Search Documents

By Richard T. Haworfh

The United Nations Convention on the Law of the Sea (UNCLOS) entered into force, for those nations who had ratified it, on November 16, 1994. The Convention deals with nearly every aspect of ocean affairs, including marine scientific research, fishing zones, freedom of the high seas, protection of the marine environment and deep seabed mining. Article 76 of the Convention defines edge of the continental shelf in a way that many earth scientists find bizarre. Out to this limit, a coastal state has sovereignty over the seabed and sub-seafloor resources. Beyond that limit, the key principle of UNCLOS, that "the resources of the deep seabed represent the common heritage of mankind and should be developed to benefit all nations" is invoked. Establishing that limit and managing development in the different areas of jurisdiction is no small task. Canada's continental shelf as defined by UNCLOS covers an area approximately equal to half the area of the Canadian land mass. Interpretation and application of the convention is therefore highly significant for Canada. For example, the sedimentary basin in which the offshore Hibernia oil field is found, extends beyond the 200 mile limit but lies predominantly within the limits of the (UNCLOS) continental shelf. Responsibility for development of inshore placer deposits rests firmly with the coastal state. However, development of deep sea mining, in which the international community plays a management role under UNCLOS, has raised many concerns. Of particular interest to Canada will be the application of the provisions of the convention to interest in the polymetallic sulfides sampled on the mid-ocean ridges such as the Juan da Fuca Ridge. A further complicating factor for Canada is management of fishing stocks. Canada has sought to resolve this "problem" through multilateral negotiations under the UN. Under its "Oceans Act," currently being debated by Parliament, Canada intends to become a world leader in oceans and marine resource management. Similar activity in most maritime nations is setting the stage for a revolution in the way in which use of the world's oceans is managed. Much of this revolution will be guided by UNCLOS. Coastal states that have ratified the convention have ten years in which to define the limits of their continental shelves the clock is already ticking for them! We have yet to see how their actions will guide, or be guided by, those who have not yet ratified. We also have yet to see how national legislation and aspirations will mesh with international conventions that were drawn up in a previous era of environmental standards. This is a time in which many questions have been raised and few firm answers received. However, we must ensure that everyone is aware of what is happening, with what potential consequences, in order that rational decisions can be made. Canada has taken a few small steps that it is happy to share with the world community.

Jan 1, 1996

By J. Robert Woolsey

The Marine Minerals Technology Center (MMTC) was established by Congress in FY 1988 as part of the Mineral Institutes Program, administered by the U.S. Bureau of Mines under the auspices of the Department of the Interior. The primary objective of the MMTC is to encourage the development of selected mineral materials from U.S. seabeds by providing opportunities for appropriate engineering systems research, development, and technology transfer within academic, government, and industrial communities. The center will also provide the leadership and facilities required for the education and training of the nation's scientists and engineers in the field of ocean mineral development. Because of the broad spectrum of study encompassed by the field of ocean mining and mineral resources, the MMTC is organized to include separate divisions for nearshore and deep ocean research. The Continental Shelf Division is administered by The Mississippi Mineral Resources Institute (MMRI) of the School of Engineering at The university of Mississippi. Operational activities will be based at the John C. Stennis Space Center near Bay St. Louis, Mississippi and the Gulf Coast Research Laboratory, Ocean Springs,

Jan 1, 1988

By Marco Figoni

The increased interest on deep water minerals resources is a challenge for both mining and oil industry. The exploration and production of oceans minerals require a synergy between of different technologies. While mining industry is leading the dredging and processing part of the system, oil industry is contributing through development of ore lifting technology based on existing subsea knowledge. The paper presents an overview, based on published projects around the world, of different approaches to marine mining. Several exploration techniques and offshore production systems were already designed and assessed, all of them with apparently positive results. Exploration phase is well advanced and in continuous expansion allowing the discovery of increasing resources around the world of different nature but production can be considered to be in an early stage. Different from onshore mining, subsea operations require a closer cooperation with international and local authorities to preserve as much as possible the environment. There are still many uncertainties at respect and all the exploration process must be carefully evaluated to allow subsea mining to develop in a sustainable manner. Technically, mining at seabed was already demonstrated and the process is based on three main components, namely seafloor mining tools, riser and lifting system and production vessel support. This layout is based on the concept that ore must be disaggregated at seafloor first, transported to surface in form of slurry that must be dewatered before loading to be transported to processing plants onshore. The challenges are rising because the environment and safety must be taken into consideration as a priority when evaluating the efficiency of the system. The most critical challenges regarding the production operations, especially in deep water are the deep-sea excavation process, the transport of large slurry volumes, the slurry abrasivity, the power supply management and the subsea

Sep 14, 2011

By Ning Yang, Sup Hong

INTRODUCTION Metal components contained in deep-seabed mineral resources are being highlighted as “energy metals”, which are widely utilized in the entire fields of energy: harvesting and generation, storage and transportation, and saving. Those are mostly trace and rare metals, and rare earth elements as well: manganese, nickel, cobalt, copper, molybdenum, tellurium, selenium, platinum, etc. Toward low carbon society, for global sustainability, the role of metals and minerals is growing up in industries of energy and transportation [1]. In this context, the production and supply of energy metals from deep seafloor have to be approached also based on sustainable development. In deep-seabed mining activity, the sustainability is focused on potential impacts on ecosystems in benthic area and water column. The environmental impacts in deep-seabed mining are caused basically by intervention in benthic zones and transportation of materials. Those are, in particular, removal of benthic habitats, generation and dispersion of sediment plumes, surface transportation of seawater and sediment, tailing from mining vessel, sound and light noises, and chemical leakage, etc. This paper is aiming at fundamental guidance towards sustainable mining of polymetallic nodules.

Jan 1, 2018

By Subramanian Rajendran

Placer minerals are one of the rich natural resources readily made available primarily and broadly in the form of inland placers, beach placers and offshore placers. The exploitation of placer minerals goes back in the history for a period of time immemorial in the form of alluvial placer mining. In India only 35% of coast has been scanned for beach placer minerals. The buried inland placers and offshore placers have not been given due attention. Integrated management and sustainable development of coastal and Open Ocean including the EEZ are of great importance to us. Judicious exploitation of non-renewable mineral resources plays an increasingly important role with regard to future economic and social development. This calls for newer techniques for exploring and analyzing more the seafloor. Though India could remain in the placer mining for the last four decades through the establishment of the Indian Rare Earth in both east and west coasts, the lack of necessary dynamism to expand such industry and catch the world market points out a significant setback. It is highly essential to establish the major trends of paleo-beaches, since some of them are definite to contain highly rich heavy mineral placers comparable to the one being mined by beach scraping. Placer deposits of heavy minerals occur in discontinuous patches on the beaches along the West Coast of India. In recent years the National Institute of Oceanography, India and the Geological Survey of India attempted to invest on nearshore placer exploration by applying the integrated survey techniques.

Jan 1, 2001

By Andrea Koschinsky, Luise Heinrich

(for an oral presentation) Activities for preparing future deep-sea mining offer the unique opportunity to study environmental conditions and anticipate adverse environmental impacts prior to the commercialization of the activity. Until know, environmental research has first and foremost focused on understanding direct impacts occurring at the seafloor or in the water column such as the removal of substrate, the suspension of sediment or the creation of particle plumes. Impacts occurring above the sea surface have thus far rarely been considered. The operation of deep-sea mining equipment, as well as of mining and transport vessels will be associated with a considerable energy demand. In the open ocean, this energy will be provided by heavy fuel oil (HFO), which is the cheapest and most common marine fuel. The combustion of HFO will be associated with the release of greenhouse gases and other pollutants. Deep-sea mining will thus directly add to already critical air pollution levels caused by international shipping. To contribute to a holistic assessment of deep-sea mining impacts and to address the previously outlined knowledge gap, we present the methodology to quantify the fuel consumption and associated emissions of a potential typical commercial manganese nodule mining operation in the Clarion-Clipperton Zone (Fig.1). Using the mine set up and energy demand estimates from a study commissioned by the German Federal Ministry of Economic Affairs and Energy supplemented by information from literature, we anticipate emissions of carbon dioxide (CO2), carbon monoxide (CO), methane (CH4), nitrous oxide (NO2), nitrogen oxides (NOx), sulfur oxides (SOx), particulate matter and non-methane volatile organic compounds.

Jan 1, 2018

By V. Zaykov

The Urals massive sulfide deposits are concentrated in Silurian -Devonian fold belt extending for 1500 km with length from 50 to 150 km. By paleodynamic reconstmction it is established that they were formed in submarine parts of island arcs, in inter arc and back arc basins, marginal seas. When "black smokers" were found in rift zones of present oceans, problem searching their analogues in the Urals Paleozoic complexes was arisen. For solving this problem and demonstration of seafloor origin of massive sulfide many quarries and drill cores were carefully sketched and studied. Particular attention was given to correlation between ores and synchronous sedimentary rocks and fossils. Various laboratory methods were used for comparing sulfides from ore hills with ore-clastic sulfides.

Jan 1, 1993

By Andreas Kaede

INTRODUCTION Due both to the political history of UNCLOS and the sensitivity of the ocean floor and environment to man made impacts, both the Convention (including also the 1994 Amendment) and subsequent codification (such as the ISA draft code on Exploitation of Mineral Resources in the Area) put a focus on information about, and conveyance of, technology employed by interested deepsea mining companies, to inter alia the Authority and developing countries. In contrast, companies usually are (or by their nature should be) interested in safeguarding their technology and business secrets in order to secure unique selling propositions in a competitive environment. On the background of the meanwhile maturing regulatory régimes on deep sea mining, the presentation will look into some of the key regulatory provisions mirroring these apparently antagonistic interests, how the players involved could deal with them, and how they might in some cases be reconciled. Progress of Presentation The presentation will start by briefly examining some classical methods of protection of technology, such as patents, copyrights, and (not the least) secrecy. It will be found that some of the statutory means of protection due to their territorial character may face problems in being implemented in areas outside national jurisdiction, such as the Area, but that, thinking globally, they nevertheless retain much of their value for the purpose of protection. Depending on available presentation time, a model case may be used to illustrate the above – and also some of the following – findings.

Jan 1, 2018

By Benjamin W. Haynes

The Federal government has a lengthy history in supporting and conducting research in the ocean mining and minerals field. The Federal effort has been and is currently focused primarily in four agencies: the National Oceanic and Atmospheric Administration (NOAA) within the Department of Commerce, and the Geological Survey (USGS), the Bureau of Mines (BuMines), and more recently the Minerals Management Service (MMS) within the Department of the Interior. While NOAA and the USGS have played dominant roles in mapping and geologic studies, and the MMS has recently provided funding for several task force studies within the Exclusive Economic Zone (EEZ) , the Bureau of Mines has conducted research in mining technology, minerals processing, resource definition, and economic evaluation of minerals from the seabed for over 20 years. These studies have yielded considerable minerals information regarding manganese nodules and crusts, placers, mineral sands, phosphorites, and sulfides. This paper reviews the past achievements in ocean mining and minerals programs starting in the late 1960's, describes current research and information efforts, and presents an outlook for Bureau of Mines research and information gathering efforts. Specific topics

Jan 1, 1989

By Ian Selby

Resource management is a key factor in the operation of a successful marine aggregates business; it is integral to the development of sustainability, satisfying increasing commercial, quality, and environmental performance standards. Resource management is based on the combination of; (i) a thorough evaluation and understanding of the resources on the sea bed and (ii) a dredging plan targeted to permit the effective and efficient extraction of the resources whilst mitigating impacts and leaving the sea bed ready for recolonisation.

Jan 1, 2004

By In Kwon Um

The XRF Core-Scanner system performs non-destructive analysis of elements from Mg to U, in concentrations of ppm levels on split cores with digital images. Using the AVAATECH XRF Corescanner system, we conducted high resolution element analysis of deep sea sediment cores from Clarion-Clipperton fracture zone of the northeastern Pacific to reveal recent environmental changes. Comparison of data estimated by the XRF core scanner with ICP-AES showed relatively weak correlation coefficients except Mn contents. Down-core variations of most elements seem to be matched with each other and reflect changes of sediment colors. Especially Mn/Al ratio significantly change at distinct color boundaries. The variations of Mn/Al ratio with sediment colors are suggestive of changes in redox condition and further divided into two types probably affected by activities of benthic organisms. Be isotope age datings of select core (BC08-02-13) indicate that the color boundaries are approximately coincident with late Pliocene and Pleostocene also early Pliocene and late Pliocene boundary. Keywords: XRF core scanner, High resolution, C-C zone

Jan 1, 2011

By Sven Petersen

In April 2010 three REMUS6000 series autonomous underwater vehicles (AUVs) have been used to simultaneously map large areas near the Mid-Atlantic Ridge (3°N) axis in water depths ranging from 1,000m to 4,000m. One vehicle was provided by the Leibniz-Institute for Marine Science, IFM-GEOMAR (Kiel, Germany) the other two were provided by the Waitt Institute for Discovery (La Jolla, USA) and managed by the Woods Hole Oceanographic Institute (USA). The REMUS6000 vehicles, manufactured by Hydroid Inc. (USA), are "cigar-shaped" vehicles (4m long and weighing approx. 900kg) and consist of a tapered forward section, a cylindrical midsection and a tapered tail section. An internal titanium strongback, which extends through much of the vehicle length, provides the structural integrity and acts as a mounting platform for syntactic foam, equipment housings, various sensors and release mechanisms. The AUVs can be used in various payload configurations such as multibeam bathymetry, electronic still camera, or subbottom profiler. For these missions the electronic still camera configurations was installed. An EDGETECH 2200M dual frequency (120/410 kHz) side scan sonar was used to map the seafloor, but other frequencies are readily available for more options in resolution and range. The 120 kHz side scan transmitter was used for most missions in order to map large areas (increased range) and to be able to fly at higher altitudes (between 70m and 90m) above the rough seabed encountered in this area. The maximum slant range was between 600m and 700m on both sides resulting in a swath width of up to 1.2 km. Line spacing ranged from nearly 1,000m in flat areas down to 400m in steep terrain. Side-scan mosaics were generated with a 1m resolution. Selected areas were targeted by the higher resolution 410 kHz transmitter as well as by bottom photographs flying as low as a few meters above the seabed. The vehicles navigated autonomously using a combination of inertial navigation (Kearfott T-24 or T-16 INS) and long baseline acoustic navigation by computing their range to two moored acoustic transponders. Working efficiently in this rough topography at speeds above 3 knots was only possible due to the obstacle avoidance capabilities of these AUVs.

Jan 1, 2011

By Stanley R. Riggs

Onslow Bay is a broad, shallow, high-energy shelf system bounded by the Cape Lookout and Frying Pan shoals. It is generally a sediment-starved shelf system dominated by hardbottoms with a scattered and discontinuous veneer of mobile Holocene sediments. Phosphate-rich beds of the Miocene Pungo River Formation crop out in a belt 150 km long and up to 50 km wide across the continental shelf in Onslow Bay, North Carolina. Previous research has demonstrated that a few of these beds contain vast quantities of potentially economic phosphate resources that occur in the surface and shallow subsurface sediments. Onslow Bay contains five phosphate-bearing beds predicted to include up to 20.7 billion tons of in-place phosphate concentrate with total sediment grades ranging up to 22.9% P2O5 and adjusted average concentrate grades of 29.8% P2O5. These phosphates are lithologically and chemically similar to phosphates currently being mined in the nearby Aurora phosphate district in North Carolina. Various lithologies of the Pungo River Formation and associated rock units of Oligocene and Quaternary age crop out on the sea floor to form extensive hardbottom habitats that dominate almost 100% of Onslow Bay. A large proportion of these hardbottoms appear to be sea floor deserts, whereas others are virtual oases with rich associations of benthic organisms. These important differences in benthic community structure appear to be greatly influenced by one or more of the following variables: 1) geologic framework (geologic formation, hardbottom composition, morphology, and spatial orientation relative to dominant currents and waves), 2) texture, movement, and accumulation of surface sediments, and 3) flow rates and chemical composition of discharged submarine groundwater.

Jan 1, 1992

By James R. Hein

Low- to intermediate-temperature, diffuse-flow hydrothermal fields and associated mineral precipitates have been found at many locations along oceanic spreading centers, back-arc basin spreading axes, and midplate hot-spots. However, this type of hydrothermal field has not been found in oceanic fracture zones until recently. We mapped and collected samples from an active hydrothermal field in the Blanco Fracture Zone (BFZ) located in the northeast Pacific. The BFZ connects the Gorda and Juan de Fuca spreading centers and is divided into east and west segments by Cascadia Depression, a small spreading center. Small pull-apart basins occur along both the east and west segments. A complex set of basins near the western end of the BFZ includes from east to west, Surveyor Depression, East Blanco Depression (EBD), and West Blanco Depression. The hydrothermal field described here is located in the EBD.

Jan 1, 2001

By Michael Goldin, Jonathan Ladner, Thomas Peacock, Nathaniel Johnson, Patrick Haley, Kris van Nijen, Andrew Rzeznik, Pierre Lermusiaux, Matthew Alford, Carlos Munoz-Royo

Surface processing vessels for deep-sea nodule mining operations will produce dewatering plumes that will be released at some depth into the ocean water column. We are studying all aspects of this part of the nodule mining process. First, we have developed analytical and numerical models to determine the effects of highly non-uniform, realistic stratifications on forced, compressible plumes with finite initial size. The classical plume model is developed to take into account the effects of compressibility and thermal conduction through the dewatering pipe. Our results show how small-scale features of a realistic stratification can have a large effect on a plume, and provide a basis for determining at what depth dewatering plumes can be released. These results form the basis for our PLUMEX field experiments, in which we will study the dynamics of dewatering plumes over the course of one week of field tests from the vessel R/V Sally Ride. The field experiments will use a Remotely Operated Vehicle (ROV) and a Phased-Array Doppler Sonar (PADS) system to study the characteristics of the dewatering plumes. The subsequent transport of the material in the dewatering plume will be monitored via shipboard surveys and, potentially, Autonomous Underwater Vehicle (AUV) operations, and these studies will be integrated with near real-time, data assimilating numerical model predictions. The ultimate goal of this project is to develop a field validated, recommend strategy for the release and monitoring of dewatering plumes, to help inform the development of ISA regulations and the planning of industrial operations.

Jan 1, 2017

By John W. Padan

What is known about manganese nodules and their potential commercial recovery is outlined in terms of economics, legal rights, environmental impacts, and mineral genesis. As a result of 20 years of accomplishments it is clear that nodules comprise a real resource, and that they can be collected in water depths up to 5000 m, for brief periods, and raised to a surface vessel at rates of production appropriate for scale model systems. Based upon information in the public domain at present there is more confidence in the nature and magnitude of the resource than in the ability to recover nodules commercially. A review of the literature suggests that the metallurgical processing of manganese nodules is technically feasible and that the associated costs are well predictable. What is less clear is the market outlook for the products. All "overlapping claim" conflicts have been resolved. Therefore, parties with a historic interest in nodule mining appear now to have the right to mine in the future, assuming they properly complete whatever exploration license obligations they may have.

Jan 1, 1989

By Roger J. Daniel

Major interest and investment in southern Africa's west coast diamond deposits have resulted in the development of various tools for sampling and mining in the varied geological conditions encountered. Namco's project progression from sampling to mining is discussed with particular reference to the ROV technology employed for both phases of the operation. The Namrod sampling tool was mobilised in June 1995 and following extensive sampling resulting in resource definition, detailed research, design, and engineering was undertaken to develop the NamSSol mining system in conjunction with SubSea Offshore Ltd., a Dresser Industries company. Mining operations commenced in early 1998. History of the background to the development leading to design criteria, engineering considerations, operational parameters and discussion of field performance are presented. The innovative systems employed by Namco represent significant developments in a rapidly expanding technological field.

Jan 1, 1998

By Nobuyuki Okamoto

Ferromanganese crusts on the seamounts in the Pacific Ocean are potential resources of cobalt, nickel, platinum and REEs. Particularly, those of the Republic of Marshall Islands and the Federated States of Micronesia (FSM) waters are believed to be of the highest resources potential area in the Pacific Ocean. The total six cruises using the Japanese Research Vessel Hakurei Maru No. 2 were carried out in the seamounts of the Marshall Islands in 1996, 1998 and 2002, and of the FSM in the 1997, 1998 and 2005 for evaluation of economic potential for cobalt-rich ferromanganese crusts as part of the Japan-SOPAC joint project. During these cruises numerous data such as bathymetric, geological, geophysical and environmental data were obtained. Geophysical exploration with backscatter mapping and side scan sonar, visual imaging using towed TV camera and geological sampling using dredge bucket and/or benthic multi-coring system (BMS) were conducted on these seamounts. In this presentation, we will report the mode of distribution of the crusts and calculated resource estimation based on the results of these geological and geophysical shipboard survey and land-based analyses. Keywords: ferromanganese crusts, Marshall Islands, Micronesia, resource potential

Jan 1, 2011

By David A. Clague, James R. Hein, Robert W. Embley, Robert C. Vrijenhoek, Randolph A. Koski

We report preliminary results for a group of unique samples collected with MBARI’s ROV Tiburon on August 12, 2005. The samples were collected from the East Blanco Depression (EBD) diffuse-flow hydrothermal field, which was determined in a previous study to cover an area of at least 100 m by 80 m (Hein et al., 1999). The survey reported on here extends that field to more than 1500 m in an approximately N-S direction. The EBD, a pull-apart basin, occurs near the western end of the Blanco Fracture Zone (BFZ), which connects the Juan de Fuca and Gorda Ridge spreading centers (Fig. 1). The samples were collected from a waterdepth range of 3343-3380 m.

Aug 24, 2006

By Lu Jun

Up to now, much data on marine minerals, as well as on marine geochemistry, have been accumulated. Modem computer databases provide optimum flexibility and power for manipulating these data. The best worldwide marine mineral database is currently the Marine Minerals Bibliography and Geochemical Data Base created by Carla Moore et al. at the National Geophysical Data Center in the United States. In fact, in the course of studying marine minerals and geochemistry we may collect not only digital-character type data but also graph and image (black-white, grey and color image) data types. For instance, correlation diagram between chemical compositions of minerals, spectroscopic graphs, (e.g. infrared spectra, Mossbauer spectra, etc.), grey or color images from both optical and electron micro- scopes (scanning or transmission electron microscopes) as well as seabed photographs. Charles L. Morgan et al. (1993) reported that 10,000 photographs and some video images of the seabed in the Clarion-Clipperton region of the northeastern tropical Pacific have been collected by the Ocean Minerals Company. If both graphic and analytical information were stored in a database, it would be very useful and convenient to marine geologists. This system would not only be able to search for all the data based on one parameter, but also for both size and composition distributions. If possible, geostatistical methods could be combined with fractal dimensional methods. Of course, this would require enormous efforts. Before multimedia technology emerged, it was very difficult to create image databases. The emergence of large-capacity compact discs, high-speed central processing units, and high-speed digital signal processing techniques makes it possible to establish multimedia database management systems (DBMS), image-text DBMS, that involves graphs, text, images, and sound. In order to store image fields in a DBMS, we have to take into account two problems: (1) image access format and (2) image compression code standard.

Jan 1, 1994