Search Documents

Jan 1, 1973

[ ]

Jan 1, 2000

Jan 1, 1950

Jan 1, 1947

PRESIDENT LITTLEJOHN: Before we open the discussion on the Utah mining laws, I want to bring out what I consider a slight misunderstanding on some of the things that I said this forenoon relative to our comparison of accidents. I did not mean to infer that we, as mine officials, are satisfied we have done the best we can to eliminate the accidents, when I was talking about a four-to- one comparison. I do not want any- one to get the idea in their heads that I do not think we are doing all we can. There is not any of us who can state that, even if we better these figures. It is the general understanding that these figures are based upon ratios per thousand man shifts and not upon the tonnage basis that we use. If it were based upon a tonnage basis, I think the figures would be pretty nearly reversed, for we are producing from two to four tons more per man than they do in Great Britain. The discussion will now be continued as I said this morning. There is a gentleman in the audience here that is as guilty of making these laws as I was, and I am quite sure when speaking he will confine himself to the subject of Utah Mining Laws and the prospective results. Before Mr. Monay starts with his paper, I want it understood that this discussion must be finished by 2:30 for the reason that we have still quite a lot of business before us this afternoon.

Jan 1, 1925

President Ziolkowski called the meeting to order at 9:30 a.m. He called on the Auditing Committee to give its report. Jack Leech read the report and asked that it be approved. A motion was made, seconded and approved. The Resolution Committee was asked to give its report. The following was submitted: (1) RESOLVED, WHEREAS, in the year since the last convention of The Rocky Mountain Coal Mining Institute, the Institute and the Coal Mining Industry have suffered the loss through death of the services of the following: James A. Flint John L. Paynich Joseph E. Ward NOW, THEREFORE, BE IT RESOLVED, that there be spread upon the minutes of The Rocky Mountain Coal Mining Institute recognition of the passing of these members, who have so greatly contributed to the advancement of the industry, both nationally and in the Rocky Mountain area, and that a copy of this resolution be sent to the next of kin as evidence of the sincere regard and sympathy of the members of the Institute.

Jan 1, 1981

Jan 1, 1927

By J. M. Shafer

Jan 1, 2005

[Mr. Houston T. Aars Carter Mining Co PO8 3007 Gillette, WY 82716 Mr. Jay Abbott Union Supply Co 7458 S Jackson St Littleton. CO 80122 Mr. Ronald H. Achziger Midwest Rbr & Sply Co 6404 E 39th Ave Denver, CO 80207 Mr. Randy Acre Dorchester Coal Co 9350 E Arapahoe Rd Englewood, CO 80112]

Jan 1, 1983

Cautionary Note about Forward-Looking Statements Certain statements made by us in this presentation that are not historical facts or that relate to our future plans, expectations, events or performance are forward-looking statements within the meaning of the federal securities laws. Our actual results may differ materially from those expressed in any forward-looking statements made by us. Forward-looking statements involve a number of risks and uncertainties including, but not limited to, the risks described under the heading ?Risk Factors? in the Prospectus Supplement. All forward-looking statements are qualified by these risks and uncertainties. We undertake no obligation to update the information contained in any forward-looking statements unless required by law. All statements made by us in this presentation are further qualified in all respects by the information disclosed in the Prospectus.

Jan 1, 2007

Jan 1, 1971

Outline ? Overview ? Existing Operations ? Mine Planning ? Future Trends ? Market Impacts ? Conclusions

Jan 1, 2006

Jan 1, 1971

Jan 1, 1960

Jan 1, 1972

PRESIDENT WETZEL: Gentlemen, the fortieth regular meeting of the Rocky Mountain Coal Mining Institute will now come to order. It is my pleasure to present Mr. William Fealey, who will introduce the first speaker. WILLIAM A. FEALEY (Bethlehem Steel Company, Salt Lake City, Utah): Mr. Wetzel and Gentlemen of-the Rocky Mountain Coal Mining Institute: The Governor of the State of Utah was sup- posed to be here this morning, but he heard Bracken Lee was in town and he took a runout powder. So without any further ado, I am just going to present the Mayor of Price, Utah, who is perhaps better known to all of you than anybody else. Mayor Bracken Lee.

Jan 1, 1942

Jan 1, 1942

Jan 1, 1969

Briefly, the machine consists of a steel frame mounted on roller bearing wheels and axles, an electric motor, a fully enclosed speed reduction gear unit, a specially designed centrifugal pump driven through a friction clutch and silent chain, a mixture tank and agitators, and all necessary operating and control mechanism. The wheels are mounted on solid roller bearings made of special roller bearing steel, and are cast with deep chilled threads. The axles are of high carbon axle steel. A General Electric Company motor, of special design to exclude dirt and moisture, is used. It has an unusual overload capacity and a maximum torque at starting speed. Special arrangement can be also made for storage battery operation. The motor drives from one end, through a flexible coupling, to the speed reduction unit, and from the opposite end, through a similar coupling, to the pump clutch. The design of the flexible couplings is such that the drive is reversible. The speed reduction gears are enclosed in an oil and dust proof housing. All spur gears, as well as the main drive clutch, are made of steel forgings, with accurately cut teeth. An aluminum bronze worm wheel and special heat treated alloy steel worm provide the speed reduction for the traction drive. The worm shaft is mounted on Hyatt roller bearings and the thrust is taken in each direction by ball thrust bearings. The main drive shafts are of special alloy steel and operate in Hyatt roller bearings. The slow speed shafts run in extra large bronze bushings. Ample and constant lubrication is provided by splash from the gears running in oil. The Mudite pump is of special de- sign. A renewable wearing plate protects the pump casing from the natural wear of the mixture. The open runner is mounted on an extra large shaft which runs in a Hyatt roller bearing on the pump end and in Timken roller bearings on the outboard end. A special cage prevents water and grit from reaching the pump bearing. All thrust from the runner is taken on the Tim- ken bearings and these bearings also provide for the accurate and easy adjustment of the runner. The pump is driven by a silent chain, which operates on cut steel sprockets, from a friction clutch. The clutch is designed to secure long wearing qualities with minimum attention and its adjustment is easily effected. It is mounted on Hyatt roller bearings and the clutch drive shaft also runs in the same type of bearings. The pump discharges through a nozzle, which is adjustable, and controlled by the operator. The mixture tank is of approximately 650 gallons capacity. It is provided with a mixing well constructed of perforated plate screen to prevent large hard particles from getting into the valve or pump. The tank is filled through an opening in the top directly into the mixing well. On a shaft running longitudinally through the tank are arms so arranged that the mixture is thoroughly mixed and kept in continuous circulation from end to end. This shaft is driven from the speed reduction unit by a steel roller chain operating on cut sprockets. The traction drive is taken from the worm wheel shaft through steel roller chains of extra large size that run on cut steel split sprockets on both axles. An idler sprocket provides for easy chain adjustment. The axles are mounted in solid roller bearings in fully-enclosed dust proof housings, which support the frame through coil springs. These springs eliminate twisting strains on the frame on account of track irregularities and also relieve the working mechanism from road shocks. The speed reduction from the motor to the wheels is such that it gives an operating speed of approximately ninety to one hundred thirty feet per minute. The brakes are of the conventional shoe type and engage the wheels on both axles. They are operated by a hand wheel conveniently located and

Jan 1, 1925

Jan 1, 1980