Search Documents

By Sung-Hyun Park

Core sediment samples collected from the KODOS area of the Clarion-Clipperton Fracture Zone in the NE Equatorial Pacific were analyzed for chemical and mineralogical compositions to investigate the depth- and time-related variation of paleoenvironmental and paleoceanographic conditions during their deposition. These core sediments are divided into three layers from top to bottom by its color; 1) brown layer (Unit I), 2) pale brown layer (Unit II), and 3) black brown layer (Unit III). Geochronology of 10Be indicated the depositional age of Quaternary for Units I and II and of late Pliocene for Unit III with a potential short hiatus between them. Analyses of interelemental correlation identified three major groups of elemental groups that show moderate-to-strong correlations: 1) Al, Ti, K, and Fe representing for terrestrial alumino-silicate fraction of sediments, 2) Ca, P, REEs, Cu, and Zn for biogenic apatite, and 3) Mn, Ni, and Co for hydrogenous Mn-oxide. With an exception, Fe content was very high and showed fair correlations with Mn, Ni, and Co in Unit III. Unit III shows high smectite but low quartz and illite contents compared to the overlying two units, indicative of reduced supply of terrestrial materials. In a meanwhile, major elements (Fe2O3, CaO, P2O5), minor elements (Cu, Zn) and REEs are highly enriched in Unit III compared to the upper two units. All these elements other than Fe reflect the fraction of biogenic apatite, which indicates higher fraction of biogenic components in Unit III. This is also supported by higher amount of smectite formed by the consumption of siliceous biogenic components. The reduced supply of terrestrial material and/or increased productivity of surface water at the time of Unit III deposition are attributed to Pliocene warming preceding Northern-pole glaciation during Quaternary. Unit III also includes clinoptilolite and unidentified 8Å mineral, likely amphibole, that are absent in Units I and II, suggestive of the possibility of different source region and/or materials during Pliocene. Higher contents of Mn and Fe in Unit III are likely due to the high fraction of Mn-oxide that was formed by diagenetic process after deposition.

Jan 1, 2003

By Dorothy B. Niell, O&apos

In its first three years of operations, the in-house programs of the continental Shelf Division of the Marine Minerals Technology Center (MMTC/CSD) have focused on the development of drill systems - technology and the improvement of techniques and applications of reconnaissance methods to marine mineral deposit characterization. Many of the technological advances made to date have been in direct response to specific requests from industry for drill systems needs, and from federal and state agencies seeking technical support for various research efforts. These cooperative programs have proven to be an extremely efficient and effective way for the MMTC to achieve some of the main program goals that were established for the organization at the outset: primarily, to encourage and assist U.S. industry in marine minerals research activities and to encourage cooperative work among research institutions, government agencies, and industry. The primary achievements of the MMTC/CSD to date include the development of the Remote Placer Drill System for rapid reconnaissance drilling of precious metal placer deposits (including both pneumatic prototype and hydraulic production

Jan 1, 1991

By Dallas L. Peck

The U.S. Geological Survey (USGS) recently completed phase 1 of a mapping effort that makes the United States the first nation to systematically acquire image maps of its underwater lands. In 1984, the USGS, as part of its mission to map and characterize the resources of the Federal lands, began a mapping effort in the newly proclaimed Exclusive Economic Zone (EEZ). The goal was to provide sonar image maps of this frontier area within 10 years. The mapping program is on schedule, with two-thirds of the EEZ sea floor, approximately 2 million square nautical miles, happed in 7 years. The deep water EEZ (depth greater than 200 m) around the 50 states is now complete except for the North Slope of Alaska, where ice precludes our surveying with a surface ship. Phase 2 of the EEZ mapping effort will begin in 1994, focusing on the American Flag islands of the western Pacific. Approximately 1 million square nautical miles of sea floor remain to be mapped around the islands.

Jan 1, 1992

By Yanis Miezitis, Gerald Mueller, Timothy F. McConachy, Ronald G. Sait, Keith R. Porritt, William J. McKay

In November 2004, Australia lodged with the United Nations Commission on the Limits of the Continental Shelf possible new maritime boundaries in relation to Australia’s continental shelf extending beyond 200 nautical miles from the Territorial Sea Baseline (Colwell and Symonds, 2005). If agreed by the commission, just over half of Australia’s land mass will lie below the sea, and Australia will have one of the largest marine jurisdictions in the world (14.41 million km2). With this jurisdiction comes a responsibility to manage and sustain the marine environment (McConachy, 2006). Knowledge of minerals and their resource potential is part of this responsibility but is generally poorly known (McConachy, 2005).

Aug 24, 2006

By David Gwyther

There is increasing recognition that in order for a development project to proceed successfully, it must first obtain a ?social licence to operate? from concerned stakeholders. Obtaining this ?licence? is in many ways a separate process to the legal one which involves, among other things, submitting an environmental and social impact assessment (ESIA) to the appropriate regulatory authority for review. Essentially, the function of an ESIA is to present a project?s technical, financial and social benefits, together with its environmental and social impacts in a transparent way to enable regulators to make an informed decision about whether the benefits outweigh the impacts, and thus whether or not the proposed project should proceed. The focus in the early days of ESIAs was primarily technical and was aimed to answer two fundamental questions: ?Can the project be built?? and ?Can we minimise impacts to a level that is acceptable to the community?? Basically, the ESIA process was a technical test of competence, but more recently, ESIAs have become much more than this. The main ESIA risk is now more akin to a test of a project?s legitimacy ? i.e., with more weight placed on the social licence, or the political test of moral authority ? with the process involving stakeholders from multiple backgrounds and disciplines, including some anti-development NGOs/civil society groups with their views on mining, (particularly in developing nations), often already pre-determined. Within the backdrop of this potential maelstrom, now enter a proposal for a new industry (such as deep sea mineral extraction).

Jan 1, 2011

By James R. Herring

An unusual combination of ten new, deep (-100 m) coreholes and an extensive high-resolution seismic reflection network enables us to produce a detailed study of the phosphorite resources in the Tertiary strata of the Georgia continental shelf. These strata are mixtures of a terrigenous facies, notably quartz and clay along with minor amounts of other aluminosilicate minerals, and of a marine facies, notably phosphorite and carbonate. Phosphatic sediments occur throughout the cores, however the richest phosphorite beds are in the middle Miocene (Serravallian) sediment, where they constitute up to 70 percent of the sediment mass. Major zones of phosphate enrichment occur chiefly at major unconformity boundaries (tops of Oligocene, lower and middle Miocene, upper Miocene, and lower and upper Pliocene) and at prominent intrastratal reflectors representing minor unconformities within units. Phosphorite co-occurs with the clay minerals, especially palygorskite, but correlates inversely with carbonate and detrital quartz, indicating a low-energy depositional environment. The clay minerals present in these strata, which have an environmental consequence on recovery of the phosphorite, are varying concentrations of smectite, kaolinite, mica, palygorskite, and sepiolite. Phosphatic resources have been determined within only the Miocene strata. Sediment volume for this unit to the 100 m isobath on the continental shelf has been established using the high-resolution seismic reflection network that has been calibrated using the deep coreholes. Phosphorite grains larger than 0.1 mm average about 40% of the sediment. In turn, most of the remainder of the sediment in this size range is quartz, which is separable from phosphate grains using conventional flotation techniques. Our estimate is that 300 Gt of phosphorite lie within the Miocene strata of the Georgia continental shelf.

Jan 1, 1994

By Irina A. Pulyaeva

Hydrogenetic Fe-Mn crusts play an important role in marine mineral-deposit research because of their widespread occurrence and high concentrations of valuable and rare metals. Most Fe-Mn crust deposits occur on the tens of thousands of seamounts found in the global ocean as well as on ridges and plateaus. Because of these circumstances, it is essential to clarify a number of outstanding issues with regard to Fe-Mn crust history and development, including controls on metal sources and concentrations. The first-order characteristics of Fe-Mn crusts as potential ore deposits include concentrations of metals (grade) and the thickness of crusts (tonnage), which vary depending on Fe-Mn crust structure and texture. Data on the structure, composition, age, and deposit characteristics will help define which factors are key for the creation of mineral accumulation and which combination of factors leads to the formation of potentially economic concentrations of metals. In this paper, we address the structure and characteristics of Fe-Mn crust stratigraphic sections collected from Central and Western Pacific seamounts. We describe the changes in mineralogical and chemical compositions of crust layers of different ages, the occurrence and regional distribution of these layers that correlate regionally, and reconstruct the paleoceanographic conditions that influenced crust growth.

Jan 1, 2010

By Karstein Vestgard

During the last few years autonomous underwater vehicle (AUV) technology has evolved from concept demonstrators towards commercial products. The driving forces are the move for energy exploitation towards deeper waters, naval applications and the Internet driven need for more intercontinental underwater communication cables. Other applications emerging for the future will be within environmental research and monitoring and deepwater exploration. Deepwater developments beyond the continental shelf will require the same level of survey data quality and intervention access as established for shallow water. The potential for cost savings is two folds. Firstly, there is a reduction in the survey cost it self and secondly there is a considerable cost saving by avoiding over design of subsea installations due to lack of sufficient documentation of the field. In this scenario, there is an increasing understanding that underwater robotics and in particular AUVs will play an important role in future survey and subsea engineering work. The AUV as a free swimming underwater survey sensor carrier has several advantages compared to cable controlled ROV?s and deep towed systems: The paper prepared for the ?Underwater Mining Institute 2003? on Jeju Island, Korea will focus on the HUGIN AUV concept and field results to date.

Jan 1, 2003

By Hjalmar Thiel

Issues of deep-seabed mining are discussed since four decades and extensive efforts have been invested in oceanographic studies related to environmentally sound harvesting of polymetallic nodules. Because mining on the deep seafloor seems to range from large-scale, two-dimensional dredging or scooping up of the ore from the uppermost surface sediment layer to more localized drilling or deeper digging into a three-dimensional ore body, it appears to be justified to reconsider some concepts for environmental impact evaluation. Based on the experience gained during preceding years in environmental studies related to polymetallic nodule mining, some interrelated hypotheses and proposals will be presented. It is suggested that these proposals be considered in future plans for environmental impact evaluation and that observations on community re-establishment be conducted before massive sulphide mining or other ore extractions enter the commercial mining phase.

Aug 24, 2006

By Janine Lahr, Peter E. Halbach

The Manus Spreading Ridge is located within the EEZ of Papua New Guinea and lies in the Manus Basin ENE of the PNG Island and N of the Island New Britain. The divergent backarc spreading system is caused by the subduction of the Solomon plate in the South under the Bismarck plate in the North along the lineament of the New Britain trench. The rate of divergence is relatively high compared to other back arc spreading systems and amounts up to 12 cm/year [3]. Since submarine volcanism and associated hydrothermal circulation as important parts of the oceanic heat transfer system are also dependent on the rate of spreading, hydrothermal fluid venting and respective deposition of polymetallic sulfides can be expected there. In late 1985 first indications for hydrothermal activity were observed on a swell within the central rift valley of the Manus Spreading Centre during a photographic survey of the seafloor by an expedition of the Hawaii Institute of Geophysics with the American RV Moana Wave [1]. Detailed geological investigations including successful sampling were first carried out in June 1990 within the scope of the OLGA II research project (conducted by Prof. Tufar, Marburg) using the German RV Sonne equipped with a deep-sea television sledge and Tvcontrolled grab systems. Simultaneously a research cruise with the Russian RV Akademic Mstivlav Keldysh took place using the manned submersible Mir; the findings of the OLGA II cruise were immediately used for planning and organization of the Mir dives [3]. The massive sulphide samples which we used for our geochemical and mineralogical studies originate from the hydrothermal fields 1 and 2 and are from grab stations of the OLGA II expedition [4].

Sep 24, 2006

By Tobias Hens, Andrew Frierdich, Barbara Etschmann, Joël Brugger, Barrie Bolton

"Advancing our knowledge about trace metal distribution and abundance provides insight into formation, alteration, and trace element enrichment processes of ferromanganese nodules and crusts. A fundamental understanding of these mechanisms, in turn, has implications for the selective recovery of critical metals and the development of sustainable hydrometallurgical techniques. Synchrotron-based X-ray Fluorescence (SXRF) is a powerful, state-of-the-art analytical tool that can examine geochemical features of Fe-Mn nodules and crusts, such as abundance and distribution of trace elements, in an integrated and efficient manner. By correlating trace element composition and Mn oxidation states in these highly complex samples, it can be determined whether these parameters are related to the Mn oxide mineralogy (vacancy content of crystal lattice) and chemistry.In this study, eleven Fe-Mn nodule and crust samples from three circum-Australian locations – the South Tasman Rise, Lord Howe Rise, and Coral Sea – were analyzed at the Australian Synchrotron, Victoria, Australia. Micrometer-scale spatial resolution of geochemical features, such as concentric growth structures and element distribution, was achieved with high sensitivity (Fig. 1). For instance, Ni could be detected at 10's of ppm to 1 wt% levels. Information on other redox-sensitive trace elements, which are present at 10-1000 ppm levels (e.g., Cu, Co, Ti), were gained by means of fully quantitative elemental composition maps."

Jan 1, 2017

By Daniel Brutto

Environmental considerations are a key driver within the marine mining consenting process across different national and international legislative regimes and are critical in shaping the global public perception of the industry. As a result, it is vital that mining companies seeking to operate within marine environments establish a robust understanding of the sensitivities of the seabed environments in which they are active, the impacts of their activities and the ability of the environment to recover from these impacts. The significant risks of failing to do so include an inability to either obtain or maintain operating permits. The risks can be mitigated by the common application of existing seabed biological expertise in baseline assessment and monitoring. The key ingredients of a fit-for-purpose, cost-effective seabed ecological assessment include early consideration of ecological issues within the project life-cycle through undertaking detailed desk-top studies as-wellas the multiple-use of data that have been acquired as a consequence of prospecting processes, with such data including remote acoustic data, seabed imagery and sediment samples. These data can be used to inform the design of robust benthic baseline surveys which provide adequate information on the ecological character of the environment in question and habitats and species of conservation importance - decreasing project risk and increasing the likelihood of securing consent.

Sep 14, 2011

By S. Jeffress Williams

The U.S. Geological Survey (USGS), over the past three decades, has carried out a spectrum of geologic surveys and research in marine areas of the Exclusive Economic Zone (EEZ) around the U.S. and its territories as well as in the Great Lakes region. Regional and topical studies have been undertaken throughout the range of marine environments: estuarine, tidal wetlands, coastal and nearshore, shelf, slope, and the deep ocean basins. The Survey's coastal and marine research programs consist of four elements shown in Table 1. The first includes studies using interpretations of bathymetry, seismic-reflection and sidescan sonar data, and analyses of sediment grab samples and cores to develop an understanding of the geologic framework. Information on the geologic setting, including the subbottom structure and stratigraphic relationships, and the geologic history and evolution of the areas surveyed are important parts of the program objectives.

Jan 1, 1992

By Will Roberts, M. E. Williamson

After verification of methodology and testing of prototype systems during 2005/06, Nautilus Minerals expanded their Papua New Guinea (PNG) operations to a full commercial exploration program in 2007. Included was the deployment of sensors and survey systems to locate, characterize and verify massive sulfide deposits with potential as mine sites within the tenements held by Nautilus in PNG. This presentation discusses some of the gear developed and operated during the 2007 PNG investigation.

By Siân E. Boyd

Studies of benthic recolonization in the aftermath of marine aggregate dredging in the U.K. and elsewhere are limited and are largely confined to experimental circumstances. Investigations of the physical and biological status of licensed extraction sites in the U.K. at various times following cessation of commercial dredging are very limited, and so judgments as to the likely progress towards environmental restoration and the time-scales involved continue to be based on predictions rather than real data. This field-based research programme was commissioned to enhance the understanding of processes leading to physical and biological recovery of the seabed following dredging, thereby aiding the identification of practices to minimize environmental harm at licensed sites, and to promote rehabilitation on cessation. The outcome of survey work will have the notable benefit of allowing questions about the present status of locations hitherto subject to commercial exploitation to be answered directly, rather than by inference.

Jan 1, 2002

By Jonguk Kim

Hydrothermal exploration aboard the R/V Onnuri was performed along the northern Central Indian Ridge (CIR) between 8°S and 12°S in January 2010. The main objectives of this first Korean research cruise on mid ocean ridge system was 1) to understand the nature of spreading segments of the northern CIR area, where no systematic survey have been operated before, by mapping and sampling of volcanic rocks and 2) to discover new hydrothermal venting along the spreading center of northern CIR. During the first leg (IR09 Leg1) bathymetric data, in ~50 km width, were collected by multibeam echo sounding system (EM120), which reveals the exact location and structure of axial rift valley of northern CIR between ~ 8°S and 17°S. Then, rock sampling and CTD casts and tows were performed in northern half of the multibeam survey area in the second leg (IR09 Leg2). The results of bathymetric survey clearly display ocean core complex between 10°S and 11°S. The ocean core complex is featured by topographic-high area with corrugated surface. Lineament of corrugations of the ocean core complex are clearly perpendicular to abyssal hill direction which are triggered by symmetric-normal faults. Symmetrical and asymmetrical segments are characterized by parallel abyssal hills and ocean core complex and/or subparallel abyssal hills, respectively. Geochemical analyses of basaltic glasses from spreading axis show geographic trend of increasing of incompatible elements north to south along the spreading axis, which might be influenced by Reunion hotspot plume. However, local but clear enrichment of incompatible elements is observed in volcanic lava from segment 2, which suggests possible local mantle heterogeneity of uncertain source. Lots of serpentinite and gabbroic rocks with coarse-grained feldspar was recovered in the ocean core complex. Ultramafic and/or mafic rocks indicate the gentle-domed block was traveled from upper mantle. Along the spreading axis of the northern CIR, significant hydrothermal plume signatures were detected by CTD castings and tows. Plume signatures were observed at all 5 surveyed segments, suggesting vigorous hydrothermal activities along the northern CIR. However, the optical signals (light transparency and backscattering) of the nearly every cast along the axial valley of the CIR showed increased background level, which might be due to higher level of suspended particles within the axial valley not only by widespread hydrothermal plumes but also by other processes like resuspension. Onboard dissolved methane analysis indicates that the greater part of the plume signals are originated from hydrothermal venting, not by resuspension. However, more detailed examination, including analyzing additional hydrothermal tracers, need to distinguish actual hydrothermal plume signature.

Jan 1, 2010

By Peter Halbach

Hydrothermal activity is well known from many locations on most mid-ocean ridges, however no hydrothermally mineralized area had yet been found at the ultraslow spreading southwest Indian Ridge up to October 98 when the Japanese RV Yokosuka with the submersible Shinkai 6500 investigated this area. A massive sulfide field was discovered near 27º51S / 63º56 E in the 11th segment west of the Rodriguez Triple Junction. The Free University of Berlin had joined this cruise and taken over the responsibility for the study of the respective sulfide mineralizations. Hydrothermal minerals were sampled during two dives at water depth of about 2940 m close to the summit of an axial volcanic ridge called Mount Jourdanne. There massive sulfides occur on the seafloor as small smooth mounds with an average area of about 5 m2. Their surfaces are weathered and have a reddish to brownish colour. In addition to these mound-like structures, small tube-like chimneys were observed. These chimneys rise approximately 30 to 40 cm above the floor and are less than 10 cm in diameter. No indications of hydrothermal fauna could be detected. All the hydrothermal features are spatially related to faults and smaller fissures controlled by an E-W trending graben system crossing the summit region of the submarine volcano. Such tectonized areas are generally considered to be ideal for hydrothermal activity because they may have both a magmatic heat source in the deeper underground and pathways for fluid circulation, respectively.

Jan 1, 2001

By P. Halbach

Hydrothermal activity is well known from many locations on most mid-ocean ridges, but no hydrothermally mineralized area had yet been found at the ultraslow spreading southwest Indian Ridge up to October 98 when the Japanese RV Yokosuka with the submersible Shinkai 6500 investigated this area. A massive sulfide field was discovered near 27°51S / 63°56E in the 11th segment west of the Rodriguez Triple Junction. The Free University of Berlin had joined this cruise and taken over the responsibility for the study of the respective sulfide mineralizations. Hydrothermal minerals were sampled during two dives at a water depth of 2940 m close to the summit of an axial volcanic ridge called Mount Jourdanne. Massive sulfides occur on the seafloor as small smooth mounds with an average area of about 5 m2. Their surfaces are weathered and have a reddish to brownish colour. In addition to these mound-like structures, small tube-like chimneys were observed; these chimneys rise approximately 30 to 40 cm above the floor and are less than 10 cm in diameter. No indications of hydrothermal fauna could be detected. All the hydrothermal features are spatially related to faults and smaller fissures controlled by an E-W trending graben system crossing the summit region of the submarine volcano. Such tectonized areas are generally considered to be ideal for hydrothermal activity because they may have both a magmatic heat source in the deeper underground as well as pathways for the fluid circulation.

Jan 1, 2002

By Tetsuo Yamazaki

Seafloor massive sulfides have been a subject of interest for profitable commercial mining these ten years. Because of the higher Au, Ag, and Cu contents, they have received much attention as immediate commercial mining targets by private companies and nations. Some of them already proposed the technologies necessary for the commercial mining. However, the technologies for survey, excavation, lifting, and ore dressing have not yet well been examined from viewpoint of the economy. In this presentation, the authors present some key factors and improvements for better economy in the mining.

Jan 1, 2010

By Harald Brekke

On 13 July 2000, the ISA adopted the Regulations on Prospecting and Exploration for Polymetallic Nodules in the Area. The first contracts for such exploration were issued by the ISA the same year. The duration of exploration contracts is 15 years, after which the contractors are expected to go into exploitation. In 2013, ISA with the LTC initiated the process for developing the regulations for exploitation, and are currently working on the first draft to put forward for the Council. In the meantime, the first seven exploration contracts have expired, and been given five years extensions in order for the contractors to get ready to apply for exploitation contracts. According to the current draft of the exploitation regulations, an application for an exploitation contract shall be accompanied by all data acquired during the exploration phase, a mining plan, a financing plan, and a set of environmental plans (i.e. an environmental impact statement, an emergency response and contingency plan, environmental management and monitoring plan, and a closure plan). All of these plans have to be based on substantial scientific and technical data and information. The mining plan requires geoscientific data regarding the mineralogy and grade of the nodules, and the physiography of the mining site as a basis for the consideration of critical aspects, inter alia for making reliable resource estimations, design the mining operations, and forecast revenues. The environmental plans require the input of a substantial set of bioscientific data and information on the exploitation technology in order to establish base-lines, and monitor and evaluate the effects of the mining operations. Under the exploration contracts, such scientific data have been acquired and reported on an annual basis to the ISA. Some testing of mining equipment and experiments on the extraction of metals have also been performed by some contractors. These scientific and technical data from the exploration phase will be the basis for the for the preparation of the studies, plans and documents required for the applications for exploitation. No time frame is specified for the preparations of an application but it must be assumed to take place before the expiration of the exploration contract.

Jan 1, 2018