Search Documents

The sampling of a run-of-mine (ROM) ore with the objective of controlling the fundamental variance associated with the sampling step is a poorly understood subject. Finding the effective sampling constant by repetitive sampling to establish the variance between nominally identical subsamples of a given mass of the ore is a laborious, time-consuming and very expensive exercise. In this paper, the run-of-mine ore is modelled using three components: ore, waste, and relatively fine material which shows significant liberation of the mineral phase(s) carrying the target analyte. The expression for the sampling constant of the mixture is developed from first principles. The form of the equation provides insight into the factors that are important in controlling the magnitude of the sampling constant and hence the fundamental uncertainty associated with a given mass of sample. The controlling factors are shown to be the size distribution of the ore/waste mixture, the proportion of waste mixed with the ore and the extent of liberation and the size distribution of the liberated material in the finer fractions.

Jan 1, 2008

Because of the work of the pioneers of sampling theory, we know the principles, test work and equations to use to design sampling systems to meet targets for precision and accuracy. However, we do not see such æproperÆ systems deployed everywhere a sample is obtained around mineral processing plants. In many cases, we do not have solutions that satisfy all of the theoretical, economic and practical considerations. There are some well-known problems, such as high-volume streams with wide size distributions combined with a sparse valuable component that is heterogeneously distributed (such as gold ore SAG mill feeds). However, other difficult sampling issues are common, such as streams which vary widely over a day in flow rate and slurry density (many flotation concentrates), and loaded CIP carbon on transfer to elution. Inventory measurement issues abound, especially for leaching operations where daily inventory change is significant for metallurgical accounting. The result is that operators realise that although they issue reports daily, they do not know what is actually going on in their plant on a daily basis with sufficient confidence to quickly diagnose problems or confidently predict the benefits of potential enhancements. The industry needs practical and economic solutions that can be awarded the ætheoretically correct samplerÆ tick in order to better understand and optimise their processes.

Jan 1, 2008

Continuous improvement in environmental management assists in the achievement of sustainability goals for the mining and processing of minerals. The use of regular internal environmental audits (scored or unscored) which form an integral component of an Environmental Management System (EMS), provide demonstrable evidence of this improvement. The audits described in this paper involve working with site personnel to develop and implement major improvement projects, providing advice on how to improve environmental practices and facilities, and disseminating innovative ideas and practices across the site and to other operations within the same group. Essentially the lead auditor assumes the role of a æskills coachÆ as opposed to a æpolicemanÆ, which is quite often the case for many audits. The audit process has been developed from involvement with a number of major coal mines in the Hunter Valley, where regular internal environmental audits have been undertaken every two to three months, over periods varying from 18 months to five years and more recently, with a metalliferous mine in the Northern Territory. Examples of the benefits of improved environmental performance (driven by the audit process) to sustainable development are provided. The auditing process as described is applicable to metalliferous mines, the processing of mineral ores, coal mines, coal handling and preparation plants, quarries, and oil and gas projects.

Jan 1, 2004

Over the past five years, dedicated tertiary mining engineering programs have become financially unsustainable in Australia on the basis of undergraduate enrolments alone. The situation is worse in other minerals related disciplines and extends to the technical minerals education sector. This paper reviews the causes for the current situation. Indicators are presented which suggest that enrolment trends can no longer be attributed only to business cycles in the minerals industry but are also reflective of a fundamental shift in student interest in the sciences and resources based engineering disciplines. Reactive responses to changing trends are diluting and compromising the quality of mining engineering education. It is unlikely that the trends can be reversed or resisted. Tertiary minerals educators need to position themselves so that they can be responsive to on-going change. Two proposals are offered which aim to anchor mining engineering in a long-term sustainable manner. The proposals have a common educational component which is concerned with restructuring how mining engineering programs are presented and providing more flexible access to such programs. However, the two proposals have significantly different commercial components. The commercial component of first proposal is concerned with working within the traditional education framework of universities to endow a critical number of core staff positions. It effectively equates to fund raising. The second proposal is concerned with developing a stand-alone commercial operation around the education and research advantages of the global and multi-disciplinary university system. As a shareholder in this business, a university department would earn dividends that it could then use to support its education initiatives. This proposal provides a performance-based mechanism for supporting university minerals programs and has the potential to be cost-neutral. Both proposals are suited to resource sharing with a select number of international mining schools and to the incorporation of the other tertiary minerals disciplines under threat.

Jan 1, 2000

The Effect of Grinding Aids on Laboratory Grinding of a Cassiterite-Polymetallic Sulfide Ore

Sep 13, 2010

This paper passes on some personal insights into what helps to make a well-executed feasibility study. Lessons learned are illustrated with examples from the authorÆs experience. Lessons include the place of the preliminary feasibility study, credibility, ore reserves, the use of expert consultants, responsibilities and challenges for the ownerÆs representative, technical tools for the study manager, the human side of project organisation and dealing with technical auditors.

Jan 1, 1998

Escondida is a state-of-the-art copper mining operation. It is the major copper project of the 1990s and is the largest new investment in the industry - a US$823 million project. It accounts for about six per cent of Chile's total exports, making Escondida the largest private exporting company in Chile.

Jan 1, 1992

By Brown AP

Comparison of legal permits required for mining (as opposed to prospecting or exploration) in New Zealand, under the Mining Act 1971 and the Resource Management Act/Crown Minerals Act 1991. Mining generally receives the same treatment as any other industrial or commercial activity.

Jan 1, 1995

By Schulz R. S, Staunton W. P, McGuire J

The increased activity in the Australian gold industry over the last decade has resulted in a concomitant increase in the use of sodium cyanide, with a projected consumption of 80,000 tonnes per annum by 1991. Growing environmental awareness by government, industry and the public has generated increased interest in the fate of cyanide near gold mine tailings dams and has highlighted the lack of basic knowledge in this area, particularly for Australian conditions.

Jan 1, 1991

A method of assessing the blastability of a rock mass is presented which makes use of five, readily available, simple parameters. These are the Rock Mass Description, Joint Plane Spacing, Joint Plane Orientation, Specific Gravity Influence and Hardness. For a particular rock mass a value is assigned to each parameter and the Blastability Index is calculated from these values. Application of the Index in blast planning and computer modelling is discussed.

Jan 1, 1986

By D C. Ibana

The use of electrostatic fields to effect phase dispersion and agitation in solvent extraction (SX) has demonstrated many advantages over conventional mechanical methods and is therefore a very real alternative. Despite this, an industrial application of the technique is yet to be developed. Here, the several variations of the technique that have been proposed are reviewed, the state-of-the-art assessed and key limitations to a commercial application outlined.

Jan 1, 2006

The paper considers the factors that will control the importance and the nature of R & D required by the Australian mineral industry over the next decade. The process required to determine the appropriate priorities for research and how it must be managed is described. The work of the Australian Mineral Industries Research Association is used to illustrate this process.

Jan 1, 1986

Minerals are of course important to our way of living and hence the search and exploitation of minerals has always had a high priority in Australia. Metal mining commenced in South Australian in the 1840s when silver-lead and copper were first mined. This was Australia's earliest mining era and led to the rush that never ended. This and subsequent mining periods have had significant, widespread impact on local and national economic development, settlement, and social conditions.

Jan 1, 1993

The success of the In-Plant dust collection at the Albion Reid Quarry Plant situated at Para Hills, South Australia, is discussed in the light of co-operation at the design stage with particular emphasis on the duct- work and filter design. Other dust control facilities at the Plant are mentioned.

Jan 1, 1976

The grades of alluvial ore deposits are low compared with grades of hard rock mining. This factor, combined with other parameters of irregular distribution of particles, bedrock irregularities, size of particles, nugget effect, ore characteristics, and wet horizons, combine to place alluvial deposits among the most difficult to evaluate, and on which to establish an ore reserve with a high degree of confidence. With increased geological input, correct selection and implementation of sampling method, due regard to sample representativity and process design, these confidence levels can be achieved.

Jan 1, 1987

The traditional form of project financing for resource related projects has involved project financings structured with either recourse to the project sponsor(s) or commercial banks accepting the project's risks, usually after project completion, subject to, inter alia, the nature of the project, geographical location, quality of the projected cash flows and commodity price outlook. However, the concept of commodity-linked borrowings hasadded a new dimension for borrowing opportunities for resource-oriented projects and or companies.

Jan 1, 1985

Circuit alterations and adoption of more compact items of equipment have made it possible to increase the capacity of the King Island Scheelite concentrator, both with regard to head grade and feed tonnage, while at the same time increasing total recovery and reducing maintenance costs. The present operation is described, with particular emphasis being placed on alterations made during the last two years to achieve capacity Goals.

Jan 1, 1977

The Pacific Rim countries of Australia, New Zealand, Papua New Guinea, Indonesia, Fiji, Philippines and Solomon Islands will be reviewed from an equity investors perspective. The following areas will be covered: ò Country risks ò Exploration spending and activity ò Project development ò Taxation ò Relative cost of doing business ò Environmental considerations ò Political/bureaucratic situations ò Capital raising ò Equity markets as a source of funds ò Developing market funds The aim of the paper will be to outline the most attractive areas for investment by equity and private funds plus documenting the changes needed in the less favourable countries if they are to attract investors.

Jan 1, 1995

The development of metallurgical training is briefly reviewed. The reasons for the current trend for Metallurgy Schools to become Schools of Materials Engineering or Materials Science are mentioned as is the role of Departments of Chemical Engineering in the teaching of extraction metallurgy. Some problems on academic staff recruit- ment are highlighted and predictions concerning future difficulties in industry getting adequately trained professional staff are made. The need for a special effort to attract and retain the best undergraduate students is put Forward.

Jan 1, 1987

New and more cost-effective methods of haulage and hoisting will be needed to develop the underground mines of the future. A review of the development of technology since the 1950s shows that once mechanised equipment became available it took 25 years for appropriate mining methods to be developed and the equipment made reliable, then a further 25 years to reach todayÆs level of automation and reliability. Suggestions are made about possible areas for ongoing research with the observation that there is little research worldwide into disruptive technologies. A call is made for better organisation and presentation of the opportunities and potential benefits of new underground mining technologies.

Jan 1, 2005