Search Documents

Jan 1, 1991

Jan 1, 1953

Jan 1, 1927

[Adams, Douglas K General Electric Co., P.O. Box 2331, Denver 1, Colo. Adams, Frank E U.S. Steel, 919 Kearns Bldg., Salt Lake City, Utah Alger, Van Kaiser Steel, Sunnyside, Utah Allan, Andrew Thompson Creek Coal & Coke Corp., Glenwood Springs, Colo. Allen, Earl W Mine Safety Appliances Co., 257 Rio Grand St., Salt Lake City, Utah Allen, Thomas Chief State Coal Mine Inspector, State Services Bldg., Denver, Colo. Anderson, Nephi W :Book Cliffs Coal Co., Dragerton, Utah Anderson, W. J Texaco, Inc., 845 N. 5th E., Price, Utah Ankeny, Marling J U. S. Bureau of Mines, 5308 Roosevelt St., Bethesda, Md. Arentzen, E. M Lee-Norse Co., Charleroi, Pa. Arentzen, L. E Lee-Norse Co., 2975 18th St., Boulder, Colo:]

Jan 1, 1961

By Kraig R. Naasz

Jan 1, 2008

Jan 1, 1987

Article I1 of the RMCMI Bylaws reads: Section 1. Classes. The membership of the corporation shall be divided into three classs, consisting of active members, life members and senior members, who shall have such rights, privileges and qualifications as these bylaws may provide. The names of all active, life and senior members, together with current mailing addresses, follow. [Lt. Jay Abbott M. L. FOSS Co. 7458 S Jackson St Littleton. CO 80122 Lt. Ronald H. Achziger Midwest Rbr & Sply Co 6404 E 39th Are Denver, CO 80207 ]

Jan 1, 1986

[CURTIS M. BELDEN RMCMI PRESIDENT 1999-2000 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 96th Regular Meeting and Convention to be held June 25 thru June 27,2000 Durango, Colorado]

Jan 1, 1999

Jan 1, 1935

Jan 1, 1941

By Paul A. Lang

Jan 1, 2007

Jan 1, 1970

By Eli Follett

It is indeed gratifying to note the marked improvement in the methods used in the coal- mines today compared to the methods in earlier days. Away back in the decade of 1900 to 1910 many of the mines were conspicuous for their absence of sprinkling and humidifying systems, as a result much of the natural moisture was absorbed by the dry air current and carried out of the mine and the mine was left dry, dusty and dangerous. This dangerous condition was intensified by large accumulations of fine coal dust on the haulageways where fire flashed from poorly lubricated rollers and bullwheels-trip riders used a torch with a flame reaching to the back of their necks, and large supplies of blasting powder were kept in the mines. Accidents and disasters were very frequent as we, in our ignorance flirted with danger. Staggered by the numerous accidents, and the nature of them; men began thinking along lines of safety, they worked out schemes and after many disappointments succeeded in having, some very whole some legislation enacted covering coal mining operations only to find that much lawlessness was still being practiced by the miners whom they sought to protect; step by step these safety men forged ahead, enlisting the co-operation of a few men about the mine whom they called a safety committee, until, today, we have an ironclad mining law which all have to respect. We have sprinkling and humidifying systems, the miners electric lamp, permissible explosives and many other devices making for greater safety in the operation of our coal mines. Our mines are no longer veritable gasometers and powder storehouses, as I. knew them to be in South Wales, Britain, where I started to work in the mines. Instead, the mines of this day are healthy, well lighted and ventilated workshops and too much cannot be said in the praise of safety engineers who, fought altruistically in their efforts to bring about the wonderfully improved conditions in the coal mines of this day. While the possibility of a mine fire starting, in these days of scientific mining, is remote every one admits there still exists a possibility and to deal with a fire, should one start, most coal miners are equipped with fire extinguishers. Extinguishers of all designs conceivable are on the market, the different extinguishers are charged with different chemical substances, Some are charged with patented chemicals and others with baking soda and sulphuric acid and so on, however, many of them are equipped with about eighteen inches of rubber hose and bear the conventional "FOR FIRE-TURN UPSIDE DOWN" but nothing is said to indicate how close it may be necessary to take the extinguisher to the fire before doing the "TURN UPSIDE DOWN" act, neither is anything said as to what effect the contents may have upon the' hands, face or body of operator should he come in contact with the liquid, nor is any warning given as to the dangers in the fumes which may come from the contents of the extinguisher in contact with the fire.

Jan 1, 1922

By J. H. Emrick

When I was asked to read a paper to you, I wondered what idea I could bring before you which would be interesting and which would be helpful in your work in operating coal mines. The Institute has been studying ways and means of increasing the safety and efficiency of mine operations. Almost every subject along this line has been discussed from time to time. In thinking the matter over it occurred to me that there was one thing used by practically all coal mining companies in considerably large quantities and which in many cases does not receive the attention it should. It is the cutter bit placed in the cutter chains on coal mining machines. Coal mining machines have been repeatedly improved during the last twenty-five years until their efficiency and convenience have reached a high level. The generating units making electrical power to operate them also have been developed to a similar degree. This machinery has been in- stalled at a great expense to coal mining companies and the installation made for the sole purpose of pulling coal cutter bits through coal. Why not then give these cutter bits some attention so as to see that they do their work as efficiently as their driving and propelling units? The consideration of this question easily divides itself into three principal parts-First, the kina of steel out of which to make the bit; Second, the proper form or shape to give it; and Third, the tempering of the bit. Let us discuss them in that order. There have been tried at different times' various grades of steel for cutter bit uses. The cheaper steels, having a very low carbon content (.10 to .30 per cent carbon) have proved un- satisfactory because such steel cannot be tempered so as to produce a satisfactory cutting tool. Because of the low carbon content, it cannot be hardened to retain its cutting edge. It dulls quickly, bends easily on striking any hard obstruction in the coal, and so requires constant resetting to its original form. The high priced alloy steels when properly shaped and tempered will give a bit that would make a clean, even cut in the coal if no impurities were encountered. Such a condition is rarely found. Alloy steel is quite brittle and on striking impurities, such as sulphur balls or a sand spar, is readily broken and so the loss of material through these broken bits and the high price paid for it more than offset all the other advantages which this steel has shown in cutting. Experience has shown that steel having approximately .70 per cent carbon and from .25 to .35 per cent manganese will give the most economical results. Some mines have obtained better results by using a steel of slightly higher carbon content and in some cases a grade of tool steel has been used. The disadvantage of using a steel having too much carbon is that it can easily be spoiled in the black- smith shop by overheating. Steels having a carbon content of about .70 per cent have a sufficiently wide range of temperatures at which they can be forged and hardened so that with ordinary care and attention they are not likely to be burned. Steel of this quality, therefore, has been found to be the most practicable because of its reasonable cost, ease in working and tempering and general durability. In the early days of mining machines, comparatively few bits were used because each machine required but a few bits because there were but

Jan 1, 1925

Jan 1, 1951

Jan 1, 1990

MR. GERALD ALLEY (C 11 i e f Draftsman, C. F. & I. Co.) : This invention is primarily intended to correct anything that goes wrong with the fan and any conditions in your air current underground which do not produce a change in your fan water gauge

Jan 1, 1925

Past President, A. Z. Dimitroff, Supervising Mining Health and Safety Engineer, Health and Safety, District H., U. S. Bureau of Mines, Denver, Colorado, opened the Fifty-eighth Annual Meeting of the Rocky Mountain Coal Mining Institute at the Hotel Colorado in Glenwood Springs, Colorado, at 10:30 a.m. His introduction of President Charles M. "Dock" Schloss follows: It is indeed a pleasure to call the meeting to order and to welcome you to this, the 58th regular meeting of the Institute. This morning I have the pleasant assignment of presenting to you a person who has been so active in the Institute, and has worked so closely with many of you, that I am sure most of you have known him much longer than I have.

Jan 1, 1962

CLARK MOSELEY RMCMI PRESIDENT 1998-1999 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 95th Regular Meeting and Convention to be held June 27 thru June 29, 1999 Crested Butte, Colorado

Jan 1, 1998

Jan 1, 2005