Search Documents

One major aim of the operation of Aberfoyle's matte fuming pilot plant was to assess refractories performance in the process working vessel, a SIROSMELT furnace. High wear rates were expected and whether these could be tolerated was an important question. During operations a range of refractory types was evaluated in both insulated and water cooled furnace designs. Furnace operations enabled lining wear measurements to be made. Results confirm that existing technology can solve any expected refractory problems. Design aspects that should be included in commercial furnaces are shown.

Jan 1, 1984

By K Heiskanen

Flotation is affected by several factors, part of which depends on the mineralogical characteristics of the ore and part on process variables. Sulfide Ni-Cu ores occur typically in mafic and ultramafic igneous rocks. Serpentine minerals are also common. As a consequence of metamorphosis, sulfides and secondary minerals may be finely disseminated in an altered ore matrix. The floatability of minerals depends also on process variables. Oxidation of sulfide particles, process iron and dissolved ions in process water affect the behaviour of sulfides. The effects of some essential factors on flotation of Ni-Cu ores are considered.

Jan 1, 2005

By Jin C, Shi X

The studies of pulp electrochemical flotation separation of pyrite and arsenopyrite were made from the thermodynamics, mineral natural oxidation rate, property of mineral surface oxidised material and pulp electrochemical flotation tests. The results showed that although pyrite and arsenopyrite possessed similar thermodynamic stability, significant differences of two minerals were observed in natural oxidation rate, property of surface oxidised material and its influence to dixanthogen formation on the oxidised mineral surface. Based on the non-thermodynamic differences, the pulp electrochemical flotation technology was successfully used to separate arsenopyrite from pyrite in pilot test.

Jan 1, 1993

An Ore Reserves and Exploration System has been under continuous development at Mount Isa Mines Limited since 1970. The task of re-engineering the system has now begun, and the first stage is operational. This paper describes how the application of data base concepts, and table driving techniques has resulted in a design in which the input documents, validation procedures and file data content are redefinable by parameters, thus allowing the system to be tailored to suit varying geological Environments.

Jan 1, 1977

Haematite Recovery from a Tailings Stream Laboratory and pilot scale testing were carried out in 1999 on a tailing sample from a North American iron ore plant using gravity, magnetic and flotation techniques. The ore contained 16 per cent iron mainly in the fine (-38 ¦m) size fraction. Two methods of evaluating the separation efficiency were used; Selectivity Index and Z factor analysis. Tabling and magnetic separation produced poor results, with flotation testing showing some promise, generating concentrates assaying more than 40 per cent Fe. High grade concentrates containing more than 67 per cent Fe were generated using the Kelsey Centrifugal Jig, and it was recommended that this technique be pursued at a larger scale to verify the results obtained.

Sep 13, 2010

There has been a significant increase in exploration and development of mineral wealth in South East Asia over the past five years. This paper describes the foreign investment laws in the region as they relate to the mining industry.

Jan 1, 1993

Indonesia remains relatively unexplored by modern methods. The great expectations created by the rush of companies taking up Contracts of Work over large areas during the epithermal gold/ring-of-fire boom (1985-7) have not been fulfilled. This is not necessarily a reflection on the prospectivity of Indonesia; on the contrary, many of the hopeful companies were,, under-staffed and under-financed to overcome the physical and logistic problems of exploring virgin jungle.After the stock market crash of 19th October, 1987, many of the weaker companies were unable to sustain their programs or to arrange farm-outs, and they have subsequently relinquished their tenements. In some cases, little or no field work has been carried out so that many areas remain untested. This poor performance will ensure much more rigorous scrutiny of future applications by the Indonesian authorities.

Jan 1, 1990

By P Vix

A thermodynamic model of the copper Peirce-Smith (P-S) converter has been developed to predict the behaviour of magnetite in the converter slag, the amounts of slag and matte, the compositions of slag and matte, the volume of the bath, the bath temperature and the SEMTECH OPC signals. The predictions of bath temperature, slag and matte compositions and magnetite content in the slag have been validated by the industrial data. The effects of fluxing strategy, returns and skim charges, oxygen enrichment and temperature on the magnetite formation in the slag have been predicted and discussed. Some industrial applications of this model have been presented.

Jan 1, 2005

By Watson D. F

P S B Stewart has rightly pointed to a possible obscurity in our paper on drilling patterns, viz. in comparing the improvement of a triangular drilling pattern over a square one, we used percentage improvements without always making clear their base. We hope, however, that other readers, like Stewart, have been able to understand the particular meaning from the context.Although different methods of estimation of an ore deposit will have different local bias (Philip and Watson, 1985), the critical relationship affecting the reliability of estimation of an unsampled location is the scale of local variation of the variable being estimated in comparison with the density and isotropy of sampling. This relationship overrides all other considerations.

Jan 1, 1985

By J Zhiming, X Qian

All high stopes and pillars in Anqing Copper Mine were extracted by use of large-diameter longhole mining method. The height of stopes was 120 m. The forced mining was the leading concept that the safe and efficient operation was carried out in this mine, while the mining production was faced with the major technical problems on the stability of both primary ore pillars produced in the first-step stoping of stopes and the cemented fillbody on two sides of stope in the second-step stopping of pillars. Starting with mining technology, the authors emphatically describe the test results obtained in Anqing Copper Mine and make an approach to the deployment prospects and development trend of large-diameter longhole mining technology in China underground metal mines.

Jan 1, 2000

In a coal mine there are many substances capable of ignition under certain circumstances, which can be placed in the following groups: ordinary combustible solids, dusts, liquids and vapours, gases, metals and plastics. There are many factors influencing ignition, including temperature, minimum ignition energy, particle size, explosion pressure level, rate of pressure rise, specific energy content and also explosive limit. Not all are applicable in every case. Frictional ignition of methane is an accident statistic of increasing concern and is considered in some detail. Practical measures that can be taken to reduce the incidence of frictional ignitions are considered, and also possible ways of ignition suppression.

Jan 1, 1981

Sasol Roche Blasting Services (SRBS) and its former owners have been in the process of developing and utilising low-density explosives over the last ten years. Many blasts have been fired in varying strata types in a number of mining operations. This has led to a good understanding of the product and the best methods to exploit its characteristics when designing blasts. Unlike some other low-density products, SoftLOAD« is a homogeneous mix that is easily handled and able to be loaded at high load rates. This paper discusses the physics of SoftLOAD« low-density explosives and how through correct utilisation, blasting outcomes can be significantly improved. It also touches on the various side benefits that can provide the blast designer with a more controlled blast.

Jan 1, 2004

By Davidson JR, Napier-Munn TJ, Kojovic T

A research program was conducted to determine the relationship between operating conditions and medium losses in Mt Newman Mining's Beneficiation Plant. It was found that major medium losses were adherence losses and losses fran the overflow from the water recovery cyclones. Operating density and medium blend were found to have a significant effect on the medium consumption. Viscosity was thought to be the underlying factor. This viscosity problem was overcame by adding dilution water to the cyclone spigot discharge to reduce viscosity. The result was a reduction in medium consumption of 25 percent under normal operating conditions. Keywords:- Heavy Medium, Viscosity, Medium Carposition

Jan 1, 1987

The mineral resources of Hamersley Iron are structurally complex with fluctuations in mineral chemistry. Besides orebody charact- eristics, mineral recovery is also affected by stringent product quality demands from the competititve steel industry. Under such conditions, a geological ore reserve estimate has little meaning because it is unqualified and presupposes the defini- tion of ore. A system was developed in Hamersley - the Mine Planning Technique - to optimise recovery from available resources. This incremental planning method reduces a geological reserve statement into a simple, logical sequence of events. While there are limitations in the method used, the benefits are enormous. Among its' numerous applications, the schedule - the end product of the technique - plays an important role at Management level in decision making and policy formulation on all aspects of resource exploitation.

Jan 1, 1979

An increase in the silver to gold ratio with increase in depth in the main ore shoot of the Crown-Crescent lode in the Emperor gold mine, Fiji, was found to be due mainly to vertical zoning of gold-silver tellurides. The zoning resulted from a two-stage sequence of ore mineralization.The application of some recent studies of the synthetic Au-Ag-Te system to natural gold-silver telluride assemblages is discussed.

Jan 1, 1971

The attachment of a spherical particle to a bubble is theoretically investigated under the condition of a mixed sorption coating of a collector. It is shown that the attachment is determined primarily by the hydrodynamic factor involving the displacement of liquid from the gap between a bubble and a particle. The dependence of the attachment on the state of the surface of particle (sorption coating) is due to a change in the boundary conditions on the interface with water both in the case of surfactant chemical sorption and in that of the physical adsorption of oil. It is demonstrated that at large distances the thinning of a interlayer is facilitated by a physically sorbed collector, while near the bubble this is done by a chemically sorbed one.

Jan 1, 1993

As the gold price, and consequently ore reserves, improved in the late 1970's, a programme of upgrading the gold recovery circuit at the Phoenix treatment plant at Central Norseman was initiated. The introduction of oxidised ore with a high clay content from the North Royal open cut caused a reduction in thickening and filtering capacities, which in turn restricted plant throughput and increased gold losses in the residue solutions. Test work into alternative washing facilities showed that the installation of a five stage counter current decantation system would restore throughput and reduce soluble gold losses. Installation of the system achieved the objectives of increased plant tonnage, increased proportions of the high grade oxidised ore in the mill feed and decreased gold losses in the residue waters.

Jan 1, 1978

By Forssberg KSE

Purification of GAsgruvan Limestone is carried out by anionic, cationic and cationic followed by anionic flotations in order to obtain a calcite concentrate that is acceptable to the paper industry. The results indicate that such a concentrate could be achieved by first carrying out the separation of siliceous gangue minerals by cationic flotation followed by the separation of carbonate during the anionic flotation. Stearylamine acetate (Flotigam SA) and a modified fatty acid (OMC 357) are found to be selective during cationic and anionic flotation, respectively. A final product containing 99.25 per cent calcite with a recovery of around 80 per cent is obtained. It is hoped that these results could be further improved by the follow-up process variable studies, in particular, the effect of reagent dosages and conditioning time at each stage of cationic and anionic flotation steps.

Jan 1, 1993

The Broken Hill (BH) Block contains a wide variety of mineralization, with comrodities including Pb, Ag, Zn, W, Cu, Co and Sn. Much of the mineralization is stratigraphically controlled. Fe, Cu and Co-rich mineralization is dcminant in the Thackaringa Group; Pb, Ag, Zn and W is dcminant in the BH Group and Sn mineralization is present above the BH Group. Some mineralization occurs as concordant syngenetic deposits, but other types have been partly or completely remobilized by metamorphism, magmatic activity or hydrothermal fluids. Almost all of the non-syngenetic mineralization, including stratabound, vein and intrusive-related types, has formed from the "recycling" (remobilization and redeposition) of metals originally deposited with the sediments and volcanics of the Willyama Supergroup.

Jan 1, 1983

The Filblast Cyanidation Process incorporating intense high shear mixing, high gas mass transfer efficiency and high oxygen concentrations under conditions of elevated pressure has now been been successfully applied in gold cyanidation mills since May 1993. The first commercial unit had a slurry capacity of 110 cubic metres per hour. Since then 230 and 450 cubic metre per hour units have been installed and a 1000 cubic metre per hour unit has been designed. Laboratory and pilot plant Filblasts have also been built.The reactor is a robust, compact in-line or end-of-line device and may be constructed out of a wide range of materials including wear and corrosion resistant alloys and ceramics. The Filblast Process may be applied to high temperature leaching of refractory gold ores and base metal concentrates.

Jan 1, 1997