and gas and metalliferous mineral areas have been defined and mapped. The catalogue, implemented in a geographic information system (GIS), is conceived as a first national database within the European network, which is being built as part of the EMODnet-Geology project. It comprises 8 types of mineral and energy resources for the Spanish margins: aggregates, hydrocarbons, evaporites, placer deposits, phosphorites, polymetallic sulfides, polymetallic nodules and cobalt-rich ferromanganese crusts (Figures 1 and 2). The catalogue stores a total of 409 marine mineral deposits and compiles information such as name, deposit type, main morphology, main minerals, setting or area extent for each mineral deposit. By number of deposits compiled, the aggregates are the most abundant (286) followed by hydrocarbons (62), cobalt-rich ferromanganese crusts (32), evaporites (9), placer deposits (8), phosphorites (5), polymetallic nodules (4) and polymetallic sulphide deposits (3). Considering the total extension, hydrocarbons (32,386 km2) and cobalt-rich ferromanganese crusts (24,951 km2) represent the biggest areas.The Geological Survey of Spain (IGME) is developing a new tool in the catalogue, according the International Seabed Authority (ISA) Database parameters, for individual samples on each ferromanganese deposit. The database includes an extensive collection of records that comprise five information groups: general cruise and sample data, physical properties, mineralogy, geochemistry and acronyms used. New attributes have been incorporated, in example: geophysical, sedimentological and petrological data in the deposit area, sample weight, porosity, morphology, textural and structural features, geochemistry of major, minor and trace elements (included REEs and PGEs) and supplementary cruise and laboratory reports. This new database complements the EMODnet-Geology project minerals catalogue, offering a deeper level of information for the areas with major potential for mineral or energy resources as they are the Canary Island Seamount Province, the West Margin of Galicia and the Gulf of Cadiz."

Jan 1, 2017

By V. Soloviev

The world?s data available on near sea-bottom gas-hydrate accumulation and deep-water fluid-discharge areas are presented in this paper. Gas-hydrate accumulation associated with fluid discharge (mud volcanoes, gas seeps, gas-saturated water seeps) is characterized by the following. First, the largest hydrate accumulations in sediments are located at shallow subbottom depths and have well-defined limits, especially in the upper subbottom part. Second, gas-hydrate formation in fluid-discharge areas is a present-day process, with the global occurrence of deep-water fluid-discharge areas numbering up to about ten thousand, and with all the seep areas being favorable for the formation of near-sea-bottom gas-hydrate accumulation. Third and principal, gas resources in the hydrates can be considered as renewable. Estimates of possible gas volume in single accumulations of hydrates and the global budget, as well as possible methods of gas utilization from such gas-hydrate accumulations are discussed in the paper.

Jan 1, 2005

By Nobuyuki Okamoto

The present three-year long phase of the SOPAC/Japan Deep Sea Co-operative Mineral Resources Programme [Programme], commenced in 2000. The Programme has been funded by the Government of Japan through the Japan International Co-operation Agency (JICA) and the Metal Mining Agency of Japan (MMAJ), since 1985. Field survey activities and associated data analysis and interpretation, for the Programme, has largely been carried out by the Deep Ocean Resources Development Co., Ltd. (DORD). The Government of Japan has, since 1982, recognised DORD as one of its ? Pioneer Investigators? for manganese nodules in the Clarion Clipperton Fracture Zone . Although the objective of this paper is to present the results of the drilling cruise that was conducted from December 2001 to January 2002, within the North Fiji Basin, in Fiji?s EEZ, it will also seek to provide a broad overview of the results of the cruise conducted within the Cook Islands in May to June 2000, as well as present preliminary results of the cruise conducted in the Marshall Islands in June to July 2002.

Jan 1, 2002

By Katherine H. Walton

The research affiliate projects of the Continental Shelf Division of the Marine Minerals Technology Center concentrate on the development of technologies and methodologies for the exploration 4 and assessment of nonfuel continental shelf mineral resources within the U.S. Exclusive Economic Zone. Three of the FY 1990-91 research grants are summarized below. Scientists at the Center for Applied Isotope Studies at the University of Georgia have developed ?An Advanced Design for a Seafloor Gamma Isotope Mapping System? for the rapid collection of data on seafloor sediments. This system is designed to detect gamma radiation emitted by naturally occurring radioactive elements found in marine sediments. This data can be used to study seafloor lithology and has direct application in marine mineral surveys. The purpose of this study has been to redesign and calibrate the system for marine mineral survey work. Recent modifications of the sled design, gamma radiation detector, and supporting software have resulted in considerable improvements in sensitivity, functional operation, and data acquisition.

Jan 1, 1991

By Ye Jun

Until now, more than 200 sites of sea-floor hydrothermal activities are known on the midocean ridge but few of them are documented on South Mid-Atlantic Ridge (SMAR). This on some extent restricts our directly understanding of the hydrothermal mechanism on SMAR. In 2011, During the Cruise 22 of R/V Dayangyihao, a masive sulfide field was discovered in the center part of the first-order ridge segment that bounded between Cardno Fracture Zone and Saint Helena Fracture Zone, near 15.16°S/13.35°W, which give us an opportunity to recognize the mechanism of hydrothermal systems on SMAR directly. This newly discovered hydrothermal field, which informally called SMAR 15°S, is situated in a SE-NW offset depression of an axial neovolcanic ridge, with water depth of about 2793m. In the water column around this field, strong turbidity and temperature anomalies were detected. Ten meters high venting chimneys, hydrothermal mounds as well as a large amount of hydrothermal vent shrimps were also observed and recorded by ROV and Deep tow camera on the ocean floor. The samples we collected from this field include sulfide chimney fragments, massive sulfides and basaltic rocks. In this study, we are focusing on the mineralogy and sulfur isotope geochemistry of sulfide samples for preliminarily uncovering the geological characteristics and hydrothermal processes of this hydrothermal field.

Sep 14, 2011

By Winston Rocher Anda

Traditionally, mining activities have been developed in firm land, but technological advances and human needs have opened in the last year?s new opportunities in the maritime field. This has happened not only in the oil or hydrocarbons industries, but also in relation to the exploration or exploitation of other minerals, metallic and non-metallic. This has forced several countries to complement or create legal rules that make possible its own development and the International Law, through the United Nations Convention on the Law of the Sea, to regulate this activity in the space of its own, the calling area. Chile, as country with a long experience in mining and great advances in large deposits exploitation, possesses a special juridical frame that regulates this economic activity according if it is the geographical or territorial area in which is realizes, and it has been complemented lately with the international normative.

Jan 1, 2011

By M. Ye. Melnikov

The report is about oceanic ferromanganese crusts ? covers of iron and manganese hydroxides developed over an opened rock of seamounts and rises. Ore bed parameters of crusts are understandable as their thickness and content of main economic components ? manganese, cobalt and nickel. All known results of research activity on ferromanganese manganese crusts point to that crust are characterized by notable variability of thicknesses and composition. It is possible to separate few levels of variability. The most evident is the first level of parameters variability, which is manifested in various regions of the Ocean, and connected first of all, with an age of submarine mountains, a host objects for a crusts. It was proved by many authors, that most powerful crusts are connected with submarine mountains of Cretaceous age. [1]. Crust thickness at the Magellan Seamounts reaches, for example 12-15 cm, sometimes exceeds 20-22 cm. Thicknesses of Hawaii Archipelago or Tuamotu crusts in 3-4 times less. Biostratigraphy studies of crustal sections at the Magellan Seamounts already show, that its main part started to form in the Late Paleocene. Four layers with well expressed features in structure and composition of a layer are separated in the section. From foot to top: Late Paleocene ? Early Eocene layer I-1, Middle-Late-Eocene layer I-2, Miocene layer II and Pliocene ? Quaternary layer III. Relics of more ancient Campanian ? Maastrichtian ore layer [2, 4] were discovered. It is evident for example, that Oligocene mountains could not be a host for two lower layers in the crust section.

Jan 1, 2010

By S. Jeffress Williams

The U.S. Geological Survey (USGS), over the past three decades, has carried out a spectrum of geologic surveys and research in marine areas of the Exclusive Economic Zone (EEZ) around the U.S. and its territories as well as in the Great Lakes region. Regional and topical studies have been undertaken throughout the range of marine environments: estuarine, tidal wetlands, coastal and nearshore, shelf, slope, and the deep ocean basins. The Survey's coastal and marine research programs consist of four elements shown in Table 1. The first includes studies using interpretations of bathymetry, seismic-reflection and sidescan sonar data, and analyses of sediment grab samples and cores to develop an understanding of the geologic framework. Information on the geologic setting, including the subbottom structure and stratigraphic relationships, and the geologic history and evolution of the areas surveyed are important parts of the program objectives.

Jan 1, 1992

By Justin C. I. Baulch

In October 2004 Placer Dome entered into an exploration farm-in agreement with Nautilus Minerals, to explore for Submarine Massive Sulphide (SMS) deposits on Nautilus? PNG exploration tenements. Placer/Nautilus currently holds approximately 15,000 km2 of tenements in PNG waters, either granted or under application, covering all reported seafloor hydrothermal vent occurrences.

Jan 1, 2005

By Dorothy B. Niell, O&apos

In its first three years of operations, the in-house programs of the continental Shelf Division of the Marine Minerals Technology Center (MMTC/CSD) have focused on the development of drill systems - technology and the improvement of techniques and applications of reconnaissance methods to marine mineral deposit characterization. Many of the technological advances made to date have been in direct response to specific requests from industry for drill systems needs, and from federal and state agencies seeking technical support for various research efforts. These cooperative programs have proven to be an extremely efficient and effective way for the MMTC to achieve some of the main program goals that were established for the organization at the outset: primarily, to encourage and assist U.S. industry in marine minerals research activities and to encourage cooperative work among research institutions, government agencies, and industry. The primary achievements of the MMTC/CSD to date include the development of the Remote Placer Drill System for rapid reconnaissance drilling of precious metal placer deposits (including both pneumatic prototype and hydraulic production

Jan 1, 1991

By Cheong-Kee Park

Since 1983, Korea Ocean Research and Development Institute (KORDI) have performed surveys on deep-sea mineral deposits in various areas with respects to their occurrences in Pacific ocean including manganese nodules in the C-C area of Northeast Pacific, Co-rich manganese crusts in various seamounts of West Pacific and hydrothermal sulfide deposits in back arc basins of Southwest Pacific. Among the results of these activities of KORDI, remarkable things were the registration as a pioneer investor in 1994 through the Government of Korea and the accomplishment of relinquishment on the allocated area in 2002 according to the relevant regulations. KORDI is faced to handle detailed surveys to select the optimum mining sites in the allocated area of 75,000 km2 and environmental studies to meet the requirements of the regulations or recommendations of the ISA. In respects of future exploration strategies, it is considered that methods and tools of previous exploration activities should be changed to the highly advanced technology. Establishment of an advanced exploration system and actual practice in appropriate areas become one of important tasks of KORDI in exploring deep-sea minerals, particularly manganese nodules. A technical strategy for future detailed surveys in the allocated area is realization of simultaneous and precise data acquisition on bottom information, such as variations of microtopography, nodule distribution, and transparent layer thickness of sediments in relatively small area (10 km x 10 km) representing certain specific regions, by high resolution survey technology. It would be not only a challenge for new exploration system in deep-sea environment, but also a mission for deep seabed mining venture.

Jan 1, 2003

By Cees van Rhee, Rudy Helmons

INTRODUCTION Seafloor Massive Sulphides are typically found near the oceanic ridges at larger water depths (>1km). The physical properties of SMS, as shown in table 1, are comparable to the properties of weak rock. One of the technical challenges to enable extraction from these locations is the cutting or excavation process. Experiments have shown that the energy needed to excavate the material may increase with water depth (Alvarez Grima et al. 2015). Besides that, it is demonstrated that rock that fails brittle in atmospheric conditions can fail more or less in a plastic fashion when present in a high pressure environment, as would be the case at large water depths. The goal of this research is to identify the physics of the cutting process and to develop this into a model in which the effect of hydrostatic and pore pressures is included. The cutting of rock is initiated by pressing a tool into the rock. As a result, at the tip of the tool a high compressive pressure occurs, which leads to the formation of a crushed zone. Depending on the shape of the tool and the cutting depth, shear failures might emanate from the crushed zone, which will eventually expand as tensile fractures that can reach to the free rock surface. Through this process intact rock will be disintegrated to a granular medium. For an overview of the process (figure 1). Additionally, the presence of water in the pores of and surrounding the rock influences the cutting process through drainage effects. The most relevant effects are weakening when compaction and strengthening when dilation occurs in shearing and tension. Deformation of the rock causes the pore volume to change, resulting in a under or over pressure. As a result, the pore fluid needs to flow. The magnitude of the potential under pressure is limited through cavitation of the pore fluid, limiting further reduction of the pore pressure (figure 2). The drainage effects cause the rock cutting process in a submerged environment to show a stronger dependency of both the hydrostatic pressure as well as the deformation rate (figure 3).

Jan 1, 2018

By Teruyoshi Narita

In Japan, the Ministry of Economy, Trade and Industry (METI) commenced a research and development (R&D) project on seafloor massive sulphides (SMS) in Japan?s exclusive economic zone (EEZ) in the 2008 fiscal year. In this plan, the road map of Resource evaluation, environmental impact study, mining system technology and processing technology fields consisting of the first and second stage has been shown for the commercialization of SMS. Based on this road map, Japan Oil, Gas and Metals

Sep 14, 2011

By Akira Usui, James R. Hein, Rachel Dunham

Ferromanganese crusts are found on most hard-rock substrates in the deep ocean (800-3,000 m). Their distributions on seamounts are complex and controlled by a wide-variety of factors including seamount morphology, current patterns, mass wasting, substrate rock type and age, subsidence history, and others. However, the development of this potential resource ultimately depends on this distribution, as well as on the small-scale topography, grade, and tonnage. The parameters that will ultimately be used to define a mine site are unknown, but reasonable assumptions based on 25 years of data collection can be used to bracket likely permissive characteristics.

By Luana Karvel, Lars Kullerud, Morten Sørensen, Øystein Halvorsen, Øivind Lønne, Elaine Baker, Tina Schoolmeester, Joan Fabres, Yannick Beaudoin

The UNEP Shelf Programme (USP) is the access point for a collaboration of international organizations with expertise in marine geoscience and maritime law. It was established in response to a United Nations resolution, stating that the United Nations Environment Programme (UNEP), working through the Global Resource Information Database (GRID) system, should work in conjunction with Intergovernmental Oceanographic Commission of UNESCO (IOC) and the International Hydrographic Organization, to assist coastal States, and in particular developing States and small island developing States (SIDS) with submissions to establish the outer limits of their continental shelf under Article 76 of the United Nations Convention on the Law of the Sea (UNCLOS).