Search Documents

By J Palaci, M MelTndez, F Parra, I Rojas

At the Huasco Pellet Plant of Compa±fa de Aceros del Pacffico, Chile, the production of iron concentrate suitable for pellet feed from a low-grade iron ore was technically evaluated. In this study, three treating schemes including comminution, magnetic concentration and flotation in pneumatic cells were tested. The best results were obtained at the laboratory scale by flotation technique using Lilaflot D 817 M as the collector without using any depressant. The operational parameters were determined including pneumatic flotation, and three circuits, two including magnetic pre-concentration, with the low-grade iron ore. The best results were obtained by size reduction at 80 per cent under 325 Tyler mesh, three steps of magnetic concentration and three steps of flotation in pneumatic cells. The magnetic concentrate contained 63.02 per cent of iron and 6.6 per cent of silica, and after the pneumatic flotation the iron content increased up to 70.18 per cent and silica decreases to 1.07 per cent with 78.78 per cent of iron recovery at a weight recovery of 31.89 per cent. Therefore, it is possible to use low-grade iron ore to produce pellet feed from magnetic concentrates by using reverse iron flotation in pneumatic cells.

Jan 1, 2005

By P G. Fuller

The Woodlawn Mine near Canberra faced the challenge of poor ground conditions from the commencement of underground operations 1987. Talcose shears bounded the dense massive sulphides on both the hangingwall and footwall side of the orebody. In another area the talc existed not only on the edges of the orebody but through out it as well. The country rock was relatively weak shales compounded by a low stress environment that allowed the wall rocks to fall apart quite easily. The challenge for the operators was to overcome the poor ground conditions. This was done by attacking the problem from three directions:technology, how technology is applied, human relations and leadership by all levels of the Management team, and by ensuring that these processes meshed together well.Woodlawn in it early days as an underground mine enlisted the assistance of BFP (Formerly Barrett Fuller and Partners) as a second set of eyes to assist with the assessment of the ground control procedures. The results are discussed in this paper. The progression to this end result included:non-contract payment systems; ground control training for the full range of mining personnel; the development and enhancement of cable bolting and shotcreting equipment; the development of Practical Standard Work Procedures by mine operators; and innovative use of shotcrete and cables bolts to control extremely poor ground conditions.

Jan 1, 1998

By M Noy, P Hawkes

Improvements in the drill and blast process can impact on loader performance in a number of ways. The main effects being improved loading cycle times, less non-productive cycles such as oversize removal, clean-up and face raking and better bucket fill factors. The impact of improved loading cycle times on the overall cost and productivity of the load and haul cycle is very much dependent on the loader truck match and the management of the haul fleet. Previous work has shown that a 20 per cent improvement in dig cycle times may only lead to three per cent or less improvement in the overall productivity of the load and haul process. However, improving the mass loaded per pass by five per cent will lead to a five per cent improvement in productivity for any given haul fleet situation, assuming sufficient truck capacity. Work by Orica Explosives at Lab ChrysotileÆs Thetford Mine, Quebec, Canada showed a relationship between muckpile fragmentation and truck payload. With this in mind, work was carried out to determine the effect differing muckpile fragmentation distributions can have on excavator bucket fill factors. This work was performed in the laboratory to a 1:100 scale. Nine different distributions were used. These were characterised by the Rosin Rammler parameters, xc the characteristic size, and n, the uniformity index. The values of xc and n used were modelled on those previously measured at a Sydney quarry. For the range of distributions measured, it was found that the fill factors were lowest at a low characteristic size and a high uniformity index and highest at a high characteristic size and a low uniformity index. In other words the best fill factors were achieved with a more dispersed muckpile distribution with a larger characteristic size. The difference in fill factors was 16 per cent indicating that controlling the drill and blast process to produce a specific muckpile distribution can have a significant impact on the overall cost-efficiency and productivity of the load and haul process. Field measurement by Orica Explosives at a quarry in Canada supports this conclusion showing improvements of up to seven per cent in average bucket load by either increasing the characteristic size or decreasing the uniformity index of the muckpile.

Jan 1, 1999

By Gabriella Mendez

Worthy of note in Miss Bailey's paper are her comments on the attitudes of mining companies and their managers where women were employed, she says, "..another possible pitfall is reverse discrimination where in an effort to avoid being branded as having shown a person favouritism, supervisors end up treating the person in a manner much less than they deserve. This is manifested in denying an employee such things as challenging work, educational opportunities, promotions, or in the case of staff, fair merit increases." and further she says, "It has been observed that the treatment of women in non-traditional roles such as mining is different than for men in the same environment. There are people who treat women worse and some who treat them better simply because they are of the other sex." These statements may sound unjustified to today's audience, and whilst we need to credit pioneering women with having tolerated, understood and worked towards improving the mining culture, the move towards total inclusion of women in the workplace is still growing.

Jan 1, 1995

The sampling of a run-of-mine (ROM) ore with the objective of controlling the fundamental variance associated with the sampling step is a poorly understood subject. Finding the effective sampling constant by repetitive sampling to establish the variance between nominally identical subsamples of a given mass of the ore is a laborious, time-consuming and very expensive exercise. In this paper, the run-of-mine ore is modelled using three components: ore, waste, and relatively fine material which shows significant liberation of the mineral phase(s) carrying the target analyte. The expression for the sampling constant of the mixture is developed from first principles. The form of the equation provides insight into the factors that are important in controlling the magnitude of the sampling constant and hence the fundamental uncertainty associated with a given mass of sample. The controlling factors are shown to be the size distribution of the ore/waste mixture, the proportion of waste mixed with the ore and the extent of liberation and the size distribution of the liberated material in the finer fractions.

Jan 1, 2008

The ore body being worked is about one hundred feet in length by seventy feet in width. A face of about fifteen feet is stoped over the whole level at one operation, this height standing without any timber.Double lines of logs, twenty feet in length and from ten inches to one foot in thickness at the small end, are then laid longitudinally, butt to butt, and breaking joint from end to end of the ore body they are at ten feet centres from wall to wall. The starting logs are single for the first ten feet and their ends are hitched into the solid rock. These are called "miners" and are the logs which are picked up as the level underneath is worked up. The double layer gives a better chance of picking up. Logs are now laid from the centre of the ore body at right angles to the miners, the ends being hitched into the walls. A space, seven feet wide, is left open right through the centre of the ore body...

Jan 1, 1904

Milling Practices Ore is direct tipped into a gyratory crusher and crushed to minus 209mm and fed to stockpiles for the blending of grade into the mills. Secondary and tertiary crushing reduces the mill feed to minus 12mm. Mill feed is a blend of breccia and porphyry ore into two primary mills with the overflow to a regrind mill and then into the leach tanks, followed by a conventional counter current carbon in leach circuit. Underflow from the cyclones feeds back into the primary mills for additional grind. An unusual feature of the Mt Leyshon milling circuit is a desire to produce scatts. The scatt by product is the polished base rock of the Mt Leyshon Breccia clast and contains little grade. These scatts are produced because of the additional time and energy required to produce a proportionally small quantity of gold. The residence of these scatts in the mills decreases the mill feed rate. Scatts account for twenty percent of the mill feed and are screened from the discharge of the primary mills.

Jan 1, 1990

Australia's gold mining industry has seen a resurgence in the past seven years - a resurgence the likes of which has been seen in very few, if any of this nation's other mineral industries. Industry experts are predicting that Australia could become one of the world's largest gold producers as the future of the South African gold industry looks increasingly tenuous under the present political crisis in that country. Therefore, it is utterly ludicrous for the Federal Government to introduce a tax which will see the Australian gold industry "wither on the vine."The Queensland State Government is utterly opposed to a tax on gold. Anyone in their right mind, who has seen the statistics could only agree with our stance. In 1984/85, activity in the gold mining industry is estimated to have accounted for over $750 million in national income, over$1,200 million in national output, and tax revenue of at least $115 million as well as providing more than 16,000 jobs. Chartered accountants Coopers and Lybrand's survey on the gold industry last year showed an increase in exploration expenditure by gold producers and explorers by up to 36% in 1986 from 1985 levels. That level is expected to be maintained in real terms for most of the remainder of the decade under the present tax arrangements. This is in contrast with the mining sector as a whole, where a recent Australian Mining Industry Council survey forecasted a 14% FALL in production.

Jan 1, 1986

By U Dzharlkaganov, B Bekmurzayevand M

The principle conception is presented of timely planning of winning operations in complex-structural blocks and faces in week-24-hourly regime. For adequate description of complex interconnections of open cast operation in space and in time and solving of optimisation problems in timely regime it is necessary using of complex logical and calculation procedures.

Jan 1, 2003

In February 1974 a continuous synthetic polymer dosing plant was installed at Hamersley Iron Pty. Limited's Pellet Plant at Dampier. The polymer, supplied in a liquid sus- pension, is used to improve the drying characteristics of green pellets. 'Three years of test work were involved in the development of the use of polymers. Polymer is continuously dosed to the balling spray water system at a rate determined by the flow of spray water to the discs. Problems have been experienced with handling the polymer in 44 gallon drums, the increased viscosity of the spray water, disc overloads, increased bed strength and increased "stickiness" of pellet fines.

Jan 1, 1974

By T Harrington, M Cox

There have been many changes in the Australian mining industry during the last 30 years. One of the most dramatic changes, from a geological perspective, is the reduction of in-house geological staffing and an ever increasing reliance on contract and consulting services. As a result, there has been a change in the way geological information is generated, managed and retained within the industry. This paper describes the changes that have taken place in the industry, provides two case studies of how companies manage their geological Intellectual Property and reviews some of the issues associated with management of in-house and outsourced geology services.

Jan 1, 2009

Utah Development Company began prospecting for coking coal in 1961 and Blackwater Mine became a reality in June 1967. Exploratory and develop- ment drilling has been a continuing effort and reserves have been assessed at several stages. Some of the history of exploration and reserves assessment is given and practices in drilling, sampling and testing are described, particularly in regard to objectives of drilling and reserves estimation. The current methods for calculation of reserves are described and some comment is made regarding use of the data in mine blending control and plant operation including correla- tion of results.

Jan 1, 1979

Spectacular high-temperature hot springs (æblack smokersÆ) on the deep ocean floor are producing economic concentrations of base and precious metals. Mining these seafloor massive sulfide (SMS) deposits is about to become a reality in 2010, subject to the timely issuance of permits. Three Australia-based private companies and two government agencies inJapan and Korea have exploration licenses or applications covering vast areas of the seabed in the western Pacific targeting SMS deposits. Technological and financial challenges for recovery of seafloor sulfide deposits are being met and mining these may be less environmentally deleterious than mining on land. An EXTENDED ABSTRACT is available for download. A full-length paper was not prepared for this presentation.

Jan 1, 2008

When preparing an appraisal, valuation or feasibility study for a new mining project it is difficult to imagine the technical, economic, social and environmental context that the project will occupy in ten or 15 years time. This paper is about our ability to foresee the future, the choices available now in matching the project to that future context, and about the flexibility that exists in adapting the project to a changing environment. The author draws upon his experience of project reviews, valuations and feasibility studies in the mid to late 1980s in Australia and New Zealand to explore how the project context has changed since key decisions were made and what this tells us about decisions made today for future projects.

Jan 1, 2004

By Chen J, Sun ZY

The present paper gives the design of a new HGMS for magnetic separation of sulphides. The main characteristics of this HGMS are using iron-cladding saddle-shaped magnetic coil for instead of the ordinary magnet, and combining reciprocal-linear motion with vibration to actuate the separation box, and the magnetic field intensity is high up to 2T as well. For improving the magnet system design, a modified finite element method is used to calculate the distribution of magnetic field intensity of separation space of the magnetic coil, and accordingly the calculation results the magnetic leakage coefficient can be determined easily, thus designers apart from the empirical way. KEYWORDS: HGMS, reciprocal motion and vibration, finte element method, saddle-shaped coil.

Jan 1, 1993

By J Morton

There are many avenues for potential liability facing the Mining Industry today. Liability for breaches of environmental statutes such as the Resource Management Act 1991 and the Hazardous Substances and New Organisms Act 1997 include not only financial penalties but imprisonment and perhaps even more significantly will affect the reputation of the Industry. The potential for liability is not restricted to the employees that cause the actÆs to which liability attaches, but also potentially affects all the levels of management and even the company itself. There is also potential for liability through common law actions which can be utilised in cases of environmental harm. These should not be ignored by the Mining Industry. The Mining Industry must take a proactive approach to minimise exposure to potential environmental liability. This can be achieved by undertaking comprehensive environmental management initiatives and policies.

Jan 1, 2005

The word "mine" means different things to different people. To a professional in the mining industry, it may mean trucks and shovels, overburden dumps, headframes, mill buildings, and the other conventional nuts and bolts that constitute an operating mine. To an environmental- ist it may mean bulldozed trees and tailings dams. To a mining engineer who has spent a significant proportion of his career in mine and prospect evaluation, it can mean a hole in the ground with a liar at the top. The liar in this case is frequently not so through design but through ignorance. The purpose of this paper is to contribute in a small way to en- lightening that ignorance. In doing so, it will foster more effective deployment of the pool of risk capital available to the industry.

Jan 1, 1982

By Hall ST, Miles NJ

Recently an inorganic salt, sodium polytungstate (SPT), has become available that allows the preparation of non-toxic solutions of relative densities up to 3.1. It is relatively expensive and at the higher relative densities achievable, highly viscous. Alternative inorganic compounds may in the future be identified that overcome these limitations. The Australian Mineral Industries Research Association Ltd (AMIRA) has initiated a project to examine possible alternatives. However, it has been found that by the addition of finely divided ferrosilicon to solutions of SPT, relative densities of up to 4.0 can be achieved. A laboratory technique for density fractionation of sized mineral samples utilising this finding has been developed. This is currently being extended to study the potential applications of such liquids and suspensions in dynamic systems for mineral, coal and recycled waste separations.

Jan 1, 1993

This paper will present a series of examples drawn for a number of Australian and international mining companies showing their recent attempts at optimisation of capital. The results will be compared, contrasted and discussed in the light of six factors that are considered crucial to any analysis of this subject. The factors are: ò the market availability of capital ò the corporate strategy and performance ò the capital structure appropriate to the corporate positioning within the industry ò the parties to the optimisation equation ò the measurement of success of optimisation The factors above are not mutually exclusive and are generally interdependent so their order above is of little consequence. Other papers presented at this conference will dwell in more depth on all these factors, therefore this paper shall focus only on the key elements of each factor. By way of summary this paper will also address the issue of the longevity of optimisation - is it temporary or long term.

Jan 1, 1991

Australian mining practice operates at the forefront of technology. In recent times Australian designers, contractors and operators have shown many examples of technical "entrepreneurship" in solving geological mining and metallurgical problems. Developments have occurred in the fields of equipment, processing, operating techniques and training which have relevance to the mining industry in other countries. Our mineral exports play a key role in main- taining the viability of the Australian economy. Although the export potential of our specialised equipment and technology is at a much lower level it is a growth area. The export of our mining technology can continue to be basically the result of individual efforts but the question of whether it would be war- ranted and desirable, to establish a coordinating structure should be examined. Existing and new initiatives by the Federal Government indi- cate the Government's interest in the export of technology. The mining industry should take a proactive role formulating policy and programs within its technical jurisdiction.

Jan 1, 1988